successfully added to cart
View Cart

Notifications

Mark all as read

A4™ • Double-Ended Cut-Off

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (581)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (581)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (581)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (581)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (581)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (581)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (581)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (581)
  • M Stainless Steel (508)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (508)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (508)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (508)
  • K Cast Iron (564)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (564)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (555)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (543)
  • N Non-Ferrous Materials (516)
    • N1
      Wrought Aluminum
      (516)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (507)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (69)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (516)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (507)
    • N6
      Carbon, Graphite Composites, CFRP
      (507)
    • N7
      MMC's
      (69)
  • S High-Temp Alloys (525)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (525)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (525)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (525)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (512)
  • H Hardened Materials (303)
    • H1
      Hardened Materials 44-48 HRC
      (303)
    • H2
      Hardened Materials 48-55 HRC
      (245)
    • H3
      Hardened Materials 56-60 HRC
      (97)
    • H4
      Hardened Materials >60 HRC
      (97)
Select First Choice
  • BR (48)
  • CN (217)
  • DE (217)
  • GB (133)
  • IN (108)
  • SG (121)
  • US (254)
Applications
Applications
  • Boring Boring (379)
  • Cut-Off Cut-Off (91)
  • Deep Grooving Deep Grooving (34)
  • Face Grooving Face Grooving (440)
  • Facing Facing (4)
  • Grooving Grooving (628)
  • ID Grooving ID Grooving (396)
  • ID Thread Turning ID Thread Turning (39)
  • Multiple Direction Cutting Multiple Direction Cutting (128)
  • Plunge Turning Plunge Turning (383)
  • Profiling Profiling (157)
  • Turning Turning (123)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (319)
  • Lightly Interrupted Cut (342)
  • Smooth Cut (531)
  • Varying Depth of Cut (509)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (100)
  • 92.25 (24)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Cutoff Support Blade A1-A3 (2)
  • Toolholder (119)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (91)
  • 2.0 (585)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.006 in (6)
  • 0.008 in (176)
  • 0.016 in (237)
  • 0.031 in (187)
  • 0.034 in (19)
  • 0.039 in (34)
  • 0.041 in (33)
  • 0.047 in (59)
  • 0.048 in (12)
  • 0.06 in (45)
  • 0.063 in (33)
  • 0.079 in (26)
  • 0.08 in (26)
  • 0.094 in (24)
  • 0.098 in (30)
  • 0.099 in (27)
  • 0.119 in (28)
  • 0.12 in (26)
  • 0.125 in (26)
  • 0.156 in (11)
  • 0.157 in (15)
  • 0.158 in (17)
  • 0.187 in (8)
  • 0.188 in (9)
  • 0.197 in (10)
  • 0.198 in (12)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.151 mm (6)
  • 0.2 mm (176)
  • 0.4 mm (237)
  • 0.8 mm (187)
  • 0.851 mm (19)
  • 1.0 mm (34)
  • 1.05 mm (33)
  • 1.201 mm (59)
  • 1.225 mm (12)
  • 1.5 mm (37)
  • 1.526 mm (35)
  • 1.6 mm (33)
  • 2.0 mm (26)
  • 2.025 mm (26)
  • 2.375 mm (24)
  • 2.5 mm (30)
  • 2.526 mm (27)
  • 3.0 mm (28)
  • 3.026 mm (26)
  • 3.176 mm (26)
  • 3.975 mm (11)
  • 4.0 mm (15)
  • 4.025 mm (17)
  • 4.75 mm (8)
  • 4.775 mm (9)
  • 5.0 mm (10)
  • 5.025 mm (12)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (511)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (511)
Corner Chamfer Min to Corner Chamfer Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (187)
  • Lightly Interrupted Cut (210)
  • Smooth Cut (399)
  • Varying Depth of Cut (377)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K1025 (48)
  • K313 (141)
  • KB1630 (93)
  • KB5625 (84)
  • KBH20 (88)
  • KC5010 (190)
  • KC5025 (200)
  • KC9110 (132)
  • KC9125 (132)
  • KCK20 (108)
  • KCP10 (164)
  • KCP25 (166)
  • KCU10 (232)
  • KCU25 (277)
  • KD1405 (69)
  • KMS (46)
  • KT315 (119)
  • KU10 (131)
  • KU30T (84)
  • KY3500 (114)
  • KYS30 (52)
  • SP88F8 (19)
Hand Of Tool
Hand Of Tool
  • L (56)
  • R (65)
Wiper Insert
Wiper Insert
  • N (603)
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 1.063 in (9)
  • 1.102 in (7)
  • 1.339 in (7)
  • 1.379 in (2)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 27.0 mm (9)
  • 28.0 mm (7)
  • 34.0 mm (7)
  • 35.0 mm (2)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (121)
Rake Angle Style
Rake Angle Style
  • NEUTRAL (ZERO) (18)
  • POSITIVE-ZERO (76)
Front-End
Adapter Front-End
Adapter Front-End
  • CARTRIDGE MOUNT (3)
Clamp Style
Clamp Style
  • Y (124)
Cutting Width
Cutting Width
  • 0.06 in (6)
  • 0.079 in (47)
  • 0.081 in (47)
  • 0.084 in (33)
  • 0.094 in (2)
  • 0.095 in (3)
  • 0.097 in (1)
  • 0.098 in (6)
  • 0.104 in (4)
  • 0.119 in (60)
  • 0.12 in (84)
  • 0.125 in (44)
  • 0.128 in (27)
  • 0.157 in (52)
  • 0.159 in (70)
  • 0.187 in (32)
  • 0.19 in (19)
  • 0.197 in (49)
  • 0.199 in (63)
  • 0.237 in (43)
  • 0.239 in (61)
  • 0.25 in (35)
  • 0.253 in (19)
  • 0.312 in (12)
  • 0.313 in (12)
  • 0.315 in (24)
  • 0.316 in (10)
  • 0.317 in (37)
  • 0.375 in (13)
  • 0.379 in (8)
  • 0.394 in (14)
  • 0.396 in (26)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 1.5 mm (6)
  • 2.0 mm (47)
  • 2.051 mm (47)
  • 2.125 mm (33)
  • 2.375 mm (2)
  • 2.401 mm (3)
  • 2.475 mm (1)
  • 2.5 mm (6)
  • 2.625 mm (4)
  • 3.0 mm (60)
  • 3.051 mm (84)
  • 3.176 mm (44)
  • 3.25 mm (27)
  • 4.0 mm (52)
  • 4.05 mm (70)
  • 4.75 mm (32)
  • 4.825 mm (19)
  • 5.0 mm (49)
  • 5.051 mm (63)
  • 6.0 mm (43)
  • 6.051 mm (61)
  • 6.351 mm (35)
  • 6.426 mm (19)
  • 7.926 mm (12)
  • 7.95 mm (12)
  • 8.0 mm (24)
  • 8.025 mm (10)
  • 8.05 mm (37)
  • 9.525 mm (13)
  • 9.625 mm (8)
  • 10.0 mm (14)
  • 10.05 mm (26)
Cutting Width Min to Cutting Width Max
Front End Type
Front End Type
  • MCS - Modular Cartridge System (3)
Insert Shape
Insert Shape
  • PRISMATIC (632)
Cartridge Size
Cartridge Size
  • 50 (9)
  • 65 (11)
Front End Style
Front End Style
  • MCS01 Modular Deep Grooving (3)
Insert Size
Insert Size
  • 10 (4)
  • 2 (19)
  • 3 (19)
  • 4 (17)
  • 5 (15)
  • 6 (16)
  • 8 (8)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.315 in (6)
  • 0.394 in (5)
  • 0.531 in (9)
  • 0.551 in (32)
  • 0.572 in (4)
  • 0.669 in (29)
  • 0.69 in (5)
  • 0.748 in (6)
  • 0.787 in (18)
  • 0.866 in (6)
  • 0.946 in (4)
  • 1.024 in (17)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 8.0 mm (6)
  • 10.0 mm (5)
  • 13.5 mm (9)
  • 14.0 mm (32)
  • 14.5 mm (4)
  • 17.0 mm (29)
  • 17.5 mm (5)
  • 19.0 mm (6)
  • 20.0 mm (18)
  • 22.0 mm (6)
  • 24.0 mm (4)
  • 26.0 mm (17)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 6 in (4)
  • 7 in (2)
  • 2.303 in (1)
  • 2.5 in (2)
  • 5.439 in (1)
  • 5.463 in (2)
  • 5.482 in (2)
  • 5.508 in (6)
  • 5.529 in (4)
  • 5.533 in (3)
  • 5.906 in (2)
  • 6.25 in (2)
  • 6.271 in (2)
  • 6.694 in (1)
Gage Length
Gage Length
  • 150 mm (2)
  • 170 mm (1)
  • 58.5 mm (1)
  • 63.5 mm (2)
  • 138.15 mm (1)
  • 138.75 mm (2)
  • 139.25 mm (2)
  • 139.9 mm (6)
  • 140.4 mm (4)
  • 140.55 mm (3)
  • 152.4 mm (4)
  • 158.75 mm (2)
  • 159.25 mm (2)
  • 177.8 mm (2)
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
  • 1.651 mm (5)
  • 1.75 mm (4)
  • 1.901 mm (7)
  • 2.0 mm (25)
  • 2.475 mm (5)
  • 2.5 mm (2)
  • 2.575 mm (6)
  • 2.725 mm (4)
  • 2.901 mm (9)
  • 3.0 mm (12)
  • 3.301 mm (6)
  • 3.401 mm (47)
  • 3.45 mm (6)
  • 3.5 mm (31)
  • 3.526 mm (4)
  • 3.6 mm (3)
  • 3.801 mm (5)
  • 4.075 mm (5)
  • 4.101 mm (7)
  • 4.15 mm (6)
  • 4.2 mm (37)
  • 4.4 mm (6)
  • 4.5 mm (12)
  • 4.601 mm (1)
  • 4.75 mm (6)
  • 4.801 mm (5)
  • 4.9 mm (37)
  • 5.0 mm (1)
  • 5.301 mm (4)
  • 5.9 mm (6)
  • 6.0 mm (14)
  • 6.101 mm (4)
  • 6.25 mm (2)
  • 6.275 mm (1)
  • 6.351 mm (1)
  • 6.4 mm (17)
  • 6.5 mm (6)
  • 7.301 mm (1)
  • 7.95 mm (3)
  • 8.1 mm (9)
  • 8.201 mm (3)
Maximum Cutting Insert Depth Min to Maximum Cutting Insert Depth Max
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
  • 0.065 in (5)
  • 0.069 in (4)
  • 0.075 in (7)
  • 0.079 in (25)
  • 0.097 in (5)
  • 0.098 in (2)
  • 0.101 in (6)
  • 0.107 in (4)
  • 0.114 in (9)
  • 0.119 in (12)
  • 0.13 in (6)
  • 0.134 in (47)
  • 0.136 in (6)
  • 0.138 in (31)
  • 0.139 in (4)
  • 0.143 in (3)
  • 0.15 in (5)
  • 0.16 in (5)
  • 0.161 in (7)
  • 0.163 in (6)
  • 0.165 in (37)
  • 0.174 in (6)
  • 0.177 in (12)
  • 0.181 in (1)
  • 0.187 in (6)
  • 0.189 in (5)
  • 0.193 in (37)
  • 0.197 in (1)
  • 0.209 in (4)
  • 0.232 in (6)
  • 0.237 in (14)
  • 0.24 in (4)
  • 0.246 in (2)
  • 0.247 in (1)
  • 0.25 in (1)
  • 0.252 in (17)
  • 0.256 in (6)
  • 0.288 in (1)
  • 0.313 in (3)
  • 0.319 in (9)
  • 0.323 in (3)
Maximum Cutting Insert Depth Min to Maximum Cutting Insert Depth Max
Insert Geometry
Shape
Shape
  • PRISMATIC (491)
Insert Seat Size
Insert Seat Size
  • 1 (6)
  • 10 (29)
  • 2 (33)
  • 2B (11)
  • 2S (7)
  • 3 (95)
  • 3S (12)
  • 4 (90)
  • 4S (7)
  • 5 (66)
  • 5S (8)
  • 6 (82)
  • 8 (45)
Cutting Tool Material
Cutting Tool Material
  • B H (93)
  • B L (88)
  • C N (118)
  • D P (69)
  • H T (119)
  • H W (585)
Back-End
Connection Type
Connection Type
  • CUTOFF BLADE (2)
  • SQUARE SHANK (119)
System Size
System Size
  • KM63XMZ (3)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Grooving and Cut-Off

A4™ Grooving and Turning Modular Blades • O.D. Grooving
(17 Products)
  • TurningTurning
  • Cut-OffCut-Off
  • O.D. Deep GroovingO.D. Deep Grooving
  • ProfilingProfiling
  • FacingFacing
  • ChamferingChamfering
  • GroovingGrooving
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [CD] Cutting Depth [CD] Cutting Depth [FS] Secondary F Dimension [FS] Secondary F Dimension Cartridge Size
6401817 A4M50R0414MC A4M50R0414MC   4 14.0000 .5510 9.9200 .3910 50
    List price:
    $202.17 /each.
    Your price::
    Qty
    6401851 A4M65L1026MC A4M65L1026MC   10 26.0000 1.023 8.3500 .3290 65
      List price:
      $208.48 /each.
      Your price::
      Qty
      6401834 A4M65R0620MC A4M65R0620MC   6 20.0000 .7870 9.8800 .3890 65
        List price:
        $208.48 /each.
        Your price::
        Qty
        6401835 A4M65R0626MC A4M65R0626MC   6 26.0000 1.024 9.8800 .3890 65
          List price:
          $208.48 /each.
          Your price::
          Qty
          6401839 A4M65R0826MC A4M65R0826MC   8 26.0000 1.024 9.0000 .3540 65
            List price:
            $208.48 /each.
            Your price::
            Qty
            6401853 A4M65R1026MC A4M65R1026MC   10 26.0000 1.024 8.3500 .3290 65
              List price:
              $208.48 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Grooving and Cut-Off

              A4™ Integral Toolholders
              (12 Products)
              • TurningTurning
              • ProfilingProfiling
              • FacingFacing
              • ChamferingChamfering
              • GroovingGrooving
              • Cut-OffCut-Off
              • O.D. Deep GroovingO.D. Deep Grooving
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter [CD] Cutting Depth [CD] Cutting Depth [WM] Minimum Groove Width [WM] Minimum Groove Width [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [H2] Head Height [H2] Head Height [L1] Tool Length [L1] Tool Length [FS] Secondary F Dimension [FS] Secondary F Dimension [LH] Head Length [LH] Head Length Clamp Screw ID Drive Size
              4169749 A4SCL1212K0214 A4SCL1212K0214   2 28.0000 1.102 14.0000 .5512 2.0000 .0787 12.0000 .4724 12.0000 .4724 21.0000 .8268 125.0000 4.921 11.1700 .4400 28.0000 1.102 T20
                List price:
                $191.84 /each.
                Your price::
                Qty
                2978378 A4SCR1212K0113 A4SCR1212K0113   1.5 27.0000 1.063 13.5000 .5315 1.5000 .0591 12.0000 .4724 12.0000 .4724 21.0000 .8268 125.0000 4.921 11.4000 .4488 25.0000 .9800 T15
                  List price:
                  $196.51 /each.
                  Your price::
                  Qty
                  4169745 A4SCR1212K0214 A4SCR1212K0214   2 28.0000 1.102 14.0000 .5512 2.0000 .0787 12.0000 .4724 12.0000 .4724 21.0000 .8268 125.0000 4.921 11.1700 .4400 28.0000 1.102 T20
                    List price:
                    $191.84 /each.
                    Your price::
                    Qty
                    4169747 A4SCR1212K0314 A4SCR1212K0314   3 28.0000 1.102 14.0000 .5512 3.0000 .1181 12.0000 .4724 12.0000 .4724 23.0000 .9055 125.0000 4.921 10.7200 .4220 30.0000 1.181 25 IP
                      List price:
                      $191.84 /each.
                      Your price::
                      Qty
                      4169746 A4SCR1616K0217 A4SCR1616K0217   2 34.0000 1.338 17.0000 .6693 2.0000 .0787 16.0000 .6299 16.0000 .6299 26.0000 1.023 125.0000 4.921 15.2000 .5970 31.0000 1.220 T25
                        List price:
                        $185.81 /each.
                        Your price::
                        Qty
                        4169748 A4SCR1616K0317 A4SCR1616K0317   3 34.0000 1.338 17.0000 .6693 3.0000 .1181 16.0000 .6299 16.0000 .6299 27.0000 1.063 125.0000 4.921 14.7200 .5800 33.0000 1.299 25 IP
                          List price:
                          $185.81 /each.
                          Your price::
                          Qty
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is no longer available
                          Replacement Product Please contact customer service for assistance
                          Qty

                          Sold in pkg. of

                          ORIGINAL PRODUCT

                          Grooving and Cut-Off

                          A4™ Integral Toolholders
                          (40 Products)
                          • TurningTurning
                          • ProfilingProfiling
                          • FacingFacing
                          • ChamferingChamfering
                          • GroovingGrooving
                          • Cut-OffCut-Off
                          • O.D. Deep GroovingO.D. Deep Grooving
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Insert Size [CD] Cutting Depth [CD] Cutting Depth [WM] Minimum Groove Width [WM] Minimum Groove Width [H] Shank Height [H] Shank Height [B] Shank Width [B] Shank Width [H2] Head Height [H2] Head Height [L1] Tool Length [L1] Tool Length [FS] Secondary F Dimension [FS] Secondary F Dimension [LH] Head Length [LH] Head Length Clamp Screw ID Drive Size
                          1953178 A4SML100314 A4SML100314   3 14.0000 .5512 3.0000 .1181 15.8750 .6250 15.8750 .6250 26.2000 1.031 127.0000 5.000 14.4470 .5688 35.0000 1.380 T25
                            List price:
                            $168.58 /each.
                            Your price::
                            Qty
                            1953180 A4SML120314 A4SML120314   3 14.0000 .5512 3.0000 .1181 19.0500 .7500 19.0500 .7500 27.0000 1.063 127.0000 5.000 17.6220 .6938 35.0000 1.378 T30
                              List price:
                              $165.06 /each.
                              Your price::
                              Qty
                              1953182 A4SML160317 A4SML160317   3 17.0000 .6693 3.0000 .1181 25.4000 1.000 25.4000 1.000 32.0000 1.259 152.4000 6.000 23.9720 .9438 37.0000 1.456 T30
                                List price:
                                $178.96 /each.
                                Your price::
                                Qty
                                1953177 A4SMR100314 A4SMR100314   3 14.0000 .5512 3.0000 .1181 15.8750 .6250 15.8750 .6250 26.2000 1.031 127.0000 5.000 14.4470 .5688 35.0000 1.378 T25
                                  List price:
                                  $168.58 /each.
                                  Your price::
                                  Qty
                                  1953179 A4SMR120314 A4SMR120314   3 14.0000 .5512 3.0000 .1181 19.0500 .7500 19.0500 .7500 27.0000 1.063 127.0000 5.000 17.6220 .6938 35.0000 1.378 T30
                                    List price:
                                    $165.06 /each.
                                    Your price::
                                    Qty
                                    1953181 A4SMR160317 A4SMR160317   3 17.0000 .6693 3.0000 .1181 25.4000 1.000 25.4000 1.000 32.0000 1.259 152.4000 6.000 23.9720 .9438 37.0000 1.456 T30
                                      List price:
                                      $178.96 /each.
                                      Your price::
                                      Qty
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is no longer available
                                      Replacement Product Please contact customer service for assistance
                                      Qty

                                      Sold in pkg. of

                                      ORIGINAL PRODUCT

                                      Grooving and Cut-Off

                                      A4™ Integral Toolholders
                                      (9 Products)
                                      • TurningTurning
                                      • ProfilingProfiling
                                      • FacingFacing
                                      • GroovingGrooving
                                      • ChamferingChamfering