Benzer Ürün:
KVNS™ A2™ • Arbor Mount • Metric
Slot milling cutter for multiple materials
Ürün Numarası1246131
ISO Katalog No4.97101116ANSI Catalog No4.97101116
- P Steel
- M Stainless Steel
- K Cast Iron
- N Non-Ferrous
- S High-Temp Alloys
- Slotting: Side with AE/AP dimensions
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
- Genel Bakış
- Uygulama bilgisi
- İndirilenler
- Uyumlu Parçalar Makine Tarafı
- Uyumlu Parçalar İş Parçası Tarafı
- Yedek Parçalar
- Yorum
- Soru&Cevap
Ürün Numarası | 1246131 |
ISO Katalog No | 4.97101116 |
ANSI Catalog No | 4.97101116 |
[BM] Cutting Width Minimum | 1.6 mm |
[BM] Cutting Width Minimum | .063 in |
[D1] Effective Cutting Diameter | 100 mm |
[D1] Effective Cutting Diameter | 3.937 in |
[CDX] Radial Maximum Depth of Cut | 27 mm |
[CDX] Radial Maximum Depth of Cut | 1.063 in |
[D] Adapter / Shank / Bore Diameter | 22 mm |
[D] Adapter / Shank / Bore Diameter | .8661 in |
[THUB] Hub Thickness | 1.3 mm |
[THUB] Hub Thickness | .0512 in |
Number of Inserts | 9 |
Weight Kilograms | 0.06 |
Gage Insert | 3.90016____ |
Max RPM | 3200 |
İş Parçası Malzemeleri
- Steel
- Stainless Steel
- Cast Iron
- Non-Ferrous
- High-Temp Alloys
Kullanım ve uygulama alanları
- Slotting: Side with AE/AP dimensions
Özellikler ve avantajlar
- Self-clamping insert seat with fixed stop.
- Excellent for all flat-bottom slotting and cut-off operations.
- Two drive rings required for each cutter body. They must be ordered separately, and in pairs of two.
- For cutter diameters 200mm and 250mm support rings are optional (instead of drive rings). Support rings also must be ordered separately, and in pairs of two.
İlerleme ve Devir hesaplamak için Çözüm Oluşturun
Bir çözüm oluşturduktan sonra, sadece İlerleme ve Devir simgesini seçin ve sistemimiz öneriler sunacaktır. Makinenizi ve teknik özelliklerinizi ekleyerek bilgileri özelleştirebilir veya kaydırıcıları kullanarak ayarlamalar yapabilirsiniz.
Uç Seçimi
Kesici uç seçme rehberi
KVNS™ A2™ Slotting Cutters • Insert Selection Guide | ||||||
Malzeme grubu | Hafif işleme | Genel amaçlı kullanım | Ağır işleme | |||
– | (Hafif geometri) | (Sert geometri) | ||||
– | Aşınma direnci | Tokluk | ||||
– | Geometri | Kalite | Geometri | Kalite | Geometri | Kalite |
P1-P2 | .S..GD | KCPK30 | .S..GD | KCPK30 | .S..GB | KCPK30 |
P3-P4 | .S..GD | KCPK30 | .S..GD | KCPK30 | .S..GB | KCPK30 |
P5-P6 | .S..GD | KCPK30 | .S..GB | KCPK30 | .S..GB | KCPK30 |
M1-M2 | .S..GD | KCPK30 | .S..GD | KCPK30 | .S..GB | KCPK30 |
M3 | .S..GD | KCPK30 | .S..GB | KCPK30 | .S..GB | KCPK30 |
K1-K2 | .S..GD | KCPK30 | .S..GD | KCPK30 | .S..GB | KCPK30 |
K3 | .S..GD | KCPK30 | .S..GD | KCPK30 | .S..GB | KCPK30 |
N1-N2 | – | – | – | – | – | – |
N3 | – | – | – | – | – | – |
S1-S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | – | – | – | – | – | – |
H1 | – | – | – | – | – | – |
İlerlemeler
Önerilen başlangıç ilerlemeleri [mm]
KVNS™ A2™ Series • Recommended Starting Feeds [mm/th] | |||||||||||||||
Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | |||||||||||
L | M | H | L | M | H | L | M | H | L | M | H | L | M | H | |
.S..GD | 0,23 | 0,46 | 0,71 | 0,17 | 0,33 | 0,51 | 0,13 | 0,25 | 0,38 | 0,11 | 0,22 | 0,33 | 0,10 | 0,20 | 0,30 |
.S..GB | 0,23 | 0,46 | 0,74 | 0,17 | 0,33 | 0,54 | 0,13 | 0,25 | 0,40 | 0,11 | 0,22 | 0,35 | 0,10 | 0,20 | 0,32 |
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate. |
Recommended Starting Feeds [IPT]
KVNS™ A2™ Series • Recommended Starting Feeds [IPT] | |||||||||||||||
Kesici uç geometrisi | Frezenin iş parçasına radyal giriş temasında (ae), diş başına başlangıç ilerleme (Fz) % oranı. | ||||||||||||||
5% | 10% | 20% | 30% | 40–100% | |||||||||||
L | M | H | L | M | H | L | M | H | L | M | H | L | M | H | |
.S..GD | 0.009 | 0.017 | 0.026 | 0.007 | 0.013 | 0.019 | 0.005 | 0.009 | 0.014 | 0.004 | 0.008 | 0.012 | 0.004 | 0.008 | 0.011 |
.S..GB | 0.009 | 0.017 | 0.028 | 0.007 | 0.013 | 0.020 | 0.005 | 0.009 | 0.015 | 0.004 | 0.008 | 0.013 | 0.004 | 0.008 | 0.012 |
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate. |
Hızlar
Önerilen Başlangıç Hızları [m/dak]
KVNS™ A2™ Series • Recommended Starting Speed [m/min] | |||||||
Kalite | KCPK30 | KMF | |||||
Talaş kalınlığı hex mm | Min. | Maks. | Min. | Maks. | |||
Malzeme grubu | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | |
P | 1 | 455 | 395 | 370 | – | – | – |
2 | 280 | 255 | 230 | – | – | – | |
3 | 255 | 230 | 205 | – | – | – | |
4 | 225 | 185 | 160 | – | – | – | |
5 | 190 | 170 | 150 | – | – | – | |
6 | 160 | 135 | 110 | – | – | – | |
M | 1 | 205 | 185 | 155 | – | – | – |
2 | 185 | 160 | 140 | – | – | – | |
3 | 145 | 130 | 115 | – | – | – | |
K | 1 | 295 | 265 | 240 | – | – | – |
2 | 235 | 210 | 190 | – | – | – | |
3 | 195 | 175 | 160 | – | – | – | |
N | 1 | – | – | – | 335 | 298 | 271 |
2 | – | – | – | 335 | 298 | 271 | |
3 | – | – | – | 219 | 198 | 170 | |
S | 1 | – | – | – | 30 | 24 | 20 |
2 | – | – | – | 30 | 24 | 20 | |
3 | – | – | – | 30 | 24 | 20 | |
4 | 50 | 45 | 35 | 24 | 24 | 24 | |
H | 1 | – | – | – | – | – | – |
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. |
Recommended Starting Speeds [SFM]
KVNS™ A2™ Series • Recommended Starting Speed [SFM] | |||||||
Kalite | KCPK30 | KMF | |||||
Chip Thickness hex Inch | Min. | Maks. | Min. | Maks. | |||
Malzeme grubu | Maks. | Başlangıç | Min. | Maks. | Başlangıç | Min. | |
P | 1 | 1495 | 1295 | 1215 | – | – | – |
2 | 920 | 835 | 755 | – | – | – | |
3 | 835 | 755 | 675 | – | – | – | |
4 | 740 | 605 | 525 | – | – | – | |
5 | 625 | 560 | 490 | – | – | – | |
6 | 525 | 445 | 360 | – | – | – | |
M | 1 | 675 | 605 | 510 | – | – | – |
2 | 605 | 525 | 460 | – | – | – | |
3 | 475 | 425 | 375 | – | – | – | |
K | 1 | 970 | 870 | 785 | – | – | – |
2 | 770 | 690 | 625 | – | – | – | |
3 | 640 | 575 | 525 | – | – | – | |
N | 1 | – | – | – | 1100 | 980 | 890 |
2 | – | – | – | 1100 | 980 | 890 | |
3 | – | – | – | 720 | 650 | 560 | |
S | 1 | – | – | – | 100 | 80 | 65 |
2 | – | – | – | 100 | 80 | 65 | |
3 | – | – | – | 100 | 80 | 65 | |
4 | 165 | 150 | 115 | 80 | 80 | 80 | |
H | 1 | – | – | – | – | – | – |
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining. |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use