Product Suggestions

Product Family suggestions

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu
Need Help? Contact an Expert site stretcher close

Drill Fix • DFSP

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (790)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (784)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (790)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (790)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (790)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (790)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (778)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (778)
  • M Stainless Steel (770)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (770)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (770)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (758)
  • K Cast Iron (769)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (769)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (769)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (769)
  • N Non-Ferrous Materials (751)
    • N1
      Wrought Aluminum
      (751)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (751)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (751)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (745)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (745)
    • N6
      Carbon, Graphite Composites, CFRP
      (745)
    • N7
      MMC's
      (743)
  • S High-Temp Alloys (746)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (740)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (740)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (746)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (746)
  • H Hardened Materials (608)
    • H1
      Hardened Materials 44-48 HRC
      (608)
    • H2
      Hardened Materials 48-55 HRC
      (608)
    • H3
      Hardened Materials 56-60 HRC
      (608)
    • H4
      Hardened Materials >60 HRC
      (608)
Select First Choice
  • BR (45)
  • CN (177)
  • DE (177)
  • GB (105)
  • IN (37)
  • SG (57)
  • US (182)
Applications
Applications
  • Convex Drilling Convex Drilling (95)
  • Drilling Drilling (612)
  • ID Thread Turning ID Thread Turning (6)
  • Inclined Entry Drilling Inclined Entry Drilling (95)
  • Inclined Exit Drilling Inclined Exit Drilling (95)
  • X-Offset Drilling X-Offset Drilling (66)
Cutting Diameter
Cutting Diameter
  • 0.551 in (8)
  • 0.564 in (2)
  • 0.572 in (8)
  • 0.591 in (8)
  • 0.595 in (2)
  • 0.61 in (8)
  • 0.625 in (2)
  • 0.63 in (8)
  • 0.65 in (8)
  • 0.656 in (2)
  • 0.669 in (8)
  • 0.689 in (2)
  • 0.69 in (8)
  • 0.704 in (2)
  • 0.709 in (8)
  • 0.728 in (8)
  • 0.734 in (2)
  • 0.748 in (8)
  • 0.75 in (3)
  • 0.768 in (8)
  • 0.781 in (3)
  • 0.787 in (8)
  • 0.807 in (4)
  • 0.814 in (4)
  • 0.824 in (4)
  • 0.828 in (8)
  • 0.845 in (4)
  • 0.846 in (4)
  • 0.866 in (8)
  • 0.875 in (4)
  • 0.886 in (4)
  • 0.906 in (12)
  • 0.925 in (4)
  • 0.939 in (4)
  • 0.942 in (4)
  • 0.946 in (8)
  • 0.965 in (4)
  • 0.969 in (4)
  • 0.984 in (19)
  • 1.0 in (19)
  • 1.004 in (4)
  • 1.024 in (9)
  • 1.031 in (4)
  • 1.039 in (4)
  • 1.043 in (8)
  • 1.063 in (19)
  • 1.094 in (4)
  • 1.102 in (10)
  • 1.125 in (11)
  • 1.143 in (15)
  • 1.156 in (4)
  • 1.158 in (4)
  • 1.181 in (10)
  • 1.188 in (4)
  • 1.219 in (4)
  • 1.22 in (15)
  • 1.25 in (13)
  • 1.26 in (9)
  • 1.281 in (1)
  • 1.299 in (13)
  • 1.313 in (11)
  • 1.339 in (9)
  • 1.375 in (13)
  • 1.379 in (13)
  • 1.407 in (1)
  • 1.417 in (9)
  • 1.438 in (9)
  • 1.457 in (9)
  • 1.469 in (2)
  • 1.476 in (4)
  • 1.496 in (13)
  • 1.5 in (13)
  • 1.536 in (8)
  • 1.563 in (10)
  • 1.575 in (8)
  • 1.614 in (7)
  • 1.625 in (8)
  • 1.655 in (4)
  • 1.657 in (4)
  • 1.688 in (5)
  • 1.693 in (4)
  • 1.732 in (7)
  • 1.75 in (6)
  • 1.772 in (4)
  • 1.811 in (4)
  • 1.813 in (4)
  • 1.85 in (5)
  • 1.875 in (6)
  • 1.891 in (4)
  • 1.929 in (4)
  • 1.938 in (4)
  • 1.969 in (4)
  • 1.988 in (2)
  • 2.0 in (8)
  • 2.008 in (4)
  • 2.047 in (4)
  • 2.087 in (4)
  • 2.125 in (8)
  • 2.126 in (4)
  • 2.165 in (4)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 14.0 mm (8)
  • 14.3 mm (2)
  • 14.5 mm (8)
  • 15.0 mm (8)
  • 15.101 mm (2)
  • 15.5 mm (8)
  • 15.875 mm (2)
  • 16.0 mm (8)
  • 16.5 mm (8)
  • 16.651 mm (2)
  • 17.0 mm (8)
  • 17.475 mm (2)
  • 17.5 mm (8)
  • 17.85 mm (2)
  • 18.0 mm (8)
  • 18.5 mm (8)
  • 18.651 mm (2)
  • 19.0 mm (8)
  • 19.05 mm (3)
  • 19.5 mm (8)
  • 19.826 mm (3)
  • 20.0 mm (8)
  • 20.5 mm (4)
  • 20.651 mm (4)
  • 20.901 mm (4)
  • 21.0 mm (8)
  • 21.451 mm (4)
  • 21.5 mm (4)
  • 22.0 mm (8)
  • 22.225 mm (4)
  • 22.5 mm (4)
  • 23.0 mm (12)
  • 23.5 mm (4)
  • 23.826 mm (4)
  • 23.901 mm (4)
  • 24.0 mm (8)
  • 24.5 mm (4)
  • 24.625 mm (4)
  • 25.0 mm (19)
  • 25.401 mm (19)
  • 25.5 mm (4)
  • 26.0 mm (9)
  • 26.175 mm (4)
  • 26.401 mm (4)
  • 26.5 mm (8)
  • 27.0 mm (19)
  • 27.8 mm (4)
  • 28.0 mm (10)
  • 28.576 mm (11)
  • 29.0 mm (15)
  • 29.35 mm (4)
  • 29.401 mm (4)
  • 30.0 mm (10)
  • 30.175 mm (4)
  • 30.975 mm (4)
  • 31.0 mm (15)
  • 31.75 mm (13)
  • 32.0 mm (9)
  • 32.525 mm (1)
  • 33.0 mm (13)
  • 33.35 mm (11)
  • 34.0 mm (9)
  • 34.926 mm (13)
  • 35.0 mm (13)
  • 35.7 mm (1)
  • 36.0 mm (9)
  • 36.525 mm (9)
  • 37.0 mm (9)
  • 37.325 mm (2)
  • 37.5 mm (4)
  • 38.0 mm (13)
  • 38.1 mm (13)
  • 39.0 mm (8)
  • 39.7 mm (10)
  • 40.0 mm (8)
  • 41.0 mm (7)
  • 41.276 mm (8)
  • 42.0 mm (4)
  • 42.051 mm (4)
  • 42.875 mm (5)
  • 43.0 mm (4)
  • 44.0 mm (7)
  • 44.45 mm (6)
  • 45.0 mm (4)
  • 46.0 mm (4)
  • 46.051 mm (4)
  • 47.0 mm (5)
  • 47.625 mm (6)
  • 48.0 mm (4)
  • 49.0 mm (4)
  • 49.225 mm (4)
  • 50.0 mm (4)
  • 50.5 mm (2)
  • 50.801 mm (8)
  • 51.0 mm (4)
  • 52.0 mm (4)
  • 53.0 mm (4)
  • 53.975 mm (8)
  • 54.0 mm (4)
  • 55.0 mm (4)
Cutting Diameter Min to Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Interrupted (28)
  • Stable (55)
  • Unstable (46)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 28.0 mm (2)
  • 28.6 mm (1)
  • 29.0 mm (2)
  • 30.0 mm (2)
  • 30.175 mm (1)
  • 31.0 mm (2)
  • 31.75 mm (1)
  • 32.0 mm (2)
  • 33.0 mm (2)
  • 33.325 mm (1)
  • 34.0 mm (2)
  • 34.95 mm (1)
  • 35.0 mm (2)
  • 35.7 mm (1)
  • 36.0 mm (2)
  • 37.0 mm (2)
  • 37.275 mm (1)
  • 38.0 mm (2)
  • 38.1 mm (1)
  • 39.0 mm (2)
  • 39.676 mm (1)
  • 40.0 mm (2)
  • 41.0 mm (1)
  • 41.301 mm (1)
  • 41.801 mm (1)
  • 42.0 mm (4)
  • 42.875 mm (1)
  • 42.901 mm (1)
  • 43.0 mm (1)
  • 43.5 mm (2)
  • 44.0 mm (2)
  • 44.45 mm (1)
  • 45.0 mm (3)
  • 45.276 mm (1)
  • 46.0 mm (2)
  • 46.026 mm (1)
  • 46.5 mm (2)
  • 47.0 mm (1)
  • 47.625 mm (1)
  • 47.651 mm (1)
  • 47.801 mm (1)
  • 48.0 mm (4)
  • 49.0 mm (1)
  • 49.225 mm (1)
  • 49.5 mm (2)
  • 49.975 mm (2)
  • 50.0 mm (2)
  • 50.801 mm (3)
  • 51.0 mm (3)
  • 52.0 mm (2)
  • 52.375 mm (1)
  • 52.426 mm (1)
  • 52.5 mm (2)
  • 52.801 mm (1)
  • 53.0 mm (2)
  • 53.575 mm (1)
  • 53.975 mm (1)
  • 54.0 mm (4)
  • 55.5 mm (2)
  • 55.575 mm (1)
  • 55.926 mm (1)
  • 56.0 mm (4)
  • 57.0 mm (2)
  • 57.151 mm (2)
  • 58.0 mm (4)
  • 58.5 mm (2)
  • 58.725 mm (1)
  • 58.801 mm (1)
  • 59.5 mm (1)
  • 60.0 mm (6)
  • 60.35 mm (1)
  • 61.5 mm (1)
  • 61.926 mm (1)
  • 61.95 mm (1)
  • 62.0 mm (4)
  • 62.7 mm (1)
  • 63.0 mm (2)
  • 63.5 mm (1)
  • 64.0 mm (5)
  • 64.325 mm (1)
  • 64.5 mm (1)
  • 66.0 mm (6)
  • 66.675 mm (1)
  • 66.7 mm (2)
  • 67.5 mm (1)
  • 68.0 mm (4)
  • 69.0 mm (2)
  • 69.025 mm (1)
  • 69.851 mm (2)
  • 70.0 mm (6)
  • 70.5 mm (1)
  • 71.476 mm (1)
  • 71.7 mm (1)
  • 72.0 mm (6)
  • 72.5 mm (2)
  • 73.05 mm (1)
  • 73.5 mm (1)
  • 73.851 mm (1)
  • 74.0 mm (4)
  • 74.625 mm (1)
  • 74.976 mm (1)
  • 75.0 mm (12)
  • 76.0 mm (4)
  • 76.2 mm (13)
  • 76.5 mm (1)
  • 77.5 mm (2)
  • 78.0 mm (7)
  • 78.551 mm (1)
  • 79.2 mm (1)
  • 79.351 mm (1)
  • 79.4 mm (2)
  • 79.5 mm (2)
  • 80.0 mm (6)
  • 81.0 mm (10)
  • 82.0 mm (2)
  • 82.5 mm (2)
  • 82.551 mm (2)
  • 82.601 mm (1)
  • 83.375 mm (1)
  • 83.601 mm (1)
  • 84.0 mm (6)
  • 84.125 mm (1)
  • 85.0 mm (2)
  • 85.726 mm (8)
  • 85.75 mm (2)
  • 86.0 mm (2)
  • 87.0 mm (9)
  • 87.5 mm (2)
  • 88.0 mm (3)
  • 88.075 mm (1)
  • 88.2 mm (1)
  • 88.9 mm (2)
  • 90.0 mm (8)
  • 90.525 mm (1)
  • 92.0 mm (3)
  • 92.051 mm (1)
  • 92.101 mm (1)
  • 92.5 mm (2)
  • 92.9 mm (1)
  • 93.0 mm (9)
  • 94.0 mm (2)
  • 95.0 mm (2)
  • 95.25 mm (9)
  • 95.301 mm (1)
  • 95.601 mm (1)
  • 96.0 mm (6)
  • 97.5 mm (2)
  • 97.601 mm (1)
  • 98.0 mm (2)
  • 98.45 mm (2)
  • 99.0 mm (7)
  • 99.976 mm (1)
  • 100.0 mm (6)
  • 100.051 mm (7)
  • 101.601 mm (5)
  • 102.0 mm (5)
  • 102.5 mm (1)
  • 103.25 mm (1)
  • 104.0 mm (3)
  • 104.5 mm (1)
  • 104.75 mm (1)
  • 104.775 mm (7)
  • 105.0 mm (9)
  • 105.601 mm (1)
  • 106.0 mm (3)
  • 107.2 mm (1)
  • 107.5 mm (1)
  • 107.95 mm (3)
  • 108.0 mm (6)
  • 109.575 mm (6)
  • 110.0 mm (3)
  • 111.0 mm (3)
  • 111.125 mm (1)
  • 111.15 mm (1)
  • 111.95 mm (1)
  • 112.0 mm (2)
  • 112.5 mm (2)
  • 114.0 mm (7)
  • 114.301 mm (8)
  • 115.0 mm (2)
  • 115.051 mm (1)
  • 116.0 mm (2)
  • 117.0 mm (2)
  • 117.45 mm (1)
  • 117.5 mm (1)
  • 117.601 mm (1)
  • 119.101 mm (6)
  • 119.125 mm (1)
  • 119.5 mm (1)
  • 120.0 mm (6)
  • 120.7 mm (1)
  • 122.5 mm (1)
  • 123.0 mm (4)
  • 123.075 mm (1)
  • 123.7 mm (1)
  • 123.825 mm (3)
  • 123.851 mm (1)
  • 124.0 mm (2)
  • 124.976 mm (1)
  • 125.0 mm (2)
  • 126.0 mm (1)
  • 126.176 mm (1)
  • 127.0 mm (5)
  • 127.5 mm (1)
  • 128.0 mm (2)
  • 128.625 mm (4)
  • 129.0 mm (1)
  • 130.0 mm (2)
  • 130.925 mm (1)
  • 132.0 mm (7)
  • 132.5 mm (2)
  • 133.35 mm (3)
  • 133.4 mm (1)
  • 135.0 mm (4)
  • 136.0 mm (2)
  • 138.0 mm (1)
  • 138.15 mm (1)
  • 138.951 mm (1)
  • 139.701 mm (2)
  • 140.0 mm (4)
  • 141.0 mm (2)
  • 142.85 mm (1)
  • 142.875 mm (4)
  • 144.0 mm (3)
  • 145.0 mm (2)
  • 146.1 mm (1)
  • 146.8 mm (1)
  • 147.0 mm (2)
  • 147.675 mm (1)
  • 148.0 mm (2)
  • 150.0 mm (4)
  • 150.475 mm (1)
  • 150.875 mm (1)
  • 151.5 mm (1)
  • 152.0 mm (2)
  • 152.4 mm (4)
  • 153.0 mm (1)
  • 155.0 mm (2)
  • 156.0 mm (3)
  • 158.75 mm (2)
  • 158.8 mm (1)
  • 159.0 mm (1)
  • 160.0 mm (4)
  • 161.925 mm (2)
  • 162.0 mm (1)
  • 164.0 mm (1)
  • 165.0 mm (3)
  • 165.101 mm (1)
  • 166.75 mm (1)
  • 168.0 mm (1)
  • 168.25 mm (1)
  • 170.0 mm (2)
  • 172.0 mm (1)
  • 174.625 mm (2)
  • 175.0 mm (2)
  • 176.0 mm (1)
  • 177.8 mm (1)
  • 180.0 mm (3)
  • 182.625 mm (1)
  • 184.0 mm (1)
  • 184.201 mm (1)
  • 185.0 mm (2)
  • 187.5 mm (1)
  • 188.0 mm (1)
  • 190.0 mm (2)
  • 190.5 mm (3)
  • 192.0 mm (1)
  • 195.0 mm (2)
  • 196.0 mm (1)
  • 196.9 mm (1)
  • 198.5 mm (1)
  • 200.0 mm (3)
  • 203.201 mm (2)
  • 204.0 mm (1)
  • 205.0 mm (1)
  • 206.375 mm (1)
  • 208.0 mm (1)
  • 210.0 mm (1)
  • 210.3 mm (1)
  • 212.0 mm (1)
  • 215.0 mm (1)
  • 215.9 mm (2)
  • 216.0 mm (1)
  • 220.0 mm (2)
  • 222.25 mm (1)
  • 225.0 mm (1)
  • 230.0 mm (1)
  • 230.25 mm (1)
  • 235.0 mm (1)
  • 238.125 mm (1)
  • 240.0 mm (1)
  • 245.0 mm (1)
  • 246.125 mm (1)
  • 250.0 mm (1)
  • 254.0 mm (2)
  • 255.0 mm (1)
  • 260.0 mm (1)
  • 265.0 mm (1)
  • 269.875 mm (2)
  • 270.0 mm (1)
  • 275.0 mm (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max