Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

Kennametal Hizmetinizde

Ürüne Özel Bir Sorunuz mu Var?

Uzmanlık Alanına göre Global Hizmet Profesyonellerinin tam listesine bakın

Hızlı Sipariş
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle

Profil işleme

Filtreleri Seçin
Filters
Filtreler
Filtreleri şurada görüntüle
Metrik
İnç
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1564)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (1564)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (1564)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (1564)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (1564)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (1564)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (1564)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (1564)
  • M Stainless Steel (1474)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (1474)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (1474)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (1474)
  • K Cast Iron (1470)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (1470)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (1466)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (1461)
  • N Non-Ferrous Materials (1494)
    • N1
      Wrought Aluminum (1480)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (1394)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (483)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (1494)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1408)
    • N6
      Carbon, Graphite Composites, CFRP (1394)
    • N7
      MMC's (382)
  • S High-Temp Alloys (1555)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (1555)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (1555)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (1555)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (1549)
  • H Hardened Materials (1184)
    • H1
      Hardened Materials 44-48 HRC (1184)
    • H2
      Hardened Materials 48-55 HRC (1068)
    • H3
      Hardened Materials 56-60 HRC (354)
    • H4
      Hardened Materials >60 HRC (354)
First Choicei Seçin
  • BR (23)
  • CN (190)
  • DE (190)
  • GB (108)
  • IN (33)
  • SG (67)
  • US (278)
Applications
Applications
  • Back Boring Back Boring (127)
  • Boring Boring (225)
  • CRT Profiling CRT Profiling (20)
  • Chamfer Turning Chamfer Turning (52)
  • Cut-Off Cut-Off (291)
  • Deep Grooving Deep Grooving (106)
  • Face Grooving Face Grooving (943)
  • Facing Facing (187)
  • Grooving Grooving (1154)
  • ID Facing ID Facing (140)
  • ID Grooving ID Grooving (619)
  • ID Thread Turning ID Thread Turning (69)
  • Multiple Direction Cutting Multiple Direction Cutting (552)
  • OD Thread Turning OD Thread Turning (127)
  • Plunge Turning Plunge Turning (530)
  • Profiling Profiling (455)
  • TRN Boring TRN Boring (50)
  • Threading Threading (130)
  • Turning Turning (357)
Type of Thread
Type of Thread
  • 60 (187)
  • ACME (122)
  • API (114)
  • API RD (86)
  • BSW (78)
  • BUTTRESS (182)
  • M (114)
  • NPT (78)
  • STUB ACME (78)
  • UN (182)
  • UNJ (78)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (1054)
  • Lightly Interrupted Cut (1166)
  • Smooth Cut (1284)
  • Varying Depth of Cut (1245)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (12)
  • 60.0 (4)
  • 62.5 (2)
  • 72.5 (2)
  • 90.0 (801)
  • 92.25 (27)
  • 93.0 (1)
  • 95.0 (77)
  • 100.0 (1)
  • 107.5 (9)
  • 117.5 (8)
Tool Cutting Edge Angle Min - Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Bolt-On Head (8)
  • Boring Bar Shank (212)
  • Toolholder (469)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (789)
  • 2.0 (1174)
Cutting Edges Per Insert Min - Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 0.75 in (2)
  • 1.625 in (6)
  • 1.881 in (10)
  • 1.954 in (4)
  • 2.037 in (8)
  • 2.077 in (31)
  • 2.138 in (5)
  • 2.156 in (46)
  • 2.165 in (1)
  • 2.192 in (1)
  • 2.269 in (20)
  • 2.274 in (2)
  • 2.352 in (14)
  • 2.431 in (6)
  • 2.5 in (4)
  • 2.584 in (2)
  • 2.638 in (6)
  • 2.668 in (2)
  • 2.757 in (2)
  • 2.888 in (3)
  • 3.15 in (3)
  • 3.338 in (2)
  • 3.5 in (6)
  • 3.638 in (2)
  • 3.938 in (6)
  • 4.0 in (5)
  • 4.5 in (67)
  • 4.921 in (104)
  • 4.933 in (12)
  • 5.0 in (40)
  • 5.327 in (2)
  • 5.348 in (2)
  • 5.372 in (4)
  • 5.394 in (4)
  • 5.463 in (4)
  • 5.508 in (12)
  • 5.906 in (116)
  • 5.915 in (4)
  • 5.917 in (4)
  • 5.961 in (10)
  • 6.0 in (178)
  • 6.114 in (2)
  • 6.136 in (2)
  • 6.25 in (4)
  • 6.372 in (2)
  • 6.394 in (2)
  • 6.694 in (46)
  • 6.703 in (4)
  • 7.0 in (23)
  • 7.079 in (2)
  • 7.087 in (14)
  • 7.263 in (2)
  • 7.875 in (36)
  • 7.931 in (7)
  • 7.976 in (1)
  • 8.0 in (7)
  • 8.012 in (4)
  • 8.019 in (6)
  • 8.02 in (4)
  • 8.055 in (1)
  • 8.132 in (2)
  • 8.15 in (1)
  • 9.843 in (20)
  • 9.879 in (1)
  • 10.0 in (15)
  • 10.02 in (3)
  • 10.025 in (1)
  • 10.063 in (2)
  • 10.095 in (2)
  • 11.811 in (12)
  • 12.0 in (14)
  • 12.02 in (3)
  • 12.025 in (2)
  • 13.781 in (2)
  • 14.0 in (12)
  • 14.07 in (1)
  • 16.0 in (10)
Over All Length [L] Min - Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 19.05 mm (2)
  • 41.276 mm (6)
  • 47.75 mm (10)
  • 49.625 mm (4)
  • 51.75 mm (8)
  • 52.75 mm (31)
  • 54.301 mm (5)
  • 54.75 mm (46)
  • 55.0 mm (1)
  • 55.676 mm (1)
  • 57.625 mm (20)
  • 57.75 mm (2)
  • 59.75 mm (14)
  • 61.75 mm (6)
  • 63.5 mm (4)
  • 65.625 mm (2)
  • 67.0 mm (6)
  • 67.75 mm (2)
  • 70.0 mm (2)
  • 73.351 mm (3)
  • 80.0 mm (3)
  • 84.775 mm (2)
  • 88.9 mm (6)
  • 92.4 mm (2)
  • 100.0 mm (6)
  • 101.601 mm (5)
  • 114.301 mm (67)
  • 125.0 mm (104)
  • 125.301 mm (12)
  • 127.0 mm (40)
  • 135.3 mm (2)
  • 135.85 mm (2)
  • 136.451 mm (4)
  • 137.0 mm (4)
  • 138.75 mm (4)
  • 139.9 mm (12)
  • 150.0 mm (116)
  • 150.25 mm (4)
  • 150.3 mm (4)
  • 151.4 mm (10)
  • 152.4 mm (178)
  • 155.3 mm (2)
  • 155.851 mm (2)
  • 158.75 mm (4)
  • 161.851 mm (2)
  • 162.4 mm (2)
  • 170.0 mm (46)
  • 170.25 mm (4)
  • 177.8 mm (23)
  • 179.8 mm (2)
  • 180.0 mm (14)
  • 184.451 mm (2)
  • 200.0 mm (36)
  • 201.451 mm (7)
  • 202.601 mm (1)
  • 203.201 mm (7)
  • 203.5 mm (4)
  • 203.675 mm (6)
  • 203.701 mm (4)
  • 204.601 mm (1)
  • 206.55 mm (2)
  • 207.0 mm (1)
  • 250.0 mm (20)
  • 250.925 mm (1)
  • 254.0 mm (15)
  • 254.5 mm (3)
  • 254.601 mm (1)
  • 255.601 mm (2)
  • 256.401 mm (2)
  • 300.0 mm (12)
  • 304.8 mm (14)
  • 305.3 mm (3)
  • 305.401 mm (2)
  • 350.0 mm (2)
  • 355.6 mm (12)
  • 357.375 mm (1)
  • 406.401 mm (10)
Over All Length [L] Min - Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (78)
  • 0.003 in (187)
  • 0.004 in (146)
  • 0.005 in (154)
  • 0.006 in (114)
  • 0.007 in (150)
  • 0.008 in (675)
  • 0.01 in (150)
  • 0.011 in (78)
  • 0.012 in (142)
  • 0.014 in (117)
  • 0.016 in (717)
  • 0.017 in (78)
  • 0.019 in (114)
  • 0.02 in (233)
  • 0.023 in (117)
  • 0.03 in (70)
  • 0.031 in (700)
  • 0.033 in (11)
  • 0.034 in (61)
  • 0.035 in (114)
  • 0.039 in (350)
  • 0.041 in (118)
  • 0.046 in (18)
  • 0.047 in (390)
  • 0.048 in (18)
  • 0.049 in (147)
  • 0.06 in (299)
  • 0.061 in (47)
  • 0.062 in (92)
  • 0.063 in (412)
  • 0.065 in (45)
  • 0.069 in (147)
  • 0.078 in (93)
  • 0.079 in (229)
  • 0.08 in (68)
  • 0.081 in (49)
  • 0.089 in (114)
  • 0.094 in (134)
  • 0.095 in (159)
  • 0.096 in (48)
  • 0.098 in (133)
  • 0.099 in (57)
  • 0.1 in (41)
  • 0.119 in (94)
  • 0.12 in (98)
  • 0.125 in (195)
  • 0.128 in (37)
  • 0.156 in (44)
  • 0.157 in (44)
  • 0.158 in (48)
  • 0.159 in (27)
  • 0.187 in (8)
  • 0.188 in (33)
  • 0.197 in (10)
  • 0.198 in (12)
  • 0.25 in (13)
Corner Radius Min - Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (78)
  • 0.076 mm (187)
  • 0.1 mm (146)
  • 0.125 mm (154)
  • 0.151 mm (114)
  • 0.176 mm (150)
  • 0.2 mm (675)
  • 0.225 mm (78)
  • 0.25 mm (150)
  • 0.275 mm (78)
  • 0.301 mm (142)
  • 0.325 mm (117)
  • 0.351 mm (114)
  • 0.4 mm (717)
  • 0.426 mm (78)
  • 0.45 mm (114)
  • 0.476 mm (40)
  • 0.5 mm (233)
  • 0.576 mm (117)
  • 0.75 mm (70)
  • 0.775 mm (209)
  • 0.8 mm (491)
  • 0.826 mm (11)
  • 0.851 mm (61)
  • 0.9 mm (114)
  • 1.0 mm (350)
  • 1.05 mm (118)
  • 1.175 mm (18)
  • 1.201 mm (390)
  • 1.225 mm (18)
  • 1.25 mm (147)
  • 1.5 mm (291)
  • 1.526 mm (84)
  • 1.55 mm (47)
  • 1.576 mm (92)
  • 1.6 mm (412)
  • 1.651 mm (45)
  • 1.75 mm (147)
  • 1.975 mm (93)
  • 2.0 mm (229)
  • 2.025 mm (68)
  • 2.051 mm (49)
  • 2.25 mm (114)
  • 2.375 mm (134)
  • 2.401 mm (159)
  • 2.45 mm (48)
  • 2.5 mm (133)
  • 2.526 mm (57)
  • 2.551 mm (41)
  • 3.0 mm (94)
  • 3.026 mm (57)
  • 3.051 mm (41)
  • 3.176 mm (195)
  • 3.25 mm (37)
  • 3.95 mm (25)
  • 3.975 mm (19)
  • 4.0 mm (44)
  • 4.025 mm (48)
  • 4.05 mm (27)
  • 4.75 mm (8)
  • 4.775 mm (33)
  • 5.0 mm (10)
  • 5.025 mm (12)
  • 6.351 mm (13)
Corner Radius Min - Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (1012)
Corner Chamfer Min - Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (1012)
Corner Chamfer Min - Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K00326 (29)
  • K1 (5)
  • K1025 (129)
  • K2885 (146)
  • K313 (917)
  • K420 (262)
  • K4H (110)
  • K6 (4)
  • K68 (341)
  • K8735 (29)
  • KB1345 (139)
  • KB1630 (354)
  • KB5625 (314)
  • KBH20 (276)
  • KC250 (233)
  • KC5010 (768)
  • KC5025 (720)
  • KC5410 (328)
  • KC5510 (20)
  • KC710 (182)
  • KC720 (216)
  • KC722 (182)
  • KC730 (414)
  • KC7310 (139)
  • KC732 (224)
  • KC8050 (152)
  • KC810 (298)
  • KC850 (353)
  • KC9025 (94)
  • KC910 (251)
  • KC9105 (62)
  • KC9110 (613)
  • KC9120 (112)
  • KC9125 (418)
  • KC9225 (152)
  • KC9315 (89)
  • KC9320 (182)
  • KC935 (328)
  • KC950 (276)
  • KCD25 (29)
  • KCK05 (37)
  • KCK15B (31)
  • KCK20 (410)
  • KCK20B (425)
  • KCM15B (59)
  • KCM25 (100)
  • KCM25B (5)
  • KCM35B (162)
  • KCP05 (93)
  • KCP10 (429)
  • KCP10B (497)
  • KCP25 (430)
  • KCP25B (547)
  • KCP25C (100)
  • KCS10 (56)
  • KCS10B (89)