successfully added to cart
View Cart

Notifications

Mark all as read
Kenloc™ Inserts
Kenloc™ Inserts
Kenloc™ Inserts
Kenloc™ Inserts

Negative Inserts • DNMG-FP

Kenloc™ Inserts

Features and benefits

  • Finishing geometry with positive rake face for chip control in difficult materials.

  • Beyond™ Drive™ grades included.

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
S High-Temp Alloys
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • M Stainless Steel (8)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (8)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (8)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (8)
  • S High-Temp Alloys (8)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (8)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (8)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (8)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (8)
Cutting Condition
Cutting Condition
  • Lightly Interrupted Cut (8)
  • Smooth Cut (8)
  • Varying Depth of Cut (8)
Corner configuration
Corner Radius
Corner Radius
  • 0.0156 in (3)
  • 0.0313 in (3)
  • 0.0469 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (3)
  • 0.8 mm (3)
  • 1.2 mm (2)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Lightly Interrupted Cut (8)
  • Smooth Cut (8)
  • Varying Depth of Cut (8)
Insert Geometry
Insert IC Size
Insert IC Size
  • 9.525 mm (2)
  • 12.7 mm (6)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.375 in (2)
  • 0.5 in (6)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 11.628 mm (2)
  • 15.504 mm (6)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.4578 in (2)
  • 0.6104 in (6)
Cutting Edge Length Min to Cutting Edge Length Max
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
  • High Performance Inserts
Displaying 1- 8 of 8 results
Select Columns
Select Filters
Metric
Inch
Show
    • Applied Filters:
    • Clear all filters
  • X Grade: KCS10B
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [D1] Insert Hole Size [D1] Insert Hole Size
6687102 DNMG110404FP DNMG331FP KCS10B 9.5250 .3750 11.6280 .4578 4.7600 .1875 0.4000 .0156 3.8100 .1500
    List price:
    $20.98 /each.
    Your price::
    Qty
    6687103 DNMG110408FP DNMG332FP KCS10B 9.5250 .3750 11.6280 .4578 4.7600 .1875 0.8000 .0312 3.8100 .1500
      List price:
      $20.98 /each.
      Your price::
      Qty
      6763673 DNMG150404FP DNMG431FP KCS10B 12.7000 .5000 15.5040 .6104 4.7600 .1875 0.4000 .0156 5.1600 .2031
        List price:
        $25.08 /each.
        Your price::
        Qty
        6763674 DNMG150408FP DNMG432FP KCS10B 12.7000 .5000 15.5040 .6104 4.7600 .1875 0.8000 .0312 5.1600 .2031
          List price:
          $25.08 /each.
          Your price::
          Qty
          6763676 DNMG150412FP DNMG433FP KCS10B 12.7000 .5000 15.5040 .6104 4.7600 .1875 1.2000 .0468 5.1600 .2031
            List price:
            $25.08 /each.
            Your price::
            Qty
            6687104 DNMG150604FP DNMG441FP KCS10B 12.7000 .5000 15.5040 .6104 6.3500 .2500 0.4000 .0156 5.1600 .2031
              List price:
              $33.40 /each.
              Your price::
              Qty
              6687105 DNMG150608FP DNMG442FP KCS10B 12.7000 .5000 15.5040 .6104 6.3500 .2500 0.8000 .0312 5.1600 .2031
                List price:
                $33.40 /each.
                Your price::
                Qty
                6687106 DNMG150612FP DNMG443FP KCS10B 12.7000 .5000 15.5040 .6104 6.3500 .2500 1.2000 .0468 5.1600 .2031
                  List price:
                  $33.40 /each.
                  Your price::
                  Qty
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty

                  Sold in pkg. of

                  Grades

                  • KC5010

                    Composition: An advanced PVD AlTiN coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating enables speeds to be increased by 50–100%.
                    Application: The KC5010 grade is ideal for finishing to general machining of most workpiece materials at higher speeds. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys under stable conditions. It also performs well machining hardened and short chipping materials.

                    P Steel
                    S High-Temp Alloys
                    M Stainless Steel
                  • KC8050

                    composition: A newly developed, advanced cobalt-enriched carbide
                    grade with a thick alumina coating.
                    application: A versatile performer on a wide range of workpiece
                    materials (steels, stainless steels, and cast irons) for roughing through
                    finishing operations. This highly wear-resistant grade can operate with
                    or without coolant at high speeds, and has exceptional edge strength
                    for interrupted cuts. The micro-finished insert edge resists workpiece
                    build-up and microchipping, and produces excellent surface finishes.
                    For machining steels and cast irons, your first choices are the -RN and
                    -MN geometries. For medium machining applications and finishing
                    cuts, the -MP and -FP geometries with a positive rake are suggested.

                  • KC9105

                    composition: An innovative, highly deformation-resistant cobaltenriched
                    substrate (patent pending) with a new thick multilayer
                    MTCVD-TiCN-Al2O3-TiCN-TiN coating for maximum wear resistance.
                    application: KC9105 is the latest addition to the KENNA PERFECT
                    grades for finishing to medium machining of most steels, ferritic,
                    martensitic, and PH stainless steels and cast irons The specially
                    designed substrate provides a remarkable combination of deformation
                    resistance and insert edge strength. The extra-thick MT-TiCN layer
                    provides outstanding flank wear resistance, while the thick Al2O3
                    layer offers excellent crater wear resistance and speed capability.
                    A state-of-the-art post-coating treatment results in a smooth insert
                    surface that reduces microchipping and build-up and improves
                    workpiece surface finish.

                  • KC9225

                    MT-CVD-TiN-TiCN-Al2O3-TiN gradient carbide
                    For continuous to slightly interrupted cuts
                    For universal use in boring on stainless steels
                    Reduced edge build up due to micro-polished surface

                  • KCM15

                    Composition: Nanostructured PVD TiAlN coated fine-grain carbide with a golden TiN top layer for better wear identification and superior surface finish.
                    Application: A state-of-the-art surface condition enhances low adhesion potential to stainless steel materials and offers superior chip evacuation even in low-pressure coolant applications. Applicable for stainless steel and high-temperature resistant materials.

                    P Steel
                    S High-Temp Alloys
                    M Stainless Steel
                  • KCM15B

                    Composition: A multilayer MTCVD-TiCN-Al2O3 coated carbide grade.

                    Application: An excellent finishing to medium machining grade for austenitic stainless steels at higher speeds and covers a broad range of steel applications in the P20-25 range. KCM15 grade in combination with unique geometries have been designed to resist depth-of-cut notching and minimize burr formation. The post-coat treatment reduces coating stresses, improves coating adhesion, minimizes microchipping and edge build-up, and improves workpiece finish.

                    P Steel
                    S High-Temp Alloys
                    M Stainless Steel
                  • KCP10

                    Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3 coating for maximum wear resistance.
                    Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

                    P Steel
                    K Cast Iron
                  • KCP10B

                    Composition: A specially engineered cobalt-enriched carbide grade with thick MTCVD-TiCN-Al2O3-TiOCN coating for maximum wear resistance.

                    Application: An excellent finishing to medium machining grade for a variety of workpiece materials, including most steels, ferritic, martensitic, and PH stainless steels, and cast irons. The cobalt-enriched substrate offers a balanced combination of deformation resistance and edge toughness, while the thick coating layers offer outstanding abrasion resistance and crater wear resistance for high-speed machining. Smooth coating provides resistance to edge build-up and microchipping and produces excellent surface finishes.

                    P Steel
                    K Cast Iron
                  • KCP25

                    Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3 coating with superior interlayer adhesion.
                    Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

                    P Steel
                    K Cast Iron
                  • KCP25B

                    Composition: A tough cobalt-enriched carbide grade with a newly designed multilayer MTCVD-TiCN-Al2O3-TiOCN coating with superior interlayer adhesion.

                    Application: Best general-purpose turning grade for most steels and ferritic and martensitic stainless steels. The substrate design ensures adequate deformation resistance with excellent insert edge strength. Coating layers offer good wear resistance over a wide range of machining conditions and the post-coat treatment minimises microchipping and improves coating adhesion to substrate leading to long tool life and improved workpiece finishes.

                    P Steel
                    K Cast Iron
                  • KCPK05

                    Composition: A deformation-resistant, cobalt-enriched substrate combined with thick MTCVD TiCN-Al2O3 coating.

                    Application: For high productivity turning of steels and PH stainless steels in continuous to lightly interrupted cuts. This grade provides excellent combination of toughness and high speed wear resistance allowing the fastest steel part production. Its unique combination of substrate and coating also make it an ideal roughing grade for cast iron where chipping resistance is required.

                    P Steel
                    K Cast Iron
                  • KCS10B

                    Composition: PVD-AlTiN coating with a very smooth coating surface and extremely hard, wear-resistant ultra fine-grain carbide substrate.
                    Application: The KCS10B™ grade is ideal for medium machining and finishing operations of Nickel-Based, Cobalt-Based, and Iron-Based High-Temperature Alloys. The extremely hard, wear-resistant carbide substrate allows for longer tool life while the ultra fine-grain carbide substrate and smoother coating reduces friction.

                    S High-Temp Alloys
                    M Stainless Steel
                  • KCU10

                    Composition: An advanced multilayer PVD coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating improves edge stability with wide range speed and feed capabilities.

                    Application: The KCU10™ grade is ideal for finishing to general machining of most workpiece materials at a wide range of speed and feed capabilities. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys with improved edge toughness and higher cutting speed/feed capability.

                    P Steel
                    S High-Temp Alloys
                    M Stainless Steel
                  • KT315

                    Composition: A multilayer PVD-TiN/TiCN/TiN-coated cermet turning grade.
                    Application: Ideal for high-speed finishing to medium machining of most carbon and alloy steels and stainless steels. Performs very well in cast and ductile iron applications, too. Provides long and consistent tool life and will produce excellent workpiece finishes.

                    P Steel
                    K Cast Iron
                    M Stainless Steel
                  • KTP10

                    Composition: A multilayer, PVD-TiN/TiCN/TiN-coated cermet turning grade.
                    Application: Ideal for high-speed finishing to medium machining of most carbon and alloy steels and stainless steels. Performs very well in cast and ductile iron applications, too. Provides long and consistent tool life and will produce excellent workpiece finishes.

                    P Steel
                    K Cast Iron
                    M Stainless Steel
                  • KU10T
                  product-image
                  Please adjust the following properties from

                  ISO Catalog Number

                  ANSI Catalog Number

                  to find similar products.
                  You are about to create a duplicate . Do you want to proceed?
                  You are about to delete Do you want to proceed?
                  What would you like to rename your to?
                  Please enter a valid name
                  Please enter a name for the duplicate
                  Please enter a valid name
                  You are about to add to your My Solutions page. Do you want to proceed?
                  Please enter a valid name
                  Send a copy of

                  Please enter a valid Email
                  Please enter a valid name

                  The following CAD files are available

                  Please select a file to download

                  You should be logged to see your dashboard information
                  Session expired due to inactivity, please login again
                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                  item(s) successfully added to the cart
                  View Cart