Hoş Geldiniz
Lütfen tercihlerinizi onaylayın
Tercihleri Güncelle

Ürün Önerileri

Product Family suggestions

Kennametal Hizmetinizde

Müşteri Destek

Bütün dünyadaki müşteri destek iletişim detaylarını bulun.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Ürün(ler) sepete başarıyla eklendi
Sepeti Görüntüle
Ürün(ler) are being added to the cart
Sepeti Görüntüle
Çok geç olmadan bu özel tekliflerden faydalanın! Şimdi Satın Alın

Tek taraflı kanal açma, tornalama ve kesme sistemi

Beyond Evolution, yüksek veya düşük basınçlı soğutucu tedariki ile uygulanabilir; aktif soğutucu kontrol özelliği daha uzun takım ömrü ve daha yüksek metal kaldırma oranları (MRR) sunar. Üç temas yüzeyine sahip tescilli Üçlü V oturma özelliği, işlevsel stabilite sağlar ve titreşimi en aza indirerek mükemmel yüzey kaliteleri sağlar.

  • CF ve CL kesme uçları artırılmış ısı ve sürtünme direnci ile daha yüksek hızlarda tornalama, şimdi ısıl dirençli alaşımlar için KCS10B tornalama kalitesinde mevcuttur.
  • KENGold PVD kaplama teknolojisi ile KCU25B genel tornalama kalitesi ile her kesimde hassasiyet ve gücü deneyimleyin

Talaş Kırma Etkisi

  • Tüm kanal açma, kesme-dilimleme ve çok yönlü tornalama uygulamalarında talaş kontrolünü iyileştirme olanağı.

Üçlü V Tasarımı

  • Üst ve Alt taban V - Daha yüksek sürdürülebilir sağlamlık ve boyutsal doğruluk için hassas ve güvenilirlikli kesici uç konumlandırma
  • V Sırt Tasarımı - Benzersiz kanal açma, kesme-dilimleme ve çok yönlü tornalama yükü taşıma kararlılığı

Fan Etkisi

  • Soğutma sıvısını kesici ucun üst kısmından talaşın altındaki kesme bölgesine hassas şekilde yönlendirir ve ısıyı kontrol altına alır.

Önerilen Takımlama Kombinasyonları

Aşağıdaki takımlama kombinasyonları, uygulamaları için en yaygın olarak kullanılanlardır.

Filtreleri Seçin
Filtreler
Filtreler
    Filtreleri şurada görüntüle
    Metrik
    İnç
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (432)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(432)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(432)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(432)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(432)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(432)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(432)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(432)
    • M Stainless Steel (384)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(384)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(384)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(384)
    • K Cast Iron (432)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(432)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(432)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(432)
    • N Non-Ferrous Materials (378)
      • N1
        Wrought Aluminum (378)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(369)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (378)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (369)
      • N6
        Carbon, Graphite Composites, CFRP (369)
    • S High-Temp Alloys (378)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(378)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(378)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(378)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(378)
    • H Hardened Materials (310)
      • H1
        Hardened Materials 44-48 HRC(310)
      • H2
        Hardened Materials 48-55 HRC(310)
    First Choicei Seçin
    • BR (8)
    • CN (69)
    • DE (69)
    • GB (40)
    • IN (3)
    • SG (26)
    • US (102)
    Applications
    Applications
    • Back BoringBack Boring (162)
    • BoringBoring (162)
    • CRT ProfilingCRT Profiling (2)
    • Cut-OffCut-Off (190)
    • Deep GroovingDeep Grooving (2)
    • Face GroovingFace Grooving (162)
    • FacingFacing (162)
    • GroovingGrooving (424)
    • ID FacingID Facing (162)
    • ID GroovingID Grooving (230)
    • Multiple Direction CuttingMultiple Direction Cutting (56)
    • Plunge TurningPlunge Turning (206)
    • ProfilingProfiling (179)
    • TurningTurning (202)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (324)
    • Lightly Interrupted Cut (404)
    • Smooth Cut (441)
    • Varying Depth of Cut (408)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (242)
    Tool Cutting Edge Angle Min-Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Boring Bar Shank (52)
    • Toolholder (148)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (399)
    Cutting Edges Per Insert Min-Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.88 in(10)
    • 1.954 in(4)
    • 2.037 in(8)
    • 2.273 in(4)
    • 2.347 in(4)
    • 2.4309 in(2)
    • 2.431 in(4)
    • 2.583 in(2)
    • 2.667 in(4)
    • 4.5 in(24)
    • 4.921 in(32)
    • 5.3267 in(2)
    • 5.3486 in(2)
    • 5.372 in(4)
    • 5.3939 in(4)
    • 5.463 in(2)
    • 5.508 in(6)
    • 5.906 in(42)
    • 5.915 in(2)
    • 5.961 in(6)
    • 6.0 in(52)
    • 6.1141 in(2)
    • 6.136 in(2)
    • 6.25 in(2)
    • 6.3721 in(2)
    • 6.3939 in(2)
    • 6.693 in(22)
    • 6.703 in(2)
    • 7.0 in(10)
    • 7.087 in(12)
    • 7.874 in(18)
    • 9.843 in(8)
    Over All Length [L] Min-Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 47.75 mm(10)
    • 49.62 mm(4)
    • 51.75 mm(8)
    • 57.75 mm(4)
    • 59.62 mm(4)
    • 61.746 mm(2)
    • 61.75 mm(4)
    • 65.62 mm(2)
    • 67.75 mm(4)
    • 114.3 mm(24)
    • 125.0 mm(32)
    • 135.299 mm(2)
    • 135.855 mm(2)
    • 136.449 mm(4)
    • 137.004 mm(4)
    • 138.75 mm(2)
    • 139.9 mm(6)
    • 150.0 mm(42)
    • 150.25 mm(2)
    • 151.4 mm(6)
    • 152.4 mm(52)
    • 155.299 mm(2)
    • 155.855 mm(2)
    • 158.75 mm(2)
    • 161.852 mm(2)
    • 162.404 mm(2)
    • 170.0 mm(22)
    • 170.25 mm(2)
    • 177.8 mm(10)
    • 180.0 mm(12)
    • 200.0 mm(18)
    • 250.0 mm(8)
    Over All Length [L] Min-Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(40)
    • 0.008 in(150)
    • 0.012 in(66)
    • 0.016 in(168)
    • 0.031 in(130)
    • 0.039 in(56)
    • 0.041 in(63)
    • 0.046 in(20)
    • 0.047 in(87)
    • 0.059 in(45)
    • 0.061 in(40)
    • 0.062 in(53)
    • 0.063 in(50)
    • 0.065 in(51)
    • 0.079 in(47)
    • 0.082 in(55)
    • 0.094 in(52)
    • 0.096 in(54)
    • 0.098 in(37)
    • 0.1 in(33)
    • 0.101 in(44)
    • 0.118 in(39)
    • 0.12 in(35)
    • 0.121 in(46)
    • 0.125 in(46)
    • 0.128 in(42)
    • 0.156 in(31)
    • 0.157 in(25)
    • 0.158 in(29)
    • 0.16 in(33)
    Corner Radius Min-Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(40)
    • 0.2 mm(150)
    • 0.3 mm(66)
    • 0.4 mm(168)
    • 0.8 mm(130)
    • 1.0 mm(56)
    • 1.05 mm(63)
    • 1.175 mm(20)
    • 1.2 mm(87)
    • 1.5 mm(45)
    • 1.55 mm(40)
    • 1.575 mm(53)
    • 1.6 mm(50)
    • 1.65 mm(51)
    • 2.0 mm(47)
    • 2.075 mm(55)
    • 2.375 mm(52)
    • 2.45 mm(54)
    • 2.5 mm(37)
    • 2.55 mm(33)
    • 2.575 mm(44)
    • 3.0 mm(39)
    • 3.05 mm(35)
    • 3.075 mm(46)
    • 3.175 mm(46)
    • 3.25 mm(42)
    • 3.95 mm(31)
    • 4.0 mm(25)
    • 4.025 mm(29)
    • 4.075 mm(33)
    Corner Radius Min-Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(241)
    Corner Chamfer Min-Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(241)
    Corner Chamfer Min-Corner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (251)
    • KCK20B (251)
    • KCM35B (166)
    • KCP10B (259)
    • KCP25B (264)
    • KCP25C (242)
    • KCS10B (166)
    • KCU10 (276)
    • KCU10B (276)
    • KCU25 (279)
    • KCU25B (279)
    Hand Of Tool
    Hand Of Tool
    • L (100)
    • R (100)
    Wiper Insert
    Wiper Insert
    • N (399)
    F Dimension
    F Dimension
    • 8.52 mm(4)
    • 9.0 mm(4)
    • 11.0 mm(5)
    • 11.06 mm(7)
    • 13.0 mm(6)
    • 13.94 mm(2)
    • 13.97 mm(4)
    • 17.0 mm(4)
    • 17.3 mm(6)
    • 17.5 mm(2)
    • 19.08 mm(8)
    • 19.13 mm(12)
    • 19.23 mm(4)
    • 20.06 mm(8)
    • 20.11 mm(12)
    • 20.21 mm(4)
    • 21.13 mm(4)
    • 22.0 mm(4)
    • 25.06 mm(8)
    • 25.11 mm(12)
    • 25.21 mm(4)
    • 25.34 mm(2)
    • 25.43 mm(8)
    • 25.48 mm(12)
    • 25.58 mm(4)
    • 25.71 mm(2)
    • 31.83 mm(8)
    • 31.93 mm(4)
    • 32.06 mm(4)
    • 32.08 mm(8)
    • 32.18 mm(4)
    • 32.31 mm(4)
    • 32.41 mm(2)
    • 32.66 mm(2)
    • 38.28 mm(2)
    • 38.41 mm(2)
    • 38.76 mm(2)
    • 40.18 mm(2)
    • 40.31 mm(2)
    • 40.66 mm(2)
    F Dimension Min-F Dimension Max
    F Dimension
    F Dimension
    • 0.336 in(4)
    • 0.354 in(4)
    • 0.433 in(5)
    • 0.436 in(7)
    • 0.512 in(6)
    • 0.549 in(2)
    • 0.55 in(4)
    • 0.669 in(4)
    • 0.681 in(6)
    • 0.689 in(2)
    • 0.751 in(8)
    • 0.753 in(12)
    • 0.757 in(4)
    • 0.79 in(8)
    • 0.792 in(12)
    • 0.796 in(4)
    • 0.832 in(4)
    • 0.866 in(4)
    • 0.987 in(8)
    • 0.989 in(12)
    • 0.993 in(4)
    • 0.997 in(2)
    • 1.001 in(8)
    • 1.003 in(12)
    • 1.007 in(4)
    • 1.012 in(2)
    • 1.253 in(8)
    • 1.257 in(4)
    • 1.262 in(4)
    • 1.263 in(8)
    • 1.267 in(4)
    • 1.272 in(4)
    • 1.276 in(2)
    • 1.286 in(2)
    • 1.507 in(2)
    • 1.512 in(2)
    • 1.526 in(2)
    • 1.582 in(2)
    • 1.587 in(2)
    • 1.601 in(2)
    F Dimension Min-F Dimension Max
    Minimum Bore Diameter
    Minimum Bore Diameter
    • 0.625 in(4)
    • 0.63 in(4)
    • 0.787 in(12)
    • 0.984 in(10)
    • 1.0 in(2)
    • 1.25 in(6)
    • 1.26 in(6)
    • 1.5 in(4)
    • 1.575 in(4)
    Minimum Bore Diameter Min-Minimum Bore Diameter Max
    Minimum Bore Diameter
    Minimum Bore Diameter
    • 15.88 mm(4)
    • 16.0 mm(4)
    • 20.0 mm(12)
    • 25.0 mm(10)
    • 25.4 mm(2)
    • 31.75 mm(6)
    • 32.0 mm(6)
    • 38.1 mm(4)
    • 40.0 mm(4)
    Minimum Bore Diameter Min-Minimum Bore Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 15.88 mm(4)
    • 16.0 mm(4)
    • 20.0 mm(12)
    • 25.0 mm(10)
    • 25.4 mm(2)
    • 31.75 mm(6)
    • 32.0 mm(6)
    • 38.1 mm(4)
    • 40.0 mm(4)
    Minimum Axial Groove Diameter Min-Minimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.625 in(4)
    • 0.63 in(4)
    • 0.787 in(12)
    • 0.984 in(10)
    • 1.0 in(2)
    • 1.25 in(6)
    • 1.26 in(6)
    • 1.5 in(4)
    • 1.575 in(4)
    Minimum Axial Groove Diameter Min-Minimum Axial Groove Diameter Max
    Countersunk Angle
    Countersunk Angle
    • 17.5 (4)
    Countersunk Angle Min-Countersunk Angle Max
    Cutting Direction
    Cutting Direction
    • E (169)
    • S (31)
    Rake Angle Style
    Rake Angle Style
    • NEGATIVE-ZERO (34)
    • NEUTRAL (ZERO) (18)
    • POSITIVE-ZERO (40)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.945 in(4)
    • 1.0 in(4)
    • 1.25 in(6)
    • 1.259 in(2)
    • 1.26 in(2)
    • 1.5 in(6)
    • 1.575 in(4)
    • 1.586 in(2)
    • 1.59 in(2)
    • 1.969 in(2)
    • 1.98 in(4)
    • 2.0 in(7)
    • 2.496 in(2)
    • 2.5 in(1)
    • 2.519 in(1)
    • 2.52 in(3)
    Maximum Bore Depth Min-Maximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 24.0 mm(4)
    • 25.4 mm(4)
    • 31.75 mm(6)
    • 32.0 mm(4)
    • 38.1 mm(6)
    • 40.0 mm(4)
    • 40.28 mm(2)
    • 40.3 mm(2)
    • 50.0 mm(2)
    • 50.3 mm(4)
    • 50.8 mm(7)
    • 63.4 mm(2)
    • 63.5 mm(1)
    • 64.0 mm(3)
    • 64.01 mm(1)
    Maximum Bore Depth Min-Maximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (52)
    frontEnd
    Adapter Front-End
    Adapter Front-End
    • CARTRIDGE MOUNT (76)
    Clamp Style
    Clamp Style
    • Y (218)
    Cutting Width
    Cutting Width
    • 0.063 in(14)
    • 0.0787 in(52)
    • 0.0788 in(52)
    • 0.079 in(56)
    • 0.083 in(58)
    • 0.084 in(57)
    • 0.094 in(59)
    • 0.099 in(52)
    • 0.118 in(45)
    • 0.1181 in(40)
    • 0.123 in(53)
    • 0.125 in(50)
    • 0.13 in(51)
    • 0.157 in(47)
    • 0.1574 in(42)
    • 0.1575 in(42)
    • 0.158 in(42)
    • 0.161 in(42)
    • 0.162 in(42)
    • 0.1624 in(55)
    • 0.187 in(47)
    • 0.1875 in(47)
    • 0.192 in(54)
    • 0.1968 in(32)
    • 0.197 in(37)
    • 0.2018 in(44)
    • 0.202 in(33)
    • 0.236 in(39)
    • 0.2362 in(34)
    • 0.241 in(35)
    • 0.2411 in(46)
    • 0.25 in(46)
    • 0.255 in(42)
    • 0.276 in(34)
    • 0.281 in(34)
    • 0.2881 in(36)
    • 0.312 in(31)
    • 0.315 in(25)
    • 0.317 in(29)
    • 0.3199 in(33)
    • 0.32 in(20)
    • 0.375 in(8)
    • 0.38 in(8)
    • 0.394 in(8)
    • 0.399 in(8)
    Cutting Width Min-Cutting Width Max
    Cutting Width
    Cutting Width
    • 1.6 mm(14)
    • 2.0 mm(56)
    • 2.12 mm(63)
    • 2.125 mm(52)
    • 2.387 mm(52)
    • 2.388 mm(59)
    • 2.51 mm(52)
    • 2.511 mm(52)
    • 3.0 mm(45)
    • 3.125 mm(53)
    • 3.175 mm(49)
    • 3.177 mm(41)
    • 3.3 mm(45)
    • 3.301 mm(40)
    • 3.302 mm(46)
    • 4.0 mm(47)
    • 4.094 mm(42)
    • 4.125 mm(55)
    • 4.75 mm(47)
    • 4.76 mm(42)
    • 4.762 mm(42)
    • 4.763 mm(47)
    • 4.873 mm(43)
    • 4.877 mm(53)
    • 4.878 mm(42)
    • 5.0 mm(37)
    • 5.125 mm(45)
    • 6.0 mm(39)
    • 6.125 mm(47)
    • 6.346 mm(35)
    • 6.35 mm(45)
    • 6.477 mm(42)
    • 6.478 mm(34)
    • 7.0 mm(34)
    • 7.125 mm(34)
    • 7.317 mm(36)
    • 7.92 mm(25)
    • 7.925 mm(26)
    • 8.0 mm(25)
    • 8.051 mm(20)
    • 8.052 mm(29)
    • 8.125 mm(33)
    • 9.525 mm(8)
    • 9.651 mm(8)
    • 10.0 mm(8)
    • 10.125 mm(8)
    Cutting Width Min-Cutting Width Max
    Front End Type
    Front End Type
    • MCS - Modular Cartridge System (76)
    Insert Shape
    Insert Shape
    • PRISMATIC (441)
    Cartridge Size
    Cartridge Size
    • 50 (32)
    • 65 (10)
    Front End Style
    Front End Style
    • MCS01 Modular Deep Grooving (76)
    Insert Size
    Insert Size
    • 10 (8)
    • 1F (12)
    • 2 (48)
    • 3 (32)
    • 4 (32)
    • 5 (24)
    • 6 (28)
    • 8 (16)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.197 in(8)
    • 0.276 in(24)
    • 0.394 in(12)
    • 0.472 in(14)
    • 0.473 in(4)
    • 0.63 in(60)
    • 0.866 in(28)
    • 1.0236 in(2)
    • 1.024 in(52)
    • 1.26 in(26)
    • 1.575 in(12)
    Maximum Cutting Depth Min-Maximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 5.0 mm(8)
    • 7.0 mm(24)
    • 10.0 mm(12)
    • 12.0 mm(18)
    • 16.0 mm(60)
    • 22.0 mm(28)
    • 26.0 mm(54)
    • 32.0 mm(26)
    • 40.0 mm(12)
    Maximum Cutting Depth Min-Maximum Cutting Depth Max
    Gage Length
    Gage Length
    • 1.1020 in(2)
    • 1.2990 in(2)
    • 1.4960 in(2)
    • 1.6930 in(2)
    • 1.8500 in(6)
    • 1.8900 in(6)
    • 1.9290 in(4)
    • 2.1060 in(4)
    • 2.1850 in(2)
    • 2.2440 in(6)
    • 2.2830 in(6)
    • 2.3030 in(6)
    • 2.3820 in(2)
    • 2.5000 in(12)
    • 2.5790 in(2)
    • 2.6180 in(4)
    • 2.6970 in(4)
    • 2.8940 in(4)
    • 5.4390 in(2)
    • 5.4630 in(2)
    • 5.4820 in(2)
    • 5.5080 in(6)
    • 5.5280 in(6)
    • 5.5330 in(4)
    • 5.9060 in(2)
    • 6.0000 in(4)
    • 6.2260 in(2)
    • 6.2500 in(2)
    • 6.2700 in(2)
    • 6.5330 in(2)
    • 6.6930 in(2)
    • 7.0000 in(2)
    Gage Length
    Gage Length
    • 28.0000 mm(2)
    • 33.0000 mm(2)
    • 38.0000 mm(2)
    • 43.0000 mm(2)
    • 47.0000 mm(6)
    • 48.0000 mm(6)
    • 49.0000 mm(4)
    • 53.5000 mm(4)
    • 55.5000 mm(2)
    • 57.0000 mm(6)
    • 58.0000 mm(6)
    • 58.5000 mm(6)
    • 60.5000 mm(2)
    • 63.5000 mm(12)
    • 65.5000 mm(2)
    • 66.5000 mm(4)
    • 68.5000 mm(4)
    • 73.5000 mm(4)
    • 138.1500 mm(2)
    • 138.7500 mm(2)
    • 139.2500 mm(2)
    • 139.9000 mm(6)
    • 140.4000 mm(6)
    • 140.5500 mm(4)
    • 150.0000 mm(2)
    • 152.4000 mm(4)
    • 158.1500 mm(2)
    • 158.7500 mm(2)
    • 159.2500 mm(2)
    • 165.9500 mm(2)
    • 170.0000 mm(2)
    • 177.8000 mm(2)
    insertGeometry
    Shape
    Shape
    • PRISMATIC (199)
    Insert Seat Size
    Insert Seat Size
    • 2 (22)
    • 3 (41)
    • 4 (40)
    • 5 (18)
    • 6 (40)
    • 8 (38)
    Cutting Edge Length
    Cutting Edge Length
    • 0.252 mm(2)
    • 0.419 mm(2)
    Cutting Edge Length Min-Cutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 6.392 in(2)
    • 10.638 in(2)
    Cutting Edge Length Min-Cutting Edge Length Max
    Cutting Tool Material
    Cutting Tool Material
    • B L (220)
    • H W (441)
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (52)
    • SQUARE SHANK (148)
    System Size
    System Size
    • KM40TS (4)
    • KM4X63 (4)
    • KM50TS (8)
    • KM63TS (8)
    • KM63XMZ (8)
    • KM80ATC (8)
    • KM80TS (8)
    • PSC40 (4)
    • PSC50 (8)
    • PSC63 (8)
    • PSC80 (8)
    Back-End Diameter
    Back-End Diameter
    • 12.0 mm(4)
    • 12.7 mm(4)
    • 15.87 mm(4)
    • 15.875 mm(2)
    • 16.0 mm(6)
    • 19.05 mm(6)
    • 20.0 mm(6)
    • 25.0 mm(6)
    • 25.4 mm(6)
    • 31.7 mm(1)
    • 31.75 mm(3)
    • 32.0 mm(4)
    • 40.0 mm(8)
    • 50.0 mm(16)
    • 63.0 mm(28)
    • 80.0 mm(24)
    Back-End Diameter Min-Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 1.5748 in(4)
    • 1.575 in(4)
    • 1.9685 in(4)
    • 1.969 in(8)
    • 1.97 in(4)
    • 2.48 in(26)
    • 2.4803 in(2)
    • 3.15 in(24)
    Back-End Diameter Min-Back-End Diameter Max
    Shank Height
    Shank Height
    • 0.75 in(24)
    • 0.787 in(24)
    • 0.984 in(24)
    • 0.9843 in(2)
    • 1.0 in(26)
    • 1.25 in(18)
    • 1.2598 in(18)
    • 1.5 in(6)
    • 1.5748 in(6)
    Shank Height Min-Shank Height Max
    Shank Height
    Shank Height
    • 19.05 mm(24)
    • 20.0 mm(24)
    • 25.0 mm(26)
    • 25.4 mm(26)
    • 31.75 mm(18)
    • 32.0 mm(18)
    • 38.1 mm(6)
    • 40.0 mm(6)
    Shank Height Min-Shank Height Max
    Shank Width
    Shank Width
    • 0.75 in(24)
    • 0.787 in(24)
    • 0.984 in(24)
    • 0.9843 in(2)
    • 1.0 in(26)
    • 1.25 in(18)
    • 1.2598 in(18)
    • 1.5 in(6)
    • 1.5748 in(6)
    Shank Width Min-Shank Width Max
    Shank Width
    Shank Width
    • 19.05 mm(24)
    • 20.0 mm(24)
    • 25.0 mm(26)
    • 25.4 mm(26)
    • 31.75 mm(18)
    • 32.0 mm(18)
    • 38.1 mm(6)
    • 40.0 mm(6)
    Shank Width Min-Shank Width Max
    No filters matching ""
    Beyond Evolution
    Beyond Evolution Uçları
    (199)

    Beyond Evolution Uçları

    Beyond Evolution Modüler Sistemleri
    (178)

    Beyond Evolution Modüler Sistemleri

    Beyond Evolution Entegre Tutucular
    (148)

    Beyond Evolution Entegre Tutucular

    Beyond Evolution Delik Baraları
    (52)

    Beyond Evolution Delik Baraları

    Bize Sormak İstediğiniz Bir Şey Var Mı?

    Kalifiye personelimiz size yardımcı olmaya hazırdır.

    Satış ile İletişime Geçin

    Teknik sorularınız için lütfen Müşteri Destek merkezimiz aracılığıyla bize ulaşın

    öğesini Çözümlerim sayfanıza eklemek üzeresiniz. İlerlemek istiyor musunuz?
    Select the destination where you want to move -.
    Select the project where you want to add product(s) -.
    Yeni Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Lütfen geçerli bir ad girin
    Product(s) successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    ISO Katalog Numarası

    ANSI Katalog Numarası

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Pano bilgilerinizi görmek için oturum açmalısınız
    Session expired due to inactivity, please login again
    Sepete eklemeye çalıştığınız ürün(ler) () temin edilemiyor, lütfen müşteri hizmetlerine ulaşın.
    ürün(ler) sepete başarıyla eklendi
    Sepeti Görüntüle

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Katalog Numarası Kalite  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk