successfully added to cart
View Cart

Notifications

Mark all as read

O.D. ve I.D. Tornalama

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (7302)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7277)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7277)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (7277)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (7277)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (7277)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (7302)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (7302)
  • M Stainless Steel (5927)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (5927)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (5927)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (5927)
  • K Cast Iron (5741)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (5706)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (5678)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (5370)
  • N Non-Ferrous Materials (3404)
    • N1
      Wrought Aluminum
      (3097)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (3194)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1966)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (3385)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (3239)
    • N6
      Carbon, Graphite Composites, CFRP
      (2766)
    • N7
      MMC's
      (3125)
  • S High-Temp Alloys (6008)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (5795)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (5990)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (5808)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (5106)
  • H Hardened Materials (3388)
    • H1
      Hardened Materials 44-48 HRC
      (3388)
    • H2
      Hardened Materials 48-55 HRC
      (3361)
    • H3
      Hardened Materials 56-60 HRC
      (3361)
    • H4
      Hardened Materials >60 HRC
      (2493)
Select First Choice
  • BR (155)
  • CN (895)
  • DE (939)
  • GB (594)
  • IN (437)
  • SG (401)
  • US (1003)
Applications
Applications
  • Back Boring Back Boring (87)
  • Boring Boring (1)
  • CRT Profiling CRT Profiling (55)
  • Chamfer Turning Chamfer Turning (175)
  • Facing Facing (1539)
  • Grooving Grooving (2)
  • ID Facing ID Facing (200)
  • ID Grooving ID Grooving (11)
  • ID Thread Turning ID Thread Turning (209)
  • Multiple Direction Cutting Multiple Direction Cutting (2422)
  • OD Thread Turning OD Thread Turning (2)
  • Plunge Turning Plunge Turning (55)
  • Profiling Profiling (2050)
  • TRN Boring TRN Boring (1371)
  • Threading Threading (1)
  • Turning Turning (2031)
Type of Thread
Type of Thread
  • 55 (6)
  • 60 (17)
  • ACME (17)
  • API (13)
  • API BUTTRESS (2)
  • API RD (13)
  • BSPT (4)
  • BSW (14)
  • BUTTRESS (10)
  • M (14)
  • NPT (12)
  • NPTF (4)
  • RD DIN 405 (6)
  • STUB ACME (14)
  • TR DIN 103 (6)
  • UN (14)
  • UNJ (12)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (4399)
  • Interrupted (1589)
  • Lightly Interrupted Cut (5416)
  • Smooth Cut (7409)
  • Stable (4)
  • Unstable (4)
  • Varying Depth of Cut (5379)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (220)
  • 48.0 (8)
  • 49.783 (2)
  • 50.0 (24)
  • 60.0 (30)
  • 62.5 (40)
  • 63.0 (19)
  • 72.5 (25)
  • 75.0 (362)
  • 85.0 (14)
  • 90.0 (610)
  • 90.25 (10)
  • 91.0 (7)
  • 92.0 (4)
  • 93.0 (797)
  • 95.0 (1051)
  • 97.0 (8)
  • 97.5 (1)
  • 105.0 (1)
  • 107.5 (140)
  • 117.5 (14)
  • 140.0 (4)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (206)
  • Boring Bar Shank (850)
  • KM (496)
  • PSC (8)
  • Toolholder (1381)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (5)
  • 1.0 (2380)
  • 2.0 (3494)
  • 3.0 (1256)
  • 4.0 (3625)
  • 6.0 (1095)
  • 8.0 (2174)
  • 16.0 (2)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (83)
  • 0.001 in (93)
  • 0.0011 in (59)
  • 0.0015 in (439)
  • 0.002 in (119)
  • 0.0026 in (8)
  • 0.003 in (14)
  • 0.0031 in (8)
  • 0.0037 in (8)
  • 0.0038 in (9)
  • 0.004 in (1979)
  • 0.0046 in (8)
  • 0.005 in (9)
  • 0.0052 in (8)
  • 0.0053 in (8)
  • 0.0059 in (8)
  • 0.006 in (12)
  • 0.0062 in (8)
  • 0.0065 in (10)
  • 0.0068 in (8)
  • 0.007 in (144)
  • 0.0075 in (10)
  • 0.0078 in (23)
  • 0.0079 in (58)
  • 0.008 in (2279)
  • 0.0083 in (365)
  • 0.0088 in (8)
  • 0.0093 in (8)
  • 0.0099 in (8)
  • 0.01 in (10)
  • 0.0106 in (8)
  • 0.0111 in (8)
  • 0.0112 in (8)
  • 0.0118 in (40)
  • 0.012 in (23)
  • 0.0124 in (8)
  • 0.0125 in (10)
  • 0.013 in (170)
  • 0.0135 in (10)
  • 0.014 in (8)
  • 0.015 in (127)
  • 0.0155 in (32)
  • 0.0156 in (4043)
  • 0.0157 in (15)
  • 0.0158 in (17)
  • 0.0159 in (8)
  • 0.016 in (1544)
  • 0.017 in (10)
  • 0.0175 in (10)
  • 0.0193 in (8)
  • 0.0197 in (69)
  • 0.02 in (20)
  • 0.0225 in (10)
  • 0.031 in (1813)
  • 0.0311 in (72)
  • 0.0312 in (2159)
  • 0.0313 in (5025)
  • 0.0315 in (163)
  • 0.032 in (18)
  • 0.0355 in (10)
  • 0.0394 in (23)
  • 0.0468 in (180)
  • 0.0469 in (3496)
  • 0.047 in (1692)
  • 0.0472 in (119)
  • 0.0487 in (12)
  • 0.0492 in (8)
  • 0.0516 in (52)
  • 0.0591 in (8)
  • 0.0623 in (127)
  • 0.0625 in (2199)
  • 0.063 in (1395)
  • 0.0689 in (8)
  • 0.078 in (8)
  • 0.0781 in (10)
  • 0.0787 in (17)
  • 0.0886 in (10)
  • 0.0928 in (7)
  • 0.0938 in (995)
  • 0.094 in (374)
  • 0.0945 in (52)
  • 0.1181 in (22)
  • 0.125 in (220)
  • 0.126 in (191)
  • 0.1563 in (382)
  • 0.1575 in (98)
  • 0.1875 in (103)
  • 0.1969 in (97)
  • 0.197 in (10)
  • 0.236 in (80)
  • 0.2362 in (57)
  • 0.25 in (208)
  • 0.312 in (163)
  • 0.3125 in (28)
  • 0.315 in (18)
  • 0.375 in (43)
  • 0.3935 in (6)
  • 0.3937 in (15)
  • 0.4922 in (10)
  • 0.5 in (27)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (83)
  • 0.03 mm (156)
  • 0.038 mm (439)
  • 0.05 mm (110)
  • 0.051 mm (91)
  • 0.066 mm (8)
  • 0.076 mm (14)
  • 0.08 mm (12)
  • 0.094 mm (8)
  • 0.097 mm (9)
  • 0.1 mm (1802)
  • 0.102 mm (779)
  • 0.127 mm (9)
  • 0.131 mm (8)
  • 0.132 mm (8)
  • 0.133 mm (8)
  • 0.15 mm (8)
  • 0.152 mm (12)
  • 0.157 mm (8)
  • 0.165 mm (10)
  • 0.173 mm (8)
  • 0.177 mm (24)
  • 0.178 mm (95)
  • 0.18 mm (127)
  • 0.19 mm (10)
  • 0.191 mm (10)
  • 0.198 mm (8)
  • 0.2 mm (2232)
  • 0.202 mm (8)
  • 0.203 mm (1257)
  • 0.224 mm (8)
  • 0.235 mm (8)
  • 0.25 mm (8)
  • 0.251 mm (8)
  • 0.254 mm (10)
  • 0.269 mm (8)
  • 0.282 mm (8)
  • 0.284 mm (8)
  • 0.3 mm (61)
  • 0.315 mm (9)
  • 0.318 mm (10)
  • 0.33 mm (8)
  • 0.34 mm (170)
  • 0.356 mm (8)
  • 0.38 mm (118)
  • 0.381 mm (90)
  • 0.394 mm (32)
  • 0.397 mm (2279)
  • 0.4 mm (3937)
  • 0.404 mm (8)
  • 0.406 mm (122)
  • 0.43 mm (8)
  • 0.445 mm (10)
  • 0.49 mm (8)
  • 0.5 mm (71)
  • 0.508 mm (8)
  • 0.572 mm (10)
  • 0.6 mm (122)
  • 0.703 mm (24)
  • 0.787 mm (30)
  • 0.79 mm (160)
  • 0.791 mm (72)
  • 0.792 mm (521)
  • 0.794 mm (2262)
  • 0.795 mm (24)
  • 0.8 mm (4986)
  • 0.902 mm (10)
  • 1.0 mm (27)
  • 1.188 mm (180)
  • 1.19 mm (396)
  • 1.191 mm (1917)
  • 1.194 mm (17)
  • 1.2 mm (3362)
  • 1.25 mm (8)
  • 1.5 mm (8)
  • 1.587 mm (360)
  • 1.588 mm (1285)
  • 1.6 mm (2200)
  • 2.0 mm (20)
  • 2.25 mm (10)
  • 2.38 mm (130)
  • 2.381 mm (212)
  • 2.388 mm (10)
  • 2.4 mm (885)
  • 3.0 mm (22)
  • 3.175 mm (67)
  • 3.18 mm (88)
  • 3.2 mm (339)
  • 4.0 mm (101)
  • 4.76 mm (13)
  • 4.7625 mm (103)
  • 5.0 mm (97)
  • 6.0 mm (110)
  • 6.35 mm (208)
  • 7.9375 mm (20)
  • 8.0 mm (18)
  • 9.525 mm (43)
  • 10.0 mm (17)
  • 12.5 mm (10)
  • 12.7 mm (27)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (6171)
  • 0.66 mm (1)
  • 0.69 mm (1)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (6171)
  • 0.026 in (1)
  • 0.027 in (1)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (1256)
  • Interrupted (8)
  • Lightly Interrupted Cut (2134)
  • Smooth Cut (4096)
  • Varying Depth of Cut (2114)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (1487)
  • CM2 (1426)
  • K090 (1806)
  • K10M (2041)
  • K10P (1822)
  • K10U (1789)
  • K15U (1755)
  • K20K (2012)
  • K25M (1769)
  • K25P (1739)
  • K313 (3080)
  • K420 (1586)
  • K68 (2760)
  • KB1610 (1662)
  • KB5610 (1398)
  • KB5625 (1485)
  • KB9610 (1857)
  • KBH10 (1684)
  • KBH20 (1818)
  • KC5010 (3586)
  • KC5025 (3040)
  • KC5410 (2554)
  • KC5510 (1786)
  • KC720 (2313)
  • KC730 (3099)
  • KC7310 (2028)
  • KC732 (2260)
  • KC8050 (2961)
  • KC810 (2841)
  • KC850 (3199)
  • KC9010 (2434)
  • KC9025 (2923)
  • KC910 (2779)
  • KC9105 (2503)
  • KC9110 (2963)
  • KC9120 (2557)
  • KC9125 (2850)
  • KC9140 (1910)
  • KC9145 (1608)
  • KC9215 (1808)
  • KC9225 (2696)
  • KC9240 (2757)
  • KC9240NEW (2739)
  • KC9245 (1803)
  • KC9315 (2906)
  • KC9320 (2656)
  • KC9325 (2417)
  • KC935 (3005)
  • KC950 (2593)
  • KC990 (2703)
  • KCK05 (2754)
  • KCK05B (2111)
  • KCK15 (2606)
  • KCK15B (2766)
  • KCK20 (2893)
  • KCK20B (2825)
  • KCM15 (2723)
  • KCM15B (2381)
  • KCM25 (2886)
  • KCM25B (2720)
  • KCM35 (2297)
  • KCM35B (1544)
  • KCP05 (2495)
  • KCP05B (1493)
  • KCP10 (3097)
  • KCP10B (3129)
  • KCP25 (3276)
  • KCP25B (3313)
  • KCP30 (2808)
  • KCP30B (1761)
  • KCP40 (1668)
  • KCP40B (1786)
  • KCPK05 (1808)
  • KCS10 (1427)
  • KCS10B (2601)
  • KCU10 (3473)
  • KCU25 (3035)
  • KD050 (1529)
  • KD081 (1410)
  • KD120 (1367)
  • KD1400 (1778)
  • KD1425 (1881)
  • KT125 (1533)
  • KT175 (2037)
  • KT315 (2622)
  • KU10T (2268)
  • KU30T (2637)
  • KY1320 (1667)
  • KY1615 (1852)
  • KY3000 (1698)
  • KY3400 (1487)
  • KY3500 (1922)
  • KY4400 (1786)
  • KYHK15B (1947)
  • KYK25 (1432)
  • KYK35 (1786)
  • NL250 (1752)
  • NL920 (1555)
  • SP3019 (1454)
  • SP4019 (1417)
Hand Of Tool
Hand Of Tool
  • L (1161)
  • N (209)
  • R (1572)
Wiper Insert
Wiper Insert
  • N (9041)
  • Y (2070)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 4.57 mm (8)
  • 5.18 mm (8)
  • 5.28 mm (5)
  • 5.54 mm (3)
  • 5.69 mm (4)
  • 5.78 mm (3)
  • 5.79 mm (5)
  • 5.84 mm (1)
  • 5.94 mm (9)
  • 6.0 mm (1)
  • 6.78 mm (3)
  • 6.98 mm (3)
  • 7.09 mm (5)
  • 7.1 mm (3)
  • 7.24 mm (14)
  • 7.42 mm (4)
  • 7.52 mm (5)
  • 7.62 mm (2)
  • 8.15 mm (2)
  • 8.81 mm (3)
  • 9.04 mm (5)
  • 9.09 mm (5)
  • 9.14 mm (3)
  • 10.54 mm (4)
  • 10.541 mm (8)
  • 11.0 mm (14)
  • 12.19 mm (15)
  • 12.192 mm (15)
  • 12.9 mm (2)
  • 13.0 mm (31)
  • 15.24 mm (43)
  • 16.0 mm (48)
  • 18.54 mm (2)
  • 18.542 mm (8)
  • 19.558 mm (22)
  • 19.56 mm (20)
  • 20.0 mm (58)
  • 21.59 mm (10)
  • 23.62 mm (19)
  • 23.622 mm (22)
  • 24.892 mm (15)
  • 25.0 mm (70)
  • 25.4 mm (2)
  • 27.0 mm (2)
  • 30.226 mm (2)
  • 30.48 mm (43)
  • 30.988 mm (2)
  • 30.99 mm (8)
  • 32.0 mm (131)
  • 32.664 mm (2)
  • 33.0 mm (2)
  • 33.02 mm (22)
  • 37.0 mm (3)
  • 37.338 mm (11)
  • 37.34 mm (11)
  • 37.388 mm (3)
  • 39.37 mm (3)
  • 40.0 mm (139)
  • 41.275 mm (2)
  • 43.307 mm (19)
  • 43.31 mm (7)
  • 44.0 mm (12)
  • 44.7 mm (9)
  • 44.704 mm (28)
  • 45.0 mm (2)
  • 47.625 mm (2)
  • 50.0 mm (167)
  • 50.8 mm (32)
  • 51.05 mm (2)
  • 51.054 mm (11)
  • 52.0 mm (2)
  • 53.975 mm (3)
  • 54.0 mm (30)
  • 55.0 mm (6)
  • 57.15 mm (6)
  • 59.0 mm (2)
  • 60.0 mm (16)
  • 60.96 mm (34)
  • 63.0 mm (80)
  • 63.5 mm (14)
  • 65.8368 mm (2)
  • 65.837 mm (2)
  • 67.31 mm (2)
  • 70.0 mm (53)
  • 74.0 mm (4)
  • 76.96 mm (5)
  • 76.962 mm (21)
  • 80.0 mm (51)
  • 82.55 mm (10)
  • 86.0 mm (68)
  • 90.0 mm (6)
  • 94.0 mm (2)
  • 100.0 mm (41)
  • 104.0 mm (2)
  • 106.0 mm (31)
  • 118.0 mm (2)
  • 120.0 mm (2)
  • 130.0 mm (2)
  • 850.0 mm (6)
  • 2000.0 mm (6)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.18 in (8)
  • 0.204 in (8)
  • 0.208 in (5)
  • 0.218 in (3)
  • 0.224 in (4)
  • 0.228 in (8)
  • 0.234 in (9)
  • 0.26 in (2)
  • 0.267 in (3)
  • 0.275 in (3)
  • 0.279 in (5)
  • 0.28 in (3)
  • 0.285 in (14)
  • 0.292 in (4)
  • 0.296 in (6)
  • 0.3 in (2)
  • 0.321 in (3)
  • 0.347 in (3)
  • 0.356 in (6)
  • 0.358 in (5)
  • 0.36 in (3)
  • 0.415 in (12)
  • 0.433 in (8)
  • 0.4331 in (6)
  • 0.4799 in (3)
  • 0.48 in (27)
  • 0.508 in (2)
  • 0.5118 in (22)
  • 0.512 in (9)
  • 0.6 in (43)
  • 0.6299 in (39)
  • 0.63 in (9)
  • 0.73 in (9)
  • 0.77 in (38)
  • 0.7701 in (5)
  • 0.787 in (8)
  • 0.7874 in (50)
  • 0.85 in (10)
  • 0.9299 in (4)
  • 0.93 in (37)
  • 0.98 in (16)
  • 0.984 in (15)
  • 0.9843 in (55)
  • 1.0 in (2)
  • 1.063 in (2)
  • 1.19 in (3)
  • 1.2 in (43)
  • 1.22 in (10)
  • 1.2598 in (95)
  • 1.26 in (36)
  • 1.286 in (2)
  • 1.2993 in (2)
  • 1.3 in (22)
  • 1.457 in (3)
  • 1.47 in (22)
  • 1.472 in (3)
  • 1.55 in (3)
  • 1.5748 in (97)
  • 1.575 in (42)
  • 1.625 in (2)
  • 1.705 in (26)
  • 1.732 in (11)
  • 1.76 in (37)
  • 1.772 in (2)
  • 1.875 in (2)
  • 1.9685 in (102)
  • 1.969 in (64)
  • 2.0 in (32)
  • 2.01 in (13)
  • 2.047 in (2)
  • 2.125 in (3)
  • 2.126 in (30)
  • 2.165 in (2)
  • 2.1654 in (4)
  • 2.25 in (6)
  • 2.323 in (2)
  • 2.362 in (2)
  • 2.3622 in (14)
  • 2.4 in (34)
  • 2.48 in (24)
  • 2.4803 in (57)
  • 2.5 in (14)
  • 2.592 in (4)
  • 2.65 in (2)
  • 2.7559 in (15)
  • 2.756 in (38)
  • 2.913 in (4)
  • 3.03 in (26)
  • 3.15 in (51)
  • 3.25 in (10)
  • 3.386 in (68)
  • 3.543 in (6)
  • 3.701 in (2)
  • 3.937 in (41)
  • 4.094 in (2)
  • 4.173 in (31)
  • 4.724 in (2)
  • 5.118 in (2)
  • 33.4646 in (6)
  • 78.7402 in (6)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (10)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (10)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max