Benzer Ürün:
7792VXE16 Series • End Mill • Cylindrical Shank • Metric
High-Feed copy milling cutter for multiple materials.
Ürün Numarası5659563
ISO Katalog No7792VXE16CA050Z3R102ANSI Catalog No7792VXE16CA050Z3R102
- P Steel
- M Stainless Steel
- K Cast Iron
- S High-Temp Alloys
- H Hardened Materials
- Spiral Circular
- Slotting: Shoulder
- Face Milling
- Helical Milling
- Ramping: Blank
- Pocketing
- Counter Boring
- Plunge Milling: Ball Nose
- Inclined Square End Mill
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
- Genel Bakış
- Uygulama bilgisi
- İndirilenler
- Uyumlu Parçalar Makine Tarafı
- Uyumlu Parçalar İş Parçası Tarafı
- Yedek Parçalar
- Yorum
- Soru&Cevap
Ürün Numarası | 5659563 |
ISO Katalog No | 7792VXE16CA050Z3R102 |
ANSI Catalog No | 7792VXE16CA050Z3R102 |
[D1MAX] Maximum Cutting Diameter | 50 mm |
[D1MAX] Maximum Cutting Diameter | 1.969 in |
[D] Adapter / Shank / Bore Diameter | 40 mm |
[D] Adapter / Shank / Bore Diameter | 1.575 in |
[D1] Effective Cutting Diameter | 25.83 mm |
[D1] Effective Cutting Diameter | 1.017 in |
[L] Overall Length | 172 mm |
[L] Overall Length | 6.772 in |
[L2] Head Length | 102 mm |
[L2] Head Length | 4.015 in |
[AP1MAX] 1st Maximum Cutting Depth | 3.5 mm |
[AP1MAX] 1st Maximum Cutting Depth | .138 in |
[Z] Number of Flutes | 3 |
İş Parçası Malzemeleri
- Steel
- Stainless Steel
- Cast Iron
- High-Temp Alloys
- Hardened Materials
Kullanım ve uygulama alanları
- Spiral Circular
- Slotting: Shoulder
- Face Milling
- Helical Milling
- Ramping: Blank
- Pocketing
- Counter Boring
- Plunge Milling: Ball Nose
- Inclined Square End Mill
Özellikler ve avantajlar
- Internal coolant supply.
- Positive design to support low cutting forces and applications with long overhang.
İlerleme ve Devir hesaplamak için Çözüm Oluşturun
Bir çözüm oluşturduktan sonra, sadece İlerleme ve Devir simgesini seçin ve sistemimiz öneriler sunacaktır. Makinenizi ve teknik özelliklerinizi ekleyerek bilgileri özelleştirebilir veya kaydırıcıları kullanarak ayarlamalar yapabilirsiniz.
Uç Seçimi
Kesici uç seçme rehberi • IC (Kesici uç köşe radyüs ölçüsü) 12
7792 Series • IC16 • Insert Selection Guide | ||||||
Malzeme grubu | Hafif işleme | Genel amaçlı kullanım | Ağır işleme | |||
– | (Hafif geometri) | – | (Sert geometri) | |||
– | Aşınma direnci | Tokluk | ||||
– | Geometri | Kalite | Geometri | Kalite | Geometri | Kalite |
P1-P2 | ...M41 | KCPM40 | ...M41 | KCPM40 | ...D41 | KCPM40 |
P3-P4 | ...M41 | KCPM40 | …D | KCPM40 | …D41 | KCPM40 |
P5-P6 | ...M41 | KCPM40 | ...D41 | KCPM40 | ...D41 | KCPM40 |
M1-M2 | ...M41 | KCSM40 | ...D41 | KCSM40 | ...D41 | KCSM40 |
M3 | ...M41 | KCSM40 | ...D41 | KCSM40 | ...D41 | KCSM40 |
K1-K2 | …D | KCK15 | …D | KCK15 | …D | KCPK30 |
K3 | …D | KCPK30 | …D | KCPK30 | …D | KCPK30 |
N1-N2 | – | – | – | – | – | – |
N3 | – | – | – | – | – | – |
S1-S2 | ...M41 | KCSM40 | ...D41 | KCSM40 | ...D41 | KCSM40 |
S3 | KCSM40 | SP6519 | ...D41 | KCSM40 | ...D41 | KCSM40 |
S4 | KCSM40 | SP6519 | ...D41 | KCSM40 | ...D41 | KCSM40 |
H1 | …D | KC522M | …D | KC522M | …D | KC522M |
İlerlemeler
7792 Series • IC16 • Recommended Starting Feeds [mm/th] | |||||||
Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | ||||||
DOC | 30% | 40–100% | |||||
(mm) | L | M | H | L | M | H | |
.S..D | 3,5 | 0,21 | 0,52 | 0,83 | 0,19 | 0,47 | 0,76 |
.S..D | 2,5 | 0,24 | 0,61 | 0,97 | 0,22 | 0,55 | 0,89 |
.S..D | 2 | 0,27 | 0,67 | 1,08 | 0,25 | 0,62 | 0,99 |
.E..D41 | 3,5 | 0,14 | 0,46 | 0,76 | 0,13 | 0,42 | 0,70 |
.E..D41 | 2,5 | 0,17 | 0,54 | 0,89 | 0,15 | 0,49 | 0,82 |
.E..D41 | 2 | 0,19 | 0,60 | 0,99 | 0,17 | 0,55 | 0,91 |
.E..M41 | 2,7 | 0,14 | 0,46 | 0,76 | 0,13 | 0,42 | 0,70 |
.E..M41 | 2 | 0,19 | 0,60 | 0,99 | 0,17 | 0,55 | 0,91 |
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate. |
7792 Series • IC16 • Recommended Starting Feeds for Plunging [mm/th] | ||||
Kesici uç geometrisi | Diş başına programlanan ilerleme (fz) | |||
L | M | H | ||
.S..D | 0,10 | 0,25 | 0,41 | |
.E..D41 | 0,07 | 0,23 | 0,38 | |
.E..M41 | 0,07 | 0,23 | 0,38 | |
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate. |
7792 Series • IC16 • Recommended Starting Feeds [IPT] | |||||||
Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | ||||||
DOC | 30% | 40–100% | |||||
(Inch) | L | M | H | L | M | H | |
.S..D | 0.14 | 0.008 | 0.020 | 0.032 | 0.007 | 0.019 | 0.030 |
.S..D | 0.1 | 0.009 | 0.024 | 0.038 | 0.009 | 0.022 | 0.035 |
.S..D | 0.08 | 0.011 | 0.026 | 0.042 | 0.010 | 0.024 | 0.039 |
.E..D41 | 0.14 | 0.006 | 0.018 | 0.030 | 0.005 | 0.017 | 0.028 |
.E..D41 | 0.1 | 0.007 | 0.021 | 0.036 | 0.006 | 0.019 | 0.032 |
.E..D41 | 0.08 | 0.007 | 0.024 | 0.039 | 0.007 | 0.022 | 0.036 |
.E..M41 | 0.107 | 0.006 | 0.018 | 0.030 | 0.005 | 0.017 | 0.028 |
.E..M41 | 0.08 | 0.007 | 0.024 | 0.039 | 0.007 | 0.022 | 0.036 |
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate. |
7792 Series • IC16 • Recommended Starting Feeds for Plunging [IPT] | ||||
Kesici uç geometrisi | Diş başına programlanan ilerleme (fz) | |||
L | M | H | ||
.S..D | 0.004 | 0.010 | 0.016 | |
.E..D41 | 0.003 | 0.009 | 0.015 | |
.E..M41 | 0.003 | 0.009 | 0.015 | |
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use Light Machining values as starting feed rate. |
Hızlar
Önerilen başlangıç hızları [m/dk.]
7792 Series IC16 • Recommended Starting Speed [m/min] | |||||||||||||||||||||||||
Kalite | KC522M | KCPK30 | KCPM40 | KCSM40 | SC6525 | SP6519 | X400 | X500 | |||||||||||||||||
Talaş kalınlığı hex mm | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | |||||||||
Malzeme grubu | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | |
P | 1 | 330 | 285 | 270 | 455 | 395 | 370 | 295 | 260 | 245 | 350 | 320 | 300 | 371 | 254 | 142 | 295 | 215 | 130 | 260 | 190 | 120 | 270 | 200 | 130 |
2 | 275 | 240 | 200 | 280 | 255 | 230 | 250 | 215 | 180 | 300 | 270 | 220 | 325 | 225 | 121 | 260 | 190 | 115 | 230 | 170 | 105 | 240 | 280 | 115 | |
3 | 255 | 215 | 175 | 255 | 230 | 205 | 230 | 195 | 160 | 280 | 240 | 195 | 292 | 200 | 104 | 230 | 165 | 100 | 200 | 150 | 95 | 210 | 155 | 100 | |
4 | 225 | 185 | 150 | 225 | 185 | 160 | 205 | 170 | 135 | 240 | 205 | 165 | 208 | 145 | 79 | 175 | 125 | 75 | 150 | 110 | 70 | 160 | 120 | 75 | |
5 | 185 | 170 | 150 | 190 | 170 | 150 | 170 | 155 | 135 | 200 | 180 | 160 | 158 | 120 | 79 | 140 | 105 | 70 | – | – | – | 130 | 100 | 70 | |
6 | 165 | 125 | 100 | 160 | 135 | 110 | 150 | 115 | 90 | 180 | 140 | 100 | 142 | 100 | 58 | 120 | 85 | 50 | – | – | – | 110 | 80 | 50 | |
M | 1 | 205 | 180 | 165 | 205 | 185 | 155 | 195 | 170 | 155 | 260 | 210 | 185 | 192 | 154 | 121 | 270 | 195 | 115 | – | – | – | 250 | 185 | 115 |
2 | 185 | 160 | 130 | 185 | 160 | 140 | 175 | 150 | 125 | 235 | 180 | 145 | 258 | 183 | 108 | 235 | 170 | 105 | – | – | – | 220 | 160 | 100 | |
3 | 140 | 120 | 95 | 145 | 130 | 115 | 130 | 115 | 90 | 175 | 145 | 110 | 208 | 150 | 92 | 195 | 140 | 85 | – | – | – | 180 | 130 | 80 | |
K | 1 | 230 | 205 | 185 | 295 | 265 | 240 | – | – | – | – | – | – | 392 | 271 | 146 | – | – | – | – | – | – | – | – | – |
2 | 180 | 160 | 150 | 235 | 210 | 190 | – | – | – | – | – | – | 304 | 208 | 117 | – | – | – | – | – | – | – | – | – | |
3 | 150 | 135 | 120 | 195 | 175 | 160 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
S | 1 | 40 | 35 | 25 | – | – | – | 40 | 35 | 30 | 50 | 40 | 25 | – | – | – | 55 | 40 | 20 | – | – | – | 45 | 35 | 25 |
2 | 40 | 35 | 25 | – | – | – | 40 | 35 | 30 | 55 | 40 | 25 | – | – | – | 45 | 35 | 20 | – | – | – | 45 | 30 | 20 | |
3 | 50 | 40 | 25 | – | – | – | 50 | 40 | 30 | 65 | 45 | 30 | – | – | – | 55 | 40 | 25 | – | – | – | 50 | 40 | 25 | |
4 | 50 | 45 | 35 | 50 | 45 | 35 | 55 | 50 | 35 | 75 | 60 | 40 | – | – | – | 80 | 55 | 35 | – | – | – | 60 | 50 | 35 | |
H | 1 | 120 | 90 | 70 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 95 | 70 | 45 | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 80 | 60 | 35 | – | – | – | |
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. |
7792 Series IC16 • Recommended Starting Speed [SFM] | |||||||||||||||||||||||||
Kalite | KC522M | KCPK30 | KCPM40 | KCSM40 | SC6525 | SP6519 | X400 | X500 | |||||||||||||||||
Chip Thickness hex Inch | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | Min. | Maks. | |||||||||
Malzeme grubu | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | |
P | 1 | 1085 | 935 | 885 | 1495 | 1295 | 1215 | 970 | 855 | 805 | 1150 | 1050 | 985 | 1217 | 833 | 458 | 970 | 705 | 425 | 855 | 625 | 395 | 885 | 655 | 425 |
2 | 900 | 785 | 655 | 920 | 835 | 755 | 820 | 705 | 590 | 985 | 885 | 720 | 1067 | 742 | 396 | 855 | 625 | 375 | 755 | 560 | 345 | 785 | 920 | 375 | |
3 | 835 | 705 | 575 | 835 | 755 | 675 | 755 | 640 | 525 | 920 | 785 | 640 | 950 | 654 | 346 | 755 | 540 | 330 | 655 | 490 | 310 | 690 | 510 | 330 | |
4 | 740 | 605 | 490 | 740 | 605 | 525 | 675 | 560 | 445 | 785 | 675 | 540 | 692 | 475 | 258 | 575 | 410 | 245 | 490 | 360 | 230 | 525 | 395 | 245 | |
5 | 605 | 560 | 490 | 625 | 560 | 490 | 560 | 510 | 445 | 655 | 590 | 525 | 525 | 396 | 258 | 460 | 345 | 230 | – | – | – | 425 | 330 | 230 | |
6 | 540 | 410 | 330 | 525 | 445 | 360 | 490 | 375 | 295 | 590 | 460 | 330 | 458 | 329 | 196 | 395 | 280 | 165 | – | – | – | 360 | 260 | 165 | |
M | 1 | 675 | 590 | 540 | 675 | 605 | 510 | 640 | 560 | 510 | 855 | 690 | 605 | 625 | 508 | 396 | 885 | 640 | 375 | – | – | – | 820 | 605 | 375 |
2 | 605 | 525 | 425 | 605 | 525 | 460 | 575 | 490 | 410 | 770 | 590 | 475 | 854 | 604 | 358 | 770 | 560 | 345 | – | – | – | 720 | 525 | 330 | |
3 | 460 | 395 | 310 | 475 | 425 | 375 | 425 | 375 | 295 | 575 | 475 | 360 | 692 | 492 | 296 | 640 | 460 | 280 | – | – | – | 590 | 425 | 260 | |
K | 1 | 755 | 675 | 605 | 970 | 870 | 785 | – | – | – | – | – | – | 1279 | 883 | 475 | – | – | – | – | – | – | – | – | – |
2 | 590 | 525 | 490 | 770 | 690 | 625 | – | – | – | – | – | – | 1000 | 692 | 375 | – | – | – | – | – | – | – | – | – | |
3 | 490 | 445 | 395 | 640 | 575 | 525 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
S | 1 | 130 | 115 | 80 | – | – | – | 130 | 115 | 100 | 165 | 130 | 80 | – | – | – | 180 | 130 | 65 | – | – | – | 150 | 115 | 80 |
2 | 130 | 115 | 80 | – | – | – | 130 | 115 | 100 | 180 | 130 | 80 | – | – | – | 150 | 115 | 65 | – | – | – | 150 | 100 | 65 | |
3 | 165 | 130 | 80 | – | – | – | 165 | 130 | 100 | 215 | 150 | 100 | – | – | – | 180 | 130 | 80 | – | – | – | 165 | 130 | 80 | |
4 | 165 | 150 | 115 | 165 | 150 | 115 | 180 | 165 | 115 | 245 | 195 | 130 | – | – | – | 260 | 180 | 115 | – | – | – | 195 | 165 | 115 | |
H | 1 | 395 | 295 | 230 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 310 | 230 | 150 | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 260 | 195 | 115 | – | – | – | |
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. |
Uygulama bilgisi
7792 Series IC16 • Ramping Application Data • Curved Edges • Metric | |||||
D1 maks | Rampalama açısı (°) | ae maks | Yüzey frezeleme kanalı ölçüsü | DH min [mm] - (min hole diameter) | DH min (minumum delik çapı) |
40 | 2.55° | 13 | 16,3 | 50 | 78 |
50 | 1.36° | 13 | 26,1 | 70 | 98 |
52 | 1.24° | 13 | 28 | 74 | 102 |
63 | 0.86° | 13 | 39 | 96 | 124 |
66 | 0.8° | 13 | 41,9 | 102 | 130 |
80 | 0.58° | 13 | 55,9 | 130 | 158 |
100 | 0.42° | 13 | 75,9 | 170 | 198 |
125 | 0.32° | 13 | 100,9 | 220 | 248 |
160 | 0.23° | 13 | 135,8 | 290 | 318 |
NOTE: Maximum ramp angle decreases as nose radius increases. |
7792 Series IC16 • Ramping Application Data • Straight-Edged Inserts • Metric | |||||
D1 maks | Rampalama açısı (°) | ae maks | Yüzey frezeleme kanalı ölçüsü | DH min [mm] - (min hole diameter) | DH min (minumum delik çapı) |
40 | 3.7° | 12,3 | 17,85 | 50 | 78 |
50 | 2.25° | 12,3 | 27,72 | 70 | 98 |
52 | 1.65° | 12,3 | 29,82 | 74 | 102 |
63 | 1.4° | 12,3 | 40,8 | 96 | 124 |
66 | 1.3° | 12,3 | 43,7 | 102 | 130 |
80 | 0.8° | 12,3 | 57,7 | 130 | 158 |
100 | 0.65° | 12,3 | 77,53 | 170 | 198 |
125 | 0.5° | 12,3 | 102,5 | 220 | 248 |
160 | 0.27° | 12,3 | 137,46 | 290 | 318 |
NOTE: Maximum ramp angle decreases as nose radius increases. |
7792 Series IC16 • Programing Data • Curved Edges • Metric [mm] | |||
IC | Köşe radyüsu | R | L |
06 | 0,8 | 1,37 | 0,4 |
09 | 0,8 | 2,01 | 0,73 |
1,2 | 2,27 | 0,67 | |
12 | 0,8 | 2,5 | 1,02 |
1,2 | 2,73 | 0,97 | |
16 | 1,2 | 4,18 | 1,46 |
7792 Series IC16 • Programing Data • Straight-Edged Inserts • Metric [mm] | |||
IC | Köşe radyüsu | R | L |
06 | 0,8 | 1,46 | 0,529 |
09 | 0,8 | 2,13 | 1,025 |
1,2 | 2,25 | 0,95 | |
12 | 0,8 | 2,46 | 1,33 |
1,2 | 2,79 | 1,27 | |
2 | 3,42 | 1,13 | |
16 | 1,2 | 3,56 | 1,82 |
CNC Program • Corner Radius Definition The use of common CAD/CAM systems requires a round insert dimension to be known for cavity machining. For finish pass applications: Wiper facet for finishing use max. feed 0,8mm. |
7792 Series IC16 • Ramping Application Data • Straight-Edged Inserts • Inch | |||||
D1 maks | Rampalama açısı (°) | ae maks | Yüzey frezeleme kanalı ölçüsü | DH min [Inch] - (min hole diameter) | DH min (minumum delik çapı) |
1.5 | 4.53° | 0.484 | 0.628 | 1.818 | 2.921 |
2.0 | 2.44° | 0.484 | 1.122 | 2.818 | 3.921 |
2.5 | 1.51° | 0.484 | 1.626 | 3.818 | 4.921 |
3.0 | 0.96° | 0.484 | 2.122 | 4.818 | 5.921 |
4.0 | 0.62° | 0.484 | 3.114 | 6.818 | 7.921 |
5.0 | 0.52° | 0.484 | 4.114 | 8.818 | 9.921 |
6.0 | 0.32° | 0.484 | 5.115 | 10.818 | 11.921 |
NOTE: Maximum ramp angle decreases as nose radius increases. |
7792 Series IC16 • Ramping Application Data • Curved Edges • Inch | |||||
D1 maks | Rampalama açısı (°) | ae maks | Yüzey frezeleme kanalı ölçüsü | DH min [Inch] - (min hole diameter) | DH min (minumum delik çapı) |
1.5 | 3° | 0.512 | 0.55 | 1.818 | 2.921 |
2.0 | 2.85° | 0.512 | 1.05 | 2.818 | 3.921 |
2.5 | 1° | 0.512 | 1.56 | 3.818 | 4.921 |
3.0 | 0.58° | 0.512 | 1.96 | 4.818 | 5.921 |
4.0 | 0.51° | 0.512 | 2.96 | 6.818 | 7.921 |
5.0 | 0.37° | 0.512 | 3.96 | 8.818 | 9.921 |
6.0 | 0.27° | 0.512 | 4.96 | 10.818 | 11.921 |
NOTE: Maximum ramp angle decreases as nose radius increases. |
7792 Series IC16 • Programing Data • Curved Edges • Inch [inch] | |||
IC | Köşe radyüsu | R | L |
06 | 0.031 | 0.057 | 0.016 |
09 | 0.031 | 0.079 | 0.028 |
0.047 | 0.089 | 0.026 | |
12 | 0.031 | 0.098 | 0.040 |
0.047 | 0.107 | 0.038 | |
16 | 0.047 | 0.164 | 0.057 |
7792 Series IC16 • Programing Data • Straight-Edged Inserts • Inch [inch] | |||
IC | Köşe radyüsu | R | L |
06 | 0.031 | 0.057 | 0.021 |
09 | 0.031 | 0.084 | 0.040 |
0.047 | 0.088 | 0.037 | |
12 | 0.031 | 0.097 | 0.052 |
0.047 | 0.109 | 0.050 | |
0.079 | 0.134 | 0.044 | |
16 | 0.047 | 0.140 | 0.072 |
CNC Program • Corner Radius Definition The use of common CAD/CAM systems requires a round insert dimension to be known for cavity machining. For finish pass applications: Wiper facet for finishing use max. feed 0.031". |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use