successfully added to cart
View Cart

Popular Categories

Browse All Clearance Center Products

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (378)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (368)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (368)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (369)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (373)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (349)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (338)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (325)
  • M Stainless Steel (321)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (321)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (295)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (308)
  • K Cast Iron (323)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (306)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (320)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (288)
  • N Non-Ferrous Materials (190)
    • N1
      Wrought Aluminum
      (186)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (185)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (136)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (176)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (160)
    • N6
      Carbon, Graphite Composites, CFRP
      (154)
    • N7
      MMC's
      (145)
  • S High-Temp Alloys (280)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (268)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (268)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (267)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (244)
  • H Hardened Materials (203)
    • H1
      Hardened Materials 44-48 HRC
      (203)
    • H2
      Hardened Materials 48-55 HRC
      (154)
    • H3
      Hardened Materials 56-60 HRC
      (147)
    • H4
      Hardened Materials >60 HRC
      (124)
Applications
  • Back Boring Back Boring (14)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (70)
  • Blind Hole Finishing Blind Hole Finishing (70)
  • Boring Boring (5)
  • CRT Boring CRT Boring (4)
  • CRT Profiling CRT Profiling (4)
  • Chamfer Milling Chamfer Milling (130)
  • Chamfer Turning Chamfer Turning (25)
  • Concave Radius Milling Concave Radius Milling (1)
  • Convex Drilling Convex Drilling (73)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (73)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (73)
  • Counterboring Counterboring (39)
  • Countersinking Countersinking (68)
  • Cross Hole Drilling Cross Hole Drilling (11)
  • Cut-Off Cut-Off (19)
  • Deep Grooving Deep Grooving (14)
  • Drilling Drilling (202)
  • Face Grooving Face Grooving (19)
  • Face Milling Face Milling (129)
  • Facing Facing (30)
  • Flat Bottom Drilling Flat Bottom Drilling (212)
  • Grooving Grooving (20)
  • ID Facing ID Facing (19)
  • ID Grooving ID Grooving (20)
  • ID Thread Turning ID Thread Turning (249)
  • Inclined Entry Drilling Inclined Entry Drilling (39)
  • Inclined Exit Drilling Inclined Exit Drilling (39)
  • Multiple Direction Cutting Multiple Direction Cutting (81)
  • OD Thread Turning OD Thread Turning (22)
  • Pipe Thread Pipe Thread (259)
  • Plunge Turning Plunge Turning (30)
  • Pocket Pocket (137)
  • Pocket Helical Pocket Helical (137)
  • Pocket Milling Pocket Milling (137)
  • Pocket Plunge Milling Pocket Plunge Milling (126)
  • Pre-Condition Pre-Condition (201)
  • Profile Milling Profile Milling (125)
  • Profiling Profiling (49)
  • Ramping Ramping (139)
  • Shoulder Ball Nose Shoulder Ball Nose (125)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (125)
  • Shoulder Milling Shoulder Milling (131)
  • Shoulder Roughing Shoulder Roughing (126)
  • Shoulder Square End Shoulder Square End (119)
  • Slot Ball Nose Slot Ball Nose (125)
  • Slot Milling Slot Milling (126)
  • Slot Side Slot Side (125)
  • Slot Square End Slot Square End (125)
  • Slot T Slot T (125)
  • Stacked Plates Drilling Stacked Plates Drilling (39)
  • TRN Boring TRN Boring (19)
  • Tapping Blind Hole Tapping Blind Hole (120)
  • Tapping Through Hole Tapping Through Hole (120)
  • Thread Milling Thread Milling (125)
  • Threading Threading (273)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (70)
  • Through Hole Finishing Through Hole Finishing (70)
  • Turning Turning (40)
  • X-Offset Drilling X-Offset Drilling (73)
Cutting Diameter
  • 0.397 (2)
  • 0.4 (1)
  • 0.5 (1)
  • 0.794 (1)
  • 1.4 (1)
  • 1.984 (2)
  • 2.0 (1)
  • 2.381 (4)
  • 2.439 (1)
  • 2.778 (1)
  • 2.779 (1)
  • 2.947 (1)
  • 3.0 (3)
  • 3.17 (1)
  • 3.175 (2)
  • 3.264 (1)
  • 3.455 (1)
  • 3.734 (1)
  • 3.8 (1)
  • 3.969 (1)
  • 3.97 (1)
  • 4.0 (4)
  • 4.09 (1)
  • 4.1 (1)
  • 4.2 (1)
  • 4.217 (1)
  • 4.366 (1)
  • 4.7 (1)
  • 4.76 (1)
  • 4.763 (3)
  • 4.78 (1)
  • 4.9 (1)
  • 5.0 (4)
  • 5.5 (1)
  • 5.556 (3)
  • 5.56 (1)
  • 5.573 (1)
  • 5.6 (1)
  • 5.8 (2)
  • 5.954 (1)
  • 6.0 (5)
  • 6.2 (1)
  • 6.35 (9)
  • 6.5 (2)
  • 6.6 (1)
  • 6.7 (2)
  • 7.14 (1)
  • 7.5 (1)
  • 7.54 (1)
  • 7.541 (1)
  • 7.938 (6)
  • 8.0 (7)
  • 8.3 (1)
  • 8.7 (2)
  • 8.73 (1)
  • 8.8 (2)
  • 9.0 (1)
  • 9.2 (1)
  • 9.525 (14)
  • 9.7 (1)
  • 9.703 (1)
  • 9.804 (1)
  • 10.0 (10)
  • 10.1 (2)
  • 10.5 (1)
  • 10.7 (2)
  • 10.716 (1)
  • 10.8 (1)
  • 11.0 (1)
  • 11.5 (1)
  • 11.61 (1)
  • 12.0 (5)
  • 12.304 (1)
  • 12.4 (1)
  • 12.5 (1)
  • 12.7 (7)
  • 13.0 (2)
  • 13.3 (1)
  • 13.5 (1)
  • 13.9 (1)
  • 14.0 (1)
  • 14.2 (1)
  • 14.666 (1)
  • 14.684 (1)
  • 14.7 (2)
  • 14.854 (1)
  • 15.0 (1)
  • 15.083 (1)
  • 15.3 (1)
  • 15.7 (1)
  • 15.875 (3)
  • 16.0 (2)
  • 17.0 (1)
  • 17.7 (2)
  • 18.0 (1)
  • 18.39 (1)
  • 18.7 (1)
  • 19.05 (4)
  • 19.5 (1)
  • 20.0 (5)
  • 22.06 (1)
  • 22.225 (2)
  • 22.44 (1)
  • 24.0 (2)
  • 24.5 (2)
  • 24.608 (2)
  • 24.7 (1)
  • 25.0 (1)
  • 25.07 (1)
  • 25.4 (3)
  • 26.0 (1)
  • 26.187 (1)
  • 26.19 (1)
  • 26.5 (1)
  • 26.59 (2)
  • 30.163 (1)
  • 31.75 (1)
  • 32.0 (1)
  • 32.2 (1)
  • 32.34 (1)
  • 32.5 (1)
  • 32.54 (1)
  • 32.78 (1)
  • 32.94 (1)
  • 33.0 (2)
  • 33.34 (1)
  • 33.4 (1)
  • 33.5 (1)
  • 33.73 (1)
  • 34.0 (1)
  • 34.13 (1)
  • 34.5 (1)
  • 34.925 (1)
  • 34.93 (1)
  • 35.0 (1)
  • 35.5 (1)
  • 35.72 (1)
  • 36.0 (1)
  • 38.1 (2)
  • 40.0 (1)
  • 41.0 (1)
  • 45.0 (1)
  • 45.45 (1)
  • 50.8 (1)
  • 58.13 (1)
  • 67.3 (1)
  • 76.2 (3)
  • 76.51 (1)
  • 80.0 (2)
  • 100.0 (1)
  • 101.6 (2)
  • 160.0 (2)
  • 203.2 (1)
  • 304.8 (1)
to
Cutting Diameter
  • 0.0156 (2)
  • 0.0157 (1)
  • 0.0197 (1)
  • 0.0313 (1)
  • 0.0551 (1)
  • 0.0781 (2)
  • 0.0787 (1)
  • 0.0938 (4)
  • 0.096 (1)
  • 0.1094 (2)
  • 0.116 (1)
  • 0.1181 (3)
  • 0.1248 (1)
  • 0.125 (2)
  • 0.1285 (1)
  • 0.136 (1)
  • 0.147 (1)
  • 0.1496 (1)
  • 0.1563 (2)
  • 0.1575 (4)
  • 0.161 (1)
  • 0.1614 (1)
  • 0.1654 (1)
  • 0.166 (1)
  • 0.1719 (1)
  • 0.185 (1)
  • 0.1874 (1)
  • 0.1875 (3)
  • 0.188 (1)
  • 0.1929 (1)
  • 0.1969 (4)
  • 0.2165 (1)
  • 0.2188 (3)
  • 0.2189 (1)
  • 0.2194 (1)
  • 0.2205 (1)
  • 0.2283 (2)
  • 0.2344 (1)
  • 0.2362 (5)
  • 0.2441 (1)
  • 0.25 (9)
  • 0.2559 (2)
  • 0.2598 (1)
  • 0.2638 (2)
  • 0.2811 (1)
  • 0.2953 (1)
  • 0.2969 (2)
  • 0.3125 (6)
  • 0.315 (7)
  • 0.3268 (1)
  • 0.3425 (2)
  • 0.3437 (1)
  • 0.3465 (2)
  • 0.3543 (1)
  • 0.3622 (1)
  • 0.375 (14)
  • 0.3819 (1)
  • 0.382 (1)
  • 0.386 (1)
  • 0.3937 (10)
  • 0.3976 (2)
  • 0.4134 (1)
  • 0.4213 (2)
  • 0.4219 (1)
  • 0.4252 (1)
  • 0.4331 (1)
  • 0.4528 (1)
  • 0.4571 (1)
  • 0.4724 (5)
  • 0.4844 (1)
  • 0.4882 (1)
  • 0.4921 (1)
  • 0.5 (7)
  • 0.5118 (2)
  • 0.5236 (1)
  • 0.5315 (1)
  • 0.5472 (1)
  • 0.551 (1)
  • 0.5591 (1)
  • 0.5774 (1)
  • 0.5781 (1)
  • 0.5787 (2)
  • 0.5848 (1)
  • 0.5906 (1)
  • 0.5938 (1)
  • 0.602 (1)
  • 0.6181 (1)
  • 0.625 (3)
  • 0.63 (2)
  • 0.6693 (1)
  • 0.6969 (2)
  • 0.7087 (1)
  • 0.724 (1)
  • 0.7362 (1)
  • 0.75 (4)
  • 0.7677 (1)
  • 0.787 (1)
  • 0.7874 (4)
  • 0.869 (1)
  • 0.875 (2)
  • 0.8835 (1)
  • 0.9449 (2)
  • 0.9646 (2)
  • 0.9688 (2)
  • 0.9724 (1)
  • 0.984 (1)
  • 0.987 (1)
  • 1.0 (3)
  • 1.0236 (1)
  • 1.031 (1)
  • 1.0311 (1)
  • 1.0433 (1)
  • 1.0469 (1)
  • 1.047 (1)
  • 1.1875 (1)
  • 1.25 (1)
  • 1.26 (1)
  • 1.2677 (1)
  • 1.2732 (1)
  • 1.2795 (1)
  • 1.281 (1)
  • 1.2811 (1)
  • 1.291 (1)
  • 1.297 (1)
  • 1.2992 (2)
  • 1.313 (1)
  • 1.3189 (1)
  • 1.328 (1)
  • 1.3386 (1)
  • 1.344 (1)
  • 1.3583 (1)
  • 1.375 (2)
  • 1.378 (1)
  • 1.3976 (1)
  • 1.406 (1)
  • 1.4173 (1)
  • 1.5 (2)
  • 1.5748 (1)
  • 1.6142 (1)
  • 1.7717 (1)
  • 1.789 (1)
  • 2.0 (1)
  • 2.289 (1)
  • 2.65 (1)
  • 3.0 (3)
  • 3.012 (1)
  • 3.15 (2)
  • 3.937 (1)
  • 4.0 (2)
  • 6.299 (1)
  • 6.2992 (1)
  • 8.0 (1)
  • 12.0 (1)
to
Cutting Length
  • 0.0276 (1)
  • 0.0312 (1)
  • 0.0313 (1)
  • 0.0315 (1)
  • 0.059 (1)
  • 0.0591 (1)
  • 0.0781 (1)
  • 0.0827 (1)
  • 0.084 (3)
  • 0.098 (1)
  • 0.1181 (2)
  • 0.1378 (2)
  • 0.1575 (1)
  • 0.1875 (3)
  • 0.1969 (4)
  • 0.197 (1)
  • 0.2 (1)
  • 0.236 (1)
  • 0.2362 (3)
  • 0.295 (1)
  • 0.2969 (1)
  • 0.3 (1)
  • 0.3125 (2)
  • 0.313 (2)
  • 0.315 (2)
  • 0.326 (1)
  • 0.3281 (1)
  • 0.335 (1)
  • 0.3543 (3)
  • 0.375 (14)
  • 0.377 (1)
  • 0.38 (11)
  • 0.39 (2)
  • 0.3937 (2)
  • 0.394 (1)
  • 0.4 (1)
  • 0.43 (1)
  • 0.433 (4)
  • 0.4331 (1)
  • 0.4375 (1)
  • 0.438 (1)
  • 0.44 (1)
  • 0.451 (1)
  • 0.4724 (2)
  • 0.484 (1)
  • 0.49 (2)
  • 0.5 (18)
  • 0.51 (5)
  • 0.5118 (3)
  • 0.512 (4)
  • 0.531 (1)
  • 0.56 (1)
  • 0.5625 (1)
  • 0.563 (1)
  • 0.58 (1)
  • 0.59 (1)
  • 0.5906 (2)
  • 0.591 (1)
  • 0.61 (8)
  • 0.62 (1)
  • 0.625 (9)
  • 0.6299 (3)
  • 0.63 (4)
  • 0.67 (1)
  • 0.68 (1)
  • 0.6875 (1)
  • 0.688 (3)
  • 0.7087 (2)
  • 0.709 (1)
  • 0.71 (1)
  • 0.745 (2)
  • 0.748 (2)
  • 0.75 (10)
  • 0.76 (1)
  • 0.77 (1)
  • 0.7874 (3)
  • 0.79 (1)
  • 0.8125 (1)
  • 0.83 (1)
  • 0.8661 (4)
  • 0.875 (2)
  • 0.88 (2)
  • 0.91 (1)
  • 0.9375 (1)
  • 0.938 (3)
  • 0.945 (2)
  • 0.97 (2)
  • 0.984 (1)
  • 0.9843 (2)
  • 1.0 (7)
  • 1.0236 (2)
  • 1.0625 (1)
  • 1.063 (2)
  • 1.09 (2)
  • 1.12 (1)
  • 1.125 (6)
  • 1.1811 (1)
  • 1.22 (1)
  • 1.25 (2)
  • 1.2598 (2)
  • 1.26 (1)
  • 1.304 (1)
  • 1.375 (1)
  • 1.4173 (1)
  • 1.5 (4)
  • 1.5748 (1)
  • 1.75 (4)
  • 1.77 (1)
  • 2.0 (4)
  • 2.2 (1)
  • 2.25 (2)
  • 2.5625 (1)
to
Cutting Length
  • 0.7 (1)
  • 0.794 (2)
  • 0.8 (1)
  • 1.5 (2)
  • 1.984 (1)
  • 2.1 (1)
  • 2.13 (3)
  • 2.5 (1)
  • 3.0 (2)
  • 3.5 (2)
  • 4.0 (1)
  • 4.763 (3)
  • 5.0 (5)
  • 5.08 (1)
  • 6.0 (4)
  • 7.493 (1)
  • 7.541 (1)
  • 7.6 (1)
  • 7.938 (2)
  • 7.95 (2)
  • 8.0 (2)
  • 8.3 (1)
  • 8.334 (1)
  • 8.509 (1)
  • 9.0 (3)
  • 9.5 (1)
  • 9.525 (13)
  • 9.59 (1)
  • 9.652 (2)
  • 9.7 (9)
  • 9.9 (2)
  • 10.0 (4)
  • 10.998 (1)
  • 11.0 (5)
  • 11.1 (1)
  • 11.112 (1)
  • 11.125 (1)
  • 11.44 (1)
  • 12.0 (2)
  • 12.29 (1)
  • 12.4 (1)
  • 12.5 (1)
  • 12.7 (18)
  • 12.9 (3)
  • 13.0 (7)
  • 13.005 (2)
  • 13.487 (1)
  • 14.288 (1)
  • 14.3 (2)
  • 14.8 (1)
  • 15.0 (3)
  • 15.1 (1)
  • 15.4 (5)
  • 15.49 (1)
  • 15.6 (2)
  • 15.8 (1)
  • 15.875 (9)
  • 16.0 (6)
  • 16.002 (1)
  • 17.1 (1)
  • 17.3 (1)
  • 17.463 (1)
  • 17.47 (1)
  • 17.475 (2)
  • 18.0 (4)
  • 18.923 (2)
  • 18.999 (1)
  • 19.0 (1)
  • 19.05 (10)
  • 19.4 (1)
  • 19.6 (1)
  • 20.0 (4)
  • 20.638 (1)
  • 21.0 (1)
  • 22.0 (4)
  • 22.225 (2)
  • 22.4 (2)
  • 23.1 (1)
  • 23.813 (1)
  • 23.825 (3)
  • 24.0 (1)
  • 24.003 (1)
  • 24.6 (2)
  • 24.994 (1)
  • 25.0 (2)
  • 25.4 (7)
  • 26.0 (2)
  • 26.988 (1)
  • 27.0 (2)
  • 27.6 (1)
  • 27.7 (1)
  • 28.575 (6)
  • 28.6 (1)
  • 30.0 (1)
  • 31.0 (1)
  • 31.75 (2)
  • 32.0 (4)
  • 33.0 (1)
  • 34.925 (1)
  • 36.0 (1)
  • 38.1 (4)
  • 40.0 (1)
  • 44.45 (4)
  • 44.96 (1)
  • 50.8 (4)
  • 55.88 (1)
  • 57.15 (2)
  • 65.088 (1)
to
Type of Thread
  • 55 (1)
  • 60 (1)
  • ACME (3)
  • API (3)
  • API BUTTRESS (1)
  • API RD (2)
  • BSW (1)
  • M (1)
  • RD DIN 405 (1)
  • STUB ACME (1)
  • TR DIN 103 (1)
  • UN (3)
  • UNJ (1)
Cutting Condition
  • Heavily Interrupted Cut (153)
  • Interrupted (22)
  • Lightly Interrupted Cut (155)
  • Smooth Cut (200)
  • Varying Depth of Cut (147)
Maximum Hole Depth [L4]
  • 0.5512 (2)
  • 0.669 (2)
  • 0.6693 (1)
  • 0.6772 (1)
  • 0.787 (2)
  • 0.906 (1)
  • 0.945 (3)
  • 0.984 (1)
  • 1.0197 (1)
  • 1.1417 (2)
  • 1.142 (3)
  • 1.181 (1)
  • 1.2992 (1)
  • 1.374 (1)
  • 1.378 (12)
  • 1.4173 (1)
  • 1.5748 (1)
  • 1.575 (3)
  • 1.5866 (1)