Highly Flexible Modular Boring System

One system includes highly flexible roughing and fine-boring heads to large bridge tooling with optimum amount of tooling components. 

This premium boring line enables roughing to fine-boring operations using one system with a large diameter range from 9,75–2,205mm (.384–86.8"). The ModBORE system can be used in most workpiece materials in metalcutting applications along with the latest Kennametal standard ISO turning inserts. 

Complete System

  • Twin blade heads for roughing to semi-finishing operations starting from diameter 23,5mm (.925").
  • Fine-boring heads for finishing in diameters 9,75–2,205mm (.384–86.8").
  • Bridge tooling for large diameters up to 2,205mm (86.8") standard with both roughing and fine-finishing heads.
  • Through-coolant capability in all styles.

Resolution

  • Fine adjustable roughing heads. 
  • 0,01mm (.0004") diameter adjustment respective 2 μm (.00008") with easy-to-read large vernier scale with fine-boring heads.

Product Variety

  • KM™ shanks for use in all spindles with compatible adaptors.
  • HSK shanks for use without adaptors.
  • Inch shanks are most economical to use with compatible adaptors.

Based on KM™, HSK, and inch SSF couplings, match all spindle specifications direct or indirect via adaptors. The ModBORE fine-boring system uses standard ISO/ANSI turning inserts for maximum performance and flexibility.

RBHT • Twin Cutters for Rough and Semi-Finish Boring 

  • Diameters 23,5–153mm (.925–6.024").
  • KM, HSK, and inch straight shank back end versions available.
  • Preloaded serration and ground support face for stable connection, minimal vibration, and maximum accuracy, with easy diameter adjustment.
  • Large selection of blades sets:
    -Staggered - efficient machining of large depths of cut.
    -70° - for challenging applications requiring stable corner radii and full use of inserts.
    -90° - most precise machining results.
  • Generous clearance and through coolant enable free chip flow and improved tool life.
  • All toolholders accept positive standard inserts. Toolholders in diameter 65,5mm (2.58") and greater for negative standard inserts.

FBHM • Offset Boring Bar and Cartridge Heads for Fine Finishing 

  • Diameters 9,75–320mm (.384–12.59"). 
  • KM-TS™, HSK, CV, DV, and BT steep taper back end styles available.
  • Precision-ground micrometric screw enables fi ne adjustment of 2 μm (.00008"). Large TiN-coated dial is easy to adjust and read.
  • Standard steel and carbide boring bars adjust in length for maximum stability.
  • Aluminium diameter extender with insert cartridges and counterweight used for diameters starting at 86mm (3.38") for maximum fl exibility.
  • Through coolant at the cutting edge improves tool life, surface fi nish, and chip evacuation.

FBHO • Offset Boring Bar Heads for Fine Finishing 

  • Diameters 9,75–88,1mm (.384–3.46").
  • KM™, HSK, and inch straight shank back end styles available.
  • Precision-ground micrometric screw enables fi ne adjustment of 2 μm (.00008") via easy-to-read vernier scale.
  • Standard steel and carbide boring bars can be adjusted in length for maximum stability.
  • Through coolant at the cutting edge improves tool life, surface fi nish, and chip evacuation.

FBHS • Cartridge Boring Heads for Fine Finishing 

  • Diameters 23,5–153mm (.925–6.024").
  • KM, HSK, and inch straight shank back end styles available.
  • Precision-ground micrometric screw enables fi ne adjustment of 2 μm (.00008") via easy-to-read vernier scale.
  • Large selection of insert holders:
    -95° - for use with wiper turning inserts.
    -90° regular diameter - for efficient machining in large depths of cut.
    -90° oversized diameter - for enhanced boring head diameter capabilities.
  •   Generous clearance and through coolant at the cutting edge improve tool life, surface fi nish, and chip evacuation.

BT • Bridge Tools for Rough and Finish Boring 

  • Diameters 150–2,205mm (5.91–86.81"). 
  • Sophisticated ground serration and T-style bolt clamping provide high cutting forces, and prevent diameter changes when heads are clamped.
  • Only 10 bridge consoles are needed for diameters up to 655mm (25.7").
  • KM, HSK, and some steep taper adaptors with ground serration available as standard. Through coolant at the cutting edge improves tool life and surface fi nish.
  • Diameters 650–2,205mm (25.5–86.81") covered by three aluminium-based consoles and two sets of steel slides for mounting rough and fi nish boring heads.
  • 90° roughing head sets ensure precise height alignment, and negative standard inserts enable high metal removal rates.
  • Counterweight for better balancing and fi ne-boring head with precision-ground micrometric screw for adjustments of 2 μm (.00008").

Browse ModBORE Products

Select Filters
Filters
View filters in
Metric
Inch
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?