KenTIP™ FS Round Shank Bodies
KenTIP™ FS Round Shank Bodies
KenTIP™ FS Round Shank Bodies
KenTIP™ FS Round Shank Bodies

KenTIP™ FS Bodies • 5 x D • Straight Round Shank • Metric

KenTIP™ FS Round Shank Bodies

Features and benefits

  • KenTIP FS Tool Holder with Straight Cylindrical Round shank. Metric Shank.

  • KenTIP FS modular drills offer performance commonly achieved with solid carbide drills. The rigid pocket seat allows flexible usage and very high holder tool life.

  • KenTIP FS drilling system uses disposable inserts — no reconditioning cost, consistent performance, and significantly reduced tool logistics compared to regrindable drilling solutions.

  • MuliCoolant provides an advanced coolant channel layout with four coolant exits in each holder.

  • Each Tool body is shipped with related insert wrench.

Uses and application

  • Shank - Cylindrical  Plain ≤h6Shank - Cylindrical Plain ≤h6
  • Drilling - Through CoolantDrilling - Through Coolant

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
C CFRP Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (24)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (24)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (24)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (24)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (24)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (24)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (24)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (24)
  • M Stainless Steel (24)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (24)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (24)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (24)
  • K Cast Iron (24)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (24)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (24)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (24)
  • N Non-Ferrous Materials (11)
    • N1
      Wrought Aluminum
      (11)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (11)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (11)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (11)
  • C CFRP Materials (5)
    • C1
      CFRP, CFRP / CFRP
      (5)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous
      (5)
    • C3
      CFRP / Titanium CFRP / High Temp
      (5)
    • C4
      CFRP / Stainless Steel
      (5)
Select First Choice
  • CN (19)
  • DE (19)
  • GB (1)
  • US (19)
Applications
  • Convex Drilling Convex Drilling (24)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (24)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (24)
  • Counterboring Counterboring (24)
  • Countersinking Countersinking (24)
  • Drilling Drilling (24)
  • Flat Bottom Drilling Flat Bottom Drilling (24)
  • Inclined Entry Drilling Inclined Entry Drilling (24)
  • Inclined Exit Drilling Inclined Exit Drilling (24)
  • Pre-Condition Pre-Condition (24)
  • Stacked Plates Drilling Stacked Plates Drilling (24)
  • X-Offset Drilling X-Offset Drilling (24)
Cutting Diameter
  • 6.0 (1)
  • 6.1 (1)
  • 6.2 (1)
  • 6.3 (1)
  • 6.35 (1)
  • 6.4 (1)
  • 6.5 (1)
  • 6.53 (1)
  • 6.6 (1)
  • 6.629 (1)
  • 6.7 (1)
  • 6.746 (1)
  • 6.8 (1)
  • 6.9 (1)
  • 6.909 (1)
  • 7.0 (1)
  • 7.1 (1)
  • 7.145 (1)
  • 7.2 (1)
  • 7.3 (1)
  • 7.366 (1)
  • 7.4 (1)
  • 7.5 (1)
  • 7.541 (1)
  • 7.6 (1)
  • 7.7 (1)
  • 7.8 (1)
  • 7.9 (1)
  • 7.938 (1)
  • 8.0 (1)
  • 8.1 (1)
  • 8.164 (1)
  • 8.204 (1)
  • 8.3 (1)
  • 8.334 (1)
  • 8.4 (1)
  • 8.433 (1)
  • 8.5 (1)
  • 8.52 (1)
  • 8.6 (1)
  • 8.611 (1)
  • 8.7 (1)
  • 8.732 (1)
  • 8.8 (1)
  • 8.839 (1)
  • 8.9 (1)
  • 9.0 (1)
  • 9.093 (1)
  • 9.1 (1)
  • 9.129 (1)
  • 9.2 (1)
  • 9.3 (1)
  • 9.347 (1)
  • 9.4 (1)
  • 9.5 (1)
  • 9.525 (1)
  • 9.558 (1)
  • 9.6 (1)
  • 9.7 (1)
  • 9.8 (1)
  • 9.9 (1)
  • 9.921 (1)
  • 10.0 (1)
  • 10.023 (1)
  • 10.084 (1)
  • 10.1 (1)
  • 10.2 (1)
  • 10.262 (1)
  • 10.3 (1)
  • 10.32 (1)
  • 10.4 (1)
  • 10.49 (1)
  • 10.5 (1)
  • 10.6 (1)
  • 10.7 (1)
  • 10.716 (1)
  • 10.8 (1)
  • 10.9 (1)
  • 11.0 (1)
  • 11.1 (1)
  • 11.112 (1)
  • 11.113 (1)
  • 11.2 (1)
  • 11.3 (1)
  • 11.4 (1)
  • 11.5 (1)
  • 11.509 (1)
  • 11.6 (1)
  • 11.7 (1)
  • 11.8 (1)
  • 11.9 (1)
  • 11.908 (1)
  • 12.0 (1)
  • 12.1 (1)
  • 12.2 (1)
  • 12.304 (1)
  • 12.4 (1)
  • 12.474 (1)
  • 12.5 (1)
  • 12.6 (1)
  • 12.7 (1)
  • 12.8 (1)
  • 12.9 (1)
  • 13.0 (1)
  • 13.096 (1)
  • 13.2 (1)
  • 13.28 (1)
  • 13.3 (1)
  • 13.38 (1)
  • 13.4 (1)
  • 13.492 (1)
  • 13.5 (1)
  • 13.6 (1)
  • 13.7 (1)
  • 13.8 (1)
  • 13.891 (1)
  • 13.896 (1)
  • 13.94 (1)
  • 14.0 (1)
  • 14.1 (1)
  • 14.2 (1)
  • 14.288 (1)
  • 14.3 (1)
  • 14.4 (1)
  • 14.5 (1)
  • 14.6 (1)
  • 14.666 (1)
  • 14.684 (1)
  • 14.7 (1)
  • 14.8 (1)
  • 14.9 (1)
  • 15.0 (1)
  • 15.082 (1)
  • 15.1 (1)
  • 15.2 (1)
  • 15.3 (1)
  • 15.38 (1)
  • 15.4 (1)
  • 15.479 (1)
  • 15.5 (1)
  • 15.6 (1)
  • 15.7 (1)
  • 15.8 (1)
  • 15.875 (1)
  • 15.9 (1)
  • 16.0 (1)
  • 16.027 (1)
  • 16.08 (1)
  • 16.1 (1)
  • 16.104 (1)
  • 16.15 (1)
  • 16.2 (1)
  • 16.271 (1)
  • 16.3 (1)
  • 16.4 (1)
  • 16.5 (1)
  • 16.55 (1)
  • 16.6 (1)
  • 16.67 (1)
  • 16.7 (1)
  • 16.8 (1)
  • 16.9 (1)
  • 17.0 (1)
  • 17.066 (1)
  • 17.1 (1)
  • 17.2 (1)
  • 17.3 (1)
  • 17.4 (1)
  • 17.462 (2)
  • 17.48 (1)
  • 17.5 (1)
  • 17.55 (1)
  • 17.6 (1)
  • 17.7 (1)
  • 17.8 (1)
  • 17.859 (1)
  • 17.9 (1)
  • 18.0 (1)
  • 18.1 (1)
  • 18.2 (1)
  • 18.258 (1)
  • 18.3 (1)
  • 18.4 (1)
  • 18.5 (1)
  • 18.6 (1)
  • 18.654 (1)
  • 18.7 (1)
  • 18.8 (1)
  • 18.9 (1)
  • 19.0 (1)
  • 19.05 (1)
  • 19.1 (1)
  • 19.2 (1)
  • 19.228 (1)
  • 19.253 (1)
  • 19.279 (1)
  • 19.3 (1)
  • 19.355 (1)
  • 19.4 (1)
  • 19.446 (1)
  • 19.46 (1)
  • 19.5 (1)
  • 19.6 (1)
  • 19.7 (1)
  • 19.8 (1)
  • 19.845 (1)
  • 19.85 (1)
  • 19.9 (1)
to
Cutting Diameter
  • 0.2362 (1)
  • 0.2402 (1)
  • 0.2441 (1)
  • 0.248 (1)
  • 0.25 (1)
  • 0.252 (1)
  • 0.2559 (1)
  • 0.2571 (1)
  • 0.2598 (1)
  • 0.261 (1)
  • 0.2638 (1)
  • 0.2656 (1)
  • 0.2677 (1)
  • 0.2717 (1)
  • 0.272 (1)
  • 0.2756 (1)
  • 0.2795 (1)
  • 0.2813 (1)
  • 0.2835 (1)
  • 0.2874 (1)
  • 0.29 (1)
  • 0.2913 (1)
  • 0.2953 (1)
  • 0.2969 (1)
  • 0.2992 (1)
  • 0.3031 (1)
  • 0.3071 (1)
  • 0.311 (1)
  • 0.3125 (1)
  • 0.3145 (1)
  • 0.315 (1)
  • 0.3189 (1)
  • 0.3214 (1)
  • 0.323 (1)
  • 0.3268 (1)
  • 0.3281 (1)
  • 0.3307 (1)
  • 0.332 (1)
  • 0.3346 (1)
  • 0.3354 (1)
  • 0.3386 (1)
  • 0.339 (1)
  • 0.3425 (1)
  • 0.3438 (1)
  • 0.3465 (1)
  • 0.348 (1)
  • 0.3504 (1)
  • 0.3543 (1)
  • 0.358 (1)
  • 0.3583 (1)
  • 0.3594 (1)
  • 0.3622 (1)
  • 0.3661 (1)
  • 0.368 (1)
  • 0.3701 (1)
  • 0.374 (1)
  • 0.375 (1)
  • 0.3763 (1)
  • 0.378 (1)
  • 0.3819 (1)
  • 0.3858 (1)
  • 0.3898 (1)
  • 0.3906 (1)
  • 0.3937 (1)
  • 0.3946 (1)
  • 0.397 (1)
  • 0.3976 (1)
  • 0.4016 (1)
  • 0.404 (1)
  • 0.4055 (1)
  • 0.4063 (1)
  • 0.4094 (1)
  • 0.413 (1)
  • 0.4134 (1)
  • 0.4173 (1)
  • 0.4213 (1)
  • 0.4219 (1)
  • 0.4252 (1)
  • 0.4291 (1)
  • 0.4331 (1)
  • 0.437 (1)
  • 0.4375 (1)
  • 0.4409 (1)
  • 0.4449 (1)
  • 0.4488 (1)
  • 0.4528 (1)
  • 0.4531 (1)
  • 0.4567 (1)
  • 0.4606 (1)
  • 0.4646 (1)
  • 0.4685 (1)
  • 0.4688 (1)
  • 0.4724 (1)
  • 0.4764 (1)
  • 0.4803 (1)
  • 0.4844 (1)
  • 0.4882 (1)
  • 0.4911 (1)
  • 0.4921 (1)
  • 0.4961 (1)
  • 0.5 (1)
  • 0.5039 (1)
  • 0.5079 (1)
  • 0.5118 (1)
  • 0.5156 (1)
  • 0.5197 (1)
  • 0.5228 (1)
  • 0.5236 (1)
  • 0.5268 (1)
  • 0.5276 (1)
  • 0.5312 (1)
  • 0.5315 (1)
  • 0.5354 (1)
  • 0.5394 (1)
  • 0.5433 (1)
  • 0.5469 (1)
  • 0.5471 (1)
  • 0.5488 (1)
  • 0.5512 (1)
  • 0.5551 (1)
  • 0.5591 (1)
  • 0.5625 (1)
  • 0.563 (1)
  • 0.5669 (1)
  • 0.5709 (1)
  • 0.5748 (1)
  • 0.5774 (1)
  • 0.5781 (1)
  • 0.5787 (1)
  • 0.5827 (1)
  • 0.5866 (1)
  • 0.5906 (1)
  • 0.5938 (1)
  • 0.5945 (1)
  • 0.5984 (1)
  • 0.6024 (1)
  • 0.6055 (1)
  • 0.6063 (1)
  • 0.6094 (1)
  • 0.6102 (1)
  • 0.6142 (1)
  • 0.6181 (1)
  • 0.622 (1)
  • 0.625 (1)
  • 0.626 (1)
  • 0.6299 (1)
  • 0.631 (1)
  • 0.6331 (1)
  • 0.6339 (1)
  • 0.634 (1)
  • 0.6358 (1)
  • 0.6378 (1)
  • 0.6406 (1)
  • 0.6417 (1)
  • 0.6457 (1)
  • 0.6496 (1)
  • 0.6516 (1)
  • 0.6535 (1)
  • 0.6563 (1)
  • 0.6575 (1)
  • 0.6614 (1)
  • 0.6654 (1)
  • 0.6693 (1)
  • 0.6719 (1)
  • 0.6732 (1)
  • 0.6772 (1)
  • 0.6811 (1)
  • 0.685 (1)
  • 0.6875 (2)
  • 0.6882 (1)
  • 0.689 (1)
  • 0.6909 (1)
  • 0.6929 (1)
  • 0.6969 (1)
  • 0.7008 (1)
  • 0.7031 (1)
  • 0.7047 (1)
  • 0.7087 (1)
  • 0.7126 (1)
  • 0.7165 (1)
  • 0.7188 (1)
  • 0.7205 (1)
  • 0.7244 (1)
  • 0.7283 (1)
  • 0.7323 (1)
  • 0.7344 (1)
  • 0.7362 (1)
  • 0.7402 (1)
  • 0.7441 (1)
  • 0.748 (1)
  • 0.75 (1)
  • 0.752 (1)
  • 0.7559 (1)
  • 0.757 (1)
  • 0.758 (1)
  • 0.759 (1)
  • 0.7598 (1)
  • 0.762 (1)
  • 0.7638 (1)
  • 0.7656 (1)
  • 0.7661 (1)
  • 0.7677 (1)
  • 0.7717 (1)
  • 0.7756 (1)
  • 0.7795 (1)
  • 0.7813 (1)
  • 0.7815 (1)
  • 0.7835 (1)
to
Maximum Hole Depth [L4]
  • 1.26 (1)
  • 1.299 (1)
  • 1.378 (1)
  • 1.496 (1)
  • 1.575 (1)
  • 1.693 (1)
  • 1.772 (1)
  • 1.89 (1)
  • 1.969 (1)
  • 2.087 (1)
  • 2.165 (1)
  • 2.283 (1)
  • 2.362 (1)
  • 2.48 (1)
  • 2.559 (1)
  • 2.677 (1)
  • 2.756 (1)
  • 2.874 (1)
  • 2.953 (1)
  • 3.15 (1)
  • 3.346 (1)
  • 3.543 (1)
  • 3.74 (1)
  • 3.937 (1)
to
Maximum Hole Depth [L4]
  • 32.0 (1)
  • 33.0 (1)
  • 35.0 (1)
  • 38.0 (1)
  • 40.0 (1)
  • 43.0 (1)
  • 45.0 (1)
  • 48.0 (1)
  • 50.0 (1)
  • 53.0 (1)
  • 55.0 (1)
  • 58.0 (1)
  • 60.0 (1)
  • 63.0 (1)
  • 65.0 (1)
  • 68.0 (1)
  • 70.0 (1)
  • 73.0 (1)
  • 75.0 (1)
  • 80.0 (1)
  • 85.0 (1)
  • 90.0 (1)
  • 95.0 (1)
  • 100.0 (1)
to
Reach
  • 40.1 (1)
  • 41.2 (1)
  • 43.1 (1)
  • 46.6 (1)
  • 49.1 (1)
  • 52.7 (1)
  • 55.2 (1)
  • 58.7 (1)
  • 61.2 (1)
  • 64.7 (1)
  • 67.1 (1)
  • 70.6 (1)
  • 73.0 (1)
  • 76.5 (1)
  • 78.9 (1)
  • 82.4 (1)
  • 84.8 (1)
  • 88.8 (1)
  • 90.9 (1)
  • 96.1 (1)
  • 102.0 (1)
  • 109.3 (1)
  • 114.3 (1)
  • 119.5 (1)
to
Reach
  • 1.579 (1)
  • 1.622 (1)
  • 1.697 (1)
  • 1.835 (1)
  • 1.933 (1)
  • 2.075 (1)
  • 2.173 (1)
  • 2.311 (1)
  • 2.409 (1)
  • 2.547 (1)
  • 2.642 (1)
  • 2.78 (1)
  • 2.874 (1)
  • 3.012 (1)
  • 3.106 (1)
  • 3.244 (1)
  • 3.339 (1)
  • 3.496 (1)
  • 3.579 (1)
  • 3.783 (1)
  • 4.016 (1)
  • 4.303 (1)
  • 4.5 (1)
  • 4.705 (1)
to
Connection Style
  • Straight-Cylindrical (24)
Number of Flutes
  • 2 (24)
Cutting Edges Per Insert
  • 0.0 (24)
to
Application
Grade Of Cutting Tool
  • KC7410 (24)
  • KCC10 (5)
  • KCMS15 (24)
  • KCP15A (24)
  • KN15 (11)
Hand Of Tool
  • R (24)
Drill Type
  • 86-01 (24)
Front-End
Insert Shape
  • KENTIP FUSION DRILL (24)
Point Angle
  • 128.0 (11)
  • 140.0 (24)
  • 143.0 (24)
  • 180.0 (24)
to
Back-End
Connection Type
  • CYLINDRICAL (24)
Back-End Diameter
  • 0.315 (5)
  • 0.3937 (4)
  • 0.4724 (4)
  • 0.5512 (4)
  • 0.6299 (4)
  • 0.7874 (3)
to
Back-End Diameter
  • 8.0 (5)
  • 10.0 (4)
  • 12.0 (4)
  • 14.0 (4)
  • 16.0 (4)
  • 20.0 (3)
to
other
Platform
  • KenTIP FS (24)
Tool Unit
  • M (24)
Over All Length [L]
  • 80.0 (1)
  • 81.0 (1)
  • 84.0 (1)
  • 87.0 (1)
  • 89.0 (1)
  • 98.0 (1)
  • 100.0 (1)
  • 103.0 (1)
  • 105.0 (1)
  • 115.0 (1)
  • 117.0 (1)
  • 120.0 (1)
  • 122.0 (1)
  • 127.0 (1)
  • 129.0 (1)
  • 132.0 (1)
  • 134.0 (1)
  • 141.0 (1)
  • 143.0 (1)
  • 148.0 (1)
  • 153.0 (1)
  • 163.0 (1)
  • 168.0 (1)
  • 173.0 (1)
to
Over All Length [L]
  • 3.1496 (1)
  • 3.189 (1)
  • 3.3071 (1)
  • 3.4252 (1)
  • 3.5039 (1)
  • 3.8583 (1)
  • 3.937 (1)
  • 4.0551 (1)
  • 4.1339 (1)
  • 4.5276 (1)
  • 4.6063 (1)
  • 4.7244 (1)
  • 4.8031 (1)
  • 5.0 (1)
  • 5.0787 (1)
  • 5.1969 (1)
  • 5.2756 (1)
  • 5.5512 (1)
  • 5.6299 (1)
  • 5.8268 (1)
  • 6.0236 (1)
  • 6.4173 (1)
  • 6.6142 (1)
  • 6.811 (1)
to
obsoleteFacet
  • false (24)
  • true (24)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 24 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Adapter Style Machine Side [D1] Drill Diameter M [D1] Drill Diameter M [D1MAX] Drill Diameter Maximum [D1MAX] Drill Diameter Maximum [LATTH] Insert Attach LG Holder [LATTH] Insert Attach LG Holder [L] Overall Length [L] Overall Length [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [SSC] Insert Seat Size