successfully added to cart
View Cart

Notifications

Mark all as read
Screw-On Inserts
Screw-On Inserts
Screw-On Inserts
Screw-On Inserts

CPMT-FP

Screw-On Inserts

Features and benefits

  • Finishing geometry with positive rake face for chip control in difficult materials.

  • Beyond™ Drive™ grades included.

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
S High-Temp Alloys
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (17)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (17)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (17)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (17)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (17)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (17)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (17)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (17)
  • M Stainless Steel (20)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (20)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (20)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (20)
  • K Cast Iron (13)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (13)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (13)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (13)
  • S High-Temp Alloys (16)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (16)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (16)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (16)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (12)
Select First Choice
  • IN (1)
Applications
Applications
  • ID Thread Turning ID Thread Turning (1)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (15)
  • Lightly Interrupted Cut (22)
  • Smooth Cut (28)
  • Varying Depth of Cut (10)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 2.0 (14)
  • 4.0 (15)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Corner configuration
Corner Radius
Corner Radius
  • 0.008 in (7)
  • 0.0156 in (16)
  • 0.0313 in (6)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (7)
  • 0.4 mm (16)
  • 0.8 mm (6)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (15)
  • Lightly Interrupted Cut (22)
  • Smooth Cut (28)
  • Varying Depth of Cut (10)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KCK20 (1)
  • KCM15 (1)
  • KCM25 (3)
  • KCP10 (2)
  • KCP25 (3)
  • KCP25B (3)
  • KCS10 (7)
  • KCU25 (5)
  • KTP10 (4)
Insert Geometry
Insert IC Size
Insert IC Size
  • 5.56 mm (4)
  • 6.35 mm (13)
  • 9.525 mm (12)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.2188 in (4)
  • 0.25 in (13)
  • 0.375 in (12)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 5.646 mm (4)
  • 6.448 mm (13)
  • 9.672 mm (12)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.2223 in (4)
  • 0.2539 in (13)
  • 0.3808 in (12)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Tool Material
Cutting Tool Material
  • H T (4)
  • H W (25)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 29 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
3769347 CPMT050202FP CPMT181505FP KCS10 5.5600 .2188 5.6460 .2223 2.3800 .0938 0.2000 .0080 2.5000 .0984  
    List price:
    $17.45 /each.
    Your price::
    Qty
    3769121 CPMT050204FP CPMT18151FP KCP25 5.5600 .2188 5.6460 .2223 2.3800 .0938 0.4000 .0156 2.5000 .0984  
      List price:
      $17.45 /each.
      Your price::
      Qty
      3769348 CPMT050204FP CPMT18151FP KCS10 5.5600 .2188 5.6460 .2223 2.3800 .0938 0.4000 .0156 2.5000 .0984  
        List price:
        $17.45 /each.
        Your price::
        Qty
        3769422 CPMT050204FP CPMT18151FP KCU25 5.5600 .2188 5.6460 .2223 2.3800 .0938 0.4000 .0156 2.5000 .0984  
          List price:
          $17.45 /each.
          Your price::
          Qty
          3769055 CPMT060202FP CPMT21505FP KTP10 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.2000 .0080 2.8000 .1102  
            List price:
            $18.12 /each.
            Your price::
            Qty
            3769124 CPMT060202FP CPMT21505FP KCP25 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.2000 .0080 2.8000 .1102  
              List price:
              $19.44 /each.
              Your price::
              Qty
              3769349 CPMT060202FP CPMT21505FP KCS10 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.2000 .0080 2.8000 .1102  
                List price:
                $19.44 /each.
                Your price::
                Qty
                3769423 CPMT060202FP CPMT21505FP KCU25 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.2000 .0080 2.8000 .1102  
                  List price:
                  $19.44 /each.
                  Your price::
                  Qty
                  3769056 CPMT060204FP CPMT2151FP KTP10   6.3500 .2500 6.4480 .2539 2.3800 .0938 0.4000 .0156 2.8000 .1102
                    List price:
                    $18.12 /each.
                    Your price::
                    Qty
                    3769006 CPMT060204FP CPMT2151FP KCP10 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.4000 .0156 2.8000 .1102  
                      List price:
                      $19.44 /each.
                      Your price::
                      Qty
                      3769224 CPMT060204FP CPMT2151FP KCM25 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.4000 .0156 2.8000 .1102  
                        List price:
                        $19.44 /each.
                        Your price::
                        Qty
                        3769310 CPMT060204FP CPMT2151FP KCK20 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.4000 .0156 2.8000 .1102  
                          List price:
                          $19.44 /each.
                          Your price::
                          Qty
                          3769350 CPMT060204FP CPMT2151FP KCS10 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.4000 .0156 2.8000 .1102  
                            List price:
                            $19.44 /each.
                            Your price::
                            Qty
                            3769424 CPMT060204FP CPMT2151FP KCU25 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.4000 .0156 2.8000 .1102  
                              List price:
                              $19.44 /each.
                              Your price::
                              Qty
                              5537429 CPMT060204FP CPMT2151FP KCP25B 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.4000 .0156 2.8000 .1102  
                                List price:
                                $19.44 /each.
                                Your price::
                                Qty
                                3769057 CPMT060208FP CPMT2152FP KTP10 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.4000 .0156 2.8000 .1102  
                                  List price:
                                  $18.12 /each.
                                  Your price::
                                  Qty
                                  3769132 CPMT060208FP CPMT2152FP KCP25 6.3500 .2500 6.4480 .2539 2.3800 .0938 0.4000 .0156 2.8000 .1102  
                                    List price:
                                    $19.44 /each.
                                    Your price::
                                    Qty
                                    3769226 CPMT09T302FP CPMT32505FP KCM25 9.5250 .3750 9.6720 .3808 3.9700 .1563 0.2000 .0080 4.4000 .1732  
                                      List price:
                                      $22.38 /each.
                                      Your price::
                                      Qty
                                      3769352 CPMT09T302FP CPMT32505FP KCS10 9.5250 .3750 9.6720 .3808 3.9700 .1563 0.2000 .0080 4.4000 .1732  
                                        List price:
                                        $22.38 /each.
                                        Your price::
                                        Qty
                                        3769107 CPMT09T304FP CPMT3251FP KCM15 9.5250 .3750 9.6720 .3808 3.9700 .1563 0.4000 .0156 4.4000 .1732  
                                          List price:
                                          $22.38 /each.
                                          Your price::
                                          Qty
                                          3769353 CPMT09T304FP CPMT3251FP KCS10 9.5250 .3750 9.6720 .3808 3.9700 .1563 0.4000 .0156 4.4000 .1732  
                                            List price:
                                            $22.38 /each.
                                            Your price::
                                            Qty
                                            3769427 CPMT09T304FP CPMT3251FP KCU25 9.5250 .3750 9.6720 .3808 3.9700 .1563 0.4000 .0156 4.4000 .1732  
                                              List price:
                                              $22.38 /each.
                                              Your price::
                                              Qty
                                              5537432 CPMT09T304FP CPMT3251FP KCP25B 9.5250 .3750 9.6720 .3808 3.9700 .1563 0.4000 .0156 4.4000 .1732  
                                                List price:
                                                $22.38 /each.
                                                Your price::
                                                Qty
                                                3769009 CPMT09T308FP CPMT3252FP KCP10 9.5250 .3750 9.6720 .3808 3.9700 .1563 0.8000 .0312 4.4000 .1732  
                                                  List price:
                                                  $22.38 /each.
                                                  Your price::
                                                  Qty
                                                  3769060 CPMT09T308FP CPMT3252FP KTP10 9.5250 .3750 9.6720 .3808 3.9700 .1563 0.8000 .0312 4.4000 .1732  
                                                    List price:
                                                    $21.01 /each.
                                                    Your price::
                                                    Qty
                                                    3769228 CPMT09T308FP CPMT3252FP KCM25 9.5250 .3750 9.6720 .3808 3.9700 .1563 0.8000 .0312 4.4000 .1732  
                                                      List price:
                                                      $22.38 /each.
                                                      Your price::
                                                      Qty
                                                      3769354 CPMT09T308FP CPMT3252FP KCS10 9.5250 .3750 9.6720 .3808 3.9700 .1563 0.8000 .0312 4.4000 .1732  
                                                        List price:
                                                        $22.38 /each.
                                                        Your price::
                                                        Qty
                                                        3769428 CPMT09T308FP CPMT3252FP KCU25 9.5250 .3750 9.6720 .3808 3.9700 .1563 0.8000 .0312 4.4000 .1732  
                                                          List price:
                                                          $22.38 /each.
                                                          Your price::
                                                          Qty
                                                          5537435 CPMT09T308FP CPMT3252FP KCP25B 9.5250 .3750 9.6720 .3808 3.9700 .1563 0.8000 .0312 4.4000 .1732  
                                                            List price:
                                                            $22.38 /each.
                                                            Your price::
                                                            Qty
                                                            List price:
                                                            Discount: %
                                                            Your price::
                                                            Replacement This item is not available
                                                            Replacement Product This item may be available through a distributor
                                                            Qty

                                                            Sold in pkg. of

                                                            Grades

                                                            • KCK20

                                                              A new PVD multilayer AlTiN + AlCrN coated carbide with an excellent combination of wear resistance and coating strength. The KCK20 grade is specifically engineered to maximize coating adhesion and edge strength, making this grade ideal in wet interrupted cutting of gray and ductile irons, and can also be used in dry conditions. It can be used in a wide range of applications, from finishing to roughing, to maximize productivity wherever strength and reliability are needed.

                                                              P Steel
                                                              K Cast Iron
                                                            • KCK20B

                                                              Composition: A multilayered coating with thick MTCVD TiCN-Al2O3-TiOCN layers applied over a carbide substrate specifically engineered for cast irons.
                                                              Application: Delivers consistent performance in high-speed machining of grey and ductile irons. The substrate design permits the insert to stay in the cut for a long time at high speeds with minimum deformation. The thick CVD coating and post-coat treatment provide superior wear resistance ensuring long and consistent tool life. Can be applied both in straight and lightly interrupted cuts.

                                                              P Steel
                                                              K Cast Iron
                                                            • KCM15

                                                              Composition: Nanostructured PVD TiAlN coated fine-grain carbide with a golden TiN top layer for better wear identification and superior surface finish.
                                                              Application: A state-of-the-art surface condition enhances low adhesion potential to stainless steel materials and offers superior chip evacuation even in low-pressure coolant applications. Applicable for stainless steel and high-temperature resistant materials.

                                                              P Steel
                                                              S High-Temp Alloys
                                                              M Stainless Steel
                                                            • KCM25

                                                              Composition: A multilayer CVD coating comprised of TiN-MT-TiCN-Al2O3 layers over a tough, cobalt-enriched carbide substrate.
                                                              Application: This CVD-coated grade is designed for general-purpose machining of austenitic stainless steels at moderate speeds and feeds. KCM25 inserts offer an extraordinary combination of toughness, built-up edge resistance, and wear resistance in stainless steel applications.

                                                              P Steel
                                                              S High-Temp Alloys
                                                              M Stainless Steel
                                                            • KCP05

                                                              Composition: An innovative, highly deformation-resistant, cobalt-enriched substrate with a specially designed, adherent MTCVD-TiCN-Al2O3 coating.
                                                              Application: For finishing to semi-finishing of most steels, ferritic, martensitic, and PH stainless steels and cast irons. Provides excellent combination of deformation resistance and insert edge strength. The new coating combined with a state-of-the-art post-coat treatment provides high-productivity with long predictable tool life and superior workpiece surface finish.

                                                              P Steel
                                                              K Cast Iron
                                                            • KCP10

                                                              Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3 coating for maximum wear resistance.
                                                              Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

                                                              P Steel
                                                              K Cast Iron
                                                            • KCP10B

                                                              Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3-TiOCN coating for maximum wear resistance.

                                                              Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

                                                              P Steel
                                                              K Cast Iron
                                                            • KCP25

                                                              Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3 coating with superior interlayer adhesion.
                                                              Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

                                                              P Steel
                                                              K Cast Iron
                                                            • KCP25B

                                                              Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3-TiOCN coating with superior interlayer adhesion.

                                                              Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

                                                              P Steel
                                                              K Cast Iron
                                                            • KCS10

                                                              Composition: An advanced PVD-AlTiN coated, fine-grained tungsten carbide grade.
                                                              Application: The KCS10 grade specifically engineered for the productive machining of high-temperature alloys. The fine-grained tungsten carbide substrate has excellent toughness and deformation resistance while the advanced PVD coating allows metalcutting speeds double those of conventional PVD-coated cutting tools.

                                                              S High-Temp Alloys
                                                              M Stainless Steel
                                                            • KCU10

                                                              Composition: An advanced multilayer PVD coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.

                                                              Application: The KCU10™ grade is ideal for finishing to general machining of most workpiece materials at a wide range of speed and feed capabilities. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys with improved edge toughness and higher cutting speed/feed capability.

                                                              P Steel
                                                              S High-Temp Alloys
                                                              M Stainless Steel
                                                            • KCU25

                                                              Composition: An advanced PVD grade with hard AlTiN coating and fine-grain unalloyed substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.
                                                              Application: The KCU25™ grade is ideal for general machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials in a wide range of speeds and feeds with improved edge toughness for interrupted cuts and high feed rates.

                                                              S High-Temp Alloys
                                                              M Stainless Steel
                                                            • KTP10

                                                              Composition: A multilayer, PVD-TiN/TiCN/TiN-coated cermet turning grade.
                                                              Application: Ideal for high-speed finishing to medium machining of most carbon and alloy steels and stainless steels. Performs very well in cast and ductile iron applications, too. Provides long and consistent tool life and will produce excellent workpiece finishes.

                                                              P Steel
                                                              K Cast Iron
                                                              M Stainless Steel
                                                            • KU10
                                                              S High-Temp Alloys
                                                            product-image
                                                            Please adjust the following properties from

                                                            ISO Catalog Number

                                                            ANSI Catalog Number

                                                            to find similar products.
                                                            You are about to create a duplicate . Do you want to proceed?
                                                            You are about to delete Do you want to proceed?
                                                            What would you like to rename your to?
                                                            Please enter a valid name
                                                            Please enter a name for the duplicate
                                                            Please enter a valid name
                                                            You are about to add to your My Solutions page. Do you want to proceed?
                                                            Please enter a valid name
                                                            Send a copy of

                                                            Please enter a valid Email
                                                            Please enter a valid name

                                                            The following CAD files are available

                                                            Please select a file to download

                                                            You should be logged to see your dashboard information
                                                            Session expired due to inactivity, please login again
                                                            The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                                            item(s) successfully added to the cart
                                                            View Cart