Back to Solution
Editing Solution
Adding Solution
Solution Name: {{SolutionName}}
DUO-LOCK™ • KenCut™ RR • Chamfered • 4–5 Flutes • Metric
Modular End Milling • RQDB Style
Features and benefits
- Modular end mill for high-performance roughing applications in steel and stainless steel.
- Non-centre cutting.
- Cord profile reduces power consumption.
Uses and application
Ramping: Blank
Slotting: Square End
Side Milling/Shoulder Milling: Square End
Corner Style: Corner Chamfer
Helix Angle: 20°
Tool Dimensions: Flute Configuration: X (variable)
Workpiece Materials
P
Steel
M
Stainless Steel
K
Cast Iron
S
High-Temp Alloys
H
Hardened Materials
Filters and Columns
Filters
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
Workpiece Material
-
P Steel (5)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(5)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(5)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(5)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(5)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(5)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(5)
-
-
M Stainless Steel (5)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(5)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(5)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(5)
-
-
K Cast Iron (5)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(5)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(5)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(5)
-
-
S High-Temp Alloys (5)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(5)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(5)
-
-
H Hardened Materials (5)
-
H1Hardened Materials 44-48 HRC(5)
-
Applications
Applications
-
Pocket (5)
-
Pocket Helical (5)
-
Pocket Milling (5)
-
Pocket Plunge Milling (5)
-
Ramping (5)
-
Shoulder Milling (5)
-
-
-
Slot Milling (5)
-
Slot Square End (5)
Cutting Diameter
Cutting Diameter
-
0.394 in (1)
-
0.473 in (1)
-
0.63 in (1)
-
0.787 in (1)
-
0.984 in (1)
to
Cutting Diameter
Cutting Diameter
-
10.0 mm (1)
-
12.0 mm (1)
-
16.0 mm (1)
-
20.0 mm (1)
-
25.0 mm (1)
to
Cutting Length
Cutting Length
-
15.0 mm (1)
-
18.0 mm (1)
-
24.0 mm (1)
-
30.0 mm (1)
-
37.5 mm (1)
to
Cutting Length
Cutting Length
-
0.591 in (1)
-
0.709 in (1)
-
0.946 in (1)
-
1.181 in (1)
-
1.476 in (1)
to
Reach
Reach
-
0.886 in (1)
-
1.063 in (1)
-
1.417 in (1)
-
1.772 in (1)
-
2.224 in (1)
to
Reach
Reach
-
22.5 mm (1)
-
27.0 mm (1)
-
36.0 mm (1)
-
45.0 mm (1)
-
56.5 mm (1)
to
Number of Flutes
Number of Flutes
-
4 (4)
-
5 (1)
Back-End
Back-End Diameter
Back-End Diameter
-
9.601 mm (1)
-
11.5 mm (1)
-
15.5 mm (1)
-
19.3 mm (1)
-
24.0 mm (1)
to
Back-End Diameter
Back-End Diameter
-
0.378 in (1)
-
0.453 in (1)
-
0.61 in (1)
-
0.76 in (1)
-
0.946 in (1)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1- 5
of 5 results
Metric
Inch
Show
Metric
Inch
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | Adapter Style Machine Side | [D1] Effective Cutting Diameter | [D1] Effective Cutting Diameter | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [AP1MAX] 1st Maximum Cutting Depth | [AP1MAX] 1st Maximum Cutting Depth | [L1] Gage Length | [L1] Gage Length | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6127286 | RQDB1000X4CV | RQDB1000X4CV | KCPM15 | DUO-LOCK | 10.0000 | .3937 | 9.6 | .378 | 15.0000 | .5906 | 22.5000 | .8858 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$119.71
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6127287 | RQDB1200X4CV | RQDB1200X4CV | KCPM15 | DUO-LOCK | 12.0000 | .4724 | 11.5 | .4528 | 18.0000 | .7087 | 27.0000 | 1.063 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$158.75
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6127288 | RQDB1600X4CV | RQDB1600X4CV | KCPM15 | DUO-LOCK | 16.0000 | .6299 | 15.5 | .6102 | 24.0000 | .9449 | 36.0000 | 1.417 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$353.90
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6127289 | RQDB2000X4CV | RQDB2000X4CV | KCPM15 | DUO-LOCK | 20.0000 | .7874 | 19.3 | .7598 | 30.0000 | 1.181 | 45.0000 | 1.771 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$441.96
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6127290 | RQDB2500X5CV | RQDB2500X5CV | KCPM15 | DUO-LOCK | 25.0000 | .9843 | 24.0 | .9449 | 37.5000 | 1.476 | 56.5000 | 2.224 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
List price:
$572.51
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
Discount: %
Replacement
This item is no longer available
Replacement Product Please contact customer service for assistance
Replacement Product Please contact customer service for assistance
Qty
Sold in pkg. of
Grades
-
KCPM15
Coated carbide grade with thick PVD coating and optimized chemistry and process for increased wear resistance. Outstanding protection in milling stainless steel to mitigate crater, DOCN (depth-of-cut notching), and flank wear. Excellent performance up to 52 HRC.
P SteelS High-Temp AlloysH Hardened MaterialsK Cast IronM Stainless Steel
| End Mill Tolerances | |
| D1 | tolerance d11 |
| 10–18 | -0,050/-0,160 |
| 18–30 | -0,065/-0,195 |
RQDB • Metric
| Material Group |  <="" td=""> |  <="" td=""> | short | medium | long | Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%. | |||||||||||||
| A | B | adapter reach | D1 Diameter | ||||||||||||||||
| KCPM15 | KCPM15 | KCPM15 | |||||||||||||||||
| Cutting Speed vc m/min | Cutting Speed vc m/min | Cutting Speed vc m/min | |||||||||||||||||
| ap | ae | ap | Min | Max | Min | Max | Min | Max | mm | 10,0 | 12,0 | 16,0 | 20,0 | 25,0 | |||||
| P | 0 | 1,5 x D | 0,5 x D | 1 x D | 120 | – | 160 | 108 | – | 144 | 108 | – | 144 | fz | 0,061 | 0,070 | 0,086 | 0,097 | 0,105 |
| 1 | 1,5 x D | 0,5 x D | 1 x D | 120 | – | 160 | 108 | – | 144 | 108 | – | 144 | fz | 0,061 | 0,070 | 0,086 | 0,097 | 0,105 | |
| 2 | 1,5 x D | 0,5 x D | 1 x D | 112 | – | 152 | 100,8 | – | 136,8 | 100,8 | – | 136,8 | fz | 0,061 | 0,070 | 0,086 | 0,097 | 0,105 | |
| 3 | 1,5 x D | 0,4 x D | 0,75 x D | 96 | – | 128 | 86,4 | – | 115,2 | 86,4 | – | 115,2 | fz | 0,051 | 0,060 | 0,074 | 0,086 | 0,097 | |
| 4 | 1,5 x D | 0,3 x D | 0,3 x D | 72 | – | 120 | 64,8 | – | 108 | 64,8 | – | 108 | fz | 0,046 | 0,053 | 0,065 | 0,075 | 0,083 | |
| 5 | 1,5 x D | 0,4 x D | 0,75 x D | 48 | – | 80 | 40,8 | – | 68 | 38,4 | – | 64 | fz | 0,041 | 0,048 | 0,059 | 0,069 | 0,077 | |
| M | 1 | 1,5 x D | 0,4 x D | 0,75 x D | 72 | – | 92 | 57,6 | – | 73,6 | 50,4 | – | 64,4 | fz | 0,051 | 0,060 | 0,074 | 0,086 | 0,097 |
| 2 | 1,5 x D | 0,4 x D | 0,75 x D | 48 | – | 64 | 38,4 | – | 51,2 | 33,6 | – | 44,8 | fz | 0,041 | 0,048 | 0,059 | 0,069 | 0,077 | |
| 3 | 1,5 x D | 0,4 x D | 0,75 x D | 48 | – | 56 | 38,4 | – | 44,8 | 33,6 | – | 39,2 | fz | 0,034 | 0,040 | 0,048 | 0,055 | 0,060 | |
| K | 1 | 1,5 x D | 0,5 x D | 1 x D | 96 | – | 120 | 86,4 | – | 108 | 86,4 | – | 108 | fz | 0,061 | 0,070 | 0,086 | 0,097 | 0,105 |
| 2 | 1,5 x D | 0,4 x D | 1 x D | 88 | – | 112 | 79,2 | – | 100,8 | 79,2 | – | 100,8 | fz | 0,051 | 0,060 | 0,074 | 0,086 | 0,097 | |
| 3 | 1,5 x D | 0,4 x D | 1 x D | 88 | – | 104 | 79,2 | – | 93,6 | 79,2 | – | 93,6 | fz | 0,041 | 0,048 | 0,059 | 0,069 | 0,077 | |
| S | 1 | 1,5 x D | 0,4 x D | 0,75 x D | 40 | – | 72 | 32 | – | 57,6 | 24 | – | 43,2 | fz | 0,051 | 0,060 | 0,074 | 0,086 | 0,097 |
| 3 | 1,5 x D | 0,4 x D | 0,75 x D | 20 | – | 32 | 16 | – | 25,6 | 12 | – | 19,2 | fz | 0,027 | 0,032 | 0,039 | 0,046 | 0,052 | |
| H | 1 | 1,5 x D | 0,3 x D | 0,3 x D | 64 | – | 112 | 51,2 | – | 89,6 | 38,4 | – | 67,2 | fz | 0,046 | 0,053 | 0,065 | 0,075 | 0,083 |