Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

Drill Fix • DFR

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (231)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (228)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (228)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (231)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (231)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (228)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (228)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (228)
  • M Stainless Steel (222)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (222)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (222)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (222)
  • K Cast Iron (225)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (225)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (225)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (225)
  • N Non-Ferrous Materials (217)
    • N1
      Wrought Aluminum
      (214)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (214)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (214)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (214)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (214)
    • N6
      Carbon, Graphite Composites, CFRP
      (208)
    • N7
      MMC's
      (210)
  • S High-Temp Alloys (222)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (222)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (222)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (222)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (222)
Select First Choice
  • BR (9)
  • CN (70)
  • DE (70)
  • GB (32)
  • IN (3)
  • SG (21)
  • US (59)
Applications
Applications
  • Convex Drilling Convex Drilling (171)
  • Drilling Drilling (204)
  • ID Thread Turning ID Thread Turning (3)
  • Inclined Entry Drilling Inclined Entry Drilling (171)
  • Inclined Exit Drilling Inclined Exit Drilling (171)
  • X-Offset Drilling X-Offset Drilling (171)
Cutting Diameter
Cutting Diameter
  • 0.492 in (7)
  • 0.5 in (11)
  • 0.512 in (7)
  • 0.531 in (9)
  • 0.551 in (8)
  • 0.564 in (4)
  • 0.572 in (6)
  • 0.591 in (7)
  • 0.595 in (4)
  • 0.61 in (6)
  • 0.625 in (6)
  • 0.63 in (7)
  • 0.65 in (6)
  • 0.656 in (4)
  • 0.669 in (7)
  • 0.689 in (5)
  • 0.69 in (4)
  • 0.704 in (3)
  • 0.709 in (5)
  • 0.728 in (4)
  • 0.734 in (4)
  • 0.748 in (5)
  • 0.75 in (5)
  • 0.768 in (4)
  • 0.781 in (4)
  • 0.787 in (5)
  • 0.807 in (4)
  • 0.814 in (5)
  • 0.828 in (6)
  • 0.845 in (4)
  • 0.866 in (5)
  • 0.875 in (6)
  • 0.906 in (8)
  • 0.939 in (4)
  • 0.946 in (5)
  • 0.969 in (3)
  • 0.984 in (2)
  • 1.0 in (5)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 12.5 mm (7)
  • 12.701 mm (11)
  • 13.0 mm (7)
  • 13.476 mm (3)
  • 13.5 mm (6)
  • 14.0 mm (8)
  • 14.3 mm (4)
  • 14.5 mm (6)
  • 15.0 mm (7)
  • 15.101 mm (4)
  • 15.5 mm (6)
  • 15.875 mm (6)
  • 16.0 mm (7)
  • 16.5 mm (6)
  • 16.651 mm (4)
  • 17.0 mm (7)
  • 17.475 mm (5)
  • 17.5 mm (4)
  • 17.85 mm (3)
  • 18.0 mm (5)
  • 18.5 mm (4)
  • 18.651 mm (4)
  • 19.0 mm (5)
  • 19.05 mm (5)
  • 19.5 mm (4)
  • 19.826 mm (4)
  • 20.0 mm (5)
  • 20.5 mm (4)
  • 20.651 mm (5)
  • 21.0 mm (6)
  • 21.451 mm (4)
  • 22.0 mm (5)
  • 22.225 mm (6)
  • 23.0 mm (8)
  • 23.826 mm (4)
  • 24.0 mm (5)
  • 24.625 mm (3)
  • 25.0 mm (2)
  • 25.401 mm (5)
Cutting Diameter Min to Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Interrupted (18)
  • Stable (28)
  • Unstable (27)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 25.0 mm (3)
  • 25.401 mm (2)
  • 26.0 mm (2)
  • 27.0 mm (2)
  • 28.0 mm (2)
  • 28.6 mm (1)
  • 29.0 mm (2)
  • 30.0 mm (2)
  • 31.0 mm (2)
  • 31.75 mm (1)
  • 32.0 mm (2)
  • 33.0 mm (2)
  • 34.0 mm (2)
  • 34.95 mm (1)
  • 35.0 mm (1)
  • 36.0 mm (1)
  • 37.0 mm (1)
  • 37.5 mm (3)
  • 38.0 mm (1)
  • 38.1 mm (5)
  • 39.0 mm (4)
  • 40.0 mm (1)
  • 40.45 mm (2)
  • 40.5 mm (2)
  • 41.0 mm (1)
  • 41.301 mm (1)
  • 42.0 mm (5)
  • 42.901 mm (3)
  • 43.5 mm (2)
  • 44.0 mm (1)
  • 44.45 mm (1)
  • 45.0 mm (3)
  • 45.276 mm (3)
  • 46.0 mm (1)
  • 46.5 mm (2)
  • 47.625 mm (3)
  • 47.651 mm (1)
  • 48.0 mm (4)
  • 49.5 mm (2)
  • 49.975 mm (3)
  • 50.0 mm (2)
  • 50.801 mm (4)
  • 51.0 mm (3)
  • 52.0 mm (2)
  • 52.426 mm (3)
  • 52.5 mm (2)
  • 53.575 mm (2)
  • 53.95 mm (1)
  • 54.0 mm (5)
  • 55.5 mm (2)
  • 55.926 mm (3)
  • 56.0 mm (2)
  • 57.0 mm (3)
  • 57.151 mm (3)
  • 57.2 mm (1)
  • 58.0 mm (2)
  • 58.5 mm (2)
  • 59.5 mm (3)
  • 60.0 mm (5)
  • 60.35 mm (1)
  • 61.5 mm (2)
  • 61.95 mm (3)
  • 62.0 mm (2)
  • 63.0 mm (4)
  • 63.5 mm (2)
  • 64.0 mm (2)
  • 64.325 mm (3)
  • 66.0 mm (5)
  • 66.65 mm (1)
  • 66.675 mm (4)
  • 68.0 mm (2)
  • 69.0 mm (3)
  • 69.025 mm (2)
  • 69.9 mm (1)
  • 70.0 mm (1)
  • 71.425 mm (1)
  • 71.476 mm (2)
  • 72.0 mm (4)
  • 73.851 mm (2)
  • 74.0 mm (1)
  • 74.575 mm (1)
  • 74.976 mm (1)
  • 76.0 mm (1)
  • 76.2 mm (3)
  • 78.0 mm (1)
  • 79.351 mm (1)
  • 80.0 mm (1)
  • 82.0 mm (1)
  • 82.601 mm (1)
  • 84.0 mm (1)
  • 85.75 mm (1)
  • 88.0 mm (1)
  • 88.9 mm (1)
  • 92.0 mm (1)
  • 92.051 mm (1)
  • 95.301 mm (1)
  • 96.0 mm (1)
  • 97.426 mm (1)
  • 98.45 mm (1)
  • 101.601 mm (2)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.984 in (3)
  • 1.0 in (2)
  • 1.024 in (2)
  • 1.063 in (2)
  • 1.102 in (2)
  • 1.127 in (1)
  • 1.143 in (2)
  • 1.181 in (2)
  • 1.22 in (2)
  • 1.25 in (1)
  • 1.26 in (2)
  • 1.299 in (2)
  • 1.339 in (2)
  • 1.377 in (1)
  • 1.379 in (1)
  • 1.417 in (1)
  • 1.457 in (1)
  • 1.476 in (3)
  • 1.496 in (1)
  • 1.5 in (5)
  • 1.536 in (4)
  • 1.575 in (1)
  • 1.593 in (2)
  • 1.594 in (2)
  • 1.614 in (1)
  • 1.627 in (1)
  • 1.655 in (5)
  • 1.689 in (3)
  • 1.713 in (2)
  • 1.732 in (1)
  • 1.75 in (1)
  • 1.772 in (3)
  • 1.784 in (3)
  • 1.811 in (1)
  • 1.831 in (2)
  • 1.875 in (3)
  • 1.877 in (1)
  • 1.891 in (4)
  • 1.949 in (2)
  • 1.968 in (3)
  • 1.969 in (2)
  • 2.0 in (4)
  • 2.008 in (3)
  • 2.047 in (2)
  • 2.064 in (3)
  • 2.067 in (2)
  • 2.109 in (2)
  • 2.124 in (1)
  • 2.126 in (5)
  • 2.185 in (2)
  • 2.202 in (3)
  • 2.205 in (2)
  • 2.244 in (3)
  • 2.25 in (3)
  • 2.253 in (1)
  • 2.283 in (2)
  • 2.303 in (2)
  • 2.343 in (3)
  • 2.362 in (5)
  • 2.376 in (1)
  • 2.422 in (2)
  • 2.439 in (3)
  • 2.441 in (2)
  • 2.48 in (4)
  • 2.5 in (2)
  • 2.52 in (2)
  • 2.532 in (3)
  • 2.598 in (5)
  • 2.624 in (1)
  • 2.625 in (4)
  • 2.677 in (2)
  • 2.717 in (3)
  • 2.718 in (2)
  • 2.753 in (1)
  • 2.757 in (1)
  • 2.813 in (1)
  • 2.814 in (2)
  • 2.835 in (4)
  • 2.908 in (2)
  • 2.914 in (1)
  • 2.936 in (1)
  • 2.952 in (1)
  • 2.992 in (1)
  • 3.0 in (3)
  • 3.071 in (1)
  • 3.124 in (1)
  • 3.15 in (1)
  • 3.228 in (1)
  • 3.253 in (1)
  • 3.307 in (1)
  • 3.376 in (1)
  • 3.465 in (1)
  • 3.5 in (1)
  • 3.622 in (1)
  • 3.624 in (1)
  • 3.753 in (1)
  • 3.781 in (1)
  • 3.837 in (1)
  • 3.876 in (1)
  • 4.0 in (2)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 1.024 in (1)
  • 1.102 in (1)
  • 1.143 in (3)
  • 1.181 in (4)
  • 1.22 in (2)
  • 1.26 in (1)
  • 1.299 in (1)
  • 1.339 in (1)
  • 1.379 in (2)
  • 1.417 in (3)
  • 1.457 in (3)
  • 1.496 in (2)
  • 1.614 in (3)
  • 1.655 in (3)
  • 1.693 in (1)
  • 1.732 in (4)
  • 1.772 in (6)
  • 1.811 in (5)
  • 1.85 in (3)
  • 1.891 in (2)
  • 1.929 in (3)
  • 1.969 in (5)
  • 2.008 in (5)
  • 2.047 in (2)
  • 2.087 in (4)
  • 2.126 in (8)
  • 2.165 in (3)
  • 2.205 in (5)
  • 2.244 in (3)
  • 2.283 in (3)
  • 2.323 in (4)
  • 2.362 in (5)
  • 2.402 in (5)
  • 2.441 in (1)
  • 2.48 in (5)
  • 2.52 in (5)
  • 2.559 in (6)
  • 2.598 in (2)
  • 2.638 in (5)
  • 2.677 in (5)
  • 2.757 in (7)
  • 2.795 in (3)
  • 2.835 in (2)
  • 2.914 in (3)
  • 2.953 in (3)
  • 2.992 in (2)
  • 3.031 in (4)
  • 3.071 in (4)
  • 3.11 in (3)
  • 3.15 in (2)
  • 3.189 in (4)
  • 3.228 in (5)
  • 3.269 in (2)
  • 3.307 in (2)
  • 3.346 in (2)
  • 3.386 in (1)
  • 3.426 in (4)
  • 3.504 in (1)
  • 3.543 in (1)
  • 3.583 in (2)
  • 3.701 in (1)
  • 3.74 in (1)
  • 3.781 in (1)
  • 3.858 in (1)
  • 3.938 in (1)
  • 3.976 in (1)
  • 4.094 in (2)
  • 4.173 in (1)
  • 4.213 in (2)
  • 4.252 in (1)
Reach Min to Reach Max
Reach
Reach
  • 26.0 mm (1)
  • 28.0 mm (1)
  • 29.0 mm (3)
  • 30.0 mm (4)
  • 31.0 mm (2)
  • 32.0 mm (1)
  • 33.0 mm (1)
  • 34.0 mm (1)
  • 35.0 mm (2)
  • 36.0 mm (3)
  • 37.0 mm (3)
  • 38.0 mm (2)
  • 41.0 mm (3)
  • 42.0 mm (3)
  • 43.0 mm (1)
  • 44.0 mm (4)
  • 45.0 mm (6)
  • 46.0 mm (5)
  • 47.0 mm (3)
  • 48.0 mm (2)
  • 49.0 mm (3)
  • 50.0 mm (5)
  • 51.0 mm (5)
  • 52.0 mm (2)
  • 53.0 mm (4)
  • 54.0 mm (8)
  • 55.0 mm (3)
  • 56.0 mm (5)
  • 57.0 mm (3)
  • 58.0 mm (3)
  • 59.0 mm (4)
  • 60.0 mm (5)
  • 61.0 mm (5)
  • 62.0 mm (1)
  • 63.0 mm (5)
  • 64.0 mm (5)
  • 65.0 mm (6)
  • 66.0 mm (2)
  • 67.0 mm (5)
  • 68.0 mm (5)
  • 70.0 mm (7)
  • 71.0 mm (3)
  • 72.0 mm (2)
  • 74.0 mm (3)
  • 75.0 mm (3)
  • 76.0 mm (2)
  • 77.0 mm (4)
  • 78.0 mm (4)
  • 79.0 mm (3)
  • 80.0 mm (2)
  • 81.0 mm (4)
  • 82.0 mm (5)
  • 83.0 mm (2)
  • 84.0 mm (2)
  • 85.0 mm (2)
  • 86.0 mm (1)
  • 87.0 mm (4)
  • 89.0 mm (1)
  • 90.0 mm (1)
  • 91.0 mm (2)
  • 94.0 mm (1)
  • 95.0 mm (1)
  • 96.0 mm (1)
  • 98.0 mm (1)
  • 100.0 mm (1)
  • 101.0 mm (1)
  • 104.0 mm (2)
  • 106.0 mm (1)
  • 107.0 mm (2)
  • 108.0 mm (1)
Reach Min to Reach Max
Connection Style
Connection Style
  • Cylindrical Shank 1 Flat (33)
  • Cylindrical Shank 2 Flats (60)
  • KM (34)
  • Whistle Drive 2 (39)
  • Whistle Notch 2 CylindricalEnd (38)
Number of Flutes
Number of Flutes
  • 2 (204)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (57)
  • 2.0 (231)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.016 in (28)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (28)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (28)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (28)
Corner Chamfer Min to Corner Chamfer Max
Application
Drilling Condition
Drilling Condition
  • Interrupted (222)
  • Stable (232)
  • Unstable (231)