Product Suggestions

Product Family suggestions

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu
Need Help? Contact an Expert site stretcher close

Drill Fix • DFR

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (366)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (360)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (360)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (366)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (366)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (360)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (360)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (360)
  • M Stainless Steel (351)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (351)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (351)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (351)
  • K Cast Iron (358)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (358)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (358)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (358)
  • N Non-Ferrous Materials (344)
    • N1
      Wrought Aluminum
      (341)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (341)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (341)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (341)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (341)
    • N6
      Carbon, Graphite Composites, CFRP
      (335)
    • N7
      MMC's
      (337)
  • S High-Temp Alloys (351)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (351)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (351)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (351)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (351)
Select First Choice
  • BR (9)
  • CN (70)
  • DE (70)
  • GB (32)
  • IN (3)
  • SG (21)
  • US (59)
Applications
Applications
  • Convex Drilling Convex Drilling (210)
  • Drilling Drilling (243)
  • ID Thread Turning ID Thread Turning (3)
  • Inclined Entry Drilling Inclined Entry Drilling (210)
  • Inclined Exit Drilling Inclined Exit Drilling (210)
  • X-Offset Drilling X-Offset Drilling (210)
Cutting Diameter
Cutting Diameter
  • 0.492 in (11)
  • 0.5 in (13)
  • 0.512 in (12)
  • 0.531 in (14)
  • 0.551 in (12)
  • 0.564 in (8)
  • 0.572 in (6)
  • 0.591 in (10)
  • 0.595 in (8)
  • 0.61 in (6)
  • 0.625 in (10)
  • 0.63 in (12)
  • 0.65 in (6)
  • 0.656 in (9)
  • 0.669 in (10)
  • 0.689 in (9)
  • 0.69 in (4)
  • 0.704 in (3)
  • 0.709 in (10)
  • 0.728 in (4)
  • 0.734 in (9)
  • 0.748 in (9)
  • 0.75 in (9)
  • 0.768 in (4)
  • 0.781 in (9)
  • 0.787 in (9)
  • 0.807 in (4)
  • 0.814 in (9)
  • 0.828 in (10)
  • 0.845 in (9)
  • 0.866 in (8)
  • 0.875 in (9)
  • 0.906 in (16)
  • 0.939 in (9)
  • 0.946 in (10)
  • 0.969 in (8)
  • 0.984 in (2)
  • 1.0 in (5)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 12.5 mm (11)
  • 12.701 mm (13)
  • 13.0 mm (12)
  • 13.476 mm (8)
  • 13.5 mm (6)
  • 14.0 mm (12)
  • 14.3 mm (8)
  • 14.5 mm (6)
  • 15.0 mm (10)
  • 15.101 mm (8)
  • 15.5 mm (6)
  • 15.875 mm (10)
  • 16.0 mm (12)
  • 16.5 mm (6)
  • 16.651 mm (9)
  • 17.0 mm (10)
  • 17.475 mm (9)
  • 17.5 mm (4)
  • 17.85 mm (3)
  • 18.0 mm (10)
  • 18.5 mm (4)
  • 18.651 mm (9)
  • 19.0 mm (9)
  • 19.05 mm (9)
  • 19.5 mm (4)
  • 19.826 mm (9)
  • 20.0 mm (9)
  • 20.5 mm (4)
  • 20.651 mm (9)
  • 21.0 mm (10)
  • 21.451 mm (9)
  • 22.0 mm (8)
  • 22.225 mm (9)
  • 23.0 mm (16)
  • 23.826 mm (9)
  • 24.0 mm (10)
  • 24.625 mm (8)
  • 25.0 mm (2)
  • 25.401 mm (5)
Cutting Diameter Min to Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Interrupted (20)
  • Stable (42)
  • Unstable (41)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 25.0 mm (3)
  • 25.401 mm (2)
  • 26.0 mm (2)
  • 27.0 mm (2)
  • 28.0 mm (2)
  • 28.6 mm (1)
  • 29.0 mm (2)
  • 30.0 mm (2)
  • 31.0 mm (2)
  • 31.75 mm (1)
  • 32.0 mm (2)
  • 33.0 mm (2)
  • 34.0 mm (2)
  • 34.95 mm (1)
  • 35.0 mm (1)
  • 36.0 mm (1)
  • 37.0 mm (1)
  • 37.5 mm (7)
  • 38.0 mm (1)
  • 38.1 mm (7)
  • 39.0 mm (9)
  • 40.0 mm (1)
  • 40.45 mm (7)
  • 40.5 mm (2)
  • 41.0 mm (1)
  • 41.301 mm (1)
  • 42.0 mm (9)
  • 42.6 mm (1)
  • 42.901 mm (6)
  • 43.5 mm (2)
  • 44.0 mm (1)
  • 44.45 mm (1)
  • 45.0 mm (6)
  • 45.276 mm (7)
  • 46.0 mm (1)
  • 46.5 mm (2)
  • 47.625 mm (7)
  • 47.651 mm (1)
  • 48.0 mm (9)
  • 49.5 mm (2)
  • 49.975 mm (8)
  • 50.0 mm (2)
  • 50.801 mm (4)
  • 51.0 mm (6)
  • 52.0 mm (2)
  • 52.426 mm (7)
  • 52.5 mm (2)
  • 53.575 mm (2)
  • 53.95 mm (1)
  • 54.0 mm (10)
  • 55.5 mm (2)
  • 55.926 mm (8)
  • 56.0 mm (2)
  • 57.0 mm (7)
  • 57.151 mm (7)
  • 57.2 mm (1)
  • 58.0 mm (2)
  • 58.5 mm (2)
  • 59.5 mm (8)
  • 60.0 mm (9)
  • 60.35 mm (1)
  • 61.5 mm (2)
  • 61.95 mm (7)
  • 62.0 mm (2)
  • 63.0 mm (8)
  • 63.5 mm (2)
  • 64.0 mm (2)
  • 64.325 mm (8)
  • 66.0 mm (8)
  • 66.375 mm (1)
  • 66.65 mm (1)
  • 66.675 mm (6)
  • 68.0 mm (2)
  • 69.0 mm (6)
  • 69.025 mm (7)
  • 69.9 mm (1)
  • 70.0 mm (1)
  • 71.425 mm (1)
  • 71.476 mm (7)
  • 72.0 mm (9)
  • 73.55 mm (1)
  • 73.851 mm (6)
  • 74.0 mm (1)
  • 74.575 mm (1)
  • 74.976 mm (1)
  • 76.0 mm (1)
  • 76.2 mm (3)
  • 78.0 mm (1)
  • 79.351 mm (1)
  • 80.0 mm (1)
  • 82.0 mm (1)
  • 82.601 mm (1)
  • 84.0 mm (1)
  • 85.75 mm (1)
  • 88.0 mm (1)
  • 88.9 mm (1)
  • 92.0 mm (1)
  • 92.051 mm (1)
  • 95.301 mm (1)
  • 96.0 mm (1)
  • 97.426 mm (1)
  • 98.45 mm (1)
  • 101.601 mm (2)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.984 in (3)
  • 1.0 in (2)
  • 1.024 in (2)
  • 1.063 in (2)
  • 1.102 in (2)
  • 1.127 in (1)
  • 1.143 in (2)
  • 1.181 in (2)
  • 1.22 in (2)
  • 1.25 in (1)
  • 1.26 in (2)
  • 1.299 in (2)
  • 1.339 in (2)
  • 1.377 in (1)
  • 1.379 in (1)
  • 1.417 in (1)
  • 1.457 in (1)
  • 1.476 in (7)
  • 1.496 in (1)
  • 1.5 in (7)
  • 1.536 in (9)
  • 1.575 in (1)
  • 1.593 in (7)
  • 1.594 in (2)
  • 1.614 in (1)
  • 1.627 in (1)
  • 1.655 in (9)
  • 1.677 in (1)
  • 1.689 in (6)
  • 1.713 in (2)
  • 1.732 in (1)
  • 1.75 in (1)
  • 1.772 in (6)
  • 1.784 in (7)
  • 1.811 in (1)
  • 1.831 in (2)
  • 1.875 in (7)
  • 1.877 in (1)
  • 1.891 in (9)
  • 1.949 in (2)
  • 1.968 in (8)
  • 1.969 in (2)
  • 2.0 in (4)
  • 2.008 in (6)
  • 2.047 in (2)
  • 2.064 in (7)
  • 2.067 in (2)
  • 2.109 in (2)
  • 2.124 in (1)
  • 2.126 in (10)
  • 2.185 in (2)
  • 2.202 in (8)
  • 2.205 in (2)
  • 2.244 in (7)
  • 2.25 in (7)
  • 2.253 in (1)
  • 2.283 in (2)
  • 2.303 in (2)
  • 2.343 in (8)
  • 2.362 in (9)
  • 2.376 in (1)
  • 2.422 in (2)
  • 2.439 in (7)
  • 2.441 in (2)
  • 2.48 in (8)
  • 2.5 in (2)
  • 2.52 in (2)
  • 2.532 in (8)
  • 2.598 in (8)
  • 2.613 in (1)
  • 2.624 in (1)
  • 2.625 in (6)
  • 2.677 in (2)
  • 2.717 in (6)
  • 2.718 in (7)
  • 2.753 in (1)
  • 2.757 in (1)
  • 2.813 in (1)
  • 2.814 in (7)
  • 2.835 in (9)
  • 2.896 in (1)
  • 2.908 in (6)
  • 2.914 in (1)
  • 2.936 in (1)
  • 2.952 in (1)
  • 2.992 in (1)
  • 3.0 in (3)
  • 3.071 in (1)
  • 3.124 in (1)
  • 3.15 in (1)
  • 3.228 in (1)
  • 3.253 in (1)
  • 3.307 in (1)
  • 3.376 in (1)
  • 3.465 in (1)
  • 3.5 in (1)
  • 3.622 in (1)
  • 3.624 in (1)
  • 3.753 in (1)
  • 3.781 in (1)
  • 3.837 in (1)
  • 3.876 in (1)
  • 4.0 in (2)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 1.024 in (1)
  • 1.102 in (1)
  • 1.143 in (3)
  • 1.181 in (4)
  • 1.22 in (2)
  • 1.26 in (1)
  • 1.299 in (1)
  • 1.339 in (1)
  • 1.379 in (2)
  • 1.417 in (3)
  • 1.457 in (3)
  • 1.496 in (2)
  • 1.536 in (2)
  • 1.614 in (6)
  • 1.655 in (3)
  • 1.693 in (4)
  • 1.732 in (10)
  • 1.772 in (6)
  • 1.811 in (7)
  • 1.85 in (5)
  • 1.891 in (4)
  • 1.929 in (6)
  • 1.969 in (8)
  • 2.008 in (6)
  • 2.047 in (9)
  • 2.087 in (5)
  • 2.126 in (10)
  • 2.165 in (5)
  • 2.205 in (6)
  • 2.244 in (6)
  • 2.283 in (6)
  • 2.323 in (8)
  • 2.362 in (6)
  • 2.402 in (7)
  • 2.441 in (4)
  • 2.48 in (9)
  • 2.52 in (8)
  • 2.559 in (8)
  • 2.598 in (9)
  • 2.638 in (6)
  • 2.677 in (7)
  • 2.717 in (3)
  • 2.757 in (10)
  • 2.795 in (5)
  • 2.835 in (5)
  • 2.874 in (3)
  • 2.914 in (6)
  • 2.953 in (4)
  • 2.992 in (4)
  • 3.031 in (5)
  • 3.071 in (7)
  • 3.11 in (5)
  • 3.15 in (7)
  • 3.189 in (7)
  • 3.228 in (7)
  • 3.269 in (5)
  • 3.307 in (4)
  • 3.346 in (3)
  • 3.386 in (2)
  • 3.426 in (5)
  • 3.504 in (2)
  • 3.543 in (1)
  • 3.583 in (2)
  • 3.622 in (1)
  • 3.701 in (1)
  • 3.74 in (1)
  • 3.781 in (1)
  • 3.858 in (1)
  • 3.938 in (1)
  • 3.976 in (1)
  • 4.094 in (2)
  • 4.173 in (1)
  • 4.213 in (2)
  • 4.252 in (1)
Reach Min to Reach Max
Reach
Reach
  • 26.0 mm (1)
  • 28.0 mm (1)
  • 29.0 mm (3)
  • 30.0 mm (4)
  • 31.0 mm (2)
  • 32.0 mm (1)
  • 33.0 mm (1)
  • 34.0 mm (1)
  • 35.0 mm (2)
  • 36.0 mm (3)
  • 37.0 mm (3)
  • 38.0 mm (2)
  • 39.0 mm (2)
  • 41.0 mm (6)
  • 42.0 mm (3)
  • 43.0 mm (4)
  • 44.0 mm (10)
  • 45.0 mm (6)
  • 46.0 mm (7)
  • 47.0 mm (5)
  • 48.0 mm (4)
  • 49.0 mm (6)
  • 50.0 mm (8)
  • 51.0 mm (6)
  • 52.0 mm (9)
  • 53.0 mm (5)
  • 54.0 mm (10)
  • 55.0 mm (5)
  • 56.0 mm (6)
  • 57.0 mm (6)
  • 58.0 mm (6)
  • 59.0 mm (8)
  • 60.0 mm (6)
  • 61.0 mm (7)
  • 62.0 mm (4)
  • 63.0 mm (9)
  • 64.0 mm (8)
  • 65.0 mm (8)
  • 66.0 mm (9)
  • 67.0 mm (6)
  • 68.0 mm (7)
  • 69.0 mm (3)
  • 70.0 mm (10)
  • 71.0 mm (5)
  • 72.0 mm (5)
  • 73.0 mm (3)
  • 74.0 mm (6)
  • 75.0 mm (4)
  • 76.0 mm (4)
  • 77.0 mm (5)
  • 78.0 mm (7)
  • 79.0 mm (5)
  • 80.0 mm (7)
  • 81.0 mm (7)
  • 82.0 mm (7)
  • 83.0 mm (5)
  • 84.0 mm (4)
  • 85.0 mm (3)
  • 86.0 mm (2)
  • 87.0 mm (5)
  • 89.0 mm (2)
  • 90.0 mm (1)
  • 91.0 mm (2)
  • 92.0 mm (1)
  • 94.0 mm (1)
  • 95.0 mm (1)
  • 96.0 mm (1)
  • 98.0 mm (1)
  • 100.0 mm (1)
  • 101.0 mm (1)
  • 104.0 mm (2)
  • 106.0 mm (1)
  • 107.0 mm (2)
  • 108.0 mm (1)
Reach Min to Reach Max
Connection Style
Connection Style
  • Cylindrical Shank 1 Flat (33)
  • Cylindrical Shank 2 Flats (60)
  • KM (155)
  • Whistle Drive 2 (39)
  • Whistle Notch 2 CylindricalEnd (38)
Number of Flutes
Number of Flutes
  • 2 (325)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (99)
  • 2.0 (385)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.016 in (61)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (61)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (61)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (61)
Corner Chamfer Min to Corner Chamfer Max
Application
Drilling Condition
Drilling Condition
  • Interrupted (345)
  • Stable (367)
  • Unstable (366)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC7020 (330)
  • KC7025 (328)
  • KC7140 (336)
  • KC7225 (331)
  • KC7315 (98)
  • KC7815 (331)
  • KC7820 (328)
  • KCMS35 (205)
  • KCPK10 (331)
  • KCU25 (334)
  • KCU40 (334)
  • KD1425 (99)
Hand Of Tool
Hand Of Tool
  • R (325)
Wiper Insert
Wiper Insert
  • N (61)
Drill Type
Drill Type
  • 86-01 (325)
Insert Geometry
Shape
Shape
  • B-PARALLELOGRAM 82 (61)
Insert IC Size
Insert IC Size
  • 6.0 mm (39)
  • 8.0 mm (21)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.237 in (39)
  • 0.315 in (21)
Insert IC Size Min to Insert IC Size Max
Chip Breaker CBMD
Chip Breaker CBMD
  • GD (25)
  • LD (21)