Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

Kennametal Hizmetinizde

Müşteri Destek

Bütün dünyadaki müşteri destek iletişim detaylarını bulun.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Ürün(ler) are being added to the cart
Sepeti Görüntüle
Çok geç olmadan bu özel tekliflerden faydalanın! Şimdi Satın Alın

End Mills for High-Performance Dynamic Milling

Düşük radyal temaslı giriş ve tam kesme boyu özellikli dinamik frezeleme için tasarlanmıştır

CAM takım yolu oluşturma yazılımı kullanılarak 5 eksenli tezgahların kapasiteleri en üst düzeye çıkarılır. 

KOR 5DA for Aluminum

 Tescilli kanal biçimleri titreşimleri azaltır ve takım ömrünü uzatır. 

  • Alüminyum için dinamik kaba işleme takımı.
  • Talaş yarıcılar sayesinde mükemmele yakın talaş yönetimi.
  • Safe-Lock™ şaftlar, takımın istemdışı dışarı çıkmasını engeller.
  • İçten soğutmalı ve dıştan soğutma sıvısı beslemeli tipler mevcut.
  • İçten soğutma, talaşların kesme bölgesinden atılmasına ve ısının düşürülmesine yardımcı olur.
  • 5 kesme kenarı, yüksek ilerleme oranları ve yüksek talaş kaldırma oranları sağlar.
  • Talaş kırıcılar talaş boşalmasını etkin biçimde yönetir.
  • Tescilli kanal biçimi, soğutma sıvısı akışı, talaş boşalması ve 3 x D maksimum kesme derinliği sağlar.
  • Alüminyum uygulamalarda %66’ya kadar daha yüksek tabla ilerlemesi
  • Safe-Lock™ Şaft parmak frezenin istemdışı dışarı çıkmasını önler.

KOR 5DS for Steel & Stainless Steel

 Titreşimi en aza indirgemek ve takım ömrünü en uygun duruma getirmek üzere hedef malzemeye göre uyarlanmış helis açıları. 

  • Çelik ve paslanmaz çelik için dinamik kaba işleme takımı.
  • Talaş biçim değiştiriciler sayesinde yüksek yüzey kalitesinde mükemmele yakın talaş yönetimi.
  • Takımın istemdışı dışarı çıkışını engelleyen Safe-Lock™ ve Weldon® şaftlar.
  • Düz ve Weldon şaft özellikli 3 x D ve 5 x D.

KOR 6DT for Titanium

 Helisel ve rampalama işlemlerinde maksimum takım ömrü için alın ucu geometrileri. 

  • Titanyum için dinamik kaba işleme takımı.
  • Talaş yarıcılar sayesinde en uygun duruma getirilmiş talaş yönetimi.
  • Düz ve Weldon şaft özellikli 3 x D ve 5 x D.
Filtreleri Seçin
Filtreler
Filtreler
    Filtreleri şurada görüntüle
    Metrik
    İnç
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (92)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(92)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(92)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(92)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(92)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(92)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(92)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(92)
    • M Stainless Steel (92)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(92)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(92)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(92)
    • K Cast Iron (92)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(92)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(92)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(92)
    • N Non-Ferrous Materials (120)
      • N1
        Wrought Aluminum (120)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(120)
    • S High-Temp Alloys (92)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(92)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(92)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(92)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(92)
    • H Hardened Materials (92)
      • H1
        Hardened Materials 44-48 HRC(92)
      • H2
        Hardened Materials 48-55 HRC(92)
    Applications
    Applications
    • PocketPocket (40)
    • Pocket HelicalPocket Helical (212)
    • Pocket MillingPocket Milling (212)
    • RampingRamping (80)
    • Shoulder MillingShoulder Milling (212)
    • Shoulder RoughingShoulder Roughing (99)
    • Shoulder Square EndShoulder Square End (212)
    • Trochoidal MillingTrochoidal Milling (191)
    Cutting Diameter
    Cutting Diameter
    • 0.25 in(4)
    • 0.315 in(8)
    • 0.375 in(20)
    • 0.3937 in(20)
    • 0.4724 in(23)
    • 0.5 in(20)
    • 0.625 in(20)
    • 0.6299 in(20)
    • 0.75 in(23)
    • 0.7874 in(17)
    • 0.9843 in(17)
    • 1.0 in(20)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 6.35 mm(4)
    • 8.0 mm(8)
    • 9.525 mm(20)
    • 10.0 mm(20)
    • 12.0 mm(23)
    • 12.7 mm(20)
    • 15.875 mm(20)
    • 16.0 mm(20)
    • 19.05 mm(23)
    • 20.0 mm(17)
    • 25.0 mm(17)
    • 25.4 mm(20)
    Cutting Diameter Min-Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 19.05 mm(2)
    • 24.0 mm(4)
    • 28.575 mm(12)
    • 30.0 mm(12)
    • 31.75 mm(2)
    • 36.0 mm(14)
    • 38.1 mm(12)
    • 40.0 mm(4)
    • 47.625 mm(20)
    • 48.0 mm(12)
    • 50.0 mm(8)
    • 57.15 mm(14)
    • 60.0 mm(19)
    • 63.5 mm(8)
    • 75.0 mm(10)
    • 76.2 mm(12)
    • 79.375 mm(8)
    • 80.0 mm(8)
    • 95.25 mm(9)
    • 100.0 mm(7)
    • 125.0 mm(7)
    • 127.0 mm(8)
    Cutting Length Min-Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.75 in(2)
    • 0.9449 in(4)
    • 1.125 in(12)
    • 1.1811 in(12)
    • 1.25 in(2)
    • 1.4173 in(14)
    • 1.5 in(12)
    • 1.5748 in(4)
    • 1.875 in(20)
    • 1.8898 in(12)
    • 1.9685 in(8)
    • 2.25 in(14)
    • 2.3622 in(19)
    • 2.5 in(8)
    • 2.9528 in(10)
    • 3.0 in(12)
    • 3.125 in(8)
    • 3.1496 in(8)
    • 3.75 in(9)
    • 3.937 in(7)
    • 4.9213 in(7)
    • 5.0 in(8)
    Cutting Length Min-Cutting Length Max
    Reach
    Reach
    • 1.4567 in(4)
    • 1.7283 in(4)
    • 2.2717 in(4)
    • 2.815 in(3)
    • 3.4941 in(3)
    Reach Min-Reach Max
    Reach
    Reach
    • 35.7 mm(3)
    • 37.0 mm(4)
    • 43.9 mm(4)
    • 46.315 mm(3)
    • 57.2688 mm(2)
    • 57.7 mm(4)
    • 71.5 mm(3)
    • 75.0 mm(3)
    • 88.75 mm(3)
    • 90.13 mm(3)
    Reach Min-Reach Max
    Connection Style
    Connection Style
    • SAFE-LOCK (112)
    • Straight-Cylindrical (54)
    • Weldon (46)
    Number of Flutes
    Number of Flutes
    • 5 (168)
    • 6 (44)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 2.5 in(2)
    • 2.6378 in(4)
    • 2.9528 in(8)
    • 3.0 in(14)
    • 3.1496 in(4)
    • 3.4252 in(14)
    • 3.5 in(12)
    • 3.937 in(12)
    • 4.0 in(20)
    • 4.0945 in(8)
    • 4.3307 in(4)
    • 4.5 in(4)
    • 4.5276 in(5)
    • 4.7244 in(6)
    • 4.9213 in(8)
    • 5.0 in(18)
    • 5.5 in(12)
    • 5.5512 in(8)
    • 5.6693 in(6)
    • 5.9055 in(4)
    • 6.0 in(8)
    • 6.25 in(5)
    • 6.5354 in(5)
    • 6.6929 in(2)
    • 7.0 in(4)
    • 7.4803 in(2)
    • 7.5 in(4)
    • 7.874 in(5)
    • 8.0 in(4)
    Over All Length [L] Min-Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 63.5 mm(2)
    • 67.0 mm(4)
    • 75.0 mm(8)
    • 76.2 mm(14)
    • 80.0 mm(4)
    • 87.0 mm(14)
    • 88.9 mm(12)
    • 100.0 mm(12)
    • 101.6 mm(20)
    • 104.0 mm(8)
    • 110.0 mm(4)
    • 114.3 mm(4)
    • 115.0 mm(5)
    • 120.0 mm(6)
    • 125.0 mm(8)
    • 127.0 mm(18)
    • 139.7 mm(12)
    • 141.0 mm(8)
    • 144.0 mm(6)
    • 150.0 mm(4)
    • 152.4 mm(8)
    • 158.75 mm(5)
    • 166.0 mm(5)
    • 170.0 mm(2)
    • 177.8 mm(4)
    • 190.0 mm(2)
    • 190.5 mm(4)
    • 200.0 mm(5)
    • 203.2 mm(4)
    Over All Length [L] Min-Over All Length [L] Max
    cornerConfiguration
    Corner Style
    Corner Style
    • RADIUS (182)
    • SQUARE END (30)
    Corner Radius
    Corner Radius
    • 0.0 in(30)
    • 0.008 in(6)
    • 0.015 in(6)
    • 0.02 in(31)
    • 0.03 in(51)
    • 0.039 in(27)
    • 0.059 in(3)
    • 0.06 in(31)
    • 0.079 in(3)
    • 0.09 in(9)
    • 0.098 in(12)
    • 0.12 in(3)
    Corner Radius Min-Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(30)
    • 0.2 mm(6)
    • 0.375 mm(6)
    • 0.5 mm(31)
    • 0.75 mm(51)
    • 1.0 mm(27)
    • 1.5 mm(3)
    • 1.525 mm(31)
    • 2.0 mm(3)
    • 2.275 mm(9)
    • 2.5 mm(12)
    • 3.05 mm(3)
    Corner Radius Min-Corner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K600 (120)
    • KC643M (48)
    • KCSM15 (44)
    Rough Finish
    Rough Finish
    • FBS (200)
    • F (12)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 4.0 (38)
    • 5.0 (12)
    Maximum Ramp Angle Min-Maximum Ramp Angle Max
    frontEnd
    Center Cutting
    Center Cutting
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 6.35 mm(4)
    • 8.0 mm(8)
    • 9.525 mm(20)
    • 10.0 mm(20)
    • 12.0 mm(23)
    • 12.7 mm(20)
    • 15.875 mm(20)
    • 16.0 mm(20)
    • 19.05 mm(23)
    • 20.0 mm(17)
    • 25.0 mm(17)
    • 25.4 mm(20)
    Back-End Diameter Min-Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.25 in(4)
    • 0.315 in(8)
    • 0.375 in(20)
    • 0.3937 in(20)
    • 0.4724 in(23)
    • 0.5 in(20)
    • 0.625 in(20)
    • 0.6299 in(20)
    • 0.75 in(23)
    • 0.7874 in(17)
    • 0.9843 in(17)
    • 1.0 in(20)
    Back-End Diameter Min-Back-End Diameter Max
    No filters matching ""
    KOR5™ <sup>DA</sup> • Square End • 5 Flutes • 3 x D • Plain Shank • Inch
    (1)

    KOR5™ DA • Square End • 5 Flutes • 3 x D • Plain Shank • Inch

    KOR5™ <sup>DA</sup> • Square End • 5 Flutes • 3 x D • Safe-Lock™ Shank • Inch
    (4)

    KOR5™ DA • Square End • 5 Flutes • 3 x D • Safe-Lock™ Shank • Inch

    KOR5™ <sup>DA</sup> • Square End • 5 Flutes • 3 x D • Internal Coolant • Plain Shank • Inch
    (1)

    KOR5™ DA • Square End • 5 Flutes • 3 x D • Internal Coolant • Plain Shank • Inch

    KOR5™ <sup>DA</sup> • Radiused • 5 Flutes • 3 x D • Internal Coolant • Plain Shank • Inch
    (3)

    KOR5™ DA • Radiused • 5 Flutes • 3 x D • Internal Coolant • Plain Shank • Inch

    KOR5™ <sup>DA</sup> • Radiused • 5 Flutes • 3 x D • Internal Coolant • Safe-Lock™ Shank • Inch
    (13)

    KOR5™ DA • Radiused • 5 Flutes • 3 x D • Internal Coolant • Safe-Lock™ Shank • Inch

    KOR5™ <sup>DA</sup> • Square End • 5 Flutes • 3 x D • Internal Coolant • Safe-Lock™ Shank • Inch
    (4)

    KOR5™ DA • Square End • 5 Flutes • 3 x D • Internal Coolant • Safe-Lock™ Shank • Inch

    KOR5™ <sup>DA</sup> • Radiused • 5 Flutes • 3 x D • Plain Shank • Inch
    (3)

    KOR5™ DA • Radiused • 5 Flutes • 3 x D • Plain Shank • Inch

    KOR5™ <sup>DA</sup> • Radiused • 5 Flutes • 3 x D • Safe-Lock™ Shank • Inch
    (13)

    KOR5™ DA • Radiused • 5 Flutes • 3 x D • Safe-Lock™ Shank • Inch

    KOR5™ <sup>DS</sup> • Radiused • 5 Flutes • 5 x D • Plain Shank • Inch
    (6)

    KOR5™ DS • Radiused • 5 Flutes • 5 x D • Plain Shank • Inch

    KOR5™ <sup>DS</sup> • Radiused • 5 Flutes • 5 x D • Weldon® Shank • Inch
    (6)

    KOR5™ DS • Radiused • 5 Flutes • 5 x D • Weldon® Shank • Inch

    KOR6™ <sup>DT</sup> • Radiused • 6 Flutes • 3 x D • Plain Shank • Inch
    (1)

    KOR6™ DT • Radiused • 6 Flutes • 3 x D • Plain Shank • Inch

    KOR6™ <sup>DT</sup> • Radiused • 6 Flutes • 3 x D • Safe-Lock™ Shank • Inch
    (4)

    KOR6™ DT • Radiused • 6 Flutes • 3 x D • Safe-Lock™ Shank • Inch

    KOR6™ <sup>DT</sup> • Radiused • 6 Flutes • 3 x D • Weldon® Shank • Inch
    (5)

    KOR6™ DT • Radiused • 6 Flutes • 3 x D • Weldon® Shank • Inch

    KOR6™ <sup>DT</sup> • Radiused • 6 Flutes • 5 x D • Plain Shank • Inch
    (1)

    KOR6™ DT • Radiused • 6 Flutes • 5 x D • Plain Shank • Inch

    KOR6™ <sup>DT</sup> • Radiused • 6 Flutes • 5 x D • Safe-Lock™ Shank • Inch
    (4)

    KOR6™ DT • Radiused • 6 Flutes • 5 x D • Safe-Lock™ Shank • Inch

    KOR6™ <sup>DT</sup> • Radiused • 6 Flutes • 5 x D • Weldon® Shank • Inch
    (5)

    KOR6™ DT • Radiused • 6 Flutes • 5 x D • Weldon® Shank • Inch

    Scroll Top
    öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
    Select the destination where you want to move -.
    Yeni Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Lütfen geçerli bir ad girin
    Product successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    ISO Katalog Numarası

    ANSI Katalog Numarası

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Pano bilgilerinizi görmek için oturum açmalısınız
    Session expired due to inactivity, please login again
    Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
    ürün(ler) sepete başarıyla eklendi
    Sepeti Görüntüle

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Katalog Numarası Kalite  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk