Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

Drill Fix • DFT

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (380)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (380)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (380)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (380)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (380)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (380)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (374)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (374)
  • M Stainless Steel (374)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (374)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (374)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (374)
  • K Cast Iron (374)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (374)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (374)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (374)
  • N Non-Ferrous Materials (371)
    • N1
      Wrought Aluminum
      (371)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (371)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (371)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (365)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (371)
    • N6
      Carbon, Graphite Composites, CFRP
      (365)
    • N7
      MMC's
      (351)
  • S High-Temp Alloys (367)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (367)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (367)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (367)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (367)
  • H Hardened Materials (267)
    • H1
      Hardened Materials 44-48 HRC
      (267)
    • H2
      Hardened Materials 48-55 HRC
      (267)
    • H3
      Hardened Materials 56-60 HRC
      (267)
    • H4
      Hardened Materials >60 HRC
      (267)
Select First Choice
  • BR (17)
  • CN (28)
  • DE (28)
  • GB (27)
  • IN (30)
  • SG (24)
  • US (125)
Applications
Applications
  • Convex Drilling Convex Drilling (256)
  • Drilling Drilling (258)
  • ID Thread Turning ID Thread Turning (6)
  • Inclined Entry Drilling Inclined Entry Drilling (256)
  • Inclined Exit Drilling Inclined Exit Drilling (256)
  • X-Offset Drilling X-Offset Drilling (258)
Cutting Diameter
Cutting Diameter
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.656 in (3)
  • 0.669 in (2)
  • 0.687 in (2)
  • 0.689 in (1)
  • 0.704 in (3)
  • 0.709 in (2)
  • 0.734 in (3)
  • 0.748 in (3)
  • 0.75 in (5)
  • 0.781 in (2)
  • 0.787 in (3)
  • 0.814 in (3)
  • 0.828 in (3)
  • 0.845 in (2)
  • 0.866 in (4)
  • 0.875 in (5)
  • 0.906 in (6)
  • 0.937 in (2)
  • 0.939 in (1)
  • 0.946 in (2)
  • 0.969 in (3)
  • 0.984 in (7)
  • 1.0 in (7)
  • 1.024 in (4)
  • 1.031 in (1)
  • 1.032 in (1)
  • 1.063 in (7)
  • 1.094 in (2)
  • 1.102 in (4)
  • 1.125 in (4)
  • 1.143 in (5)
  • 1.156 in (2)
  • 1.181 in (4)
  • 1.187 in (1)
  • 1.188 in (1)
  • 1.219 in (3)
  • 1.22 in (5)
  • 1.25 in (5)
  • 1.26 in (4)
  • 1.281 in (1)
  • 1.282 in (1)
  • 1.299 in (3)
  • 1.313 in (3)
  • 1.339 in (3)
  • 1.375 in (4)
  • 1.379 in (3)
  • 1.407 in (3)
  • 1.417 in (3)
  • 1.437 in (2)
  • 1.438 in (2)
  • 1.457 in (3)
  • 1.469 in (3)
  • 1.496 in (3)
  • 1.5 in (5)
  • 1.532 in (4)
  • 1.536 in (3)
  • 1.563 in (4)
  • 1.575 in (3)
  • 1.614 in (3)
  • 1.625 in (4)
  • 1.655 in (3)
  • 1.687 in (2)
  • 1.688 in (2)
  • 1.693 in (3)
  • 1.732 in (3)
  • 1.75 in (2)
  • 1.772 in (3)
  • 1.811 in (3)
  • 1.813 in (2)
  • 1.85 in (3)
  • 1.875 in (2)
  • 1.891 in (3)
  • 1.929 in (2)
  • 1.937 in (1)
  • 1.938 in (1)
  • 1.969 in (2)
  • 2.0 in (4)
  • 2.008 in (2)
  • 2.047 in (2)
  • 2.087 in (2)
  • 2.125 in (4)
  • 2.126 in (2)
  • 2.165 in (1)
  • 2.205 in (1)
  • 2.244 in (1)
  • 2.25 in (1)
  • 2.283 in (1)
  • 2.323 in (1)
  • 2.362 in (1)
  • 2.375 in (1)
  • 2.402 in (1)
  • 2.441 in (1)
  • 2.48 in (1)
  • 2.5 in (1)
  • 2.52 in (1)
  • 2.559 in (1)
  • 2.598 in (1)
  • 2.638 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 16.651 mm (3)
  • 17.0 mm (2)
  • 17.45 mm (2)
  • 17.475 mm (1)
  • 17.85 mm (3)
  • 18.0 mm (2)
  • 18.651 mm (3)
  • 19.0 mm (3)
  • 19.05 mm (5)
  • 19.826 mm (1)
  • 19.85 mm (1)
  • 20.0 mm (3)
  • 20.651 mm (3)
  • 21.0 mm (3)
  • 21.451 mm (2)
  • 22.0 mm (4)
  • 22.225 mm (5)
  • 23.0 mm (6)
  • 23.8 mm (2)
  • 23.826 mm (1)
  • 24.0 mm (2)
  • 24.625 mm (3)
  • 25.0 mm (7)
  • 25.401 mm (7)
  • 26.0 mm (4)
  • 26.175 mm (1)
  • 26.201 mm (1)
  • 27.0 mm (7)
  • 27.8 mm (2)
  • 28.0 mm (4)
  • 28.576 mm (4)
  • 29.0 mm (5)
  • 29.35 mm (2)
  • 30.0 mm (4)
  • 30.151 mm (1)
  • 30.175 mm (1)
  • 30.951 mm (2)
  • 30.975 mm (1)
  • 31.0 mm (5)
  • 31.75 mm (5)
  • 32.0 mm (4)
  • 32.525 mm (1)
  • 32.551 mm (1)
  • 33.0 mm (3)
  • 33.35 mm (3)
  • 34.0 mm (3)
  • 34.926 mm (4)
  • 35.0 mm (3)
  • 35.7 mm (3)
  • 36.0 mm (3)
  • 36.5 mm (2)
  • 36.525 mm (2)
  • 37.0 mm (3)
  • 37.301 mm (2)
  • 37.325 mm (1)
  • 38.0 mm (3)
  • 38.1 mm (5)
  • 38.875 mm (4)
  • 39.0 mm (3)
  • 39.7 mm (4)
  • 40.0 mm (3)
  • 41.0 mm (3)
  • 41.276 mm (4)
  • 42.0 mm (3)
  • 42.85 mm (2)
  • 42.875 mm (2)
  • 43.0 mm (3)
  • 44.0 mm (3)
  • 44.45 mm (2)
  • 45.0 mm (3)
  • 46.0 mm (3)
  • 46.051 mm (2)
  • 47.0 mm (3)
  • 47.625 mm (2)
  • 48.0 mm (3)
  • 49.0 mm (2)
  • 49.2 mm (1)
  • 49.225 mm (1)
  • 50.0 mm (2)
  • 50.801 mm (4)
  • 51.0 mm (2)
  • 52.0 mm (2)
  • 53.0 mm (2)
  • 53.975 mm (4)
  • 54.0 mm (2)
  • 55.0 mm (1)
  • 56.0 mm (1)
  • 57.0 mm (1)
  • 57.151 mm (1)
  • 58.0 mm (1)
  • 59.0 mm (1)
  • 60.0 mm (1)
  • 60.325 mm (1)
  • 61.0 mm (1)
  • 62.0 mm (1)
  • 63.0 mm (1)
  • 63.5 mm (1)
  • 64.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Interrupted (69)
  • Stable (88)
  • Unstable (81)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 38.401 mm (6)
  • 40.651 mm (2)
  • 41.651 mm (2)
  • 44.45 mm (2)
  • 44.7 mm (2)
  • 46.6 mm (2)
  • 47.625 mm (2)
  • 48.5 mm (3)
  • 48.7 mm (3)
  • 48.901 mm (6)
  • 49.0 mm (3)
  • 49.776 mm (1)
  • 51.551 mm (2)
  • 53.6 mm (1)
  • 55.575 mm (3)
  • 57.526 mm (2)
  • 58.901 mm (2)
  • 59.1 mm (4)
  • 59.7 mm (2)
  • 60.95 mm (2)
  • 63.5 mm (6)
  • 66.05 mm (1)
  • 66.101 mm (2)
  • 66.3 mm (4)
  • 66.675 mm (1)
  • 67.3 mm (1)
  • 68.575 mm (1)
  • 69.851 mm (1)
  • 71.425 mm (1)
  • 72.4 mm (1)
  • 73.4 mm (1)
  • 74.625 mm (1)
  • 76.2 mm (5)
  • 76.4 mm (6)
  • 76.5 mm (4)
  • 76.601 mm (2)
  • 76.801 mm (2)
  • 77.476 mm (2)
  • 79.375 mm (1)
  • 79.5 mm (2)
  • 81.0 mm (1)
  • 81.275 mm (1)
  • 82.551 mm (1)
  • 83.825 mm (2)
  • 85.726 mm (2)
  • 87.0 mm (1)
  • 87.625 mm (2)
  • 88.0 mm (1)
  • 88.9 mm (4)
  • 91.45 mm (2)
  • 92.075 mm (1)
  • 93.0 mm (1)
  • 93.976 mm (2)
  • 95.25 mm (4)
  • 96.7 mm (2)
  • 96.801 mm (2)
  • 96.9 mm (6)
  • 97.0 mm (2)
  • 97.801 mm (2)
  • 98.426 mm (1)
  • 99.051 mm (2)
  • 100.0 mm (2)
  • 100.025 mm (1)
  • 101.601 mm (3)
  • 104.0 mm (2)
  • 104.15 mm (2)
  • 104.775 mm (1)
  • 107.95 mm (3)
  • 108.0 mm (2)
  • 111.0 mm (2)
  • 111.125 mm (1)
  • 111.25 mm (1)
  • 111.5 mm (2)
  • 112.0 mm (4)
  • 112.101 mm (4)
  • 112.2 mm (2)
  • 114.301 mm (3)
  • 116.0 mm (2)
  • 117.2 mm (4)
  • 117.4 mm (2)
  • 117.5 mm (2)
  • 117.601 mm (2)
  • 117.7 mm (2)
  • 120.0 mm (2)
  • 124.0 mm (2)
  • 125.0 mm (14)
  • 127.0 mm (4)
  • 128.0 mm (2)
  • 135.9 mm (2)
  • 139.701 mm (2)
  • 140.0 mm (15)
  • 146.05 mm (2)
  • 152.4 mm (2)
  • 155.576 mm (2)
  • 158.75 mm (3)
  • 165.101 mm (2)
  • 171.451 mm (2)
  • 190.5 mm (2)
  • 203.201 mm (2)
  • 215.9 mm (2)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 1.512 in (6)
  • 1.6 in (2)
  • 1.641 in (2)
  • 1.75 in (2)
  • 1.76 in (2)
  • 1.835 in (2)
  • 1.875 in (2)
  • 1.909 in (3)
  • 1.917 in (3)
  • 1.925 in (6)
  • 1.929 in (3)
  • 1.96 in (1)
  • 2.031 in (2)
  • 2.11 in (1)
  • 2.188 in (3)
  • 2.265 in (2)
  • 2.319 in (2)
  • 2.327 in (4)
  • 2.35 in (2)
  • 2.4 in (2)
  • 2.5 in (6)
  • 2.6 in (1)
  • 2.602 in (2)
  • 2.61 in (4)
  • 2.625 in (1)
  • 2.65 in (1)
  • 2.7 in (1)
  • 2.75 in (1)
  • 2.813 in (1)
  • 2.85 in (1)
  • 2.89 in (1)
  • 2.938 in (1)
  • 3.0 in (5)
  • 3.008 in (6)
  • 3.012 in (4)
  • 3.016 in (2)
  • 3.024 in (2)
  • 3.051 in (2)
  • 3.125 in (1)
  • 3.13 in (2)
  • 3.189 in (1)
  • 3.2 in (1)
  • 3.25 in (1)
  • 3.301 in (2)
  • 3.375 in (2)
  • 3.426 in (1)
  • 3.45 in (2)
  • 3.465 in (1)
  • 3.5 in (4)
  • 3.6 in (2)
  • 3.625 in (1)
  • 3.661 in (1)
  • 3.7 in (2)
  • 3.75 in (4)
  • 3.807 in (2)
  • 3.811 in (2)
  • 3.815 in (6)
  • 3.819 in (2)
  • 3.85 in (2)
  • 3.875 in (1)
  • 3.9 in (2)
  • 3.938 in (3)
  • 4.0 in (3)
  • 4.094 in (2)
  • 4.1 in (2)
  • 4.125 in (1)
  • 4.25 in (3)
  • 4.252 in (2)
  • 4.37 in (2)
  • 4.375 in (1)
  • 4.38 in (1)
  • 4.39 in (2)
  • 4.409 in (4)
  • 4.413 in (4)
  • 4.417 in (2)
  • 4.5 in (3)
  • 4.55 in (1)
  • 4.567 in (2)
  • 4.614 in (4)
  • 4.622 in (2)
  • 4.626 in (2)
  • 4.63 in (2)
  • 4.634 in (2)
  • 4.724 in (2)
  • 4.882 in (2)
  • 4.921 in (14)
  • 5.0 in (4)
  • 5.039 in (2)
  • 5.351 in (2)
  • 5.5 in (2)
  • 5.513 in (15)
  • 5.75 in (2)
  • 6.0 in (2)
  • 6.125 in (2)
  • 6.25 in (3)
  • 6.5 in (2)
  • 6.75 in (2)
  • 7.5 in (2)
  • 8.0 in (2)
  • 8.5 in (2)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.787 in (1)
  • 0.828 in (1)
  • 1.85 in (5)
  • 1.891 in (1)
  • 2.126 in (8)
  • 2.244 in (15)
  • 2.362 in (3)
  • 2.48 in (3)
  • 2.717 in (5)
  • 2.835 in (6)
  • 2.874 in (4)
  • 2.992 in (2)
  • 3.031 in (2)
  • 3.11 in (4)
  • 3.228 in (8)
  • 3.386 in (3)
  • 3.465 in (2)
  • 3.622 in (1)
  • 3.661 in (2)
  • 3.74 in (3)
  • 3.781 in (1)
  • 3.819 in (14)
  • 3.858 in (3)
  • 3.976 in (2)
  • 4.016 in (1)
  • 4.055 in (1)
  • 4.134 in (2)
  • 4.173 in (1)
  • 4.213 in (5)
  • 4.291 in (2)
  • 4.331 in (1)
  • 4.37 in (2)
  • 4.488 in (2)
  • 4.529 in (2)
  • 4.606 in (19)
  • 4.724 in (2)
  • 4.764 in (4)
  • 4.882 in (1)
  • 4.921 in (4)
  • 5.0 in (2)
  • 5.039 in (3)
  • 5.118 in (2)
  • 5.157 in (1)
  • 5.197 in (12)
  • 5.236 in (2)
  • 5.276 in (3)
  • 5.354 in (1)
  • 5.433 in (2)
  • 5.472 in (2)
  • 5.591 in (2)
  • 5.63 in (1)
  • 5.748 in (2)
  • 5.787 in (14)
  • 5.867 in (1)
  • 5.906 in (3)
  • 5.945 in (1)
  • 6.024 in (1)
  • 6.102 in (2)
  • 6.142 in (1)
  • 6.26 in (1)
  • 6.378 in (13)
  • 6.417 in (3)
  • 6.457 in (2)
  • 6.496 in (2)
  • 6.614 in (1)
  • 6.732 in (1)
  • 6.772 in (2)
  • 6.851 in (1)
  • 6.891 in (1)
  • 7.008 in (4)
  • 7.087 in (1)
  • 7.244 in (2)
  • 7.283 in (2)
  • 7.362 in (11)
  • 7.402 in