Tool Holders

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (6)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (6)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (6)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (6)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (6)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (6)
  • M Stainless Steel (6)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (6)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (6)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (6)
  • K Cast Iron (6)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (6)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (6)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (6)
  • N Non-Ferrous Materials (4)
    • N1
      Wrought Aluminum
      (4)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (4)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (4)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (4)
    • N6
      Carbon, Graphite Composites, CFRP
      (3)
    • N7
      MMC's
      (4)
  • S High-Temp Alloys (6)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (6)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (6)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (6)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (6)
  • H Hardened Materials (2)
    • H1
      Hardened Materials 44-48 HRC
      (2)
    • H2
      Hardened Materials 48-55 HRC
      (2)
    • H3
      Hardened Materials 56-60 HRC
      (2)
    • H4
      Hardened Materials >60 HRC
      (1)
Applications
Applications
  • Facing Facing (6)
  • Multiple Direction Cutting Multiple Direction Cutting (3)
  • Profiling Profiling (3)
  • Turning Turning (6)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (6)
  • Interrupted (3)
  • Lightly Interrupted Cut (6)
  • Smooth Cut (6)
  • Varying Depth of Cut (6)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 75.0 (3)
  • 90.0 (3)
  • 95.0 (1)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Cutoff Support Blade A1-A3 (1)
  • Toolholder (6)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (3)
  • 2.0 (1)
  • 4.0 (4)
  • 8.0 (3)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Corner configuration
Corner Radius
Corner Radius
  • 0.004 in (1)
  • 0.008 in (1)
  • 0.016 in (2)
  • 0.031 in (3)
  • 0.047 in (3)
  • 0.062 in (1)
  • 0.063 in (2)
  • 0.094 in (1)
  • 0.095 in (2)
  • 0.125 in (1)
  • 0.126 in (2)
  • 0.157 in (2)
  • 0.188 in (1)
  • 0.197 in (1)
  • 0.237 in (1)
  • 0.25 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (1)
  • 0.2 mm (1)
  • 0.4 mm (2)
  • 0.8 mm (3)
  • 1.201 mm (3)
  • 1.576 mm (1)
  • 1.6 mm (2)
  • 2.375 mm (1)
  • 2.401 mm (2)
  • 3.176 mm (1)
  • 3.2 mm (2)
  • 4.0 mm (2)
  • 4.775 mm (1)
  • 5.0 mm (1)
  • 6.0 mm (1)
  • 6.351 mm (1)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (1)
  • 241 (1)
  • CL4 (2)
  • CM2 (2)
  • CM3 (3)
  • CM4 (1)
  • CPX (2)
  • CW2 (1)
  • GX (2)
  • HT2 (1)
  • HTX (1)
  • K060 (1)
  • K090 (3)
  • K1 (3)
  • K10M (2)
  • K10P (2)
  • K10U (1)
  • K15U (1)
  • K20K (2)
  • K21 (2)
  • K25M (2)
  • K25P (3)
  • K313 (4)
  • K35P (1)
  • K420 (3)
  • K45 (1)
  • K68 (3)
  • KB1340 (1)
  • KB1345 (1)
  • KB1610 (1)
  • KB1625 (1)
  • KB1630 (1)
  • KB5610 (1)
  • KB5625 (1)
  • KB5630 (1)
  • KB9610 (1)
  • KB9640 (1)
  • KBH10 (1)
  • KBH10B (1)
  • KBH20 (1)
  • KBH20B (1)
  • KBK35 (1)
  • KC210 (2)
  • KC250 (2)
  • KC5010 (6)
  • KC5025 (3)
  • KC5410 (3)
  • KC5510 (3)
  • KC5525 (1)
  • KC710 (1)
  • KC720 (2)
  • KC722 (1)
  • KC725M (2)
  • KC730 (4)
  • KC7310 (4)
  • KC732 (3)
  • KC735M (1)
  • KC8050 (6)
  • KC810 (3)
  • KC850 (5)
  • KC9010 (3)
  • KC9025 (4)
  • KC910 (3)
  • KC9105 (1)
  • KC9110 (5)
  • KC9120 (4)
  • KC9125 (5)
  • KC9140 (4)
  • KC9145 (3)
  • KC9215 (3)
  • KC9225 (3)
  • KC9240 (5)
  • KC9240NEW (5)
  • KC9245 (3)
  • KC9315 (4)
  • KC9320 (2)
  • KC9325 (2)
  • KC935 (4)
  • KC950 (3)
  • KC990 (4)
  • KCD25 (1)
  • KCK05 (3)
  • KCK05B (2)
  • KCK15 (2)
  • KCK15B (3)
  • KCK20 (3)
  • KCK20B (3)
  • KCM15 (3)
  • KCM15B (2)
  • KCM25 (5)
  • KCM25B (3)
  • KCM35 (2)
  • KCM35B (2)
  • KCP05 (1)
  • KCP05B (2)
  • KCP10 (4)
  • KCP10B (4)
  • KCP25 (5)
  • KCP25B (5)
  • KCP25C (3)
  • KCP30 (5)
  • KCP30B (4)
  • KCP40 (3)
  • KCP40B (4)
  • KCPK05 (2)
  • KCPK30 (1)
  • KCS10 (3)
  • KCS10B (4)
  • KCU10 (6)
  • KCU25 (3)
  • KD050 (1)
  • KD081 (1)
  • KD100 (1)
  • KD120 (1)
  • KD1400 (1)
  • KD1405 (1)
  • KD1425 (1)
  • KM1 (2)
  • KMF (1)
  • KS15 (1)
  • KT1120 (1)
  • KT125 (1)
  • KT150 (1)
  • KT175 (1)
  • KT315 (3)
  • KT325 (1)
  • KU10T (1)
  • KU30T (2)
  • KY1310 (1)
  • KY1320 (1)
  • KY1525 (1)
  • KY1540 (2)
  • KY1615 (2)
  • KY2000 (2)
  • KY2100 (2)
  • KY3000 (3)
  • KY3400 (3)
  • KY3500 (3)
  • KY4000 (1)
  • KY4300 (2)
  • KY4400 (2)
  • KYHK15B (2)
  • KYK10 (1)
  • KYK25 (1)
  • KYK35 (3)
  • KYS25 (2)
  • KYS30 (2)
  • NL200 (1)
  • NL250 (2)
  • NL300 (3)
  • NL400 (3)
  • NL920 (1)
  • P25 (1)
  • PS5 (1)
  • SP0819 (2)
  • SP3019 (2)
  • SP4019 (1)
  • SPADAP (2)
  • X00511 (1)
  • X00580 (1)
  • X00581 (1)
  • X00582 (1)
  • X00583 (1)
  • X00584 (1)
  • X00585 (1)
  • X00586 (1)
  • X00591 (1)
  • X00592 (1)
  • X00593 (1)
  • X00594 (1)
  • X00596 (1)
  • X00597 (1)
  • X00599 (1)
Hand Of Tool
Hand Of Tool
  • L (3)
  • N (1)
  • R (3)
Wiper Insert
Wiper Insert
  • N (6)
  • Y (1)
F Dimension
F Dimension
  • 3.6 mm (1)
  • 17.0 mm (1)
  • 20.0 mm (1)
  • 25.401 mm (1)
  • 32.0 mm (1)
  • 40.0 mm (1)
  • 43.0 mm (1)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.143 in (1)
  • 0.669 in (1)
  • 0.787 in (1)
  • 1.0 in (1)
  • 1.26 in (1)
  • 1.575 in (1)
  • 1.693 in (1)
F Dimension Min to F Dimension Max
Cutting Direction
Cutting Direction
  • B (1)
  • E (4)
  • S (2)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (4)
  • NEGATIVE-ZERO (1)
  • NEUTRAL (ZERO) (2)
Front-End
Clamp Style
Clamp Style
  • C (1)
  • D (3)
  • M (1)
  • S (1)
  • Y (1)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (2)
  • PRISMATIC (1)
  • R-ROUND (2)
  • S-SQUARE 90 (2)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.63 in (1)
  • 1.5 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 16.0 mm (1)
  • 38.1 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (1)
  • B L (1)
  • C A (3)
  • C N (3)
  • D P (1)
  • H T (3)
  • H W (6)
Back-End
Connection Type
Connection Type
  • CUTOFF BLADE (1)
  • SQUARE SHANK (6)
Shank Height
Shank Height
  • 0.63 in (2)
  • 1.0 in (1)
  • 1.26 in (3)
  • 1.575 in (1)
Shank Height Min to Shank Height Max
Shank Height
Shank Height
  • 16.0 mm (2)
  • 25.401 mm (1)
  • 32.0 mm (3)
  • 40.0 mm (1)
Shank Height Min to Shank Height Max
Shank Width
Shank Width
  • 0.126 in (1)
  • 0.63 in (2)
  • 0.984 in (1)
  • 1.0 in (1)
  • 1.26 in (1)
  • 1.575 in (1)
Shank Width Min to Shank Width Max
Shank Width
Shank Width
  • 3.2 mm (1)
  • 16.0 mm (2)
  • 25.0 mm (1)
  • 25.401 mm (1)
  • 32.0 mm (1)
  • 40.0 mm (1)
Shank Width Min to Shank Width Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Kenloc Inserts
(1 Products)
  • TurningTurning
  • ProfilingProfiling
  • FacingFacing
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length Gage Insert Lock Pin ID Drive Size Clamp Screw ID Drive Size
1100938 MCLNL1616H09 MCLNL1616H09 16.0000 .6299 16.0000 .6299 20.0000 .7874 100.0000 3.937 25.0000 .9800 CN..090308 2 mm 2.5 mm
    List price:
    $66.62 /each
    Your price:
    Qty
    List price:
    Discount: %
    Your price:
    Replacement This item is no longer available
    Replacement Product Please contact customer service for assistance
    Qty

    Sold in pkg. of

    ORIGINAL PRODUCT

    Kenloc™ Inserts
    (1 Products)
    • TurningTurning
    • FacingFacing
    View Products
    SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [FA] F A Dimension [FA] F A Dimension Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size
    2273098 DCRNL3225P12KC04 DCRNL3225P12KC04 32.0000 1.260 25.0000 .9840 32.0000 1.260 170.0000 6.693 32.0000 1.260 3.3400 .1320 CN..120408 15 IP 15 IP
      List price:
      $85.12 /each
      Your price:
      Qty
      List price:
      Discount: %
      Your price:
      Replacement This item is no longer available
      Replacement Product Please contact customer service for assistance
      Qty

      Sold in pkg. of

      ORIGINAL PRODUCT

      (1 Products)
      View Products
      List price:
      Discount: %
      Your price:
      Replacement This item is no longer available
      Replacement Product Please contact customer service for assistance
      Qty

      Sold in pkg. of

      ORIGINAL PRODUCT

      Screw-On Inserts
      (1 Products)
      • TurningTurning
      • ProfilingProfiling
      • FacingFacing
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [CD] Cutting Depth [CD] Cutting Depth Gage Insert Insert Screw ID Drive Size
      1097888 SRACR1616Q08 SRACR1616Q08 16.0000 .6299 16.0000 .6299 17.0000 .6693 180.0000 7.086 35.0000 1.378 16.0000 .6299 RC..0803M0 T9
        List price:
        $35.17 /each
        Your price:
        Qty
        List price:
        Discount: %
        Your price:
        Replacement This item is no longer available
        Replacement Product Please contact customer service for assistance
        Qty

        Sold in pkg. of

        ORIGINAL PRODUCT

        Kendex™ Positive Inserts
        (1 Products)
        View Products
        SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [CD] Cutting Depth [CD] Cutting Depth [H3]Head Bottom Offset [H3]Head Bottom Offset Gage Insert Clamp Screw ID Drive Size
        1298883 4111664VRS 4111664VRS 25.4000 1.000 25.4000 1.000 25.4000 1.000 152.4000 6.000 38.1000 1.500 38.1000 1.500 6.4000 .2500 R..V45 3.5 mm
          List price:
          $99.06 /each
          Your price:
          Qty
          List price:
          Discount: %
          Your price:
          Replacement This item is no longer available
          Replacement Product Please contact customer service for assistance
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          Kenloc™ Inserts
          (1 Products)
          • TurningTurning
          • FacingFacing
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [L1A] L1 A Dimension [L1A] L1 A Dimension Gage Insert Lock Pin ID Drive Size Shim Screw ID Drive Size Clamp Screw ID Drive Size
          2273143 DSKNR3232P19KC06 DSKNR3232P19KC06 32.0000 1.260 32.0000 1.260 40.0000 1.575 170.0000 6.693 38.0000 1.500 4.5800 .1800 SN..190612 25 IP 25 IP 25 IP
            List price:
            $100.05 /each
            Your price:
            Qty
            List price:
            Discount: %
            Your price:
            Replacement This item is no longer available
            Replacement Product Please contact customer service for assistance
            Qty

            Sold in pkg. of

            ORIGINAL PRODUCT

            Kenloc™ Inserts
            (1 Products)
            • TurningTurning
            View Products
            SAP Material Number ISO Catalog Number ANSI Catalog Number [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [LH] Head Length [LH] Head Length [FA] F A Dimension [FA] F A Dimension Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size
            2456321 DSRNR4040S25KC09 DSRNR4040S25KC09 40.0000 1.575 40.0000 1.575 43.0000 1.693 250.0000 9.843 52.0000 2.047 6.1300 .2410 SN..250924 25 IP 25 IP
              List price:
              $167.86 /each
              Your price:
              Qty
              List price:
              Discount: %
              Your price:
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance
              Qty

              Sold in pkg. of

              product-image
              Please adjust the following properties from

              ISO Catalog Number

              ANSI Catalog Number

              to find similar products.
              You are about to create a duplicate . Do you want to proceed?
              You are about to delete Do you want to proceed?
              What would you like to rename your to?
              Please enter a valid name
              Please enter a name for the duplicate
              Please enter a valid name
              You are about to add to your My Solutions page. Do you want to proceed?
              Please enter a valid name
              Send a copy of

              Please enter a valid Email
              Please enter a valid name

              The following CAD files are available

              Please select a file to download

              You should be logged to see your dashboard information
              Session expired due to inactivity, please login again
              The product/s () you were trying to add to the cart is/are not available, please contact customer service.
              item(s) successfully added to the cart
              View Cart
              DOWNLOAD TYPE:



              . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

              SAP Material Number ISO Catalog Number Grade    
              Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

              You are about to leave the Solution building process.

              Are you sure you want to leave?