Welcome
Please confirm your preferences
Update Preferences

Product Suggestions

Product Family suggestions

Contact a Kennametal Expert

Call (833) 893-1514

Call Now

Customer Support

Find customer support centers around the globe.

Quick Order
Item(s) successfully added to cart
View Cart

Material specific HPX edge preparation
A straight cutting edge reduces build-up and chipping on cutting edge and margin land. 

Material-specific HPX drill point
Patented HPX point provides excellent self-centering capabilities, reduces thrust, and enables precise center chip formation.

Material-specific HPX margins 
2 margin lands provide stability, reduce friction.

The HPX drill design
Up to 3 times higher cutting parameters, saving machining time and freeing up capacity.

Ultra-high polished chip flutes reduce friction, improve chip evacuation, and increase tool life.

A continuous chip-flute cross-section reduces vibrations and reduces cutting edge chipping. 

Standard MQL backend

Up to 8xD drilling

Corner Chamfer - Build-in cutting edge corner protection, reduces chipping and extends tool life.

140˚ point angle – For ideal cutting conditions.  Perfect for pilot drilling of deep holes.

2 margin lands for stability and less friction.

Straight cutting edge – Reduces build-up and chipping on cutting edge and margin land.

 

Lower forces, even better reliability

The HPX drill produces consistently higher tool life in steel than competitive tools, even when feeds and speeds are significantly increased.

Special gashing on the HPX drill improves the chip formation and curls a smaller chip. The material specific HPX point geometry creates significantly lower cutting forces, which works great for machines with lower spindle capabilities, unstable cutting conditions, or unstable workpiece clamping. A continuous cross section makes the HPX drill more resistant against tool breakage, and the ultrahigh polished chip flutes ensure superior chip evacuation.

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (800)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (800)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (800)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (800)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (800)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (800)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (800)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (800)
  • K Cast Iron (170)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (170)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (170)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (170)
Applications
Applications
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (800)
  • Drilling Drilling (800)
  • Stacked Plates Drilling Stacked Plates Drilling (800)
Cutting Diameter
Cutting Diameter
  • 0.0 in (1)
  • 0.119 in (5)
  • 0.12 in (5)
  • 0.122 in (5)
  • 0.125 in (7)
  • 0.126 in (6)
  • 0.129 in (7)
  • 0.13 in (5)
  • 0.134 in (5)
  • 0.136 in (7)
  • 0.138 in (6)
  • 0.142 in (6)
  • 0.143 in (5)
  • 0.145 in (1)
  • 0.146 in (5)
  • 0.15 in (6)
  • 0.154 in (5)
  • 0.156 in (7)
  • 0.157 in (7)
  • 0.159 in (4)
  • 0.161 in (6)
  • 0.165 in (7)
  • 0.166 in (2)
  • 0.169 in (5)
  • 0.173 in (3)
  • 0.174 in (5)
  • 0.177 in (7)
  • 0.181 in (6)
  • 0.182 in (1)
  • 0.185 in (6)
  • 0.188 in (7)
  • 0.189 in (6)
  • 0.191 in (2)
  • 0.193 in (5)
  • 0.197 in (7)
  • 0.199 in (1)
  • 0.201 in (13)
  • 0.203 in (7)
  • 0.206 in (7)
  • 0.209 in (5)
  • 0.213 in (12)
  • 0.217 in (7)
  • 0.219 in (7)
  • 0.221 in (6)
  • 0.224 in (5)
  • 0.228 in (10)
  • 0.232 in (5)
  • 0.234 in (3)
  • 0.237 in (7)
  • 0.24 in (6)
  • 0.244 in (6)
  • 0.248 in (5)
  • 0.25 in (7)
  • 0.252 in (5)
  • 0.256 in (7)
  • 0.257 in (4)
  • 0.26 in (6)
  • 0.264 in (5)
  • 0.266 in (7)
  • 0.268 in (7)
  • 0.272 in (6)
  • 0.276 in (7)
  • 0.28 in (5)
  • 0.281 in (7)
  • 0.284 in (5)
  • 0.288 in (5)
  • 0.291 in (6)
  • 0.295 in (5)
  • 0.297 in (7)
  • 0.299 in (2)
  • 0.303 in (2)
  • 0.307 in (6)
  • 0.311 in (2)
  • 0.313 in (7)
  • 0.315 in (7)
  • 0.319 in (6)
  • 0.323 in (5)
  • 0.327 in (2)
  • 0.328 in (7)
  • 0.331 in (3)
  • 0.332 in (1)
  • 0.335 in (7)
  • 0.339 in (3)
  • 0.343 in (5)
  • 0.345 in (7)
  • 0.347 in (6)
  • 0.351 in (2)
  • 0.354 in (7)
  • 0.358 in (4)
  • 0.359 in (7)
  • 0.362 in (2)
  • 0.366 in (3)
  • 0.368 in (3)
  • 0.37 in (5)
  • 0.374 in (6)
  • 0.375 in (7)
  • 0.378 in (2)
  • 0.382 in (2)
  • 0.384 in (1)
  • 0.386 in (6)
  • 0.39 in (2)
  • 0.391 in (4)
  • 0.394 in (7)
  • 0.398 in (2)
  • 0.402 in (6)
  • 0.406 in (6)
  • 0.408 in (7)
  • 0.41 in (3)
  • 0.414 in (7)
  • 0.417 in (2)
  • 0.421 in (2)
  • 0.422 in (7)
  • 0.425 in (5)
  • 0.433 in (6)
  • 0.437 in (2)
  • 0.438 in (7)
  • 0.441 in (2)
  • 0.445 in (2)
  • 0.449 in (2)
  • 0.453 in (13)
  • 0.457 in (2)
  • 0.461 in (2)
  • 0.465 in (3)
  • 0.47 in (6)
  • 0.473 in (7)
  • 0.477 in (2)
  • 0.48 in (2)
  • 0.484 in (6)
  • 0.488 in (2)
  • 0.492 in (6)
  • 0.496 in (2)
  • 0.5 in (7)
  • 0.504 in (2)
  • 0.508 in (2)
  • 0.512 in (6)
  • 0.516 in (3)
  • 0.524 in (2)
  • 0.531 in (7)
  • 0.539 in (2)
  • 0.543 in (3)
  • 0.551 in (7)
  • 0.555 in (2)
  • 0.559 in (2)
  • 0.564 in (9)
  • 0.572 in (5)
  • 0.576 in (2)
  • 0.579 in (2)
  • 0.591 in (5)
  • 0.595 in (2)
  • 0.602 in (2)
  • 0.61 in (5)
  • 0.614 in (2)
  • 0.618 in (2)
  • 0.622 in (2)
  • 0.625 in (7)
  • 0.63 in (5)
  • 0.634 in (1)
  • 0.65 in (5)
  • 0.656 in (2)
  • 0.669 in (5)
  • 0.689 in (2)
  • 0.69 in (5)
  • 0.698 in (2)
  • 0.709 in (5)
  • 0.728 in (4)
  • 0.748 in (4)
  • 0.75 in (2)
  • 0.768 in (2)
  • 0.787 in (4)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.0 mm (1)
  • 3.0 mm (5)
  • 3.051 mm (5)
  • 3.1 mm (5)
  • 3.176 mm (7)
  • 3.2 mm (6)
  • 3.276 mm (7)
  • 3.301 mm (5)
  • 3.401 mm (5)
  • 3.45 mm (7)
  • 3.5 mm (6)
  • 3.575 mm (6)
  • 3.6 mm (5)
  • 3.651 mm (1)
  • 3.7 mm (5)
  • 3.801 mm (6)
  • 3.901 mm (5)
  • 3.975 mm (7)
  • 4.0 mm (7)
  • 4.05 mm (4)
  • 4.101 mm (6)
  • 4.2 mm (7)
  • 4.226 mm (2)
  • 4.3 mm (5)
  • 4.375 mm (3)
  • 4.4 mm (5)
  • 4.5 mm (7)
  • 4.601 mm (6)
  • 4.625 mm (1)
  • 4.7 mm (6)
  • 4.775 mm (7)
  • 4.801 mm (6)
  • 4.851 mm (2)
  • 4.9 mm (5)
  • 5.0 mm (7)
  • 5.051 mm (1)
  • 5.101 mm (13)
  • 5.15 mm (7)
  • 5.2 mm (7)
  • 5.301 mm (5)
  • 5.4 mm (12)
  • 5.5 mm (7)
  • 5.551 mm (7)
  • 5.601 mm (6)
  • 5.7 mm (5)
  • 5.801 mm (10)
  • 5.9 mm (5)
  • 5.95 mm (3)
  • 6.0 mm (7)
  • 6.101 mm (6)
  • 6.2 mm (6)
  • 6.301 mm (5)
  • 6.351 mm (7)
  • 6.4 mm (5)
  • 6.5 mm (7)
  • 6.525 mm (4)
  • 6.601 mm (6)
  • 6.7 mm (5)
  • 6.75 mm (7)
  • 6.801 mm (7)
  • 6.9 mm (6)
  • 7.0 mm (7)
  • 7.101 mm (5)
  • 7.15 mm (7)
  • 7.2 mm (5)
  • 7.301 mm (5)
  • 7.4 mm (6)
  • 7.5 mm (5)
  • 7.551 mm (7)
  • 7.601 mm (2)
  • 7.7 mm (2)
  • 7.801 mm (6)
  • 7.9 mm (2)
  • 7.95 mm (7)
  • 8.0 mm (7)
  • 8.1 mm (6)
  • 8.201 mm (5)
  • 8.3 mm (2)
  • 8.326 mm (7)
  • 8.4 mm (3)
  • 8.425 mm (1)
  • 8.5 mm (7)
  • 8.6 mm (3)
  • 8.701 mm (5)
  • 8.725 mm (7)
  • 8.8 mm (6)
  • 8.9 mm (2)
  • 9.0 mm (7)
  • 9.1 mm (4)
  • 9.125 mm (7)
  • 9.201 mm (2)
  • 9.3 mm (3)
  • 9.35 mm (3)
  • 9.4 mm (5)
  • 9.5 mm (6)
  • 9.525 mm (7)
  • 9.601 mm (2)
  • 9.701 mm (2)
  • 9.75 mm (1)
  • 9.8 mm (6)
  • 9.9 mm (2)
  • 9.925 mm (4)
  • 10.0 mm (7)
  • 10.101 mm (2)
  • 10.201 mm (6)
  • 10.3 mm (6)
  • 10.326 mm (7)
  • 10.4 mm (3)
  • 10.5 mm (7)
  • 10.601 mm (2)
  • 10.701 mm (2)
  • 10.726 mm (7)
  • 10.8 mm (5)
  • 11.0 mm (6)
  • 11.101 mm (2)
  • 11.125 mm (7)
  • 11.201 mm (2)
  • 11.3 mm (2)
  • 11.4 mm (2)
  • 11.5 mm (13)
  • 11.601 mm (2)
  • 11.701 mm (2)
  • 11.8 mm (3)
  • 11.9 mm (6)
  • 12.0 mm (7)
  • 12.101 mm (2)
  • 12.201 mm (2)
  • 12.3 mm (6)
  • 12.4 mm (2)
  • 12.5 mm (6)
  • 12.601 mm (2)
  • 12.701 mm (7)
  • 12.8 mm (2)
  • 12.9 mm (2)
  • 13.0 mm (6)
  • 13.101 mm (3)
  • 13.3 mm (2)
  • 13.5 mm (7)
  • 13.701 mm (2)
  • 13.8 mm (3)
  • 14.0 mm (7)
  • 14.101 mm (2)
  • 14.201 mm (2)
  • 14.3 mm (9)
  • 14.5 mm (5)
  • 14.601 mm (2)
  • 14.701 mm (2)
  • 15.0 mm (5)
  • 15.101 mm (2)
  • 15.3 mm (2)
  • 15.5 mm (5)
  • 15.601 mm (2)
  • 15.701 mm (2)
  • 15.8 mm (2)
  • 15.875 mm (7)
  • 16.0 mm (5)
  • 16.1 mm (1)
  • 16.5 mm (5)
  • 16.675 mm (2)
  • 17.0 mm (5)
  • 17.475 mm (2)
  • 17.5 mm (5)
  • 17.7 mm (2)
  • 18.0 mm (5)
  • 18.5 mm (4)
  • 19.0 mm (4)
  • 19.05 mm (2)
  • 19.5 mm (2)
  • 20.0 mm (4)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 14.0 mm (28)
  • 17.0 mm (27)
  • 17.401 mm (4)
  • 20.0 mm (41)
  • 21.401 mm (8)
  • 22.6 mm (2)
  • 23.0 mm (26)
  • 24.0 mm (24)
  • 25.901 mm (5)
  • 28.3 mm (5)
  • 28.6 mm (8)
  • 29.0 mm (52)
  • 33.0 mm (13)
  • 34.7 mm (4)
  • 34.9 mm (12)
  • 35.0 mm (88)
  • 38.1 mm (4)
  • 39.6 mm (4)
  • 40.0 mm (35)
  • 40.301 mm (9)
  • 41.0 mm (10)
  • 43.0 mm (80)
  • 45.0 mm (22)
  • 46.5 mm (1)
  • 48.0 mm (18)
  • 48.7 mm (10)
  • 49.0 mm (51)
  • 51.0 mm (10)
  • 53.1 mm (6)
  • 55.0 mm (8)
  • 55.6 mm (5)
  • 56.0 mm (43)
  • 57.0 mm (12)
  • 60.0 mm (31)
  • 63.0 mm (22)
  • 64.0 mm (10)
  • 64.5 mm (1)
  • 71.0 mm (12)
  • 73.0 mm (1)
  • 77.0 mm (8)
  • 80.0 mm (14)
  • 96.0 mm (11)
  • 112.0 mm (5)
  • 128.0 mm (6)
  • 144.0 mm (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.551 in (28)
  • 0.669 in (27)
  • 0.685 in (4)
  • 0.787 in (41)
  • 0.843 in (8)
  • 0.89 in (2)
  • 0.906 in (26)
  • 0.946 in (24)
  • 1.02 in (5)
  • 1.114 in (5)
  • 1.127 in (8)
  • 1.143 in (52)
  • 1.299 in (13)
  • 1.366 in (4)
  • 1.374 in (12)
  • 1.379 in (88)
  • 1.5 in (4)
  • 1.559 in (4)
  • 1.575 in (35)
  • 1.587 in (9)
  • 1.614 in (10)
  • 1.693 in (80)
  • 1.772 in (22)
  • 1.831 in (1)
  • 1.891 in (18)
  • 1.917 in (10)
  • 1.929 in (51)
  • 2.008 in (10)
  • 2.091 in (6)
  • 2.165 in (8)
  • 2.189 in (5)
  • 2.205 in (43)
  • 2.244 in (12)
  • 2.362 in (31)
  • 2.48 in (22)
  • 2.52 in (10)
  • 2.539 in (1)
  • 2.795 in (12)
  • 2.874 in (1)
  • 3.031 in (8)
  • 3.15 in (14)
  • 3.781 in (11)
  • 4.409 in (5)
  • 5.039 in (6)
  • 5.67 in (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.787 in (28)
  • 0.906 in (4)
  • 0.946 in (27)
  • 1.063 in (8)
  • 1.102 in (67)
  • 1.143 in (2)
  • 1.339 in (29)
  • 1.379 in (8)
  • 1.417 in (29)
  • 1.496 in (5)
  • 1.575 in (13)
  • 1.614 in (23)
  • 1.693 in (12)
  • 1.732 in (47)
  • 1.811 in (4)
  • 1.85 in (41)
  • 1.929 in (10)
  • 1.969 in (9)
  • 2.008 in (4)
  • 2.087 in (57)
  • 2.126 in (4)
  • 2.165 in (35)
  • 2.205 in (18)
  • 2.323 in (1)
  • 2.362 in (32)
  • 2.402 in (51)
  • 2.52 in (1)
  • 2.559 in (22)
  • 2.598 in (6)
  • 2.638 in (12)
  • 2.757 in (5)
  • 2.795 in (43)
  • 2.874 in (10)
  • 2.914 in (10)
  • 2.992 in (4)
  • 3.031 in (27)
  • 3.11 in (8)
  • 3.228 in (1)
  • 3.269 in (22)
  • 3.622 in (15)
  • 3.661 in (12)
  • 3.976 in (8)
  • 4.331 in (11)
  • 5.039 in (5)
  • 5.748 in (6)
  • 6.417 in (4)
Reach Min to Reach Max
Reach
Reach
  • 20.0 mm (28)
  • 23.0 mm (4)
  • 24.0 mm (27)
  • 27.0 mm (8)
  • 28.0 mm (67)
  • 29.0 mm (2)
  • 34.0 mm (29)
  • 35.0 mm (8)
  • 36.0 mm (29)
  • 38.0 mm (5)
  • 40.0 mm (13)
  • 41.0 mm (23)
  • 43.0 mm (12)
  • 44.0 mm (47)
  • 46.0 mm (4)
  • 47.0 mm (41)
  • 49.0 mm (10)
  • 50.0 mm (9)
  • 51.0 mm (4)
  • 53.0 mm (57)
  • 54.0 mm (4)
  • 55.0 mm (35)
  • 56.0 mm (18)
  • 59.0 mm (1)
  • 60.0 mm (32)
  • 61.0 mm (51)
  • 64.0 mm (1)
  • 65.0 mm (22)
  • 66.0 mm (6)
  • 67.0 mm (12)
  • 70.0 mm (5)
  • 71.0 mm (43)
  • 73.0 mm (10)
  • 74.0 mm (10)
  • 76.0 mm (4)
  • 77.0 mm (27)
  • 79.0 mm (8)
  • 82.0 mm (1)
  • 83.0 mm (22)
  • 92.0 mm (15)
  • 93.0 mm (12)
  • 101.0 mm (8)
  • 110.0 mm (11)
  • 128.0 mm (5)
  • 146.0 mm (6)
  • 163.0 mm (4)
Reach Min to Reach Max
Connection Style
Connection Style
  • Straight-Cylindrical (755)
  • Whistle Notch 2 CylindricalEnd (45)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 2.441 in (28)
  • 2.48 in (4)
  • 2.598 in (102)
  • 2.677 in (2)
  • 2.874 in (5)
  • 2.914 in (37)
  • 3.071 in (13)
  • 3.11 in (52)
  • 3.228 in (59)
  • 3.426 in (10)
  • 3.504 in (45)
  • 3.583 in (66)
  • 3.701 in (18)
  • 3.781 in (4)
  • 4.016 in (39)
  • 4.055 in (61)
  • 4.134 in (12)
  • 4.213 in (23)
  • 4.37 in (6)
  • 4.449 in (10)
  • 4.529 in (23)
  • 4.646 in (48)
  • 4.843 in (10)
  • 4.882 in (31)
  • 5.157 in (8)
  • 5.236 in (23)
  • 5.315 in (14)
  • 5.63 in (13)
  • 6.024 in (8)
  • 6.22 in (11)
  • 6.929 in (5)
  • 7.756 in (6)
  • 8.425 in (4)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 62.0 mm (28)
  • 63.0 mm (4)
  • 66.0 mm (102)
  • 68.0 mm (2)
  • 73.0 mm (5)
  • 74.0 mm (37)
  • 78.0 mm (13)
  • 79.0 mm (52)
  • 82.0 mm (59)
  • 87.0 mm (10)
  • 89.0 mm (45)
  • 91.0 mm (66)
  • 94.0 mm (18)
  • 96.0 mm (4)
  • 102.0 mm (39)
  • 103.0 mm (61)
  • 105.0 mm (12)
  • 107.0 mm (23)
  • 111.0 mm (6)
  • 113.0 mm (10)
  • 115.0 mm (23)
  • 118.0 mm (48)
  • 123.0 mm (10)
  • 124.0 mm (31)
  • 131.0 mm (8)
  • 133.0 mm (23)
  • 135.0 mm (14)
  • 143.0 mm (13)
  • 153.0 mm (8)
  • 158.0 mm (11)
  • 176.0 mm (5)
  • 197.0 mm (6)
  • 214.0 mm (4)
Over All Length [L] Min to Over All Length [L] Max
Application
Coating
Coating
  • TiN/AlTiN (754)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KCP15B (799)
Back-End
Back-End Diameter
Back-End Diameter
  • 4.775 mm (22)
  • 6.0 mm (239)
  • 6.351 mm (17)
  • 7.95 mm (14)
  • 8.0 mm (126)
  • 9.525 mm (14)
  • 10.0 mm (106)
  • 11.125 mm (10)
  • 12.0 mm (89)
  • 12.701 mm (9)
  • 14.0 mm (54)
  • 14.3 mm (5)
  • 15.875 mm (2)
  • 16.0 mm (50)
  • 17.45 mm (1)
  • 18.0 mm (26)
  • 20.0 mm (16)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.188 in (22)
  • 0.237 in (239)
  • 0.25 in (17)
  • 0.313 in (14)
  • 0.315 in (126)
  • 0.375 in (14)
  • 0.394 in (106)
  • 0.438 in (10)
  • 0.473 in (89)
  • 0.5 in (9)
  • 0.551 in (54)
  • 0.564 in (5)
  • 0.625 in (2)
  • 0.63 in (50)
  • 0.687 in (1)
  • 0.709 in (26)
  • 0.787 in (16)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""

KenDrill™ HPX • 5 x D • Internal Coolant • Straight Shank • Metric

(169) KenDrill™ HPX • 5 x D • Internal Coolant • Straight Shank • Metric

KenDrill™ HPX • 5 x D • Internal Coolant • Straight Shank • Inch

(64) KenDrill™ HPX • 5 x D • Internal Coolant • Straight Shank • Inch

KenDrill™ HPX • 3 x D • Internal Coolant • Straight Shank • Metric

(111) KenDrill™ HPX • 3 x D • Internal Coolant • Straight Shank • Metric

KenDrill™ HPX • 3 x D • Internal Coolant • Straight Shank • Inch

(30) KenDrill™ HPX • 3 x D • Internal Coolant • Straight Shank • Inch

KenDrill™ HPX • 8 x D • Internal Coolant • Straight Shank • Metric

(103) KenDrill™ HPX • 8 x D • Internal Coolant • Straight Shank • Metric

KenDrill™ HPX • 3 x D • Straight Shank • Metric

(170) KenDrill™ HPX • 3 x D • Straight Shank • Metric

KenDrill™ HPX • 5 x D • Straight Shank • Metric

(108) KenDrill™ HPX • 5 x D • Straight Shank • Metric

KenDrill™ HPX • 5 x D • Internal Coolant • Whistle Notch™ Shank • Metric

(45) KenDrill™ HPX • 5 x D • Internal Coolant • Whistle Notch™ Shank • Metric

Have Questions For Us?

Our skilled staff is ready to help.

Request More Information
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Thank you for your successful registration. You now have immediate access to log in and utilize the site.

You are about to leave the Solution building process.

Are you sure you want to leave?