Kenloc™ • Negative Inserts • DNGA

Grades

• K060
• K090

  K090

• 
  K68

  Composition: A hard, low binder content, alloyed grade WC/Co fine-grain grade.
  Application: The K68 grade has excellent abrasion resistance for machining cast irons, austenitic stainless steels, non-ferrous metals, non-metals, and as an alternative to the K313 grade on most high-temperature alloys. Use as a general-purpose grade for non-ferrous materials.

  S High-Temp Alloys

  N Non-Ferrous
• KC210
• KC810

  KC810

• KC850

  composition: A CVD tri-phase coating on an extra-strong, cobalt-enriched
  alloyed substrate.
  application: Designed for heavy cutting of low-, medium-, and high-carbon
  steels, medium hardness alloy and tool steels, stainless steels, and some
  high-temperature alloys. Excellent thermal and mechanical shock resistance
  makes grade KC850 ideally suited for difficult drilling applications.
  Used in inserts for Kendex/Metcut drill bodies.
  

  P Steel

  M Stainless Steel
• KC910
• 
  KC9110

  Composition: Specially engineered, cobalt-enriched carbide grade with thick K-MTCVD-TiCN coating layer, an Al2O3 layer of controlled grain size, and outer layers of TiCN and TiN for maximum abrasion and wear resistance for high-speed machining.
  Application: An excellent finishing to medium machining grade for a variety of workpiece materials including most steels, ferritic and martensitic stainless steels, and cast irons. A balanced combination of deformation resistance and edge toughness. The smooth coating resists built-up edge and microchipping. For rougher cutting, use the KC9125 grade.

• KC9120
• KC950

  KC950

• KC990
• KD050

  PCBN (Polycrystalline cubic boron nitride
  With ceramic binder and low PCBN content
  Finishing of hardened steel up to 65 HRC
  For higher cutting speeds
  For operations requiring high demensional consistency
  

• KD081

  composition: A low content, PCBN tip brazed onto a carbide insert.
  application: Designed for roughing to finishing of hardened steels
  (>45 HRC). Use on bearing steel, hot and cold work tool steels, highspeed
  steels, die steels, case hardened steels, carburized and nitrided
  irons, and some hard coatings.
  

• KD100

  composition: A polycrystalline diamond tip (PCD) brazed onto a
  carbide substrate.
  application: The KD100 grade is for general purpose turning. The
  cutting tool material contains a binder in addition to diamond
  particles. This makes the KD100 grade suitable for roughing to
  finishing all types of highly abrasive workpieces, including non-ferrous
  metals and non-metallics. Use as your first choice on high content
  silicon aluminum alloys (hypereutectic). Will generally produce good
  surface finishes. Provides the best mechanical shock resistance of the
  diamond tool materials. The cutting edge is sharp. This grade operates
  at very high speeds.
  

• KD120

  composition: A high CBN content, PCBN tip brazed onto a carbide insert.
  application: The primary application area for high CBN content grades
  is in roughing to finishing of fully pearlitic gray cast iron, chilled irons,
  high chrome alloys steels, sintered powdered metals, and heavy cuts in
  hardened steels (>45 HRC). Also use for finishing chilled cast iron and
  fully pearlitic cast iron. Do not apply on finishing cuts in hardened
  steels. Available in regular size tips.
  

• 
  KD1405

  Composition: A pure CVD-deposited diamond-sheet tool brazed directly to a carbide substrate.
  Application: KD1405™ is the best Kennametal abrasion-resistant tool material for non-ferrous and non-metallic materials. Best applied when abrasion resistance is the desired benefit.

  S High-Temp Alloys

  N Non-Ferrous
• KY1320

  composition: An uncoated, advanced, silicon nitride grade
  application: High-speed roughing to finishing of gray cast iron.
  The KY1320 grade, with better wear resistance, is an ideal compliment to
  the KY3500 grade.
  

• KY1540

  composition: The KY1540 ceramic is the latest and most advanced
  sialon material ever developed.
  application: Combines excellent wear properties, fracture toughness,
  and thermal shock resistance for general purpose to finish machining
  of high-temperature alloys. Provides superior depth-of-cut notch
  resistance as compared to whisker ceramics.
  

  S High-Temp Alloys
• 
  KY1615

  Composition: An advanced Alumina/TiC black ceramic grade.
  Application: Great combination of toughness and wear resistance; used for machining alloy steels, tool steels, and stainless steels to 60 HRC (653 HB). It is also applied in finish turning and boring of cast irons.

  H Hardened Materials
• KY2000

  KY2000

• 
  KY2100

  PLEASE PROVIDE INFORMATION

• KY3000
• KY3400

  composition: CVD-coated pure silicon nitride grade.
  application: Excellent combination of toughness and edge wear
  resistance; used for general purpose machining of gray cast irons
  and ductile or nodular cast irons.
  

• 
  KY3500

  A ceramic cutting material based on micro-grain Si3N4 primarily for use in light to general machining of gray cast iron and ferritic ductile cast iron. Dry machining is preferred while using this grade.

  K Cast Iron
• 
  KY4300

  An Al2O3 matrix reinforced with SiC whiskers for excellent toughness suited for machining high-temperature and ferrous alloys with a high Brinell hardness.

  S High-Temp Alloys
• 
  KY4400

  Composition: A PVD TiN coating over an aluminium oxide and titanium carbonitride composite ceramic (Al2O3/TiCN).
  Application: Used for finish turning of hardened steels and irons (greater than 45 HRC). Where possible, use under dry conditions in smooth or varied depths of cut. Can also be applied in finish turning of nickel alloys, cobalt alloys, and powder metals.

  H Hardened Materials
• 
  KYHK15B

  Composition: A PVD coated mixed aluminum oxide composite ceramic (Al2O3) with embedded fine-grained titanium carbonitride (TiCN).
  Application: KYHK15B is suitable for turning hardened steels (45 HRC–60 HRC), finishing of cast irons and high temperature alloys. This advanced ceramic offers maximum edge strength and excellent wear resistance by achieving performance to compete with CBN.

  S High-Temp Alloys

  H Hardened Materials

  K Cast Iron
• 
  KYK10

  Composition: An advanced SiAlON ceramic grade.
  Application: Provides maximum wear resistance. Used for high-speed continuous turning of gray cast iron, including through scale. To be used for varying cast iron machinability.

  K Cast Iron
• 
  KYK25

  Composition: Pure silicon nitride ceramic with an alumina CVD coating.
  Application: Excellent combination of toughness and edge wear resistance. Used for general purpose machining of gray, ductile, or nodular cast irons. To be used for varying cast iron machinability.

  K Cast Iron
• KYK35

  Composition: Pure silicon nitride grade.
  Application: Maximum toughness; used at high feed rates for rough machining of grey cast iron,
  including machining through interruptions.
  

• 
  KYS25

  Composition: SiAlON ceramic with a multi-layered alumina-TiCN CVD coating.
  Application: Compliments the KYS30 grade when machining high-temp and nickel-based alloys and cast materials with high Brinell hardness. This advanced CVD coating provides excellent chemical and depth-of-cut notch resistance compared to whisker ceramics.

  S High-Temp Alloys
• 
  KYS30

  KYS30™ is the latest in the line of α/βSiAlON grades for general purpose to finish machining of high-temperature alloys. This grade provides excellent wear characteristics, with better toughness and thermal shock resistance than whisker ceramics. KYS30 also gives improved thermal stability.

  S High-Temp Alloys