Suggestions

Product Suggestions

Product Categories

Resources

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read

Road Razor Series

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
No filters matching ""
Narrow by category:
View Products in
Metric
Inch

ORIGINAL PRODUCT

Road Rehabilitation Conicals

RoadRazor II™ • RZ Series 20mm (.76") Shank
(1 Products)
  • Cutting Conditions: AbrasiveCutting Conditions: Abrasive
  • Cutting Conditions: MediumCutting Conditions: Medium
  • X TreatmentX Treatment
  • Insert Type: Flat BottomInsert Type: Flat Bottom
  • Medium Horsepower: 100–300HPMedium Horsepower: 100–300HP
  • Tool with Puller GrooveTool with Puller Groove
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [TD] Tip Diameter [TD] Tip Diameter [TDS] Tip Diameter Start [TDS] Tip Diameter Start [D] Shank/Bore Diameter [D] Shank/Bore Diameter Cutting Condition EW_MACHINE_POWER EW_CON_RETAINER_STYLE [D2] Body Diameter Workpiece Side [D2] Body Diameter Workpiece Side [TL] Tip Length [TL] Tip Length [OAL] Overall Length [OAL] Overall Length [L1] Gage Length [L1] Gage Length [WD] Washer Diameter [WD] Washer Diameter [WS] Washer Thickness [WS] Washer Thickness
5387620 RZ34P RZ34P K706 18.700 .7400 10.500 .4200 19.800 .7800 ABRASIVE medium to high FRICTION 41.280 1.625 19.000 .7500 91.600 3.610 50.200 1.980 44.400 1.750 3.500 .1400
    List price:
    $10.99 /each.
    Your price::
    List price:
    Discount: %
    Your price::
    Replacement This item is not available
    Replacement Product This item may be available through a distributor

    ORIGINAL PRODUCT

    Road Rehabilitation Conicals

    RoadRazor II™ • RZ Series 20mm (.76") Shank
    (1 Products)
    • Cutting Conditions: SevereCutting Conditions: Severe
    • X TreatmentX Treatment
    • Insert Type: Flat BottomInsert Type: Flat Bottom
    • High Horsepower: 300–1000HPHigh Horsepower: 300–1000HP
    View Products
    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [TD] Tip Diameter [TD] Tip Diameter [TDS] Tip Diameter Start [TDS] Tip Diameter Start [D] Shank/Bore Diameter [D] Shank/Bore Diameter Cutting Condition EW_MACHINE_POWER EW_CON_RETAINER_STYLE [D2] Body Diameter Workpiece Side [D2] Body Diameter Workpiece Side [TL] Tip Length [TL] Tip Length [OAL] Overall Length [OAL] Overall Length [L1] Gage Length [L1] Gage Length [WD] Washer Diameter [WD] Washer Diameter [WS] Washer Thickness [WS] Washer Thickness
    3362297 RZ08 RZ5-02 K706 21.790 .8580 11.460 .4510 19.800 .7800 HEAVY high FRICTION 34.200 1.340 20.830 .8200 89.600 3.530 48.000 1.890 44.450 1.750 3.500 .1400
      List price:
      $8.12 /each.
      Your price::
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor

      ORIGINAL PRODUCT

      Road Rehabilitation Conicals

      RoadRazor™ Classic • RC Series 20mm (.76") Shank
      (1 Products)
      • Cutting Conditions: LightCutting Conditions: Light
      • Insert Type: Flat BottomInsert Type: Flat Bottom
      • Low Horsepower: <100HPLow Horsepower: <100HP
      • Tool with Puller GrooveTool with Puller Groove
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [TD] Tip Diameter [TD] Tip Diameter [TDS] Tip Diameter Start [TDS] Tip Diameter Start [D] Shank/Bore Diameter [D] Shank/Bore Diameter Cutting Condition EW_MACHINE_POWER EW_CON_RETAINER_STYLE [D2] Body Diameter Workpiece Side [D2] Body Diameter Workpiece Side [TL] Tip Length [TL] Tip Length [OAL] Overall Length [OAL] Overall Length [L1] Gage Length [L1] Gage Length
      5638891 RC1-01P RC1-01P K706 15.900 .6200 7.800 .3100 20.000 .7800 SOFT low FRICTION 41.900 1.650 16.300 .6400 91.900 3.620 47.600 1.880
        List price:
        $6.28 /each.
        Your price::
        List price:
        Discount: %
        Your price::
        Replacement This item is not available
        Replacement Product This item may be available through a distributor

        ORIGINAL PRODUCT

        Road Rehabilitation Conicals

        RoadRazor™ Classic • RC Series 20mm (.76") Shank
        (1 Products)
        • Cutting Conditions: MediumCutting Conditions: Medium
        • Insert Type: Flat BottomInsert Type: Flat Bottom
        • High Horsepower: 300–1000HPHigh Horsepower: 300–1000HP
        • Tool with Puller GrooveTool with Puller Groove
        View Products
        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [TD] Tip Diameter [TD] Tip Diameter [TDS] Tip Diameter Start [TDS] Tip Diameter Start [D] Shank/Bore Diameter [D] Shank/Bore Diameter Cutting Condition EW_MACHINE_POWER EW_CON_RETAINER_STYLE [D2] Body Diameter Workpiece Side [D2] Body Diameter Workpiece Side [TL] Tip Length [TL] Tip Length [OAL] Overall Length [OAL] Overall Length [L1] Gage Length [L1] Gage Length [WD] Washer Diameter [WD] Washer Diameter [WS] Washer Thickness [WS] Washer Thickness
        1758412 RP16 RC3-02P K706 18.750 .7380 10.540 .4150 19.800 .7800 MEDIUM medium FRICTION 41.300 1.620 20.300 .8000 91.600 3.610 50.200 1.980 44.450 1.750 3.500 .1400
          List price:
          $9.07 /each.
          Your price::
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor

          ORIGINAL PRODUCT

          Road Rehabilitation Conicals

          RoadRazor™ Classic • RC Series 20mm (.76") Shank
          (1 Products)
          • Cutting Conditions: LightCutting Conditions: Light
          • Insert Type: Flat BottomInsert Type: Flat Bottom
          • Low Horsepower: <100HPLow Horsepower: <100HP
          • Tool with Puller GrooveTool with Puller Groove
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [TD] Tip Diameter [TD] Tip Diameter [D] Shank/Bore Diameter [D] Shank/Bore Diameter EW_MACHINE_POWER EW_CON_RETAINER_STYLE [D2] Body Diameter Workpiece Side [D2] Body Diameter Workpiece Side [TL] Tip Length [TL] Tip Length [OAL] Overall Length [OAL] Overall Length [L1] Gage Length [L1] Gage Length
          1010862 RC2-01P RC2-01P K706 15.900 .6200 19.500 .7700 low to medium FRICTION 41.900 1.650 14.070 .5540 89.700 3.530 45.400 1.790
            List price:
            $7.00 /each.
            Your price::
            List price:
            Discount: %
            Your price::
            Replacement This item is not available
            Replacement Product This item may be available through a distributor

            ORIGINAL PRODUCT

            14mm Systems • Microtrencher/Horizontal Directional Drilling

            14mm Shank Conicals • CM Series
            (1 Products)
            • Cutting Conditions: AbrasiveCutting Conditions: Abrasive
            • Cutting Conditions: MediumCutting Conditions: Medium
            • External RetainerExternal Retainer
            View Products
            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [TD] Tip Diameter [TD] Tip Diameter [TDS] Tip Diameter Start [TDS] Tip Diameter Start [D] Shank/Bore Diameter [D] Shank/Bore Diameter Cutting Condition EW_MACHINE_POWER EW_CON_RETAINER_STYLE [D2] Body Diameter Workpiece Side [D2] Body Diameter Workpiece Side [TL] Tip Length [TL] Tip Length [OAL] Overall Length [OAL] Overall Length [L1] Gage Length [L1] Gage Length
            1795208 CM63 CM63 K706 15.875 .6250 19.050 .7500 13.970 .5500 MEDIUM low ROUND HAIR PIN 24.892 .9800 13.716 .5400 56.642 2.230 29.210 1.150
              List price:
              $9.50 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor

              ORIGINAL PRODUCT

              13mm Systems • Microtrencher/Horizontal Directional Drilling

              13mm Shank Conicals • CM Series
              (1 Products)
              • Cutting Conditions: MediumCutting Conditions: Medium
              • Cutting Conditions: LightCutting Conditions: Light
              • Internal RetainerInternal Retainer
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [TD] Tip Diameter [TD] Tip Diameter [TDS] Tip Diameter Start [TDS] Tip Diameter Start [D] Shank/Bore Diameter [D] Shank/Bore Diameter Cutting Condition EW_MACHINE_POWER EW_CON_RETAINER_STYLE [D2] Body Diameter Workpiece Side [D2] Body Diameter Workpiece Side [TL] Tip Length [TL] Tip Length [OAL] Overall Length [OAL] Overall Length [L1] Gage Length [L1] Gage Length
              4080539 CM51 CM51 K706 15.880 .6250 7.820 .3080 12.950 .5100 LIGHT low FRICTION 24.890 .9800 16.280 .6410 51.500 2.030 28.000 1.100
                List price:
                $8.86 /each.
                Your price::
                List price:
                Discount: %
                Your price::
                Replacement This item is not available
                Replacement Product This item may be available through a distributor

                ORIGINAL PRODUCT

                14mm Systems • Microtrencher/Horizontal Directional Drilling

                14mm Shank Conicals • CM Series
                (1 Products)
                • Cutting Conditions: LightCutting Conditions: Light
                • Cutting Conditions: MediumCutting Conditions: Medium
                • Tool with Puller GrooveTool with Puller Groove
                • External RetainerExternal Retainer
                View Products
                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [TD] Tip Diameter [TD] Tip Diameter [TDS] Tip Diameter Start [TDS] Tip Diameter Start [D] Shank/Bore Diameter [D] Shank/Bore Diameter Cutting Condition EW_CON_RETAINER_STYLE [D2] Body Diameter Workpiece Side [D2] Body Diameter Workpiece Side [TL] Tip Length [TL] Tip Length [OAL] Overall Length [OAL] Overall Length [L1] Gage Length [L1] Gage Length
                1094015 CM61 CM61 K3055 6.731 .2650 9.779 .3850 13.970 .5500 LIGHT FLAT LOCK RING 19.050 .7500 16.256 .6400 62.357 2.455 27.305 1.075
                  List price:
                  $8.78 /each.
                  Your price::
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor

                  ORIGINAL PRODUCT

                  11mm Systems • Microtrencher/Horizontal Directional Drilling

                  11mm Shank Conicals • CM Series
                  (1 Products)
                  • Cutting Conditions: MediumCutting Conditions: Medium
                  • Cutting Conditions: LightCutting Conditions: Light
                  • External RetainerExternal Retainer
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [TD] Tip Diameter [TD] Tip Diameter [D] Shank/Bore Diameter [D] Shank/Bore Diameter EW_MACHINE_POWER EW_CON_RETAINER_STYLE [D2] Body Diameter Workpiece Side [D2] Body Diameter Workpiece Side [TL] Tip Length [TL] Tip Length [OAL] Overall Length [OAL] Overall Length [L1] Gage Length [L1] Gage Length
                  1010778 CM42 CM42 K3560 15.880 .6250 11.300 .4440 low SNAP RING 19.050 .7500 13.500 .5300 54.460 2.140 27.200 1.070
                    List price:
                    $7.44 /each.
                    Your price::
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is not available
                    Replacement Product This item may be available through a distributor

                    ORIGINAL PRODUCT

                    14mm Systems • Microtrencher/Horizontal Directional Drilling

                    14mm Shank Conicals • CM Series
                    (1 Products)
                    • Cutting Conditions: AbrasiveCutting Conditions: Abrasive
                    • Cutting Conditions: MediumCutting Conditions: Medium
                    • Internal RetainerInternal Retainer
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [TD] Tip Diameter [TD] Tip Diameter [TDS] Tip Diameter Start [TDS] Tip Diameter Start [D] Shank/Bore Diameter [D] Shank/Bore Diameter Cutting Condition EW_MACHINE_POWER EW_CON_RETAINER_STYLE [D2] Body Diameter Workpiece Side [D2] Body Diameter Workpiece Side [TL] Tip Length [TL] Tip Length [OAL] Overall Length [OAL] Overall Length [L1] Gage Length [L1] Gage Length
                    1876905 CM65 CM65 K706 15.875 .6250 9.520 .3750 13.970 .5500 ABRASIVE low FRICTION 24.892 .9800 13.716 .5400 52.959 2.085 29.464 1.160
                      List price:
                      $9.55 /each.
                      Your price::
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor

                      ORIGINAL PRODUCT

                      Road Rehabilitation Tools

                      .76 (20mm) Shank
                      (1 Products)
                      • Cutting Conditions: MediumCutting Conditions: Medium
                      • Noise ReductionNoise Reduction
                      • X TreatmentX Treatment
                      • Insert Type: Flat BottomInsert Type: Flat Bottom
                      • Fuel EfficiencyFuel Efficiency
                      • Medium Horsepower: 100–300HPMedium Horsepower: 100–300HP
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [TD] Tip Diameter [TD] Tip Diameter [TDS] Tip Diameter Start [TDS] Tip Diameter Start [D] Shank/Bore Diameter [D] Shank/Bore Diameter Cutting Condition EW_MACHINE_POWER EW_CON_RETAINER_STYLE [D2] Body Diameter Workpiece Side [D2] Body Diameter Workpiece Side [TL] Tip Length [TL] Tip Length [OAL] Overall Length [OAL] Overall Length [L1] Gage Length [L1] Gage Length [WD] Washer Diameter [WD] Washer Diameter [WS] Washer Thickness [WS] Washer Thickness
                      5895689 RX3-01W RX3-01W K706 18.745 .7380 10.236 .4030 19.761 .7780 SOFT TO MEDIUM medium to high FRICTION 41.910 1.650 18.796 .7400 90.968 3.581 50.241 1.978 44.500 1.750 4.267 .1680
                        List price:
                        $7.04 /each.
                        Your price::
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is not available
                        Replacement Product This item may be available through a distributor

                        ORIGINAL PRODUCT

                        Road Rehabilitation Tools

                        .76 (20mm) Shank
                        (1 Products)
                        • Insert Type: Flat BottomInsert Type: Flat Bottom
                        • Cutting Conditions: HeavyCutting Conditions: Heavy
                        • Noise ReductionNoise Reduction
                        • X TreatmentX Treatment
                        • Fuel EfficiencyFuel Efficiency
                        • High Horsepower: 300–1000HPHigh Horsepower: 300–1000HP
                        View Products
                        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [TD] Tip Diameter [TD] Tip Diameter [TDS] Tip Diameter Start [TDS] Tip Diameter Start [D] Shank/Bore Diameter [D] Shank/Bore Diameter Cutting Condition EW_MACHINE_POWER EW_CON_RETAINER_STYLE [D2] Body Diameter Workpiece Side [D2] Body Diameter Workpiece Side [TL] Tip Length [TL] Tip Length [OAL] Overall Length [OAL] Overall Length [L1] Gage Length [L1] Gage Length [WD] Washer Diameter [WD] Washer Diameter [WS] Washer Thickness [WS] Washer Thickness
                        5895941 RX4-01W RX4-01W K706 18.745 .7380 11.455 .4510 19.761 .7780 MEDIUM TO HARD medium to high FRICTION 41.910 1.650 19.050 .7500 91.288 3.594 50.495 1.988 44.500 1.750 4.315 .1700
                          List price:
                          $8.17 /each.
                          Your price::
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor

                          ORIGINAL PRODUCT

                          Road Rehabilitation Tools

                          .76 (20mm) Shank
                          (1 Products)
                          • Cutting Conditions: LightCutting Conditions: Light
                          • Noise ReductionNoise Reduction
                          • X TreatmentX Treatment
                          • Insert Type: Flat BottomInsert Type: Flat Bottom
                          • Fuel EfficiencyFuel Efficiency
                          • Medium Horsepower: 100–300HPMedium Horsepower: 100–300HP
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [TD] Tip Diameter [TD] Tip Diameter [TDS] Tip Diameter Start [TDS] Tip Diameter Start [D] Shank/Bore Diameter [D] Shank/Bore Diameter Cutting Condition EW_MACHINE_POWER EW_CON_RETAINER_STYLE [D2] Body Diameter Workpiece Side [D2] Body Diameter Workpiece Side [TL] Tip Length [TL] Tip Length [OAL] Overall Length [OAL] Overall Length [L1] Gage Length [L1] Gage Length [WD] Washer Diameter [WD] Washer Diameter [WS] Washer Thickness [WS] Washer Thickness
                          5895688 RX2-01W RX2-01W K706 18.745 .7380 10.236 .4300 19.761 .7780 SOFT low to medium FRICTION 41.910 1.650 17.018 .6700 89.190 3.511 48.463 1.908 45.875 1.806 4.267 .1680
                            List price:
                            $6.49 /each.
                            Your price::
                            List price:
                            Discount: %
                            Your price::
                            Replacement This item is not available
                            Replacement Product This item may be available through a distributor

                            Support

                            Chat With an Expert 
                            Available Now
                            Mon-Fri 8am - 6pm ET

                            Global Support

                            Shop

                            Shop Kennametal Merchandise

                            Find Us on Ariba

                            Return Policy

                            Careers

                            Work for Kennametal

                            ✉ Stay In Touch

                            Join our Mailing List

                            ⤓ NOVO App

                            Find Replacements for Obsolete Tools

                            Download Now

                            Language

                            © 2022 Terms & Conditions of Use | Conditions of Sale | Data Privacy Policy

                            Kennametal Inc. 525 William Penn Place Suite 3300, Pittsburgh, PA 15219

                            product-image
                            Please adjust the following properties from

                            ISO Catalog Number

                            ANSI Catalog Number

                            to find similar products.
                            You are about to create a duplicate . Do you want to proceed?
                            You are about to delete Do you want to proceed?
                            What would you like to rename your to?
                            Please enter a valid name
                            Please enter a name for the duplicate
                            Please enter a valid name
                            You are about to add to your My Solutions page. Do you want to proceed?
                            Please enter a valid name
                            Send a copy of

                            Please enter a valid Email
                            Please enter a valid name

                            The following CAD files are available

                            Please select a file to download

                            Can’t find the file type you’re looking for?
                            Request Drawings »

                            You should be logged to see your dashboard information
                            Session expired due to inactivity, please login again
                            The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                            item(s) successfully added to the cart
                            View Cart