Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

BF System

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (188)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (188)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (188)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (188)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (188)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (188)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (188)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (188)
  • M Stainless Steel (94)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (94)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (94)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (75)
  • K Cast Iron (189)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (189)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (189)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (189)
  • N Non-Ferrous Materials (95)
    • N1
      Wrought Aluminum
      (95)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (95)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (95)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (95)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (95)
    • N6
      Carbon, Graphite Composites, CFRP
      (95)
    • N7
      MMC's
      (76)
  • S High-Temp Alloys (75)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (75)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (75)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (75)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (75)
  • H Hardened Materials (66)
    • H1
      Hardened Materials 44-48 HRC
      (66)
    • H2
      Hardened Materials 48-55 HRC
      (66)
    • H3
      Hardened Materials 56-60 HRC
      (66)
    • H4
      Hardened Materials >60 HRC
      (66)
Applications
Applications
  • Counterboring Counterboring (94)
  • Countersinking Countersinking (144)
  • Drilling Drilling (169)
  • Inclined Exit Drilling Inclined Exit Drilling (144)
  • Stacked Plates Drilling Stacked Plates Drilling (50)
Cutting Diameter
Cutting Diameter
  • 0.125 in (2)
  • 0.134 in (3)
  • 0.161 in (3)
  • 0.181 in (3)
  • 0.182 in (2)
  • 0.201 in (3)
  • 0.213 in (2)
  • 0.219 in (4)
  • 0.24 in (3)
  • 0.25 in (2)
  • 0.288 in (3)
  • 0.313 in (2)
  • 0.315 in (2)
  • 0.319 in (5)
  • 0.323 in (2)
  • 0.327 in (2)
  • 0.328 in (2)
  • 0.332 in (2)
  • 0.335 in (3)
  • 0.336 in (2)
  • 0.339 in (3)
  • 0.343 in (3)
  • 0.345 in (2)
  • 0.347 in (3)
  • 0.349 in (2)
  • 0.351 in (2)
  • 0.354 in (2)
  • 0.358 in (4)
  • 0.359 in (2)
  • 0.368 in (2)
  • 0.37 in (2)
  • 0.386 in (2)
  • 0.391 in (2)
  • 0.394 in (3)
  • 0.395 in (2)
  • 0.397 in (2)
  • 0.398 in (4)
  • 0.402 in (3)
  • 0.404 in (2)
  • 0.406 in (3)
  • 0.408 in (4)
  • 0.41 in (3)
  • 0.414 in (4)
  • 0.417 in (2)
  • 0.421 in (2)
  • 0.425 in (2)
  • 0.433 in (2)
  • 0.437 in (6)
  • 0.441 in (2)
  • 0.453 in (3)
  • 0.461 in (2)
  • 0.465 in (2)
  • 0.47 in (2)
  • 0.473 in (2)
  • 0.48 in (4)
  • 0.484 in (2)
  • 0.492 in (2)
  • 0.504 in (2)
  • 0.512 in (2)
  • 0.516 in (4)
  • 0.52 in (2)
  • 0.531 in (2)
  • 0.551 in (4)
  • 0.555 in (5)
  • 0.559 in (4)
  • 0.564 in (4)
  • 0.568 in (3)
  • 0.572 in (2)
  • 0.576 in (2)
  • 0.578 in (2)
  • 0.579 in (2)
  • 0.583 in (2)
  • 0.587 in (2)
  • 0.591 in (3)
  • 0.594 in (2)
  • 0.595 in (2)
  • 0.598 in (2)
  • 0.602 in (2)
  • 0.605 in (2)
  • 0.606 in (2)
  • 0.609 in (2)
  • 0.61 in (5)
  • 0.614 in (2)
  • 0.618 in (2)
  • 0.622 in (2)
  • 0.625 in (4)
  • 0.628 in (2)
  • 0.63 in (3)
  • 0.631 in (2)
  • 0.633 in (2)
  • 0.634 in (2)
  • 0.638 in (2)
  • 0.641 in (2)
  • 0.642 in (2)
  • 0.646 in (2)
  • 0.65 in (5)
  • 0.656 in (3)
  • 0.669 in (3)
  • 0.689 in (3)
  • 0.69 in (5)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 3.176 mm (2)
  • 3.401 mm (3)
  • 4.101 mm (3)
  • 4.601 mm (3)
  • 4.625 mm (2)
  • 5.101 mm (3)
  • 5.4 mm (2)
  • 5.551 mm (4)
  • 6.101 mm (3)
  • 6.351 mm (2)
  • 7.301 mm (3)
  • 7.95 mm (2)
  • 8.0 mm (2)
  • 8.1 mm (5)
  • 8.201 mm (2)
  • 8.3 mm (2)
  • 8.326 mm (2)
  • 8.425 mm (2)
  • 8.5 mm (3)
  • 8.525 mm (2)
  • 8.6 mm (3)
  • 8.701 mm (3)
  • 8.725 mm (2)
  • 8.8 mm (3)
  • 8.85 mm (2)
  • 8.9 mm (2)
  • 9.0 mm (2)
  • 9.1 mm (4)
  • 9.125 mm (2)
  • 9.35 mm (2)
  • 9.4 mm (2)
  • 9.8 mm (2)
  • 9.925 mm (2)
  • 10.0 mm (3)
  • 10.025 mm (2)
  • 10.076 mm (2)
  • 10.101 mm (4)
  • 10.201 mm (3)
  • 10.25 mm (2)
  • 10.3 mm (3)
  • 10.326 mm (4)
  • 10.4 mm (3)
  • 10.5 mm (4)
  • 10.601 mm (2)
  • 10.701 mm (2)
  • 10.8 mm (2)
  • 11.0 mm (2)
  • 11.101 mm (6)
  • 11.201 mm (2)
  • 11.5 mm (3)
  • 11.701 mm (2)
  • 11.8 mm (2)
  • 11.9 mm (2)
  • 12.0 mm (2)
  • 12.201 mm (4)
  • 12.3 mm (2)
  • 12.5 mm (2)
  • 12.8 mm (2)
  • 13.0 mm (2)
  • 13.101 mm (4)
  • 13.201 mm (2)
  • 13.5 mm (2)
  • 14.0 mm (4)
  • 14.101 mm (5)
  • 14.201 mm (4)
  • 14.3 mm (4)
  • 14.4 mm (3)
  • 14.5 mm (2)
  • 14.601 mm (2)
  • 14.675 mm (2)
  • 14.701 mm (2)
  • 14.8 mm (2)
  • 14.9 mm (2)
  • 15.0 mm (3)
  • 15.076 mm (2)
  • 15.101 mm (2)
  • 15.201 mm (2)
  • 15.3 mm (2)
  • 15.375 mm (2)
  • 15.4 mm (2)
  • 15.476 mm (2)
  • 15.5 mm (5)
  • 15.601 mm (2)
  • 15.701 mm (2)
  • 15.8 mm (2)
  • 15.875 mm (4)
  • 15.951 mm (2)
  • 16.0 mm (3)
  • 16.026 mm (2)
  • 16.075 mm (2)
  • 16.1 mm (2)
  • 16.2 mm (2)
  • 16.276 mm (2)
  • 16.3 mm (2)
  • 16.401 mm (2)
  • 16.5 mm (5)
  • 16.675 mm (3)
  • 17.0 mm (3)
  • 17.475 mm (3)
  • 17.5 mm (5)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 8.6 mm (1)
  • 10.0 mm (1)
  • 10.601 mm (1)
  • 12.3 mm (1)
  • 13.3 mm (1)
  • 13.4 mm (1)
  • 13.701 mm (1)
  • 14.201 mm (1)
  • 14.701 mm (1)
  • 15.601 mm (1)
  • 15.8 mm (1)
  • 15.9 mm (1)
  • 16.6 mm (1)
  • 17.6 mm (1)
  • 17.8 mm (1)
  • 18.2 mm (1)
  • 18.6 mm (1)
  • 19.0 mm (1)
  • 19.3 mm (1)
  • 19.401 mm (2)
  • 19.5 mm (1)
  • 20.3 mm (1)
  • 21.0 mm (1)
  • 21.1 mm (1)
  • 21.5 mm (1)
  • 22.0 mm (1)
  • 22.201 mm (1)
  • 22.5 mm (1)
  • 22.6 mm (1)
  • 22.901 mm (1)
  • 23.201 mm (1)
  • 23.401 mm (1)
  • 23.5 mm (1)
  • 23.901 mm (1)
  • 24.201 mm (1)
  • 24.6 mm (1)
  • 24.901 mm (1)
  • 25.3 mm (1)
  • 25.401 mm (1)
  • 25.5 mm (1)
  • 26.201 mm (1)
  • 26.5 mm (1)
  • 26.6 mm (2)
  • 26.8 mm (2)
  • 27.0 mm (1)
  • 27.1 mm (1)
  • 27.5 mm (1)
  • 27.701 mm (1)
  • 28.0 mm (1)
  • 28.3 mm (1)
  • 28.5 mm (2)
  • 28.8 mm (1)
  • 29.1 mm (1)
  • 29.5 mm (1)
  • 29.6 mm (1)
  • 30.0 mm (1)
  • 30.701 mm (1)
  • 31.0 mm (1)
  • 31.201 mm (2)
  • 31.401 mm (1)
  • 31.5 mm (2)
  • 31.701 mm (1)
  • 31.901 mm (1)
  • 32.2 mm (1)
  • 32.4 mm (1)
  • 32.7 mm (1)
  • 32.9 mm (2)
  • 33.0 mm (1)
  • 33.1 mm (2)
  • 33.801 mm (2)
  • 34.301 mm (1)
  • 34.5 mm (2)
  • 34.801 mm (1)
  • 34.9 mm (1)
  • 35.0 mm (1)
  • 35.551 mm (1)
  • 36.0 mm (2)
  • 36.301 mm (1)
  • 36.7 mm (1)
  • 36.9 mm (1)
  • 37.6 mm (1)
  • 38.5 mm (1)
  • 38.6 mm (1)
  • 38.7 mm (1)
  • 39.0 mm (1)
  • 40.2 mm (1)
  • 40.5 mm (1)
  • 40.7 mm (1)
  • 41.401 mm (1)
  • 41.7 mm (1)
  • 42.0 mm (1)
  • 42.2 mm (1)
  • 43.1 mm (1)
  • 43.5 mm (2)
  • 43.6 mm (1)
  • 44.5 mm (1)
  • 45.0 mm (1)
  • 48.0 mm (2)
  • 50.0 mm (1)
  • 51.0 mm (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.339 in (1)
  • 0.394 in (1)
  • 0.417 in (1)
  • 0.484 in (1)
  • 0.524 in (1)
  • 0.528 in (1)
  • 0.539 in (1)
  • 0.559 in (1)
  • 0.579 in (1)
  • 0.614 in (1)
  • 0.622 in (1)
  • 0.626 in (1)
  • 0.654 in (1)
  • 0.694 in (1)
  • 0.702 in (1)
  • 0.717 in (1)
  • 0.732 in (1)
  • 0.748 in (1)
  • 0.76 in (1)
  • 0.764 in (2)
  • 0.768 in (1)
  • 0.799 in (1)
  • 0.828 in (1)
  • 0.832 in (1)
  • 0.846 in (1)
  • 0.866 in (1)
  • 0.874 in (1)
  • 0.886 in (1)
  • 0.89 in (1)
  • 0.902 in (1)
  • 0.913 in (1)
  • 0.921 in (1)
  • 0.925 in (1)
  • 0.942 in (1)
  • 0.954 in (1)
  • 0.969 in (1)
  • 0.98 in (1)
  • 0.996 in (1)
  • 1.0 in (1)
  • 1.004 in (1)
  • 1.032 in (1)
  • 1.043 in (1)
  • 1.047 in (2)
  • 1.055 in (2)
  • 1.063 in (1)
  • 1.067 in (1)
  • 1.083 in (1)
  • 1.091 in (1)
  • 1.102 in (1)
  • 1.114 in (1)
  • 1.122 in (2)
  • 1.135 in (1)
  • 1.147 in (1)
  • 1.161 in (1)
  • 1.165 in (1)
  • 1.181 in (1)
  • 1.209 in (1)
  • 1.22 in (1)
  • 1.228 in (2)
  • 1.236 in (1)
  • 1.24 in (2)
  • 1.248 in (1)
  • 1.256 in (1)
  • 1.268 in (1)
  • 1.276 in (1)
  • 1.287 in (1)
  • 1.295 in (2)
  • 1.299 in (1)
  • 1.303 in (2)
  • 1.331 in (2)
  • 1.35 in (1)
  • 1.358 in (2)
  • 1.37 in (1)
  • 1.374 in (1)
  • 1.379 in (1)
  • 1.401 in (1)
  • 1.417 in (2)
  • 1.429 in (1)
  • 1.445 in (1)
  • 1.453 in (1)
  • 1.48 in (1)
  • 1.516 in (1)
  • 1.52 in (1)
  • 1.524 in (1)
  • 1.536 in (1)
  • 1.583 in (1)
  • 1.594 in (1)
  • 1.602 in (1)
  • 1.631 in (1)
  • 1.643 in (1)
  • 1.655 in (1)
  • 1.661 in (1)
  • 1.697 in (1)
  • 1.713 in (2)
  • 1.717 in (1)
  • 1.752 in (1)
  • 1.772 in (1)
  • 1.891 in (2)
  • 1.969 in (1)
  • 2.008 in (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.654 in (1)
  • 0.717 in (1)
  • 0.744 in (1)
  • 0.824 in (1)
  • 0.866 in (1)
  • 0.878 in (1)
  • 0.894 in (1)
  • 0.917 in (1)
  • 0.942 in (1)
  • 0.984 in (1)
  • 1.004 in (1)
  • 1.008 in (1)
  • 1.043 in (1)
  • 1.091 in (1)
  • 1.102 in (1)
  • 1.122 in (1)
  • 1.143 in (1)
  • 1.161 in (1)
  • 1.181 in (1)
  • 1.189 in (1)
  • 1.193 in (1)
  • 1.201 in (1)
  • 1.24 in (1)
  • 1.276 in (1)
  • 1.283 in (1)
  • 1.303 in (1)
  • 1.327 in (1)
  • 1.339 in (1)
  • 1.354 in (1)
  • 1.358 in (1)
  • 1.374 in (1)
  • 1.391 in (1)
  • 1.399 in (1)
  • 1.407 in (1)
  • 1.425 in (1)
  • 1.437 in (1)
  • 1.476 in (1)
  • 1.492 in (1)
  • 1.512 in (1)
  • 1.516 in (1)
  • 1.559 in (1)
  • 1.575 in (1)
  • 1.579 in (1)
  • 1.591 in (1)
  • 1.598 in (1)
  • 1.606 in (2)
  • 1.622 in (1)
  • 1.647 in (1)
  • 1.655 in (1)
  • 1.669 in (1)
  • 1.685 in (1)
  • 1.693 in (1)
  • 1.697 in (1)
  • 1.728 in (1)
  • 1.732 in (1)
  • 1.768 in (1)
  • 1.776 in (2)
  • 1.831 in (1)
  • 1.846 in (1)
  • 1.858 in (1)
  • 1.862 in (1)
  • 1.879 in (1)
  • 1.891 in (1)
  • 1.895 in (1)
  • 1.907 in (1)
  • 1.913 in (1)
  • 1.929 in (1)
  • 1.941 in (1)
  • 1.945 in (1)
  • 1.957 in (1)
  • 1.98 in (1)
  • 1.988 in (2)
  • 2.0 in (1)
  • 2.028 in (1)
  • 2.035 in (2)
  • 2.063 in (1)
  • 2.075 in (1)
  • 2.091 in (1)
  • 2.098 in (1)
  • 2.11 in (1)
  • 2.114 in (1)
  • 2.15 in (1)
  • 2.189 in (1)
  • 2.193 in (1)
  • 2.213 in (1)
  • 2.232 in (1)
  • 2.269 in (1)
  • 2.323 in (1)
  • 2.339 in (1)
  • 2.35 in (1)
  • 2.358 in (1)
  • 2.43 in (1)
  • 2.441 in (1)
  • 2.48 in (1)
  • 2.493 in (1)
  • 2.52 in (1)
  • 2.535 in (1)
  • 2.606 in (2)
  • 2.685 in (2)
  • 2.85 in (2)
Reach Min