Drilling
Drilling: Stacked Plates
DIN number 6535
DIN number 6537
Drilling - Through Coolant
Through Coolant: MQL (Minimum Quantity Lubricant): Drilling
Shank - Cylindrical Whistle Notch 2°
Helix Angle: 30°Downloaded file will be available after import in the {{cadTool}} tool library.
| Ürün Numarası | 4149589 |
| ISO Katalog No | B052F19700CPG |
| ANSI Catalog No | B052F19700CPG |
| Grade | KC7325 |
| [D1] Drill Diameter M | 19.7 mm |
| [D1] Drill Diameter M | 0.7756 in |
| [L] Overall Length | 153 mm |
| [L] Overall Length | 6.0236 in |
| [L3] Flute Length | 101 mm |
| [L3] Flute Length | 3.9764 in |
| [L4] Maximum Drilling Depth | 77 mm |
| [L4] Maximum Drilling Depth | 3.0315 in |
| [L5] Drill Point Length | 3.43 mm |
| [L5] Drill Point Length | 0.135 in |
| [LS] Shank Length | 50 mm |
| [LS] Shank Length | 1.9685 in |
| [D] Adapter / Shank / Bore Diameter | 20 mm |
| [D] Adapter / Shank / Bore Diameter | 0.7874 in |
DrillingDrilling: Stacked PlatesDIN number 6535DIN number 6537Drilling - Through CoolantThrough Coolant: MQL (Minimum Quantity Lubricant): DrillingShank - Cylindrical Whistle Notch 2°Helix Angle: 30°Kaliteler
KC7325
Composition: Multilayered PVD TiN-TiAlN coated fine-grain carbide with a TiN top layer for better wear identification.
Application: This multipurpose grade has been combined with a unique general-purpose cutting geometry to offer high versatility and reliability across all material groups at intermediate cutting conditions.
İlerleme ve Devir hesaplamak için Çözüm Oluşturun
Bir çözüm oluşturduktan sonra, sadece İlerleme ve Devir simgesini seçin ve sistemimiz öneriler sunacaktır. Makinenizi ve teknik özelliklerinizi ekleyerek bilgileri özelleştirebilir veya kaydırıcıları kullanarak ayarlamalar yapabilirsiniz.
| Malzeme grubu |  |  | |||||||||||||
| Kesme hızı | Metrik | ||||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||||
| Min. | Başlangıç değeri | Maks. | 1,0 | 2,0 | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| P | 0 | 70 | 80 | 115 | mm/dev | 0,03–0,08 | 0,04–0,09 | 0,05–0,11 | 0,08–0,14 | 0,09–0,19 | 0,11–0,22 | 0,13–0,26 | 0,15–0,30 | 0,19–0,36 | 0,24–0,46 |
| 1 | 70 | 100 | 140 | mm/dev | 0,04–0,09 | 0,05–0,12 | 0,07–0,14 | 0,08–0,16 | 0,11–0,22 | 0,13–0,26 | 0,15–0,31 | 0,18–0,35 | 0,22–0,42 | 0,28–0,54 | |
| 2 | 90 | 120 | 140 | mm/dev | 0,04–0,09 | 0,05–0,12 | 0,07–0,14 | 0,08–0,16 | 0,12–0,22 | 0,14–0,26 | 0,17–0,31 | 0,20–0,35 | 0,24–0,42 | 0,31–0,53 | |
| 3 | 60 | 80 | 100 | mm/dev | 0,05–0,10 | 0,06–0,13 | 0,08–0,15 | 0,09–0,17 | 0,13–0,23 | 0,15–0,28 | 0,19–0,33 | 0,22–0,38 | 0,26–0,47 | 0,34–0,59 | |
| 4 | 50 | 80 | 100 | mm/dev | 0,05–0,10 | 0,06–0,13 | 0,07–0,15 | 0,08–0,17 | 0,12–0,23 | 0,14–0,28 | 0,17–0,33 | 0,19–0,38 | 0,23–0,47 | 0,29–0,59 | |
| 5 | 40 | 50 | 70 | mm/dev | 0,03–0,05 | 0,04–0,06 | 0,05–0,07 | 0,06–0,10 | 0,08–0,14 | 0,10–0,18 | 0,12–0,22 | 0,14–0,24 | 0,18–0,32 | 0,23–0,41 | |
| 6 | 40 | 50 | 70 | mm/dev | 0,03–0,05 | 0,04–0,06 | 0,05–0,08 | 0,06–0,10 | 0,08–0,14 | 0,10–0,18 | 0,13–0,22 | 0,14–0,24 | 0,18–0,32 | 0,23–0,41 | |
| M | 1 | 20 | 30 | 40 | mm/dev | 0,02–0,05 | 0,03–0,06 | 0,04–0,07 | 0,05–0,09 | 0,08–0,11 | 0,09–0,12 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,16–0,20 |
| 2 | 30 | 40 | 50 | mm/dev | 0,02–0,06 | 0,03–0,07 | 0,04–0,08 | 0,06–0,10 | 0,08–0,12 | 0,09–0,14 | 0,10–0,16 | 0,12–0,18 | 0,14–0,20 | 0,16–0,22 | |
| 3 | 20 | 30 | 40 | mm/dev | 0,02–0,05 | 0,03–0,06 | 0,04–0,07 | 0,05–0,09 | 0,08–0,11 | 0,09–0,12 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 | 0,16–0,20 | |
| K | 1 | 80 | 120 | 170 | mm/dev | 0,08–0,16 | 0,09–0,17 | 0,11–0,22 | 0,12–0,24 | 0,16–0,31 | 0,20–0,38 | 0,23–0,44 | 0,25–0,49 | 0,31–0,60 | 0,38–0,74 |
| 2 | 80 | 110 | 140 | mm/dev | 0,10–0,14 | 0,11–0,15 | 0,12–0,16 | 0,13–0,19 | 0,16–0,25 | 0,20–0,31 | 0,23–0,36 | 0,25–0,40 | 0,31–0,48 | 0,38–0,60 | |
| 3 | 80 | 100 | 130 | mm/dev | 0,05–0,13 | 0,07–0,15 | 0,08–0,17 | 0,09–0,19 | 0,12–0,25 | 0,14–0,30 | 0,17–0,35 | 0,19–0,40 | 0,24–0,48 | 0,30–0,60 | |
| N | 1 | 90 | 230 | 315 | mm/dev | 0,05–0,12 | 0,06–0,13 | 0,08–0,14 | 0,10–0,16 | 0,12–0,20 | 0,16–0,24 | 0,20–0,28 | 0,24–0,32 | 0,28–0,40 | 0,32–0,48 |
| 2 | 90 | 225 | 270 | mm/dev | 0,04–0,08 | 0,06–0,12 | 0,08–0,16 | 0,10–0,20 | 0,12–0,24 | 0,16–0,28 | 0,20–0,32 | 0,24–0,36 | 0,28–0,44 | 0,32–0,52 | |
| 3 | 90 | 180 | 270 | mm/dev | 0,10–0,13 | 0,11–0,14 | 0,12–0,14 | 0,13–0,16 | 0,14–0,20 | 0,16–0,24 | 0,20–0,28 | 0,24–0,32 | 0,28–0,40 | 0,32–0,44 | |
| 4 | 90 | 135 | 180 | mm/dev | 0,04–0,08 | 0,06–0,12 | 0,08–0,16 | 0,10–0,20 | 0,12–0,24 | 0,16–0,28 | 0,20–0,32 | 0,24–0,36 | 0,28–0,40 | 0,32–0,48 | |
| S | 1 | 10 | 25 | 30 | mm/dev | 0,01–0,04 | 0,02–0,05 | 0,03–0,06 | 0,04–0,08 | 0,06–0,10 | 0,08–0,12 | 0,09–0,13 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 |
| 2 | 10 | 20 | 25 | mm/dev | 0,01–0,03 | 0,02–0,03 | 0,02–0,04 | 0,03–0,06 | 0,05–0,08 | 0,07–0,10 | 0,08–0,11 | 0,09–0,12 | 0,10–0,14 | 0,11–0,16 | |
| 3 | 10 | 25 | 30 | mm/dev | 0,01–0,03 | 0,02–0,03 | 0,02–0,04 | 0,02–0,05 | 0,04–0,07 | 0,06–0,09 | 0,07–0,10 | 0,08–0,11 | 0,09–0,13 | 0,10–0,15 | |
| 4 | 10 | 25 | 40 | mm/dev | 0,01–0,03 | 0,02–0,03 | 0,02–0,04 | 0,03–0,06 | 0,05–0,08 | 0,07–0,10 | 0,08–0,11 | 0,09–0,12 | 0,10–0,14 | 0,11–0,16 | |
| H | 1 | 10 | 15 | 30 | mm/dev | 0,01–0,03 | 0,02–0,03 | 0,02–0,04 | 0,03–0,06 | 0,05–0,08 | 0,07–0,10 | 0,08–0,11 | 0,09–0,12 | 0,10–0,14 | 0,11–0,16 |
| 2 | 10 | 10 | 30 | mm/dev | 0,01–0,03 | 0,02–0,03 | 0,02–0,04 | 0,02–0,05 | 0,04–0,07 | 0,06–0,09 | 0,07–0,10 | 0,08–0,11 | 0,09–0,13 | 0,10–0,15 | |
| Malzeme grubu | | | |||||||||||||
| Malzeme grubu | Kesme hızı | İnç | |||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||||
| Min. | Başlangıç değeri | Maks. | 3/64 .047 | 5/64 .078 | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| P | 0 | 230 | 260 | 380 | IPR | .001–.003 | .002–.004 | .002–.004 | .003–.005 | .004–.007 | .004–.009 | .005–.010 | .006–.012 | .007–.014 | .009–.018 |
| 1 | 230 | 330 | 460 | IPR | .002–.004 | .002–.005 | .003–.006 | .003–.006 | .004–.009 | .005–.010 | .006–.012 | .007–.014 | .009–.017 | .011–.021 | |
| 2 | 300 | 390 | 460 | IPR | .002–.004 | .002–.005 | .003–.006 | .003–.006 | .005–.009 | .006–.010 | .007–.012 | .008–.014 | .009–.017 | .012–.021 | |
| 3 | 200 | 260 | 330 | IPR | .002–.004 | .002–.005 | .003–.006 | .004–.007 | .005–.009 | .006–.011 | .008–.013 | .009–.015 | .010–.019 | .013–.023 | |
| 4 | 160 | 260 | 330 | IPR | .002–.004 | .002–.005 | .003–.006 | .003–.007 | .005–.009 | .006–.011 | .007–.013 | .008–.015 | .009–.019 | .011–.023 | |
| 5 | 130 | 160 | 230 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.006 | .004–.007 | .005–.009 | .006–.009 | .007–.013 | .009–.016 | |
| 6 | 130 | 160 | 230 | IPR | .001–.002 | .002–.002 | .002–.003 | .002–.004 | .003–.006 | .004–.007 | .005–.009 | .006–.009 | .007–.013 | .009–.016 | |
| M | 1 | 70 | 100 | 130 | IPR | .001–.002 | .001–.002 | .002–.003 | .002–.004 | .003–.004 | .004–.005 | .004–.006 | .005–.006 | .006–.007 | .006–.008 |
| 2 | 100 | 130 | 160 | IPR | .001–.002 | .001–.003 | .002–.003 | .002–.004 | .003–.005 | .004–.006 | .004–.006 | .005–.007 | .006–.008 | .006–.009 | |
| 3 | 70 | 100 | 130 | IPR | .001–.002 | .001–.002 | .002–.003 | .002–.004 | .003–.004 | .004–.005 | .004–.006 | .005–.006 | .006–.007 | .006–.008 | |
| K | 1 | 260 | 390 | 560 | IPR | .003–.006 | .004–.007 | .004–.009 | .005–.009 | .006–.012 | .008–.015 | .009–.017 | .010–.019 | .012–.024 | .015–.029 |
| 2 | 260 | 360 | 460 | IPR | .004–.006 | .004–.006 | .005–.006 | .005–.008 | .006–.010 | .008–.012 | .009–.014 | .010–.016 | .012–.019 | .015–.024 | |
| 3 | 260 | 330 | 430 | IPR | .002–.005 | .003–.006 | .003–.007 | .004–.008 | .005–.010 | .006–.012 | .007–.014 | .008–.016 | .009–.019 | .012–.024 | |
| N | 1 | 300 | 750 | 1030 | IPR | .002–.005 | .002–.005 | .003–.006 | .004–.006 | .005–.008 | .006–.009 | .008–.011 | .009–.013 | .011–.016 | .013–.019 |
| 2 | 300 | 740 | 890 | IPR | .002–.003 | .002–.005 | .003–.006 | .004–.008 | .005–.009 | .006–.011 | .008–.013 | .009–.014 | .011–.017 | .013–.021 | |
| 3 | 300 | 590 | 890 | IPR | .004–.005 | .004–.006 | .005–.006 | .005–.006 | .006–.008 | .006–.009 | .008–.011 | .009–.013 | .011–.016 | .013–.017 | |
| 4 | 300 | 440 | 590 | IPR | .002–.003 | .002–.005 | .003–.006 | .004–.008 | .005–.009 | .006–.011 | .008–.013 | .009–.014 | .011–.016 | .013–.019 | |
| S | 1 | 30 | 80 | 100 | IPR | .000–.002 | .001–.002 | .001–.002 | .002–.003 | .002–.004 | .003–.005 | .004–.005 | .004–.006 | .005–.006 | .006–.007 |
| 2 | 30 | 70 | 80 | IPR | .000–.001 | .001–.001 | .001–.002 | .001–.002 | .002–.003 | .003–.004 | .003–.004 | .004–.005 | .004–.006 | .004–.006 | |
| 3 | 30 | 80 | 100 | IPR | .000–.001 | .001–.001 | .001–.002 | .001–.002 | .002–.003 | .002–.004 | .003–.004 | .003–.004 | .004–.005 | .004–.006 | |
| 4 | 30 | 80 | 130 | IPR | .000–.001 | .001–.001 | .001–.002 | .001–.002 | .002–.003 | .003–.004 | .003–.004 | .004–.005 | .004–.006 | .004–.006 | |
| H | 1 | 30 | 50 | 100 | IPR | .000–.001 | .001–.001 | .001–.002 | .001–.002 | .002–.003 | .003–.004 | .003–.004 | .004–.005 | .004–.006 | .004–.006 |
| 2 | 30 | 30 | 100 | IPR | .000–.001 | .001–.001 | .001–.002 | .001–.002 | .002–.003 | .002–.004 | .003–.004 | .003–.004 | .004–.005 | .004–.006 | |
| | ||||||||||||||
| Kesme hızı | Metrik | ||||||||||||||
| Aralık | Çap başına önerilen ilerleme oranı (f) | ||||||||||||||
| Malzeme grubu | Min. | Başlangıç değeri | Maks. | 1,0 | 2,0 | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 0 | 70 | 100 | 140 | mm/dev | 0,03 | 0,04 | 0,05 | 0,08 | 0,09 | 0,11 | 0,13 | 0,15 | 0,19 | 0,24 |
| 1 | 70 | 100 | 140 | mm/dev | 0,04 | 0,05 | 0,07 | 0,08 | 0,11 | 0,13 | 0,15 | 0,18 | 0,22 | 0,28 | |
| 2 | 90 | 120 | 140 | mm/dev | 0,04 | 0,05 | 0,07 | 0,08 | 0,12 | 0,14 | 0,17 | 0,20 | 0,24 | 0,31 | |
| 3 | 60 | 80 | 100 | mm/dev | 0,05 | 0,06 | 0,08 | 0,09 | 0,13 | 0,15 | 0,19 | 0,22 | 0,26 | 0,34 | |
| 4 | 50 | 80 | 100 | mm/dev | 0,05 | 0,06 | 0,07 | 0,08 | 0,12 | 0,14 | 0,17 | 0,19 | 0,23 | 0,29 | |
| 5 | 40 | 50 | 70 | mm/dev | 0,03 | 0,04 | 0,05 | 0,06 | 0,08 | 0,10 | 0,12 | 0,14 | 0,18 | 0,23 | |
| 6 | 40 | 50 | 70 | mm/dev | 0,03 | 0,04 | 0,05 | 0,06 | 0,08 | 0,10 | 0,13 | 0,14 | 0,18 | 0,23 | |
| M | 1 | 20 | 30 | 40 | mm/dev | 0,02 | 0,03 | 0,04 | 0,05 | 0,08 | 0,09 | 0,10 | 0,12 | 0,14 | 0,16 |
| 2 | 30 | 40 | 50 | mm/dev | 0,02 | 0,03 | 0,04 | 0,06 | 0,08 | 0,09 | 0,10 | 0,12 | 0,14 | 0,16 | |
| 3 | 20 | 30 | 40 | mm/dev | 0,02 | 0,03 | 0,04 | 0,05 | 0,08 | 0,09 | 0,10 | 0,12 | 0,14 | 0,16 | |
| K | 1 | 80 | 120 | 170 | mm/dev | 0,08 | 0,09 | 0,11 | 0,12 | 0,16 | 0,20 | 0,23 | 0,25 | 0,31 | 0,38 |
| 2 | 80 | 110 | 140 | mm/dev | 0,10 | 0,11 | 0,12 | 0,13 | 0,16 | 0,20 | 0,23 | 0,25 | 0,31 | 0,38 | |
| 3 | 80 | 100 | 130 | mm/dev | 0,05 | 0,07 | 0,08 | 0,09 | 0,12 | 0,14 | 0,17 | 0,19 | 0,24 | 0,30 | |
| N | 1 | 90 | 230 | 315 | mm/dev | 0,05 | 0,06 | 0,08 | 0,10 | 0,12 | 0,16 | 0,20 | 0,24 | 0,28 | 0,32 |
| 2 | 90 | 225 | 270 | mm/dev | 0,04 | 0,06 | 0,08 | 0,10 | 0,12 | 0,16 | 0,20 | 0,24 | 0,28 | 0,32 | |
| 3 | 90 | 180 | 270 | mm/dev | 0,10 | 0,11 | 0,12 | 0,13 | 0,14 | 0,16 | 0,20 | 0,24 | 0,28 | 0,32 | |
| 4 | 90 | 135 | 180 | mm/dev | 0,04 | 0,06 | 0,08 | 0,10 | 0,12 | 0,16 | 0,20 | 0,24 | 0,28 | 0,32 | |
| S | 1 | 10 | 25 | 30 | mm/dev | 0,01 | 0,02 | 0,03 | 0,04 | 0,06 | 0,08 | 0,09 | 0,10 | 0,12 | 0,14 |
| 2 | 10 | 20 | 25 | mm/dev | 0,01 | 0,02 | 0,02 | 0,03 | 0,05 | 0,07 | 0,08 | 0,09 | 0,10 | 0,11 | |
| 3 | 10 | 25 | 30 | mm/dev | 0,01 | 0,02 | 0,02 | 0,02 | 0,04 | 0,06 | 0,07 | 0,08 | 0,09 | 0,10 | |
| 4 | 10 | 25 | 40 | mm/dev | 0,01 | 0,02 | 0,02 | 0,03 | 0,05 | 0,07 | 0,08 | 0,09 | 0,10 | 0,11 | |
| H | 1 | 10 | 15 | 30 | mm/dev | 0,01 | 0,02 | 0,02 | 0,03 | 0,05 | 0,07 | 0,08 | 0,09 | 0,10 | 0,11 |
| 2 | 10 | 10 | 30 | mm/dev | 0,01 | 0,02 | 0,02 | 0,02 | 0,04 | 0,06 | 0,07 | 0,08 | 0,09 | 0,10 | |
| Tolerans • İnç | ||
| Anma ölçüsü aralığı | D1 Tolerans | D Tolerans h6 |
| .0394–.1181 | .0000/-.0006 (h8) | .0000/-.0002 |
| .0000/-.0005 (h7) | .0000/-.0003 | |
| .0000/-.0006 (h7) | .0000/-.0004 | |
| .0000/-.0007 (h7) | .0000/-.0004 | |
| .0000/-.0008 (h7) | .0000/-.0005 | |
| Tolerans • Metrik | ||
| Anma ölçüsü aralığı | D1 Tolerans | D Tolerans h6 |
| 1–3 | 0,000/-0,014 (h8) | 0,000/-0,006 |
| 0,000/-0,012 (h7) | 0,000/-0,008 | |
| 0,000/-0,015 (h7) | 0,000/-0,009 | |
| 0,000/-0,018 (h7) | 0,000/-0,011 | |
| 0,000/-0,021 (h7) | 0,000/-0,013 | |
| mm | KISA TİP* | UZUN TİP* | EKSTRA UZUN** | |||||||||
| Ø | DIN 6535 | ~3 x D | ~5 x D | ~8 x D | ||||||||
| D1 min | D1 maks | D | LS min | L | L3 | L4 | L | L3 | L4 | L | L3 | L4 |
| 1,000 | 1,400 | 4 | 28 | 58 | 7 | 5 | 58 | 9 | 6 | 58 | 12 | 10 |
| 1,401 | 1,900 | 4 | 28 | 58 | 9 | 6 | 58 | 12 | 9 | 58 | 18 | 15 |
| 1,901 | 2,300 | 4 | 28 | 58 | 13 | 9 | 58 | 18 | 14 | 66 | 26 | 22 |
| 2,301 | 2,990 | 4 | 28 | 58 | 17 | 12 | 58 | 22 | 17 | 66 | 30 | 25 |
| 3,000 | 3,750 | 6 | 36 | 62 | 20 | 14 | 66 | 28 | 23 | 78 | 40 | 33 |
| 3,751 | 4,750 | 6 | 36 | 66 | 24 | 17 | 74 | 36 | 29 | 87 | 49 | 41 |
| 4,751 | 6,000 | 6 | 36 | 66 | 28 | 20 | 82 | 44 | 35 | 94 | 56 | 48 |
| 6,001 | 7,000 | 8 | 36 | 79 | 34 | 24 | 91 | 53 | 43 | 105 | 67 | 57 |
| 7,001 | 8,000 | 8 | 36 | 79 | 41 | 29 | 91 | 53 | 43 | 110 | 72 | 61 |
| 8,001 | 10,000 | 10 | 40 | 89 | 47 | 35 | 103 | 61 | 49 | 122 | 80 | 68 |
| 10,001 | 12,000 | 12 | 45 | 102 | 55 | 40 | 118 | 71 | 56 | 141 | 94 | 79 |
| 12,001 | 14,000 | 14 | 45 | 107 | 60 | 43 | 124 | 77 | 60 | 155 | 108 | 91 |
| 14,001 | 16,000 | 16 | 48 | 115 | 65 | 45 | 133 | 83 | 63 | 171 | 121 | 101 |
| 16,001 | 18,000 | 18 | 48 | 123 | 73 | 51 | 143 | 93 | 71 | 185 | 135 | 113 |
| 18,001 | 20,000 | 20 | 50 | 131 | 79 | 55 | 153 | 101 | 77 | 200 | 148 | 124 |
| 20,001 | 22,000 | 20 | 50 | 141 | 86 | 60 | 167 | 112 | 85 | 217 | 162 | 136 |
| 22,001 | 25,000 | 25 | 56 | 153 | 95 | 65 | 184 | 126 | 98 | 238 | 180 | 150 |
| * D1 20 mm, DIN 6537K standardına göre | ||||||||||||
| * D1 | ||||||||||||
| ** Fabrika standardına göre | ||||||||||||
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
ISO Katalog Numarası
ANSI Katalog Numarası
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | ISO Katalog Numarası | Kalite |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?