Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

Kennametal Hizmetinizde

Müşteri Destek

Bütün dünyadaki müşteri destek iletişim detaylarını bulun.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Ürün(ler) are being added to the cart
Sepeti Görüntüle
Çok geç olmadan bu özel tekliflerden faydalanın! Şimdi Satın Alın
Kennametal Top Notch Portfolio Tooling. Three tools on a table.

Sığ Derinliklerin Hassasiyetle Tornalanması

Top Notch, çeşitli tornalama uygulamalarında tutarlı takım performansını, hassas değiştirmeyi ve olağanüstü sıkmayı garanti eden güvenilir bir çözümdür. Takımlama sistemleri olağanüstü yüzey finişleri sunar ve takım ömrünü uzatır.  En zorlu ortamlara dayanacak şekilde tasarlanan kaliteye sahip uçlarımız, stabilite, daha uzun, daha öngörülebilir takım ömrü ve dayanıklılığı sağlayan sağlamlık sağlar. Top Notch takım tutucuları, hem vida açma hem de kanal açma uçlarını kullanarak maliyetlerinizi ve envanterinizi azaltmaya yardımcı olacaktır. Aynı yuva boyutu, farklı kanal genişlikleri ve stilleri sunar. Ayrıca, Top Notch özel ihtiyaçları karşılamak için çeşitli özel profiller oluşturabilir.

Özellikler ve Avantajlar

Top Notch Kaliteleri

Hemen İndirinTop Notch Application Data Cover



Uygulama Verileri Artık Mevcut!

Hemen İndirin
Filtreleri Seçin
Filtreler
Filtreler
    Filtreleri şurada görüntüle
    Metrik
    İnç
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (1703)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1703)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1703)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1703)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1703)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1703)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1703)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1703)
    • M Stainless Steel (1837)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1837)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1837)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1837)
    • K Cast Iron (1279)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1279)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1279)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1279)
    • N Non-Ferrous Materials (1518)
      • N1
        Wrought Aluminum (1510)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1355)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(87)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (1518)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1363)
      • N6
        Carbon, Graphite Composites, CFRP (1355)
    • S High-Temp Alloys (1902)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1902)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1902)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1902)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1902)
    • H Hardened Materials (614)
      • H1
        Hardened Materials 44-48 HRC(614)
      • H2
        Hardened Materials 48-55 HRC(141)
      • H3
        Hardened Materials 56-60 HRC(128)
      • H4
        Hardened Materials >60 HRC(128)
    Applications
    Applications
    • Back BoringBack Boring (496)
    • BoringBoring (1580)
    • Cut-OffCut-Off (8)
    • Face GroovingFace Grooving (2297)
    • FacingFacing (496)
    • GroovingGrooving (2234)
    • ID FacingID Facing (503)
    • ID GroovingID Grooving (2060)
    • ID Thread TurningID Thread Turning (69)
    • OD Thread TurningOD Thread Turning (128)
    • Plunge TurningPlunge Turning (1503)
    • ProfilingProfiling (580)
    • ThreadingThreading (131)
    • TurningTurning (1605)
    Type of Thread
    Type of Thread
    • 60 (188)
    • ACME (123)
    • API (115)
    • API RD (82)
    • BSW (79)
    • BUTTRESS (183)
    • M (41)
    • NPT (79)
    • STUB ACME (79)
    • UN (183)
    • UNJ (79)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (1697)
    • Lightly Interrupted Cut (1789)
    • Smooth Cut (1935)
    • Varying Depth of Cut (1996)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (13)
    • 90.0 (186)
    Tool Cutting Edge Angle Min-Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Bolt-On Head (6)
    • Boring Bar Shank (63)
    • Toolholder (91)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (490)
    • 2.0 (2013)
    Cutting Edges Per Insert Min-Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.625 in(6)
    • 2.1654 in(1)
    • 2.1917 in(1)
    • 2.5 in(4)
    • 2.756 in(2)
    • 3.15 in(2)
    • 3.5 in(4)
    • 3.937 in(4)
    • 4.0 in(3)
    • 4.5 in(16)
    • 4.921 in(11)
    • 5.0 in(16)
    • 5.905 in(1)
    • 5.906 in(20)
    • 6.0 in(39)
    • 6.693 in(11)
    • 7.0 in(2)
    • 7.079 in(2)
    • 7.874 in(4)
    • 7.976 in(1)
    • 8.0 in(5)
    • 9.8425 in(2)
    • 9.879 in(1)
    • 10.0 in(8)
    • 11.811 in(4)
    • 12.0 in(8)
    • 13.7795 in(1)
    • 14.0 in(10)
    • 16.0 in(10)
    Over All Length [L] Min-Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 41.275 mm(6)
    • 55.0 mm(1)
    • 55.67 mm(1)
    • 63.5 mm(4)
    • 70.0 mm(2)
    • 80.0 mm(2)
    • 88.9 mm(4)
    • 100.0 mm(4)
    • 101.6 mm(3)
    • 114.3 mm(16)
    • 125.0 mm(11)
    • 127.0 mm(16)
    • 150.0 mm(21)
    • 152.4 mm(39)
    • 170.0 mm(11)
    • 177.8 mm(2)
    • 179.8 mm(2)
    • 200.0 mm(4)
    • 202.591 mm(1)
    • 203.2 mm(5)
    • 250.0 mm(2)
    • 250.927 mm(1)
    • 254.0 mm(8)
    • 300.0 mm(4)
    • 304.8 mm(8)
    • 350.0 mm(1)
    • 355.6 mm(10)
    • 406.4 mm(10)
    Over All Length [L] Min-Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.001 in(42)
    • 0.002 in(41)
    • 0.003 in(198)
    • 0.004 in(361)
    • 0.005 in(79)
    • 0.006 in(115)
    • 0.007 in(204)
    • 0.008 in(1183)
    • 0.009 in(79)
    • 0.01 in(155)
    • 0.011 in(41)
    • 0.012 in(79)
    • 0.013 in(233)
    • 0.014 in(165)
    • 0.016 in(82)
    • 0.018 in(96)
    • 0.019 in(41)
    • 0.02 in(164)
    • 0.023 in(380)
    • 0.03 in(39)
    • 0.031 in(228)
    • 0.032 in(9)
    • 0.035 in(115)
    • 0.039 in(159)
    • 0.047 in(207)
    • 0.049 in(38)
    • 0.059 in(158)
    • 0.062 in(97)
    • 0.063 in(277)
    • 0.069 in(38)
    • 0.078 in(98)
    • 0.079 in(83)
    • 0.094 in(173)
    • 0.098 in(20)
    • 0.125 in(78)
    Corner Radius Min-Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.025 mm(42)
    • 0.05 mm(41)
    • 0.075 mm(198)
    • 0.1 mm(361)
    • 0.125 mm(79)
    • 0.15 mm(115)
    • 0.175 mm(204)
    • 0.2 mm(1183)
    • 0.225 mm(79)
    • 0.25 mm(155)
    • 0.275 mm(41)
    • 0.3 mm(79)
    • 0.325 mm(233)
    • 0.35 mm(165)
    • 0.4 mm(82)
    • 0.45 mm(96)
    • 0.475 mm(41)
    • 0.5 mm(164)
    • 0.575 mm(380)
    • 0.75 mm(39)
    • 0.775 mm(228)
    • 0.825 mm(9)
    • 0.9 mm(115)
    • 1.0 mm(159)
    • 1.2 mm(207)
    • 1.25 mm(38)
    • 1.5 mm(158)
    • 1.575 mm(97)
    • 1.6 mm(277)
    • 1.75 mm(38)
    • 1.975 mm(98)
    • 2.0 mm(83)
    • 2.4 mm(173)
    • 2.5 mm(20)
    • 3.175 mm(78)
    Corner Radius Min-Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(2127)
    Corner Chamfer Min-Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(2127)
    Corner Chamfer Min-Corner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (233)
    • K420 (207)
    • K68 (304)
    • KB1630 (126)
    • KBH20 (43)
    • KC5010 (370)
    • KC5025 (393)
    • KC5410 (113)
    • KC720 (214)
    • KC730 (410)
    • KC850 (329)
    • KC9110 (19)
    • KCK20 (153)
    • KCK20B (206)
    • KCP10B (243)
    • KCP25B (289)
    • KCP25C (183)
    • KCU10 (386)
    • KCU10B (406)
    • KCU25 (465)
    • KCU25B (484)
    • KD1425 (87)
    • KT315 (145)
    Hand Of Tool
    Hand Of Tool
    • L (68)
    • R (92)
    Wiper Insert
    Wiper Insert
    • N (2322)
    F Dimension
    F Dimension
    • 6.553 mm(2)
    • 7.0 mm(2)
    • 9.52 mm(2)
    • 10.0 mm(1)
    • 10.312 mm(1)
    • 10.785 mm(1)
    • 10.973 mm(2)
    • 11.0 mm(4)
    • 11.1 mm(2)
    • 12.0 mm(1)
    • 12.573 mm(2)
    • 12.7 mm(6)
    • 13.0 mm(2)
    • 14.0 mm(2)
    • 14.148 mm(2)
    • 14.27 mm(1)
    • 14.275 mm(3)
    • 15.875 mm(2)
    • 15.88 mm(2)
    • 16.0 mm(4)
    • 16.256 mm(2)
    • 17.0 mm(4)
    • 17.348 mm(2)
    • 17.475 mm(2)
    • 17.48 mm(2)
    • 19.05 mm(2)
    • 19.431 mm(1)
    • 20.0 mm(2)
    • 22.0 mm(2)
    • 22.225 mm(3)
    • 22.61 mm(2)
    • 25.0 mm(6)
    • 25.4 mm(11)
    • 27.0 mm(4)
    • 28.575 mm(1)
    • 31.75 mm(23)
    • 32.0 mm(12)
    • 32.537 mm(2)
    • 34.925 mm(4)
    • 35.0 mm(1)
    • 38.1 mm(16)
    • 40.0 mm(4)
    • 41.275 mm(4)
    • 50.8 mm(4)
    F Dimension Min-F Dimension Max
    F Dimension
    F Dimension
    • 0.258 in(2)
    • 0.276 in(2)
    • 0.375 in(2)
    • 0.394 in(1)
    • 0.406 in(1)
    • 0.4281 in(1)
    • 0.432 in(2)
    • 0.433 in(4)
    • 0.437 in(2)
    • 0.472 in(1)
    • 0.495 in(2)
    • 0.5 in(6)
    • 0.512 in(2)
    • 0.551 in(2)
    • 0.557 in(2)
    • 0.562 in(4)
    • 0.625 in(4)
    • 0.63 in(4)
    • 0.64 in(2)
    • 0.669 in(4)
    • 0.683 in(2)
    • 0.688 in(4)
    • 0.75 in(2)
    • 0.765 in(1)
    • 0.787 in(2)
    • 0.8661 in(2)
    • 0.875 in(3)
    • 0.89 in(2)
    • 0.984 in(6)
    • 1.0 in(11)
    • 1.063 in(4)
    • 1.125 in(1)
    • 1.25 in(23)
    • 1.2598 in(3)
    • 1.26 in(9)
    • 1.281 in(2)
    • 1.375 in(4)
    • 1.378 in(1)
    • 1.5 in(16)
    • 1.575 in(4)
    • 1.625 in(4)
    • 2.0 in(4)
    F Dimension Min-F Dimension Max
    Minimum Bore Diameter
    Minimum Bore Diameter
    • 0.44 in(2)
    • 0.453 in(2)
    • 0.728 in(2)
    • 0.73 in(4)
    • 0.8 in(1)
    • 0.866 in(2)
    • 0.8661 in(1)
    • 1.0 in(4)
    • 1.024 in(2)
    • 1.125 in(4)
    • 1.339 in(4)
    • 1.375 in(6)
    • 1.7323 in(2)
    • 1.75 in(2)
    • 2.0 in(2)
    • 2.126 in(4)
    • 2.25 in(6)
    • 2.375 in(2)
    • 2.5 in(4)
    • 2.75 in(4)
    • 2.7559 in(1)
    • 3.0 in(4)
    • 3.25 in(4)
    Minimum Bore Diameter Min-Minimum Bore Diameter Max
    Minimum Bore Diameter
    Minimum Bore Diameter
    • 11.176 mm(1)
    • 11.18 mm(1)
    • 11.5 mm(2)
    • 18.5 mm(2)
    • 18.542 mm(4)
    • 20.32 mm(1)
    • 22.0 mm(3)
    • 25.4 mm(4)
    • 26.0 mm(2)
    • 28.575 mm(3)
    • 28.58 mm(1)
    • 34.0 mm(4)
    • 34.92 mm(2)
    • 34.925 mm(4)
    • 44.0 mm(2)
    • 44.45 mm(2)
    • 50.8 mm(2)
    • 54.0 mm(4)
    • 57.15 mm(6)
    • 60.325 mm(2)
    • 63.5 mm(4)
    • 69.85 mm(4)
    • 70.0 mm(1)
    • 76.2 mm(4)
    • 82.55 mm(4)
    Minimum Bore Diameter Min-Minimum Bore Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 mm(152)
    • 11.176 mm(1)
    • 11.18 mm(1)
    • 11.5 mm(2)
    • 18.5 mm(2)
    • 18.542 mm(4)
    • 20.32 mm(1)
    • 22.0 mm(3)
    • 25.4 mm(4)
    • 26.0 mm(2)
    • 28.575 mm(3)
    • 28.58 mm(1)
    • 34.0 mm(4)
    • 34.92 mm(2)
    • 34.925 mm(4)
    • 38.1 mm(4)
    • 41.3 mm(58)
    • 44.0 mm(2)
    • 44.45 mm(2)
    • 47.6 mm(57)
    • 50.0 mm(2)
    • 50.8 mm(2)
    • 54.0 mm(4)
    • 55.88 mm(3)
    • 56.625 mm(49)
    • 57.15 mm(6)
    • 57.2 mm(29)
    • 60.325 mm(4)
    • 63.5 mm(22)
    • 69.85 mm(4)
    • 70.0 mm(1)
    • 76.2 mm(8)
    • 82.55 mm(4)
    • 88.9 mm(565)
    • 127.0 mm(1)
    • 139.7 mm(785)
    • 146.05 mm(3)
    • 174.6 mm(141)
    • 209.6 mm(256)
    • 222.3 mm(66)
    • 333.0 mm(4)
    Minimum Axial Groove Diameter Min-Minimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 in(152)
    • 0.44 in(2)
    • 0.453 in(2)
    • 0.728 in(2)
    • 0.73 in(4)
    • 0.8 in(1)
    • 0.866 in(2)
    • 0.8661 in(1)
    • 1.0 in(4)
    • 1.024 in(2)
    • 1.125 in(4)
    • 1.339 in(4)
    • 1.375 in(6)
    • 1.5 in(4)
    • 1.626 in(58)
    • 1.7323 in(2)
    • 1.75 in(2)
    • 1.874 in(57)
    • 1.9685 in(2)
    • 2.0 in(2)
    • 2.126 in(4)
    • 2.2 in(3)
    • 2.229 in(49)
    • 2.25 in(6)
    • 2.252 in(29)
    • 2.375 in(4)
    • 2.5 in(22)
    • 2.75 in(4)
    • 2.7559 in(1)
    • 3.0 in(8)
    • 3.25 in(4)
    • 3.5 in(565)
    • 5.0 in(1)
    • 5.5 in(785)
    • 5.75 in(3)
    • 6.874 in(141)
    • 8.252 in(256)
    • 8.752 in(66)
    • 13.11 in(4)
    Minimum Axial Groove Diameter Min-Minimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 393.661 in(1957)
    Maximum Axial Groove Diameter Min-Maximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 9999.0 mm(1957)
    Maximum Axial Groove Diameter Min-Maximum Axial Groove Diameter Max
    Countersunk Angle
    Countersunk Angle
    • 20.0 (6)
    • 45.0 (12)
    Countersunk Angle Min-Countersunk Angle Max
    Cutting Direction
    Cutting Direction
    • E (88)
    • S (72)
    Rake Angle Style
    Rake Angle Style
    • NEUTRAL (ZERO) (160)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.0 in(10)
    • 1.231 in(1)
    • 1.235 in(1)
    • 1.29 in(1)
    • 1.5 in(1)
    • 1.88 in(2)
    • 2.0 in(25)
    • 2.5 in(3)
    • 2.52 in(2)
    • 3.0 in(4)
    • 3.16 in(2)
    • 3.75 in(2)
    • 3.7758 in(1)
    • 3.92 in(2)
    • 3.936 in(2)
    • 4.0 in(6)
    • 4.5 in(2)
    • 5.0 in(3)
    • 5.0392 in(2)
    • 6.0 in(6)
    • 6.2992 in(4)
    • 7.0 in(3)
    • 7.874 in(1)
    • 8.0 in(8)
    • 9.0 in(1)
    • 10.0 in(7)
    Maximum Bore Depth Min-Maximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 25.4 mm(10)
    • 31.26 mm(1)
    • 31.3 mm(1)
    • 32.8 mm(1)
    • 38.1 mm(1)
    • 48.0 mm(2)
    • 50.8 mm(25)
    • 63.48 mm(1)
    • 63.5 mm(2)
    • 64.0 mm(2)
    • 76.2 mm(4)
    • 80.0 mm(2)
    • 95.25 mm(2)
    • 96.0 mm(1)
    • 100.0 mm(4)
    • 101.6 mm(6)
    • 114.3 mm(2)
    • 127.0 mm(3)
    • 128.0 mm(2)
    • 152.4 mm(6)
    • 160.0 mm(4)
    • 177.8 mm(3)
    • 200.0 mm(1)
    • 203.2 mm(8)
    • 228.6 mm(1)
    • 254.0 mm(7)
    Maximum Bore Depth Min-Maximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (9)
    • S (60)
    frontEnd
    Clamp Style
    Clamp Style
    • N (198)
    Cutting Width
    Cutting Width
    • 0.0197 in(80)
    • 0.031 in(127)
    • 0.0315 in(84)
    • 0.035 in(37)
    • 0.039 in(70)
    • 0.0394 in(187)
    • 0.041 in(87)
    • 0.047 in(235)
    • 0.0472 in(179)
    • 0.055 in(73)
    • 0.0551 in(86)
    • 0.058 in(77)
    • 0.0591 in(181)
    • 0.062 in(366)
    • 0.0669 in(86)
    • 0.067 in(70)
    • 0.0689 in(165)
    • 0.072 in(108)
    • 0.076 in(34)
    • 0.0768 in(83)
    • 0.077 in(33)
    • 0.078 in(111)
    • 0.0787 in(216)
    • 0.079 in(113)
    • 0.0866 in(163)
    • 0.088 in(187)
    • 0.0886 in(127)
    • 0.094 in(328)
    • 0.097 in(92)
    • 0.0984 in(188)
    • 0.105 in(96)
    • 0.108 in(69)
    • 0.1083 in(178)
    • 0.11 in(88)
    • 0.118 in(119)
    • 0.1181 in(256)
    • 0.122 in(84)
    • 0.125 in(501)
    • 0.126 in(142)
    • 0.1278 in(77)
    • 0.128 in(90)
    • 0.129 in(32)
    • 0.131 in(43)
    • 0.1378 in(169)
    • 0.142 in(92)
    • 0.15 in(51)
    • 0.151 in(75)
    • 0.156 in(143)
    • 0.157 in(81)
    • 0.1574 in(83)
    • 0.1575 in(158)
    • 0.167 in(37)
    • 0.1673 in(92)
    • 0.1772 in(128)
    • 0.178 in(83)
    • 0.185 in(86)
    • 0.188 in(177)
    • 0.189 in(254)
    • 0.192 in(47)
    • 0.195 in(94)
    • 0.196 in(85)
    • 0.1969 in(54)
    • 0.197 in(19)
    • 0.213 in(40)
    • 0.2165 in(20)
    • 0.2166 in(20)
    • 0.2362 in(44)
    • 0.25 in(153)
    • 0.256 in(42)
    • 0.281 in(2)
    • 0.312 in(4)
    • 0.375 in(5)
    • 0.381 in(5)
    • 0.384 in(9)
    Cutting Width Min-Cutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(80)
    • 0.787 mm(127)
    • 0.8 mm(84)
    • 0.889 mm(37)
    • 0.991 mm(70)
    • 1.0 mm(187)
    • 1.041 mm(87)
    • 1.19 mm(125)
    • 1.194 mm(216)
    • 1.2 mm(179)
    • 1.39 mm(72)
    • 1.397 mm(37)
    • 1.4 mm(86)
    • 1.473 mm(77)
    • 1.5 mm(181)
    • 1.57 mm(156)
    • 1.575 mm(321)
    • 1.69 mm(36)
    • 1.7 mm(86)
    • 1.702 mm(70)
    • 1.75 mm(165)
    • 1.829 mm(108)
    • 1.94 mm(34)
    • 1.95 mm(83)
    • 1.956 mm(33)
    • 1.981 mm(111)
    • 2.0 mm(218)
    • 2.007 mm(70)
    • 2.2 mm(163)
    • 2.235 mm(142)
    • 2.236 mm(50)
    • 2.24 mm(72)
    • 2.25 mm(127)
    • 2.387 mm(53)
    • 2.388 mm(305)
    • 2.39 mm(49)
    • 2.464 mm(92)
    • 2.5 mm(188)
    • 2.667 mm(96)
    • 2.74 mm(32)
    • 2.743 mm(37)
    • 2.75 mm(178)
    • 2.794 mm(88)
    • 2.997 mm(119)
    • 3.0 mm(256)
    • 3.099 mm(84)
    • 3.17 mm(97)
    • 3.175 mm(472)
    • 3.18 mm(62)
    • 3.2 mm(142)
    • 3.245 mm(77)
    • 3.25 mm(89)
    • 3.251 mm(42)
    • 3.27 mm(32)
    • 3.32 mm(43)
    • 3.5 mm(169)
    • 3.607 mm(92)
    • 3.81 mm(44)
    • 3.82 mm(43)
    • 3.835 mm(37)
    • 3.84 mm(74)
    • 3.96 mm(96)
    • 3.962 mm(125)
    • 3.974 mm(42)
    • 3.988 mm(81)
    • 4.0 mm(162)
    • 4.242 mm(37)
    • 4.25 mm(92)
    • 4.5 mm(128)
    • 4.521 mm(83)
    • 4.699 mm(86)
    • 4.775 mm(160)
    • 4.78 mm(21)
    • 4.785 mm(23)
    • 4.788 mm(26)
    • 4.8 mm(95)
    • 4.801 mm(238)
    • 4.88 mm(47)
    • 4.95 mm(90)
    • 4.953 mm(45)
    • 4.978 mm(85)
    • 5.0 mm(54)
    • 5.004 mm(19)
    • 5.41 mm(40)
    • 5.5 mm(40)
    • 6.0 mm(44)
    • 6.35 mm(148)
    • 6.36 mm(24)
    • 6.502 mm(42)
    • 7.137 mm(2)
    • 7.925 mm(4)
    • 9.525 mm(5)
    • 9.677 mm(5)
    • 9.754 mm(9)
    Cutting Width Min-Cutting Width Max
    Insert Shape
    Insert Shape
    • PRISMATIC (2)
    • TN-TOP NOTCH (2250)
    Insert Size
    Insert Size
    • 1 (5)
    • 2 (41)
    • 3 (44)
    • 4 (16)
    • 6 (2)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.04 in(1)
    • 0.063 in(2)
    • 0.067 in(1)
    • 0.07 in(2)
    • 0.075 in(1)
    • 0.13 in(1)
    • 0.138 in(39)
    • 0.1382 in(1)
    • 0.21 in(39)
    • 0.25 in(2)
    • 0.294 in(23)
    • 0.3 in(1)
    • 0.334 in(4)
    • 0.415 in(2)
    • 0.4151 in(1)
    Maximum Cutting Depth Min-Maximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 1.016 mm(1)
    • 1.6 mm(2)
    • 1.69 mm(1)
    • 1.78 mm(2)
    • 1.9 mm(1)
    • 3.3 mm(1)
    • 3.505 mm(21)
    • 3.51 mm(19)
    • 5.33 mm(16)
    • 5.334 mm(23)
    • 6.35 mm(2)
    • 7.46 mm(8)
    • 7.468 mm(9)
    • 7.47 mm(6)
    • 7.62 mm(1)
    • 8.484 mm(4)
    • 10.54 mm(1)
    • 10.541 mm(1)
    • 10.543 mm(1)
    Maximum Cutting Depth Min-Maximum Cutting Depth Max
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 0.64 mm(12)
    • 0.76 mm(19)
    • 0.762 mm(138)
    • 1.015 mm(8)
    • 1.016 mm(266)
    • 1.02 mm(8)
    • 1.09 mm(47)
    • 1.092 mm(163)
    • 1.335 mm(15)
    • 1.905 mm(1)
    • 1.97 mm(6)
    • 1.981 mm(6)
    • 2.54 mm(11)
    • 2.75 mm(7)
    • 2.777 mm(3)
    • 2.92 mm(53)
    • 2.921 mm(121)
    • 3.81 mm(70)
    • 3.84 mm(6)
    • 3.86 mm(4)
    Maximum Cutting Insert Depth Min-Maximum Cutting Insert Depth Max
    Maximum Cutting Insert Depth
    Maximum Cutting Insert Depth
    • 0.025 in(12)
    • 0.03 in(157)
    • 0.04 in(282)
    • 0.043 in(210)
    • 0.0526 in(15)
    • 0.075 in(1)
    • 0.078 in(12)
    • 0.1 in(11)
    • 0.108 in(7)
    • 0.1093 in(3)
    • 0.115 in(174)
    • 0.15 in(70)
    • 0.151 in(6)
    • 0.152 in(4)
    Maximum Cutting Insert Depth Min-Maximum Cutting Insert Depth Max
    insertGeometry
    Shape
    Shape
    • PRISMATIC (2)
    • TN-TOP NOTCH (2051)
    Insert Seat Size
    Insert Seat Size
    • 1 (16)
    • 2 (631)
    • 3 (1097)
    • 4 (374)
    • 5 (4)
    • 6 (3)
    Cutting Tool Material
    Cutting Tool Material
    • B H (126)
    • B L (43)
    • D P (87)
    • H T (145)
    • H W (2220)
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (63)
    • BORING BAR HEAD (6)
    • SQUARE SHANK (91)
    Back-End Diameter
    Back-End Diameter
    • 9.525 mm(1)
    • 10.0 mm(1)
    • 12.0 mm(3)
    • 12.7 mm(5)
    • 15.87 mm(1)
    • 15.875 mm(4)
    • 16.0 mm(3)
    • 19.05 mm(4)
    • 20.0 mm(2)
    • 25.0 mm(4)
    • 25.4 mm(8)
    • 31.75 mm(3)
    • 32.0 mm(2)
    • 38.1 mm(4)
    • 40.0 mm(4)
    • 44.45 mm(3)
    • 50.0 mm(1)
    • 50.8 mm(8)
    • 57.15 mm(1)
    • 63.5 mm(7)
    Back-End Diameter Min-Back-End Diameter Max
    Shank Height
    Shank Height
    • 0.375 in(4)
    • 0.394 in(3)
    • 0.472 in(3)
    • 0.5 in(6)
    • 0.6067 in(1)
    • 0.625 in(5)
    • 0.63 in(4)
    • 0.75 in(10)
    • 0.787 in(6)
    • 0.9378 in(1)
    • 0.984 in(8)
    • 1.0 in(18)
    • 1.2134 in(2)
    • 1.25 in(12)
    • 1.26 in(8)
    • 1.5 in(4)
    • 1.5283 in(4)
    • 1.8488 in(1)
    Shank Height Min-Shank Height Max
    Shank Height
    Shank Height
    • 9.52 mm(2)
    • 9.525 mm(2)
    • 10.0 mm(3)
    • 12.0 mm(3)
    • 12.7 mm(6)
    • 15.41 mm(1)
    • 15.875 mm(3)
    • 15.88 mm(2)
    • 16.0 mm(4)
    • 19.05 mm(10)
    • 20.0 mm(6)
    • 23.82 mm(1)
    • 25.0 mm(8)
    • 25.4 mm(18)
    • 30.82 mm(2)
    • 31.75 mm(12)
    • 32.0 mm(8)
    • 38.1 mm(4)
    • 38.82 mm(4)
    • 46.96 mm(1)
    Shank Height Min-Shank Height Max
    Shank Width
    Shank Width
    • 0.375 in(4)
    • 0.394 in(3)
    • 0.472 in(3)
    • 0.5 in(6)
    • 0.625 in(5)
    • 0.63 in(4)
    • 0.75 in(10)
    • 0.787 in(5)
    • 0.79 in(1)
    • 0.8646 in(1)
    • 0.98 in(1)
    • 0.984 in(11)
    • 1.0 in(18)
    • 1.1402 in(2)
    • 1.25 in(12)
    • 1.26 in(4)
    • 1.4551 in(4)
    • 1.5 in(4)
    • 1.8488 in(1)
    Shank Width Min-Shank Width Max
    Shank Width
    Shank Width
    • 9.52 mm(2)
    • 9.525 mm(2)
    • 10.0 mm(3)
    • 12.0 mm(3)
    • 12.7 mm(6)
    • 15.875 mm(3)
    • 15.88 mm(2)
    • 16.0 mm(4)
    • 19.05 mm(10)
    • 20.0 mm(6)
    • 21.96 mm(1)
    • 25.0 mm(12)
    • 25.4 mm(18)
    • 28.96 mm(2)
    • 31.75 mm(12)
    • 32.0 mm(4)
    • 36.96 mm(4)
    • 38.1 mm(4)
    • 46.96 mm(1)
    Shank Width Min-Shank Width Max
    No filters matching ""
    Top Notch™ Kanal Açma
    Top Notch™ Uçlar
    (2106)

    Top Notch™ Uçlar

    Top Notch™ Kanal Açma Takım Tutucuları
    (128)

    Top Notch™ Kanal Açma Takım Tutucuları

    Top Notch™ Kanal Açma Delme Uçları
    (63)

    Top Notch™ Kanal Açma Delme Uçları

    Top Notch™ PCD Uçları
    (19)

    Top Notch™ PCD Uçları

    Top Notch™ Kanal Açma Delik Genişletme Başlıkları ve Kartuşları
    (8)

    Top Notch™ Kanal Açma Delik Genişletme Başlıkları ve Kartuşları

    Bize Sormak İstediğiniz Bir Şey Var Mı?

    Kalifiye personelimiz size yardımcı olmaya hazırdır.

    Satış ile İletişime Geçin

    Teknik sorularınız için lütfen Müşteri Destek merkezimiz aracılığıyla bize ulaşın

    öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
    Select the destination where you want to move -.
    Select the project where you want to add product(s) -.
    Yeni Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Lütfen geçerli bir ad girin
    Product(s) successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    ISO Katalog Numarası

    ANSI Katalog Numarası

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Pano bilgilerinizi görmek için oturum açmalısınız
    Session expired due to inactivity, please login again
    Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
    ürün(ler) sepete başarıyla eklendi
    Sepeti Görüntüle

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Katalog Numarası Kalite  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk