Editing Solution
Adding Solution
Solution Name: {{SolutionName}}-
P Steel (7)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(7)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(7)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(7)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(7)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(7)
-
-
M Stainless Steel (7)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(7)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(7)
-
-
K Cast Iron (7)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(7)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(7)
-
-
N Non-Ferrous Materials (7)
-
N1Wrought Aluminum(7)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(7)
-
N4Copper, Brass, Zinc-based on machinability index range of 70-100(7)
-
-
DE (6)
-
Face Milling (7)
-
Pocket (7)
-
Pocket Helical (7)
-
Pocket Milling (7)
-
Ramping (7)
-
Shoulder Milling (7)
-
Shoulder Roughing (7)
-
Shoulder Square End (7)
-
Slot Milling (7)
-
Slot Square End (7)
-
0.079 in (1)
-
0.098 in (2)
-
0.119 in (2)
-
0.138 in (2)
-
2.0 mm (1)
-
2.5 mm (2)
-
3.0 mm (2)
-
3.5 mm (2)
-
3.0 mm (1)
-
4.0 mm (2)
-
6.0 mm (1)
-
7.0 mm (3)
-
0.119 in (1)
-
0.157 in (2)
-
0.237 in (1)
-
0.276 in (3)
-
0.272 in (1)
-
0.307 in (1)
-
0.341 in (1)
-
0.397 in (1)
-
0.433 in (1)
-
0.584 in (1)
-
6.9 mm (1)
-
7.801 mm (1)
-
8.65 mm (1)
-
10.076 mm (1)
-
11.0 mm (1)
-
14.826 mm (1)
SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | First Choice | Adapter Style Machine Side | [D1] Effective Cutting Diameter | [D1] Effective Cutting Diameter | [D] Adapter / Shank / Bore Diameter | [D] Adapter / Shank / Bore Diameter | [AP1MAX] 1st Maximum Cutting Depth | [AP1MAX] 1st Maximum Cutting Depth | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6146957 | 3CH0200DL006B | 3CH0200DL006B | KC633M | Weldon | 2.0000 | .0787 | 6.0 | .2362 | 6.0000 | .2362 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$49.11
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6146890 | 3CH0250DK003B | 3CH0250DK003B | KC633M | Weldon | 2.5000 | .0984 | 6.0 | .2362 | 3.0000 | .1181 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$47.64
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6146958 | 3CH0250DL007B | 3CH0250DL007B | KC633M | Weldon | 2.5000 | .0984 | 6.0 | .2362 | 7.0000 | .2756 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$47.64
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6146891 | 3CH0300DK004B | 3CH0300DK004B | KC633M | Weldon | 3.0000 | .1181 | 6.0 | .2362 | 4.0000 | .1575 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$47.64
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6146959 | 3CH0300DL007B | 3CH0300DL007B | KC633M | Weldon | 3.0000 | .1181 | 6.0 | .2362 | 7.0000 | .2756 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$49.11
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6146892 | 3CH0350DK004B | 3CH0350DK004B | KC633M | Weldon | 3.5000 | .1378 | 6.0 | .2362 | 4.0000 | .1575 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$47.64
/each
Your price:
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6146960 | 3CH0350DL007B | 3CH0350DL007B | KC633M | Weldon | 3.5000 | .1378 | 6.0 | .2362 | 7.0000 | .2756 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$49.11
/each
Your price:
Qty
|
Replacement Product Please contact customer service for assistance
Sold in pkg. of
Grades
-
KC633M
Coated carbide grade with PVD multilayer coating. KC633M™ is designed for dry milling most types of material, apart from the hardened variety. This grade is characterized by high hardness and wear resistance. It provides outstanding protection for solid carbide tools against cratering and abrasion.
P SteelK Cast IronM Stainless SteelN Non-Ferrous
End Mill Tolerances | |||
D1 | tolerance e8 | D | tolerance h6 + / - |
≤ 3 | -0,014 / -0,028 | ≤ 3 | +0 / -0,006 |
3–6 | -0,020 / -0,038 | 3–6 | +0 / -0,008 |
6–10 | -0,025 / -0,047 | 6–10 | +0 / -0,009 |
10–18 | -0,032 / -0,059 | 10–18 | +0 / -0,011 |
18–30 | -0,040 / -0,073 | 18–30 | +0 / -0,013 |
GOmill • GP 3CH..MX • 3 Flute • Long
Side Milling (A) | KC633M | Recommended feed per tooth (fz = mm/th) for side milling (A). | ||||||||||||||||||
A | Cutting Speed vc m/min | D1 Diameter | ||||||||||||||||||
Material Group | ap | ae | Min | Max | mm | 1,0 | 2,0 | 3,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | ||
P | 0 | Ap1 max | 0,1 x D | 150 | – | 200 | fz | 0,007 | 0,014 | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 |
1 | Ap1 max | 0,1 x D | 150 | – | 200 | fz | 0,007 | 0,014 | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | |
2 | Ap1 max | 0,1 x D | 140 | – | 190 | fz | 0,007 | 0,014 | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | |
3 | Ap1 max | 0,1 x D | 120 | – | 160 | fz | 0,006 | 0,011 | 0,017 | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | |
4 | Ap1 max | 0,1 x D | 90 | – | 150 | fz | 0,005 | 0,010 | 0,016 | 0,021 | 0,027 | 0,033 | 0,045 | 0,054 | 0,062 | 0,070 | 0,077 | 0,083 | 0,088 | |
M | 1 | Ap1 max | 0,1 x D | 90 | – | 115 | fz | 0,006 | 0,011 | 0,017 | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 |
2 | Ap1 max | 0,1 x D | 60 | – | 80 | fz | 0,005 | 0,009 | 0,014 | 0,019 | 0,024 | 0,029 | 0,040 | 0,048 | 0,056 | 0,063 | 0,070 | 0,076 | 0,081 | |
K | 1 | Ap1 max | 0,1 x D | 120 | – | 150 | fz | 0,007 | 0,014 | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 |
2 | Ap1 max | 0,1 x D | 110 | – | 140 | fz | 0,006 | 0,011 | 0,017 | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | |
N | 1 | Ap1 max | 0,1 x D | 250 | – | 1000 | fz | 0,010 | 0,020 | 0,030 | 0,040 | 0,050 | 0,060 | 0,080 | 0,100 | 0,120 | 0,140 | 0,160 | 0,180 | 0,200 |
2 | Ap1 max | 0,1 x D | 250 | – | 750 | fz | 0,008 | 0,016 | 0,024 | 0,032 | 0,040 | 0,048 | 0,064 | 0,080 | 0,096 | 0,112 | 0,128 | 0,144 | 0,160 | |
4 | Ap1 max | 0,1 x D | 250 | – | 750 | fz | 0,009 | 0,018 | 0,027 | 0,036 | 0,045 | 0,054 | 0,072 | 0,090 | 0,108 | 0,126 | 0,144 | 0,162 | 0,180 |
Side Milling (A) and Slotting (B) | KC633M | Recommended feed per tooth (fz = mm/th) for side milling (A). For slotting (B), reduce fz by 20%. | |||||||||||||||||||
A | B | Cutting Speed vc m/min | D1 Diameter | ||||||||||||||||||
Material Group | ap | ae | ap | Min | Max | mm | 1,0 | 2,0 | 3,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | ||
P | 0 | Ap1 max | 0,1 x D | 0,5 x D | 150 | – | 200 | fz | 0,007 | 0,014 | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 |
1 | Ap1 max | 0,1 x D | 0,5 x D | 150 | – | 200 | fz | 0,007 | 0,014 | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | |
2 | Ap1 max | 0,1 x D | 0,5 x D | 140 | – | 190 | fz | 0,007 | 0,014 | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 | |
3 | Ap1 max | 0,1 x D | 0,5 x D | 120 | – | 160 | fz | 0,006 | 0,011 | 0,017 | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | |
4 | Ap1 max | 0,1 x D | 0,5 x D | 90 | – | 150 | fz | 0,005 | 0,010 | 0,016 | 0,021 | 0,027 | 0,033 | 0,045 | 0,054 | 0,062 | 0,070 | 0,077 | 0,083 | 0,088 | |
M | 1 | Ap1 max | 0,1 x D | 0,5 x D | 90 | – | 115 | fz | 0,006 | 0,011 | 0,017 | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 |
2 | Ap1 max | 0,1 x D | 0,5 x D | 60 | – | 80 | fz | 0,005 | 0,009 | 0,014 | 0,019 | 0,024 | 0,029 | 0,040 | 0,048 | 0,056 | 0,063 | 0,070 | 0,076 | 0,081 | |
K | 1 | Ap1 max | 0,1 x D | 0,5 x D | 120 | – | 150 | fz | 0,007 | 0,014 | 0,021 | 0,028 | 0,036 | 0,044 | 0,060 | 0,072 | 0,083 | 0,092 | 0,101 | 0,108 | 0,114 |
2 | Ap1 max | 0,1 x D | 0,5 x D | 110 | – | 140 | fz | 0,006 | 0,011 | 0,017 | 0,023 | 0,030 | 0,036 | 0,050 | 0,061 | 0,070 | 0,079 | 0,087 | 0,095 | 0,101 | |
N | 1 | Ap1 max | 0,1 x D | 0,5 x D | 250 | – | 1000 | fz | 0,010 | 0,020 | 0,030 | 0,040 | 0,050 | 0,060 | 0,080 | 0,100 | 0,120 | 0,140 | 0,160 | 0,180 | 0,200 |
2 | Ap1 max | 0,1 x D | 0,5 x D | 250 | – | 750 | fz | 0,008 | 0,016 | 0,024 | 0,032 | 0,040 | 0,048 | 0,064 | 0,080 | 0,096 | 0,112 | 0,128 | 0,144 | 0,160 | |
4 | Ap1 max | 0,1 x D | 0,5 x D | 250 | – | 750 | fz | 0,009 | 0,018 | 0,027 | 0,036 | 0,045 | 0,054 | 0,072 | 0,090 | 0,108 | 0,126 | 0,144 | 0,162 | 0,180 |