Product Suggestions

Product Family suggestions

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu
Need Help? Contact an Expert site stretcher close
EXIT SEARCH
Back to Solution
Modular Drilling • Carbide Insert for KSEM™
Modular Drilling • Carbide Insert for KSEM™
Modular Drilling • Carbide Insert for KSEM™
Modular Drilling • Carbide Insert for KSEM™
Modular Drilling • Carbide Insert for KSEM™
Modular Drilling • Carbide Insert for KSEM™

KSEM™ • Center Insert • HPL Geometry

Modular Drilling • Carbide Insert for KSEM™

Features and benefits

  • HPL geometry for modular drilling stainless steels.

  • The innovative cutting geometry creates two chips in each chip flute for perfect chip evacuation.

Uses and application

  • DrillingDrilling
  • Drilling: Inclined ExitDrilling: Inclined Exit
  • Tool Dimensions: 2flute/2margin/coolantTool Dimensions: 2flute/2margin/coolant
  • Drilling: Stacked PlatesDrilling: Stacked Plates

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
Modular Drilling • Carbide Insert for KSEM™
Filters and Columns
Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (124)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (124)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (124)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (124)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (124)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (124)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (124)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (124)
  • M Stainless Steel (124)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (124)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (124)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (124)
  • K Cast Iron (124)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (124)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (124)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (124)
  • N Non-Ferrous Materials (124)
    • N1
      Wrought Aluminum
      (124)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (124)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (124)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (124)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (124)
    • N6
      Carbon, Graphite Composites, CFRP
      (124)
    • N7
      MMC's
      (124)
  • S High-Temp Alloys (124)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (124)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (124)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (124)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (124)
Select First Choice
  • BR (1)
  • CN (30)
  • DE (35)
  • GB (24)
  • IN (5)
  • SG (21)
  • US (28)
Cutting Diameter
Cutting Diameter
  • 0.492 in (1)
  • 0.5 in (1)
  • 0.504 in (1)
  • 0.509 in (1)
  • 0.512 in (1)
  • 0.516 in (1)
  • 0.531 in (1)
  • 0.535 in (1)
  • 0.543 in (1)
  • 0.551 in (1)
  • 0.555 in (1)
  • 0.557 in (1)
  • 0.559 in (1)
  • 0.564 in (1)
  • 0.572 in (1)
  • 0.576 in (1)
  • 0.578 in (1)
  • 0.583 in (1)
  • 0.591 in (1)
  • 0.594 in (1)
  • 0.609 in (1)
  • 0.61 in (1)
  • 0.614 in (1)
  • 0.625 in (1)
  • 0.63 in (1)
  • 0.634 in (2)
  • 0.636 in (1)
  • 0.638 in (1)
  • 0.641 in (1)
  • 0.65 in (1)
  • 0.656 in (1)
  • 0.669 in (1)
  • 0.672 in (1)
  • 0.687 in (1)
  • 0.69 in (1)
  • 0.7 in (1)
  • 0.702 in (1)
  • 0.704 in (1)
  • 0.709 in (1)
  • 0.719 in (1)
  • 0.728 in (1)
  • 0.732 in (1)
  • 0.734 in (1)
  • 0.744 in (1)
  • 0.748 in (1)
  • 0.75 in (1)
  • 0.756 in (1)
  • 0.757 in (1)
  • 0.758 in (1)
  • 0.759 in (1)
  • 0.762 in (1)
  • 0.766 in (1)
  • 0.768 in (1)
  • 0.781 in (1)
  • 0.787 in (1)
  • 0.791 in (1)
  • 0.797 in (1)
  • 0.801 in (1)
  • 0.807 in (1)
  • 0.814 in (1)
  • 0.828 in (1)
  • 0.833 in (1)
  • 0.84 in (1)
  • 0.844 in (1)
  • 0.846 in (1)
  • 0.859 in (1)
  • 0.866 in (1)
  • 0.875 in (1)
  • 0.884 in (1)
  • 0.886 in (1)
  • 0.897 in (1)
  • 0.906 in (1)
  • 0.922 in (1)
  • 0.925 in (1)
  • 0.937 in (1)
  • 0.946 in (1)
  • 0.965 in (1)
  • 0.969 in (1)
  • 0.984 in (1)
  • 0.987 in (1)
  • 1.0 in (1)
  • 1.004 in (1)
  • 1.008 in (1)
  • 1.01 in (1)
  • 1.012 in (1)
  • 1.016 in (1)
  • 1.024 in (1)
  • 1.032 in (1)
  • 1.043 in (1)
  • 1.051 in (1)
  • 1.063 in (1)
  • 1.083 in (1)
  • 1.102 in (1)
  • 1.106 in (1)
  • 1.109 in (1)
  • 1.122 in (1)
  • 1.125 in (1)
  • 1.143 in (1)
  • 1.156 in (1)
  • 1.161 in (1)
  • 1.172 in (1)
  • 1.181 in (1)
  • 1.187 in (1)
  • 1.201 in (1)
  • 1.22 in (1)
  • 1.24 in (1)
  • 1.25 in (1)
  • 1.26 in (1)
  • 1.282 in (1)
  • 1.299 in (1)
  • 1.315 in (1)
  • 1.339 in (1)
  • 1.375 in (1)
  • 1.379 in (1)
  • 1.407 in (1)
  • 1.417 in (1)
  • 1.457 in (1)
  • 1.476 in (1)
  • 1.496 in (1)
  • 1.5 in (1)
  • 1.514 in (1)
  • 1.536 in (1)
  • 1.575 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 12.5 mm (1)
  • 12.701 mm (1)
  • 12.8 mm (1)
  • 12.925 mm (1)
  • 13.0 mm (1)
  • 13.101 mm (1)
  • 13.5 mm (1)
  • 13.601 mm (1)
  • 13.8 mm (1)
  • 14.0 mm (1)
  • 14.101 mm (1)
  • 14.15 mm (1)
  • 14.201 mm (1)
  • 14.3 mm (1)
  • 14.5 mm (1)
  • 14.601 mm (1)
  • 14.675 mm (1)
  • 14.8 mm (1)
  • 15.0 mm (1)
  • 15.076 mm (1)
  • 15.476 mm (1)
  • 15.5 mm (1)
  • 15.601 mm (1)
  • 15.875 mm (1)
  • 16.0 mm (1)
  • 16.1 mm (2)
  • 16.151 mm (1)
  • 16.2 mm (1)
  • 16.276 mm (1)
  • 16.5 mm (1)
  • 16.675 mm (1)
  • 17.0 mm (1)
  • 17.075 mm (1)
  • 17.45 mm (1)
  • 17.5 mm (1)
  • 17.75 mm (1)
  • 17.8 mm (1)
  • 17.85 mm (1)
  • 18.0 mm (1)
  • 18.25 mm (1)
  • 18.5 mm (1)
  • 18.6 mm (1)
  • 18.651 mm (1)
  • 18.901 mm (1)
  • 19.0 mm (1)
  • 19.05 mm (1)
  • 19.201 mm (1)
  • 19.225 mm (1)
  • 19.25 mm (1)
  • 19.276 mm (1)
  • 19.35 mm (1)
  • 19.451 mm (1)
  • 19.5 mm (1)
  • 19.85 mm (1)
  • 20.0 mm (1)
  • 20.1 mm (1)
  • 20.25 mm (1)
  • 20.35 mm (1)
  • 20.5 mm (1)
  • 20.651 mm (1)
  • 21.0 mm (1)
  • 21.151 mm (1)
  • 21.326 mm (1)
  • 21.425 mm (1)
  • 21.5 mm (1)
  • 21.826 mm (1)
  • 22.0 mm (1)
  • 22.225 mm (1)
  • 22.451 mm (1)
  • 22.5 mm (1)
  • 22.776 mm (1)
  • 23.0 mm (1)
  • 23.425 mm (1)
  • 23.5 mm (1)
  • 23.8 mm (1)
  • 24.0 mm (1)
  • 24.5 mm (1)
  • 24.6 mm (1)
  • 25.0 mm (1)
  • 25.076 mm (1)
  • 25.401 mm (1)
  • 25.5 mm (1)
  • 25.6 mm (1)
  • 25.651 mm (1)
  • 25.675 mm (1)
  • 25.8 mm (1)
  • 26.0 mm (1)
  • 26.201 mm (1)
  • 26.5 mm (1)
  • 26.701 mm (1)
  • 27.0 mm (1)
  • 27.5 mm (1)
  • 28.0 mm (1)
  • 28.1 mm (1)
  • 28.175 mm (1)
  • 28.5 mm (1)
  • 28.576 mm (1)
  • 29.0 mm (1)
  • 29.375 mm (1)
  • 29.5 mm (1)
  • 29.776 mm (1)
  • 30.0 mm (1)
  • 30.151 mm (1)
  • 30.5 mm (1)
  • 31.0 mm (1)
  • 31.5 mm (1)
  • 31.75 mm (1)
  • 32.0 mm (1)
  • 32.551 mm (1)
  • 33.0 mm (1)
  • 33.4 mm (1)
  • 34.0 mm (1)
  • 34.926 mm (1)
  • 35.0 mm (1)
  • 35.725 mm (1)
  • 36.0 mm (1)
  • 37.0 mm (1)
  • 37.5 mm (1)
  • 38.0 mm (1)
  • 38.1 mm (1)
  • 38.45 mm (1)
  • 39.0 mm (1)
  • 40.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Insert Geometry
Insert Seat Size
Insert Seat Size
  • 1 (17)
  • 10 (7)
  • 2 (15)
  • 3 (13)
  • 4 (9)
  • 5 (11)
  • 6 (6)
  • 7 (9)
  • 8 (6)
  • 9 (8)
  • A (8)
  • B (8)
  • C (7)
Cutting Diameter Insert
Cutting Diameter Insert
  • 0.492 in (1)
  • 0.5 in (1)
  • 0.504 in (1)
  • 0.509 in (1)
  • 0.512 in (1)
  • 0.516 in (1)
  • 0.531 in (1)
  • 0.535 in (1)
  • 0.543 in (1)
  • 0.551 in (1)
  • 0.555 in (1)
  • 0.557 in (1)
  • 0.559 in (1)
  • 0.564 in (1)
  • 0.572 in (1)
  • 0.576 in (1)
  • 0.578 in (1)
  • 0.583 in (1)
  • 0.591 in (1)
  • 0.594 in (1)
  • 0.609 in (1)
  • 0.61 in (1)
  • 0.614 in (1)
  • 0.625 in (1)
  • 0.63 in (1)
  • 0.634 in (2)
  • 0.636 in (1)
  • 0.638 in (1)
  • 0.641 in (1)
  • 0.65 in (1)
  • 0.656 in (1)
  • 0.669 in (1)
  • 0.672 in (1)
  • 0.687 in (1)
  • 0.69 in (1)
  • 0.7 in (1)
  • 0.702 in (1)
  • 0.704 in (1)
  • 0.709 in (1)
  • 0.719 in (1)
  • 0.728 in (1)
  • 0.732 in (1)
  • 0.734 in (1)
  • 0.744 in (1)
  • 0.748 in (1)
  • 0.75 in (1)
  • 0.756 in (1)
  • 0.757 in (1)
  • 0.758 in (1)
  • 0.759 in (1)
  • 0.762 in (1)
  • 0.766 in (1)
  • 0.768 in (1)
  • 0.781 in (1)
  • 0.787 in (1)
  • 0.791 in (1)
  • 0.797 in (1)
  • 0.801 in (1)
  • 0.807 in (1)
  • 0.814 in (1)
  • 0.828 in (1)
  • 0.833 in (1)
  • 0.84 in (1)
  • 0.844 in (1)
  • 0.846 in (1)
  • 0.859 in (1)
  • 0.866 in (1)
  • 0.875 in (1)
  • 0.884 in (1)
  • 0.886 in (1)
  • 0.897 in (1)
  • 0.906 in (1)
  • 0.922 in (1)
  • 0.925 in (1)
  • 0.937 in (1)
  • 0.946 in (1)
  • 0.965 in (1)
  • 0.969 in (1)
  • 0.984 in (1)
  • 0.987 in (1)
  • 1.0 in (1)
  • 1.004 in (1)
  • 1.008 in (1)
  • 1.01 in (1)
  • 1.012 in (1)
  • 1.016 in (1)
  • 1.024 in (1)
  • 1.032 in (1)
  • 1.043 in (1)
  • 1.051 in (1)
  • 1.063 in (1)
  • 1.083 in (1)
  • 1.102 in (1)
  • 1.106 in (1)
  • 1.109 in (1)
  • 1.122 in (1)
  • 1.125 in (1)
  • 1.143 in (1)
  • 1.156 in (1)
  • 1.161 in (1)
  • 1.172 in (1)
  • 1.181 in (1)
  • 1.187 in (1)
  • 1.201 in (1)
  • 1.22 in (1)
  • 1.24 in (1)
  • 1.25 in (1)
  • 1.26 in (1)
  • 1.282 in (1)
  • 1.299 in (1)
  • 1.315 in (1)
  • 1.339 in (1)
  • 1.375 in (1)
  • 1.379 in (1)
  • 1.407 in (1)
  • 1.417 in (1)
  • 1.457 in (1)
  • 1.476 in (1)
  • 1.496 in (1)
  • 1.5 in (1)
  • 1.514 in (1)
  • 1.536 in (1)
  • 1.575 in (1)
Cutting Diameter Insert Min to Cutting Diameter Insert Max
Cutting Diameter Insert
Cutting Diameter Insert
  • 12.5 mm (1)
  • 12.701 mm (1)
  • 12.8 mm (1)
  • 12.925 mm (1)
  • 13.0 mm (1)
  • 13.101 mm (1)
  • 13.5 mm (1)
  • 13.601 mm (1)
  • 13.8 mm (1)
  • 14.0 mm (1)
  • 14.101 mm (1)
  • 14.15 mm (1)
  • 14.201 mm (1)
  • 14.3 mm (1)
  • 14.5 mm (1)
  • 14.601 mm (1)
  • 14.675 mm (1)
  • 14.8 mm (1)
  • 15.0 mm (1)
  • 15.076 mm (1)
  • 15.476 mm (1)
  • 15.5 mm (1)
  • 15.601 mm (1)
  • 15.875 mm (1)
  • 16.0 mm (1)
  • 16.1 mm (2)
  • 16.151 mm (1)
  • 16.2 mm (1)
  • 16.276 mm (1)
  • 16.5 mm (1)
  • 16.675 mm (1)
  • 17.0 mm (1)
  • 17.075 mm (1)
  • 17.45 mm (1)
  • 17.5 mm (1)
  • 17.75 mm (1)
  • 17.8 mm (1)
  • 17.85 mm (1)
  • 18.0 mm (1)
  • 18.25 mm (1)
  • 18.5 mm (1)
  • 18.6 mm (1)
  • 18.651 mm (1)
  • 18.901 mm (1)
  • 19.0 mm (1)
  • 19.05 mm (1)
  • 19.201 mm (1)
  • 19.225 mm (1)
  • 19.25 mm (1)
  • 19.276 mm (1)
  • 19.35 mm (1)
  • 19.451 mm (1)
  • 19.5 mm (1)
  • 19.85 mm (1)
  • 20.0 mm (1)
  • 20.1 mm (1)
  • 20.25 mm (1)
  • 20.35 mm (1)
  • 20.5 mm (1)
  • 20.651 mm (1)
  • 21.0 mm (1)
  • 21.151 mm (1)
  • 21.326 mm (1)
  • 21.425 mm (1)
  • 21.5 mm (1)
  • 21.826 mm (1)
  • 22.0 mm (1)
  • 22.225 mm (1)
  • 22.451 mm (1)
  • 22.5 mm (1)
  • 22.776 mm (1)
  • 23.0 mm (1)
  • 23.425 mm (1)
  • 23.5 mm (1)
  • 23.8 mm (1)
  • 24.0 mm (1)
  • 24.5 mm (1)
  • 24.6 mm (1)
  • 25.0 mm (1)
  • 25.076 mm (1)
  • 25.401 mm (1)
  • 25.5 mm (1)
  • 25.6 mm (1)
  • 25.651 mm (1)
  • 25.675 mm (1)
  • 25.8 mm (1)
  • 26.0 mm (1)
  • 26.201 mm (1)
  • 26.5 mm (1)
  • 26.701 mm (1)
  • 27.0 mm (1)
  • 27.5 mm (1)
  • 28.0 mm (1)
  • 28.1 mm (1)
  • 28.175 mm (1)
  • 28.5 mm (1)
  • 28.576 mm (1)
  • 29.0 mm (1)
  • 29.375 mm (1)
  • 29.5 mm (1)
  • 29.776 mm (1)
  • 30.0 mm (1)
  • 30.151 mm (1)
  • 30.5 mm (1)
  • 31.0 mm (1)
  • 31.5 mm (1)
  • 31.75 mm (1)
  • 32.0 mm (1)
  • 32.551 mm (1)
  • 33.0 mm (1)
  • 33.4 mm (1)
  • 34.0 mm (1)
  • 34.926 mm (1)
  • 35.0 mm (1)
  • 35.725 mm (1)
  • 36.0 mm (1)
  • 37.0 mm (1)
  • 37.5 mm (1)
  • 38.0 mm (1)
  • 38.1 mm (1)
  • 38.45 mm (1)
  • 39.0 mm (1)
  • 40.0 mm (1)
Cutting Diameter Insert Min