Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

KSEM PLUS™ Modular Drill System

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (280)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (280)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (280)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (280)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (280)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (280)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (271)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (271)
  • M Stainless Steel (279)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (279)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (279)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (265)
  • K Cast Iron (261)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (261)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (261)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (261)
  • N Non-Ferrous Materials (256)
    • N1
      Wrought Aluminum
      (255)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (255)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (255)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (241)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (250)
    • N6
      Carbon, Graphite Composites, CFRP
      (241)
    • N7
      MMC's
      (237)
  • S High-Temp Alloys (265)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (265)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (265)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (265)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (265)
  • H Hardened Materials (185)
    • H1
      Hardened Materials 44-48 HRC
      (185)
    • H2
      Hardened Materials 48-55 HRC
      (81)
    • H3
      Hardened Materials 56-60 HRC
      (81)
    • H4
      Hardened Materials >60 HRC
      (81)
Select First Choice
  • BR (4)
  • CN (180)
  • DE (171)
  • GB (83)
  • IN (26)
  • SG (60)
  • US (150)
Applications
Applications
  • Drilling Drilling (187)
  • Stacked Plates Drilling Stacked Plates Drilling (99)
Cutting Diameter
Cutting Diameter
  • 0.512 in (1)
  • 0.551 in (1)
  • 0.591 in (1)
  • 0.63 in (1)
  • 0.669 in (1)
  • 0.709 in (1)
  • 0.748 in (1)
  • 0.787 in (1)
  • 0.828 in (1)
  • 0.866 in (1)
  • 0.906 in (1)
  • 0.946 in (1)
  • 1.102 in (2)
  • 1.125 in (2)
  • 1.143 in (2)
  • 1.156 in (2)
  • 1.181 in (2)
  • 1.188 in (2)
  • 1.22 in (2)
  • 1.25 in (2)
  • 1.26 in (2)
  • 1.299 in (2)
  • 1.307 in (2)
  • 1.313 in (2)
  • 1.339 in (2)
  • 1.375 in (2)
  • 1.379 in (2)
  • 1.417 in (3)
  • 1.438 in (2)
  • 1.457 in (2)
  • 1.476 in (2)
  • 1.496 in (2)
  • 1.5 in (2)
  • 1.536 in (2)
  • 1.543 in (2)
  • 1.563 in (2)
  • 1.575 in (2)
  • 1.614 in (2)
  • 1.625 in (2)
  • 1.655 in (2)
  • 1.693 in (2)
  • 1.732 in (2)
  • 1.75 in (2)
  • 1.772 in (2)
  • 1.811 in (2)
  • 1.85 in (2)
  • 1.875 in (2)
  • 1.891 in (2)
  • 1.929 in (2)
  • 1.969 in (2)
  • 2.0 in (2)
  • 2.008 in (2)
  • 2.047 in (2)
  • 2.087 in (2)
  • 2.125 in (2)
  • 2.126 in (2)
  • 2.165 in (2)
  • 2.205 in (2)
  • 2.244 in (2)
  • 2.25 in (2)
  • 2.283 in (2)
  • 2.323 in (2)
  • 2.362 in (2)
  • 2.375 in (2)
  • 2.402 in (2)
  • 2.441 in (2)
  • 2.48 in (2)
  • 2.5 in (2)
  • 2.52 in (2)
  • 2.559 in (2)
  • 2.598 in (2)
  • 2.625 in (2)
  • 2.638 in (2)
  • 2.677 in (2)
  • 2.717 in (2)
  • 2.75 in (2)
  • 2.757 in (2)
  • 2.795 in (2)
  • 2.835 in (2)
  • 2.874 in (2)
  • 2.875 in (2)
  • 2.914 in (2)
  • 2.953 in (2)
  • 2.992 in (2)
  • 3.0 in (2)
  • 3.071 in (2)
  • 3.125 in (2)
  • 3.15 in (2)
  • 3.25 in (2)
  • 3.307 in (2)
  • 3.386 in (2)
  • 3.426 in (2)
  • 3.5 in (2)
  • 3.543 in (2)
  • 3.622 in (2)
  • 3.74 in (2)
  • 3.75 in (2)
  • 3.781 in (2)
  • 3.938 in (2)
  • 4.0 in (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 13.0 mm (1)
  • 14.0 mm (1)
  • 15.0 mm (1)
  • 16.0 mm (1)
  • 17.0 mm (1)
  • 18.0 mm (1)
  • 19.0 mm (1)
  • 20.0 mm (1)
  • 21.0 mm (1)
  • 22.0 mm (1)
  • 23.0 mm (1)
  • 24.0 mm (1)
  • 28.0 mm (2)
  • 28.576 mm (2)
  • 29.0 mm (2)
  • 29.35 mm (2)
  • 30.0 mm (2)
  • 30.175 mm (2)
  • 31.0 mm (2)
  • 31.75 mm (2)
  • 32.0 mm (2)
  • 33.0 mm (2)
  • 33.2 mm (2)
  • 33.35 mm (2)
  • 34.0 mm (2)
  • 34.926 mm (2)
  • 35.0 mm (2)
  • 36.0 mm (3)
  • 36.525 mm (2)
  • 37.0 mm (2)
  • 37.5 mm (2)
  • 38.0 mm (2)
  • 38.1 mm (2)
  • 39.0 mm (2)
  • 39.2 mm (2)
  • 39.7 mm (2)
  • 40.0 mm (2)
  • 41.0 mm (2)
  • 41.276 mm (2)
  • 42.0 mm (2)
  • 43.0 mm (2)
  • 44.0 mm (2)
  • 44.45 mm (2)
  • 45.0 mm (2)
  • 46.0 mm (2)
  • 47.0 mm (2)
  • 47.625 mm (2)
  • 48.0 mm (2)
  • 49.0 mm (2)
  • 50.0 mm (2)
  • 50.801 mm (2)
  • 51.0 mm (2)
  • 52.0 mm (2)
  • 53.0 mm (2)
  • 53.975 mm (2)
  • 54.0 mm (2)
  • 55.0 mm (2)
  • 56.0 mm (2)
  • 57.0 mm (2)
  • 57.151 mm (2)
  • 58.0 mm (2)
  • 59.0 mm (2)
  • 60.0 mm (2)
  • 60.325 mm (2)
  • 61.0 mm (2)
  • 62.0 mm (2)
  • 63.0 mm (2)
  • 63.5 mm (2)
  • 64.0 mm (2)
  • 65.0 mm (2)
  • 66.0 mm (2)
  • 66.675 mm (2)
  • 67.0 mm (2)
  • 68.0 mm (2)
  • 69.0 mm (2)
  • 69.851 mm (2)
  • 70.0 mm (2)
  • 71.0 mm (2)
  • 72.0 mm (2)
  • 73.0 mm (2)
  • 73.025 mm (2)
  • 74.0 mm (2)
  • 75.0 mm (2)
  • 76.0 mm (2)
  • 76.2 mm (2)
  • 78.0 mm (2)
  • 79.375 mm (2)
  • 80.0 mm (2)
  • 82.551 mm (2)
  • 84.0 mm (2)
  • 86.0 mm (2)
  • 87.0 mm (2)
  • 88.9 mm (2)
  • 90.0 mm (2)
  • 92.0 mm (2)
  • 95.0 mm (2)
  • 95.25 mm (2)
  • 96.0 mm (2)
  • 100.0 mm (2)
  • 101.601 mm (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Interrupted (72)
  • Stable (79)
  • Unstable (74)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 20.0 mm (17)
  • 22.0 mm (7)
  • 25.0 mm (37)
  • 30.0 mm (30)
  • 35.0 mm (17)
  • 36.0 mm (11)
  • 40.0 mm (19)
  • 45.0 mm (11)
  • 50.0 mm (10)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.787 in (17)
  • 0.866 in (7)
  • 0.984 in (37)
  • 1.181 in (30)
  • 1.379 in (17)
  • 1.417 in (11)
  • 1.575 in (19)
  • 1.772 in (11)
  • 1.969 in (10)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.787 in (17)
  • 0.866 in (7)
  • 0.917 in (9)
  • 0.935 in (8)
  • 0.944 in (7)
  • 0.984 in (13)
  • 1.101 in (6)
  • 1.114 in (7)
  • 1.181 in (17)
  • 1.272 in (9)
  • 1.298 in (8)
  • 1.417 in (11)
  • 1.469 in (11)
  • 1.491 in (9)
  • 1.518 in (9)
  • 1.666 in (13)
  • 1.703 in (7)
  • 1.863 in (3)
  • 1.885 in (9)
  • 1.901 in (2)
  • 1.911 in (5)
Reach Min to Reach Max
Reach
Reach
  • 20.0 mm (17)
  • 22.0 mm (7)
  • 23.3 mm (9)
  • 23.75 mm (8)
  • 23.951 mm (7)
  • 25.0 mm (13)
  • 27.975 mm (6)
  • 28.3 mm (7)
  • 30.0 mm (17)
  • 32.301 mm (9)
  • 32.975 mm (8)
  • 36.0 mm (11)
  • 37.301 mm (11)
  • 37.875 mm (9)
  • 38.526 mm (9)
  • 42.325 mm (13)
  • 43.25 mm (7)
  • 47.325 mm (3)
  • 47.875 mm (9)
  • 48.25 mm (2)
  • 48.526 mm (5)
Reach Min to Reach Max
Connection Style
Connection Style
  • FDS Connection (187)
Number of Flutes
Number of Flutes
  • 2 (187)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (201)
  • 1.0 (88)
  • 2.0 (140)
  • 3.0 (126)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.016 in (4)
  • 0.031 in (45)
  • 0.039 in (6)
  • 0.047 in (12)
  • 0.063 in (6)
  • 0.079 in (6)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (4)
  • 0.8 mm (45)
  • 1.0 mm (6)
  • 1.201 mm (12)
  • 1.6 mm (6)
  • 2.0 mm (6)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (93)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (93)
Corner Chamfer Min to Corner Chamfer Max
Application
Drilling Condition
Drilling Condition
  • Interrupted (259)
  • Stable (266)
  • Unstable (261)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CS5 (81)
  • K6 (20)
  • KC7020 (7)
  • KC7025 (7)
  • KC7030 (147)
  • KC7135 (22)
  • KC7140 (202)
  • KC720 (81)
  • KC7215 (81)
  • KC7225 (89)
  • KC7235 (10)
  • KC7315 (201)
  • KC7320 (4)
  • KC7410 (187)
  • KC7815 (88)
  • KC7820 (88)
  • KC7935 (81)
  • KC810 (81)
  • KC990 (81)
  • KCMS15 (187)
  • KCPK10 (88)
  • KCPM45 (187)
  • KCU25 (216)
  • KCU40 (221)
  • KD1425 (88)
  • KMF (81)
  • KU40D (81)
  • YYMISF (10)
Hand Of Tool
Hand Of Tool
  • R (187)
Wiper Insert
Wiper Insert
  • N (93)
Drill Type
Drill Type
  • 86-01 (187)
Front-End
Insert Shape
Insert Shape
  • B-PARALLELOGRAM 82 (11)
  • D-DIAMOND/RHOMBIC 90 (129)
  • KSEM DRILL (201)
  • X-TRIGON 84 (126)
Gage Length
Gage Length
  • 2.992 in (2)
  • 3.228 in (2)
  • 3.622 in (2)
  • 3.938 in (2)
  • 4.409 in (2)
  • 4.803 in (2)
  • 5.039 in (2)
  • 5.513 in (2)
  • 5.748 in (2)
  • 6.063 in (2)
  • 6.535 in (2)
  • 6.772 in (2)
  • 7.205 in (2)
  • 7.48 in (2)
  • 7.559 in (2)
  • 8.11 in (2)
  • 8.346 in (2)
  • 8.504 in (2)
  • 8.976 in (2)
  • 9.606 in (2)
  • 10.198 in (2)
  • 10.669 in (2)
  • 11.142 in (2)
  • 11.378 in (2)
  • 11.496 in (2)
  • 11.969 in (2)
  • 12.638 in (2)
  • 12.874 in (2)
  • 13.307 in (2)
  • 13.583 in (2)
  • 14.214 in (2)
  • 14.252 in (2)
  • 15.079 in (2)
  • 15.394 in (2)
  • 15.866 in (2)
  • 16.89 in (2)
  • 17.283 in (2)
  • 17.756 in (2)
  • 17.795 in (2)
  • 19.331 in (2)
  • 19.803 in (2)
  • 19.962 in (2)
  • 21.614 in (2)
  • 22.126 in (2)
  • 22.402 in (2)
  • 24.134 in (2)
  • 25.157 in (2)
  • 27.283 in (2)
  • 30.669 in (2)
Gage Length
Gage Length
  • 100 mm (2)
  • 112 mm (2)
  • 122 mm (2)
  • 128 mm (2)
  • 140 mm (2)
  • 146 mm (2)
  • 154 mm (2)
  • 166 mm (2)
  • 172 mm (2)
  • 183 mm (2)
  • 190 mm (2)
  • 192 mm (2)
  • 206 mm (2)
  • 212 mm (2)
  • 216 mm (2)
  • 228 mm (2)
  • 244 mm (2)
  • 259 mm (2)
  • 271 mm (2)
  • 283 mm (2)
  • 289 mm (2)
  • 292 mm (2)
  • 304 mm (2)
  • 321 mm (2)
  • 327 mm (2)
  • 338 mm (2)
  • 345 mm (2)
  • 361 mm (2)
  • 362 mm (2)
  • 383 mm (2)
  • 391 mm (2)
  • 403 mm (2)
  • 429 mm (2)
  • 439 mm (2)
  • 451 mm (2)
  • 452 mm (2)
  • 491 mm (2)
  • 503 mm (2)
  • 507 mm (2)
  • 549 mm (2)
  • 562 mm (2)
  • 569 mm (2)
  • 613 mm (2)
  • 639 mm (2)
  • 693 mm (2)
  • 76 mm (2)
  • 779 mm (2)
  • 82 mm (2)
  • 92 mm (2)
Point Angle
Point Angle
  • 140.0 (107)
Point Angle Min to Point Angle Max
Insert Geometry
Shape
Shape
  • B-PARALLELOGRAM 82 (4)
  • D-DIAMOND/RHOMBIC 90 (30)
  • KSEM DRILL (14)
  • X-TRIGON 84 (45)
Insert IC Size
Insert IC Size
  • 8.0 mm (14)
  • 10.0 mm (15)
  • 12.0 mm (10)
  • 15.0 mm (10)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.315 in (14)
  • 0.394 in (15)
  • 0.473 in (10)
  • 0.591 in (10)
Insert IC Size Min to Insert IC Size Max
Insert Seat Size
Insert Seat Size
  • 1 (3)
  • 2 (1)
  • 3 (3)
  • 4 (2)
  • 5 (1)
  • 9 (1)
  • A (1)
  • B (1)
  • C (1)
Cutting Edge Length
Cutting Edge Length
  • 5.301 mm (10)
  • 6.625 mm (15)
  • 7.95 mm (10)
  • 9.925 mm (10)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.209 in (10)
  • 0.261 in (15)
  • 0.313 in (10)
  • 0.391 in (10)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • DS (28)
  • GD (2)
  • HP (28)
  • HPF (5)
  • LD (1)
  • MD (15)
Cutting Tool Material
Cutting Tool Material
  • H W (93)
Cutting Diameter Insert
Cutting Diameter Insert
  • 0.512 in (1)
  • 0.551 in (1)
  • 0.591 in (1)
  • 0.63 in (1)
  • 0.669 in (1)
  • 0.709 in (1)
  • 0.748 in (1)
  • 0.787 in (1)
  • 0.828 in (1)
  • 0.866 in (1)
  • 0.906 in (1)
  • 0.946 in (1)
  • 0.984 in (1)
  • 1.417 in (1)
Cutting Diameter Insert Min to Cutting Diameter Insert Max
Cutting Diameter Insert
Cutting Diameter Insert
  • 13.0 mm (1)
  • 14.0 mm (1)
  • 15.0 mm (1)
  • 16.0 mm (1)
  • 17.0 mm (1)
  • 18.0 mm (1)
  • 19.0 mm (1)
  • 20.0 mm (1)
  • 21.0 mm (1)
  • 22.0 mm (1)
  • 23.0 mm (1)
  • 24.0 mm (1)
  • 25.0 mm (1)
  • 36.0 mm (1)
Cutting Diameter Insert Min