Drill Fix DFR • KM-TS

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (24)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (24)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (24)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (24)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (24)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (24)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (24)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (24)
  • M Stainless Steel (24)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (24)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (24)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (24)
  • K Cast Iron (24)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (24)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (24)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (24)
  • N Non-Ferrous Materials (24)
    • N1
      Wrought Aluminum (24)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (24)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (24)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (24)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (24)
    • N6
      Carbon, Graphite Composites, CFRP (24)
    • N7
      MMC's (24)
  • S High-Temp Alloys (24)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (24)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (24)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (24)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (24)
Applications
Applications
  • Convex Drilling Convex Drilling (24)
  • Drilling Drilling (24)
  • Inclined Entry Drilling Inclined Entry Drilling (24)
  • Inclined Exit Drilling Inclined Exit Drilling (24)
  • X-Offset Drilling X-Offset Drilling (24)
Cutting Diameter
Cutting Diameter
  • 0.492 in (1)
  • 0.5 in (1)
  • 0.512 in (1)
  • 0.551 in (1)
  • 0.591 in (1)
  • 0.595 in (1)
  • 0.625 in (1)
  • 0.63 in (1)
  • 0.656 in (1)
  • 0.669 in (1)
  • 0.689 in (1)
  • 0.709 in (1)
  • 0.748 in (1)
  • 0.75 in (1)
  • 0.787 in (1)
  • 0.828 in (2)
  • 0.866 in (1)
  • 0.875 in (2)
  • 0.906 in (1)
  • 0.939 in (1)
  • 0.946 in (1)
  • 0.969 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 12.5 mm (1)
  • 12.701 mm (1)
  • 13.0 mm (1)
  • 14.0 mm (1)
  • 15.0 mm (1)
  • 15.101 mm (1)
  • 15.875 mm (1)
  • 16.0 mm (1)
  • 16.651 mm (1)
  • 17.0 mm (1)
  • 17.475 mm (1)
  • 18.0 mm (1)
  • 19.0 mm (1)
  • 19.05 mm (1)
  • 20.0 mm (1)
  • 21.0 mm (2)
  • 22.0 mm (1)
  • 22.225 mm (2)
  • 23.0 mm (1)
  • 23.826 mm (1)
  • 24.0 mm (1)
  • 24.625 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 37.5 mm (1)
  • 38.1 mm (1)
  • 39.0 mm (1)
  • 42.0 mm (1)
  • 45.0 mm (1)
  • 45.276 mm (1)
  • 47.625 mm (1)
  • 48.0 mm (1)
  • 49.975 mm (1)
  • 51.0 mm (1)
  • 52.426 mm (1)
  • 54.0 mm (1)
  • 57.0 mm (1)
  • 57.151 mm (1)
  • 60.0 mm (1)
  • 63.0 mm (2)
  • 66.0 mm (1)
  • 66.675 mm (2)
  • 69.0 mm (1)
  • 71.476 mm (1)
  • 72.0 mm (1)
  • 73.851 mm (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 1.476 in (1)
  • 1.5 in (1)
  • 1.536 in (1)
  • 1.655 in (1)
  • 1.772 in (1)
  • 1.784 in (1)
  • 1.875 in (1)
  • 1.891 in (1)
  • 1.968 in (1)
  • 2.008 in (1)
  • 2.064 in (1)
  • 2.126 in (1)
  • 2.244 in (1)
  • 2.25 in (1)
  • 2.362 in (1)
  • 2.48 in (2)
  • 2.598 in (1)
  • 2.625 in (2)
  • 2.717 in (1)
  • 2.814 in (1)
  • 2.835 in (1)
  • 2.908 in (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 1.772 in (1)
  • 1.811 in (1)
  • 1.85 in (1)
  • 1.969 in (1)
  • 2.008 in (1)
  • 2.087 in (1)
  • 2.205 in (1)
  • 2.283 in (1)
  • 2.362 in (1)
  • 2.402 in (1)
  • 2.48 in (1)
  • 2.52 in (1)
  • 2.638 in (2)
  • 2.757 in (1)
  • 2.795 in (1)
  • 2.953 in (1)
  • 3.071 in (1)
  • 3.15 in (1)
  • 3.228 in (2)
  • 3.346 in (1)
  • 3.426 in (1)
  • 3.543 in (1)
Reach Min to Reach Max
Reach
Reach
  • 45.0 mm (1)
  • 46.0 mm (1)
  • 47.0 mm (1)
  • 50.0 mm (1)
  • 51.0 mm (1)
  • 53.0 mm (1)
  • 56.0 mm (1)
  • 58.0 mm (1)
  • 60.0 mm (1)
  • 61.0 mm (1)
  • 63.0 mm (1)
  • 64.0 mm (1)
  • 67.0 mm (2)
  • 70.0 mm (1)
  • 71.0 mm (1)
  • 75.0 mm (1)
  • 78.0 mm (1)
  • 80.0 mm (1)
  • 82.0 mm (2)
  • 85.0 mm (1)
  • 87.0 mm (1)
  • 90.0 mm (1)
Reach Min to Reach Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (8)
  • 2.0 (24)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 3.622 in (1)
  • 3.656 in (1)
  • 3.714 in (1)
  • 3.833 in (1)
  • 3.95 in (1)
  • 4.069 in (1)
  • 4.122 in (1)
  • 4.228 in (1)
  • 4.25 in (1)
  • 4.273 in (1)
  • 4.346 in (1)
  • 4.375 in (1)
  • 4.5 in (1)
  • 4.505 in (1)
  • 4.622 in (1)
  • 4.783 in (1)
  • 4.807 in (1)
  • 4.902 in (1)
  • 5.005 in (1)
  • 5.059 in (2)
  • 5.178 in (1)
  • 5.255 in (1)
  • 5.38 in (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 92.0 mm (1)
  • 92.825 mm (1)
  • 94.325 mm (1)
  • 97.325 mm (1)
  • 100.325 mm (1)
  • 103.325 mm (1)
  • 104.7 mm (1)
  • 107.4 mm (1)
  • 107.95 mm (1)
  • 108.525 mm (1)
  • 110.4 mm (1)
  • 111.125 mm (1)
  • 114.301 mm (1)
  • 114.4 mm (1)
  • 117.4 mm (1)
  • 121.5 mm (1)
  • 122.101 mm (1)
  • 124.5 mm (1)
  • 127.101 mm (1)
  • 128.5 mm (2)
  • 131.5 mm (1)
  • 133.451 mm (1)
  • 136.625 mm (1)
Over All Length [L] Min to Over All Length [L] Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC7020 (24)
  • KC7025 (24)
  • KC7140 (24)
  • KC7225 (24)
  • KC7815 (24)
  • KC7820 (24)
  • KCMS35 (16)
  • KCPK10 (24)
  • KCU25 (24)
  • KCU40 (24)
  • KD1425 (8)
Back-End
System Size
System Size
  • KM32TS (1)
  • KM40TS (21)
  • KM50TS (2)
Back-End Diameter
Back-End Diameter
  • 32.0 mm (1)
  • 40.0 mm (21)
  • 50.0 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 1.26 in (1)
  • 1.575 in (21)
  • 1.969 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?