KOR5™ <sup>DS</sup> • 5 Flutes • 3 x D • Weldon® Shank
KOR5™ <sup>DS</sup> • 5 Flutes • 3 x D • Weldon® Shank
KOR5™ <sup>DS</sup> • 5 Flutes • 3 x D • Weldon® Shank
KOR5™ <sup>DS</sup> • 5 Flutes • 3 x D • Weldon® Shank

KOR5™ DS • 5 Flutes • 3 x D • Weldon® Shank • Metric

KOR5™ DS • 5 Flutes • 3 x D • Weldon® Shank

Uses and application

  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • Tool Dimensions: Flute Configuration: 5Tool Dimensions: Flute Configuration: 5
  • Corner Style: Corner RadiusCorner Style: Corner Radius
  • Trochoidal MillingTrochoidal Milling
  • Helix Angle: 40°Helix Angle: 40°
  • Shank - Cylindrical  WeldonShank - Cylindrical Weldon
  • Ramping: 5°Ramping: 5°

Workpiece Materials

P
M
K
S
H
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
  • P Steel (6)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (6)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (6)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (6)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (6)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (6)
  • M Stainless Steel (6)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (6)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (6)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (6)
  • K Cast Iron (6)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (6)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (6)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (6)
  • S High-Temp Alloys (6)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (6)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (6)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (6)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (6)
  • H Hardened Materials (6)
    • H1
      Hardened Materials 44-48 HRC
      (6)
    • H2
      Hardened Materials 48-55 HRC
      (6)
Applications
  • Pocket Helical Pocket Helical (6)
  • Pocket Milling Pocket Milling (6)
  • Shoulder Milling Shoulder Milling (6)
  • Shoulder Square End Shoulder Square End (6)
  • Trochoidal Milling Trochoidal Milling (6)
Cutting Diameter
  • 8.0 (1)
  • 10.0 (1)
  • 12.0 (1)
  • 16.0 (1)
  • 20.0 (1)
  • 25.0 (1)
to
Cutting Diameter
  • 0.315 (1)
  • 0.3937 (1)
  • 0.4724 (1)
  • 0.6299 (1)
  • 0.7874 (1)
  • 0.9843 (1)
to
Cutting Length
  • 0.9449 (1)
  • 1.1811 (1)
  • 1.4173 (1)
  • 1.8898 (1)
  • 2.3622 (1)
  • 2.9528 (1)
to
Cutting Length
  • 24.0 (1)
  • 30.0 (1)
  • 36.0 (1)
  • 48.0 (1)
  • 60.0 (1)
  • 75.0 (1)
to
Tool Cutting Edge Angle
  • 90.0 (6)
to
Corner configuration
Corner Radius
  • 0.5 (2)
  • 0.75 (1)
  • 1.0 (3)
to
Corner Radius
  • 0.0197 (2)
  • 0.0295 (1)
  • 0.0394 (3)
to
Corner Chamfer
  • 0.0 (6)
to
Corner Chamfer
  • 0.0 (6)
to
Application
Grade Of Cutting Tool
  • KC643M (6)
Back-End
Back-End Diameter
  • 0.315 (1)
  • 0.3937 (1)
  • 0.4724 (1)
  • 0.6299 (1)
  • 0.7874 (1)
  • 0.9843 (1)
to
Back-End Diameter
  • 8.0 (1)
  • 10.0 (1)
  • 12.0 (1)
  • 16.0 (1)
  • 20.0 (1)
  • 25.0 (1)
to
other
Grade
  • KC643M (6)
Platform
  • KOR5 (6)
Tool Unit
  • M (6)
Over All Length [L]
  • 67.0 (1)
  • 80.0 (1)
  • 100.0 (1)
  • 110.0 (1)
  • 125.0 (1)
  • 150.0 (1)
to
Over All Length [L]
  • 2.6378 (1)
  • 3.1496 (1)
  • 3.937 (1)
  • 4.3307 (1)
  • 4.9213 (1)
  • 5.9055 (1)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 6 of 6 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Re] Corner Radius [Re] Corner Radius
6763986 KOR5RA0800R024HBR050CM KOR5RA0800R024HBR050CM KC643M Weldon 8.0000 .3150 8.0 .315 24.0000 .9449 67.0000 2.637 0.5000 .0197
    6763987 KOR5RA1000R030HBR050CM KOR5RA1000R030HBR050CM KC643M Weldon 10.0000 .3937 10.0 .3937 30.0000 1.181 80.0000 3.149 0.5000 .0197
      6763988 KOR5RA1200R036HBR075CM KOR5RA1200R036HBR075CM KC643M Weldon 12.0000 .4724 12.0 .4724 36.0000 1.417 100.0000 3.937 0.7500 .0295
        6763989 KOR5RA1600R048HBR100CM KOR5RA1600R048HBR100CM KC643M Weldon 16.0000 .6299 16.0 .6299 48.0000 1.889 110.0000 4.330 1.0000 .0394
          6763992 KOR5RA2000R060HBR100CM KOR5RA2000R060HBR100CM KC643M Weldon 20.0000 .7874 20.0 .7874 60.0000 2.362 125.0000 4.921 1.0000 .0394
            6763993 KOR5RA2500R075HBR100CM KOR5RA2500R075HBR100CM KC643M Weldon 25.0000 .9843 25.0 .9843 75.0000 2.952 150.0000 5.905 1.0000 .0394
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Grades

              • KC643M

                Coated fine-grain grade with PVD (AlTiN). KC643M is a hard PVD coating particularly suitable for cutting steel, cast iron, stainless steel (wet), and titanium (wet). This grade can be used for materials with hardness up to 52 HRC.

                P
                M
                K
                S
                H

              KOR5™ DS • 5 Flutes • 3 x D • Adjustment factor table for feed calculation • Metric

              If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
              You are about to create a duplicate . Do you want to proceed?
              You are about to delete Do you want to proceed?
              What would you like to rename your to?
              Please enter a valid name
              Please enter a name for the duplicate
              Please enter a valid name
              You are about to add to your My Solutions page. Do you want to proceed?
              Please enter a valid name
              Send a copy of

              Please enter a valid Email
              Please enter a valid name

              We have found the following CAD Drawings

              Select the files you are looking for and download them all at once

              You should be logged to see your dashboard information
              The product/s () you were trying to add to the cart is/are not available, please contact customer service.
              item(s) successfully added to the cart
              View Cart