Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read

Kennametal® Deep-Hole Drilling (Up To 10xD) For HTS Systems - HTS Systems Indexable Drilling & Hole Making Tools For Sale

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (269)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (269)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (269)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (269)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (269)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (269)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (269)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (269)
  • M Stainless Steel (264)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (264)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (264)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (264)
  • K Cast Iron (286)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (286)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (286)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (286)
  • N Non-Ferrous Materials (227)
    • N1
      Wrought Aluminum
      (227)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (227)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (227)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (227)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (227)
    • N6
      Carbon, Graphite Composites, CFRP
      (227)
    • N7
      MMC's
      (227)
  • S High-Temp Alloys (254)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (254)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (254)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (254)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (254)
  • H Hardened Materials (109)
    • H1
      Hardened Materials 44-48 HRC
      (109)
    • H2
      Hardened Materials 48-55 HRC
      (109)
    • H3
      Hardened Materials 56-60 HRC
      (109)
    • H4
      Hardened Materials >60 HRC
      (109)
Select First Choice
  • BR (21)
  • CN (69)
  • DE (69)
  • GB (53)
  • IN (29)
  • SG (52)
  • US (69)
Applications
Applications
  • Convex Drilling Convex Drilling (1)
  • Drilling Drilling (61)
  • ID Thread Turning ID Thread Turning (1)
Cutting Diameter
Cutting Diameter
  • 0.197 in (1)
  • 0.237 in (1)
  • 0.315 in (7)
  • 0.394 in (7)
  • 0.591 in (3)
  • 0.787 in (3)
  • 0.984 in (3)
  • 1.181 in (3)
  • 1.575 in (1)
  • 1.693 in (1)
  • 1.772 in (1)
  • 1.811 in (1)
  • 1.929 in (1)
  • 1.969 in (1)
  • 2.047 in (1)
  • 2.165 in (1)
  • 2.283 in (1)
  • 2.48 in (2)
  • 2.677 in (1)
  • 2.874 in (1)
  • 3.071 in (2)
  • 3.307 in (1)
  • 3.543 in (1)
  • 3.781 in (2)
  • 4.016 in (1)
  • 4.252 in (1)
  • 4.529 in (1)
  • 4.803 in (1)
  • 5.118 in (1)
  • 5.513 in (1)
  • 5.906 in (1)
  • 6.22 in (1)
  • 6.378 in (1)
  • 7.087 in (1)
  • 7.678 in (1)
  • 8.387 in (1)
  • 9.055 in (1)
  • 10.236 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 5.0 mm (1)
  • 6.0 mm (1)
  • 8.0 mm (7)
  • 10.0 mm (7)
  • 15.0 mm (3)
  • 20.0 mm (3)
  • 25.0 mm (3)
  • 30.0 mm (3)
  • 40.0 mm (1)
  • 43.0 mm (1)
  • 45.0 mm (1)
  • 46.0 mm (1)
  • 49.0 mm (1)
  • 50.0 mm (1)
  • 52.0 mm (1)
  • 55.0 mm (1)
  • 58.0 mm (1)
  • 63.0 mm (2)
  • 68.0 mm (1)
  • 73.0 mm (1)
  • 78.0 mm (2)
  • 84.0 mm (1)
  • 90.0 mm (1)
  • 96.0 mm (2)
  • 102.0 mm (1)
  • 108.0 mm (1)
  • 115.0 mm (1)
  • 122.0 mm (1)
  • 130.0 mm (1)
  • 140.0 mm (1)
  • 150.0 mm (1)
  • 158.0 mm (1)
  • 162.0 mm (1)
  • 180.0 mm (1)
  • 195.0 mm (1)
  • 213.0 mm (1)
  • 230.0 mm (1)
  • 260.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (4)
  • Interrupted (86)
  • Lightly Interrupted Cut (4)
  • Smooth Cut (4)
  • Stable (160)
  • Unstable (120)
  • Varying Depth of Cut (4)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 8.0 mm (2)
  • 9.601 mm (1)
  • 10.0 mm (2)
  • 11.3 mm (1)
  • 430.0 mm (1)
  • 460.0 mm (1)
  • 490.0 mm (1)
  • 500.0 mm (1)
  • 520.0 mm (1)
  • 550.0 mm (2)
  • 580.0 mm (1)
  • 630.0 mm (1)
  • 680.0 mm (2)
  • 750.0 mm (7)
  • 780.0 mm (3)
  • 1000.0 mm (5)
  • 1060.0 mm (3)
  • 1360.0 mm (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.315 in (2)
  • 0.378 in (1)
  • 0.394 in (2)
  • 0.445 in (1)
  • 16.93 in (1)
  • 18.11 in (1)
  • 19.291 in (1)
  • 19.685 in (1)
  • 20.472 in (1)
  • 21.654 in (2)
  • 22.835 in (1)
  • 24.803 in (1)
  • 26.773 in (2)
  • 29.529 in (7)
  • 30.709 in (3)
  • 39.37 in (5)
  • 41.732 in (3)
  • 53.543 in (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.37 in (1)
  • 0.378 in (1)
  • 0.4 in (2)
  • 0.445 in (2)
  • 0.473 in (2)
  • 0.681 in (1)
  • 0.906 in (1)
  • 1.143 in (1)
  • 1.417 in (1)
Reach Min to Reach Max
Reach
Reach
  • 9.4 mm (1)
  • 9.601 mm (1)
  • 10.15 mm (2)
  • 11.3 mm (2)
  • 12.0 mm (2)
  • 17.3 mm (1)
  • 23.0 mm (1)
  • 29.0 mm (1)
  • 36.0 mm (1)
Reach Min to Reach Max
Connection Style
Connection Style
  • HTS (33)
  • HTS Pilot Drill Shank (18)
  • HTS-C Pilot Drill Shank (4)
  • HTS-R Pilot Drill Shank (6)
Number of Flutes
Number of Flutes
  • 2 (61)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 2.0 (76)
  • 4.0 (105)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.008 in (7)
  • 0.012 in (5)
  • 0.016 in (132)
  • 0.024 in (8)
  • 0.031 in (125)
  • 0.039 in (50)
  • 0.047 in (68)
  • 0.063 in (45)
  • 0.079 in (22)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (7)
  • 0.301 mm (5)
  • 0.4 mm (132)
  • 0.601 mm (8)
  • 0.8 mm (125)
  • 1.0 mm (50)
  • 1.201 mm (68)
  • 1.6 mm (45)
  • 2.0 mm (22)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (235)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (235)
Corner Chamfer Min to Corner Chamfer Max
Application
Coating
Coating
  • TiN (16)
  • Uncoated (4)
Drilling Condition
Drilling Condition
  • Interrupted (32)
  • Stable (106)
  • Unstable (66)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • A30 (8)
  • AS3 (12)
  • CD4 (44)
  • CM4 (35)
  • CS5 (73)
  • K2885 (10)
  • K313 (10)
  • K6 (10)
  • K8735 (10)
  • KC7020 (15)
  • KC7025 (15)
  • KC7140 (107)
  • KC715M (10)
  • KC720 (76)
  • KC7210 (35)
  • KC7215 (104)
  • KC7225 (87)
  • KC725M (10)
  • KC730 (10)
  • KC7315 (77)
  • KC7325 (2)
  • KC735M (10)
  • KC7815 (87)
  • KC7820 (77)
  • KC7845 (10)
  • KC7935 (72)
  • KC8050 (10)
  • KC810 (72)
  • KC850 (10)
  • KC9110 (10)
  • KC9125 (10)
  • KC920M (10)
  • KC9225 (10)
  • KC9240 (10)
  • KC9240NEW (10)
  • KC925M (10)
  • KC9315 (10)
  • KC9320 (10)
  • KC9325 (10)
  • KC935 (10)
  • KC990 (72)
  • KCK15 (10)
  • KCK15B (10)
  • KCK20 (10)
  • KCK20B (10)
  • KCM15 (10)
  • KCM25 (10)
  • KCP10 (10)
  • KCP25 (10)
  • KCP30 (10)
  • KCP30B (10)
  • KCPK10 (112)
  • KCPK30 (10)
  • KCS10 (10)
  • KCS10B (10)
  • KCU25 (133)
  • KCU40 (134)
  • KD1425 (81)
  • KM1 (50)
  • KMF (72)
  • KU30T (10)
  • KU40D (72)
Hand Of Tool
Hand Of Tool
  • R (61)
Wiper Insert
Wiper Insert
  • N (181)
Drill Type
Drill Type
  • 81-06 (28)
  • 86-01 (33)
Front-End
Insert Shape
Insert Shape
  • B-PARALLELOGRAM 82 (10)
  • S-SQUARE 90 (225)
  • W-TRIGON 80 (28)
  • X-TRIGON 84 (44)
Gage Length
Gage Length
  • 2.394 in (3)
  • 2.972 in (2)
  • 3.051 in (1)
  • 3.346 in (3)
  • 3.426 in (3)
  • 3.543 in (3)
  • 3.551 in (1)
  • 3.622 in (2)
  • 3.697 in (1)
  • 3.701 in (4)
  • 3.781 in (2)
  • 3.938 in (2)
  • 4.13 in (1)
  • 4.331 in (2)
  • 4.409 in (2)
  • 4.484 in (1)
  • 4.5 in (3)
  • 4.921 in (2)
  • 5.315 in (1)
  • 5.496 in (1)
  • 5.5 in (2)
  • 6.299 in (3)
  • 6.453 in (1)
  • 6.644 in (2)
  • 6.891 in (1)
  • 7.144 in (1)
  • 7.875 in (2)
  • 8.051 in (1)
  • 8.268 in (4)
  • 8.346 in (2)
  • 8.661 in (1)
  • 9.222 in (1)
  • 10.551 in (1)
  • 11.144 in (2)
  • 11.222 in (1)
  • 12.144 in (1)
  • 12.205 in (2)
  • 12.283 in (2)
  • 12.362 in (3)
  • 12.441 in (1)
  • 13.051 in (1)
  • 13.13 in (1)
  • 14.173 in (1)
  • 15.551 in (1)
  • 15.722 in (1)
  • 17.645 in (2)
  • 18.052 in (1)
  • 18.11 in (2)
  • 18.189 in (2)
  • 18.268 in (1)
  • 19.222 in (1)
  • 19.645 in (1)
  • 20.079 in (1)
  • 20.236 in (1)
  • 20.315 in (1)
  • 21.13 in (1)
  • 24.094 in (2)
  • 24.174 in (1)
  • 25.552 in (1)
  • 25.722 in (1)
  • 31.13 in (1)
  • 31.222 in (1)
Gage Length
Gage Length
  • 210 mm (4)
  • 94 mm (4)
  • 160 mm (3)
  • 314 mm (3)
  • 85 mm (3)
  • 87 mm (3)
  • 90 mm (3)
  • 100 mm (2)
  • 110 mm (2)
  • 112 mm (2)
  • 125 mm (2)
  • 200 mm (2)
  • 212 mm (2)
  • 310 mm (2)
  • 312 mm (2)
  • 460 mm (2)
  • 462 mm (2)
  • 612 mm (2)
  • 92 mm (2)
  • 96 mm (2)
  • 135 mm (1)
  • 175 mm (1)
  • 220 mm (1)
  • 268 mm (1)
  • 316 mm (1)
  • 360 mm (1)
  • 395 mm (1)
  • 464 mm (1)
  • 510 mm (1)
  • 514 mm (1)
  • 516 mm (1)
  • 614 mm (1)
  • 649 mm (1)
  • 60.801 mm (3)
  • 75.5 mm (2)
  • 77.5 mm (1)
  • 90.2 mm (1)
  • 93.9 mm (1)
  • 104.9 mm (1)
  • 113.9 mm (1)
  • 114.301 mm (3)
  • 139.6 mm (1)
  • 139.701 mm (2)
  • 163.9 mm (1)
  • 168.75 mm (2)
  • 181.451 mm (1)
  • 204.5 mm (1)
  • 234.25 mm (1)
  • 283.05 mm (2)
  • 285.05 mm (1)
  • 308.451 mm (1)
  • 331.5 mm (1)
  • 333.5 mm (1)
  • 399.35 mm (1)
  • 448.151 mm (2)
  • 458.5 mm (1)
  • 488.25 mm (1)
  • 498.951 mm (1)
  • 536.7 mm (1)
  • 653.35 mm (1)
  • 790.7 mm (1)
  • 793.051 mm (1)
Point Angle
Point Angle
  • 118.0 (54)
  • 130.0 (2)
Point Angle Min to Point Angle Max
Insert Geometry
Shape
Shape
  • S-SQUARE 90 (181)
Insert IC Size
Insert IC Size
  • 5.551 mm (6)
  • 6.351 mm (27)
  • 7.75 mm (1)
  • 7.926 mm (16)
  • 7.95 mm (22)
  • 9.525 mm (42)
  • 12.701 mm (40)
  • 15.726 mm (18)
  • 15.875 mm (9)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.219 in (6)
  • 0.25 in (27)
  • 0.305 in (1)
  • 0.312 in (16)
  • 0.313 in (22)
  • 0.375 in (42)
  • 0.5 in (40)
  • 0.619 in (18)
  • 0.625 in (9)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 5.426 mm (6)
  • 6.2 mm (10)
  • 6.351 mm (17)
  • 7.75 mm (1)
  • 7.801 mm (13)
  • 7.926 mm (25)
  • 9.375 mm (18)
  • 9.525 mm (24)
  • 12.55 mm (12)
  • 12.701 mm (37)
  • 15.726 mm (18)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.214 in (6)
  • 0.244 in (10)
  • 0.25 in (17)
  • 0.305 in (1)
  • 0.307 in (13)
  • 0.312 in (25)
  • 0.369 in (18)
  • 0.375 in (24)
  • 0.494 in (12)
  • 0.5 in (37)
  • 0.619 in (18)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • 20 (33)
  • 21 (30)
  • 22 (4)
  • 31 (12)
  • FP (27)
  • HP (30)
  • MD (33)
  • MDT (3)
Cutting Tool Material
Cutting Tool Material
  • D P (50)
  • H W (235)
Tolerance Class
Tolerance Class
  • G (49)
  • H (12)
  • P (54)
Back-End
Connection Type
Connection Type
  • CYLINDRICAL (28)
  • HTS SHANK (33)
System Size
System Size
  • BT50 (4)
  • CV50 (7)
  • DV50 (2)
  • HSK100A (2)
Back-End Diameter
Back-End Diameter
  • 5.0 mm (1)
  • 6.0 mm (1)
  • 8.0 mm (7)
  • 10.0 mm (7)
  • 13.0 mm (7)
  • 15.0 mm (3)
  • 16.0 mm (3)
  • 20.0 mm (3)
  • 22.0 mm (4)
  • 25.0 mm (3)
  • 27.0 mm (4)
  • 30.0 mm (3)
  • 32.0 mm (3)
  • 40.0 mm (3)
  • 50.0 mm (4)
  • 60.0 mm (3)
  • 80.0 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.197 in (1)
  • 0.237 in (1)
  • 0.315 in (7)
  • 0.394 in (7)
  • 0.512 in (7)
  • 0.591 in (3)
  • 0.63 in (3)
  • 0.787 in (3)
  • 0.866 in (4)
  • 0.984 in (3)
  • 1.063 in (4)
  • 1.181 in (3)
  • 1.26 in (3)
  • 1.575 in (3)
  • 1.969 in (4)
  • 2.362 in (3)
  • 3.15 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Indexable Drills

Drill Fix™ DFSP™ • HP Inserts
(30 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D] Insert IC Size [D] Insert IC Size [D1] Insert Hole Size [D1] Insert Hole Size [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius [GAA] Insert Rake Angle [Clearance Angle Major Clearance Angle Major Second
1848593 SPGX060304RHP SPGX060304RHP KC7140   6.3500 .2500 2.6500 .1040 3.1800 .1252 0.4000 .0156 10.000 7.000 11.000
    List price:
    $19,40 /each.
    Your price::
    Qty
    1848597 SPGX070304RHP SPGX070304RHP KC7140   7.9400 .3125 2.8500 .1120 3.1800 .1252 0.4000 .0156 10.000 7.000 11.000
      List price:
      $19,64 /each.
      Your price::
      Qty
      4040135 SPGX070308HP SPGX070308HP KCU25   7.9400 .3125 2.8500 .1120 3.1800 .1252 0.8000 .0312 10.000 7.000 11.000
        List price:
        $21,27 /each.
        Your price::
        Qty
        1848601 SPPX09T308RHP SPPX09T308RHP KC7140   9.5250 .3750 3.6000 .1417 3.9700 .1563 0.8000 .0312 10.000 7.000 11.000
          List price:
          $21,96 /each.
          Your price::
          Qty
          1848605 SPPX120408RHP SPPX120408RHP KC7140   12.7000 .5000 4.6000 .1811 4.7630 .1875 0.8000 .0312 10.000 7.000 11.000
            List price:
            $23,20 /each.
            Your price::
            Qty
            3774906 SPPX15T508RHP SPPX15T508RHP KC7140   15.7320 .6250 5.5000 .2170 5.9500 .2340 0.8000 .0312 10.000 7.000 11.000
              List price:
              $23,75 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Indexable Drills

              Drill Fix™ DFSP™ • FP Inserts
              (27 Products)
              View Products