Suggestions

Product Suggestions

Product Categories

Resources

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read

Indexable Inserts

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (570)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (567)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (567)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (570)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (570)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (567)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (540)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (528)
  • M Stainless Steel (554)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (554)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (554)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (528)
  • K Cast Iron (450)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (450)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (450)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (450)
  • N Non-Ferrous Materials (341)
    • N1
      Wrought Aluminum
      (321)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (335)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (305)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (311)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (324)
    • N6
      Carbon, Graphite Composites, CFRP
      (287)
    • N7
      MMC's
      (273)
  • S High-Temp Alloys (502)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (496)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (496)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (502)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (502)
  • H Hardened Materials (64)
    • H1
      Hardened Materials 44-48 HRC
      (64)
    • H2
      Hardened Materials 48-55 HRC
      (59)
    • H3
      Hardened Materials 56-60 HRC
      (59)
    • H4
      Hardened Materials >60 HRC
      (59)
Select First Choice
  • BR (55)
  • CN (231)
  • DE (231)
  • GB (162)
  • IN (124)
  • SG (160)
  • US (234)
Applications
Applications
  • ID Thread Turning ID Thread Turning (36)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (51)
  • Interrupted (201)
  • Lightly Interrupted Cut (74)
  • Smooth Cut (186)
  • Stable (309)
  • Unstable (250)
  • Varying Depth of Cut (82)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (12)
  • 1.0 (28)
  • 2.0 (246)
  • 3.0 (155)
  • 4.0 (174)
  • 8.0 (65)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Corner configuration
Corner Radius
Corner Radius
  • 0.0015 in (2)
  • 0.004 in (9)
  • 0.008 in (58)
  • 0.015 in (6)
  • 0.0156 in (184)
  • 0.016 in (27)
  • 0.0236 in (6)
  • 0.031 in (33)
  • 0.0312 in (3)
  • 0.0313 in (197)
  • 0.0315 in (3)
  • 0.033 in (5)
  • 0.0335 in (4)
  • 0.039 in (9)
  • 0.0394 in (6)
  • 0.0397 in (6)
  • 0.0469 in (47)
  • 0.047 in (6)
  • 0.0472 in (6)
  • 0.0476 in (5)
  • 0.0625 in (9)
  • 0.063 in (2)
  • 0.0631 in (2)
  • 0.0787 in (3)
  • 0.079 in (6)
  • 0.631 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.038 mm (2)
  • 0.1 mm (4)
  • 0.102 mm (5)
  • 0.2 mm (58)
  • 0.397 mm (11)
  • 0.4 mm (206)
  • 0.6 mm (6)
  • 0.8 mm (236)
  • 0.85 mm (9)
  • 1.0 mm (21)
  • 1.2 mm (64)
  • 1.6 mm (15)
  • 2.0 mm (9)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (51)
  • Interrupted (201)
  • Lightly Interrupted Cut (74)
  • Smooth Cut (186)
  • Stable (309)
  • Unstable (250)
  • Varying Depth of Cut (82)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CS5 (11)
  • K313 (16)
  • K68 (2)
  • KC5010 (75)
  • KC5025 (32)
  • KC5410 (14)
  • KC7015 (6)
  • KC7140 (66)
  • KC720 (8)
  • KC7215 (38)
  • KC7225 (1)
  • KC730 (12)
  • KC7315 (14)
  • KCK05 (3)
  • KCK05B (1)
  • KCK15B (4)
  • KCP05 (4)
  • KCP10 (6)
  • KCP10B (6)
  • KCP25 (6)
  • KCP25B (5)
  • KCPK10 (40)
  • KCU10 (14)
  • KCU25 (112)
  • KCU40 (119)
  • KD1425 (6)
  • KM1 (13)
  • KMF (11)
  • KT315 (33)
  • KT325 (2)
Wiper Insert
Wiper Insert
  • N (646)
  • Y (34)
Countersunk Angle
Countersunk Angle
  • 30.0 (4)
  • 41.0 (4)
  • 45.0 (19)
  • 50.0 (1)
Countersunk Angle Min to Countersunk Angle Max
Front-End
Cutting Width
Cutting Width
  • 0.2283 in (1)
  • 0.2402 in (1)
  • 0.3858 in (2)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 5.8 mm (1)
  • 6.1 mm (1)
  • 9.8 mm (2)
Cutting Width Min to Cutting Width Max
Insert Shape
Insert Shape
  • B-PARALLELOGRAM 82 (32)
  • C-DIAMOND/RHOMBIC 80 (243)
  • COUNTERBORE/COUNTERSINK MISC (34)
  • D-DIAMOND/RHOMBIC 90 (30)
  • S-SQUARE 90 (181)
  • T-TRIANGLE 60 (12)
  • X-TRIGON 84 (148)
Insert Geometry
Shape
Shape
  • B-PARALLELOGRAM 82 (32)
  • C-DIAMOND/RHOMBIC 80 (243)
  • COUNTERBORE/COUNTERSINK MISC (34)
  • D-DIAMOND/RHOMBIC 90 (30)
  • S-SQUARE 90 (181)
  • T-TRIANGLE 60 (12)
  • X-TRIGON 84 (148)
Insert IC Size
Insert IC Size
  • 5.0 mm (7)
  • 5.42 mm (2)
  • 5.56 mm (13)
  • 6.0 mm (44)
  • 6.35 mm (82)
  • 7.8 mm (2)
  • 7.937 mm (17)
  • 7.94 mm (22)
  • 8.0 mm (38)
  • 9.52 mm (3)
  • 9.525 mm (107)
  • 10.0 mm (31)
  • 12.0 mm (25)
  • 12.7 mm (151)
  • 15.0 mm (25)
  • 15.73 mm (2)
  • 15.732 mm (18)
  • 15.875 mm (13)
  • 17.59 mm (2)
  • 17.6 mm (7)
  • 19.05 mm (4)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.1969 in (6)
  • 0.197 in (1)
  • 0.213 in (2)
  • 0.2188 in (13)
  • 0.236 in (5)
  • 0.2362 in (39)
  • 0.25 in (82)
  • 0.307 in (2)
  • 0.3125 in (39)
  • 0.315 in (38)
  • 0.375 in (110)
  • 0.394 in (29)
  • 0.395 in (2)
  • 0.472 in (25)
  • 0.5 in (151)
  • 0.5906 in (10)
  • 0.591 in (15)
  • 0.619 in (2)
  • 0.625 in (31)
  • 0.6925 in (2)
  • 0.6929 in (3)
  • 0.693 in (4)
  • 0.75 in (4)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 3.31 mm (7)
  • 3.97 mm (26)
  • 5.19 mm (1)
  • 5.29 mm (24)
  • 5.417 mm (6)
  • 5.42 mm (2)
  • 5.646 mm (4)
  • 6.207 mm (10)
  • 6.21 mm (2)
  • 6.35 mm (14)
  • 6.448 mm (33)
  • 6.45 mm (7)
  • 6.459 mm (6)
  • 6.472 mm (7)
  • 6.52 mm (1)
  • 6.62 mm (30)
  • 7.797 mm (13)
  • 7.8 mm (2)
  • 7.84 mm (1)
  • 7.937 mm (23)
  • 7.94 mm (24)
  • 9.38 mm (2)
  • 9.382 mm (18)
  • 9.525 mm (21)
  • 9.63 mm (3)
  • 9.672 mm (66)
  • 9.83 mm (1)
  • 9.92 mm (24)
  • 11.0 mm (3)
  • 11.53 mm (1)
  • 11.63 mm (4)
  • 11.64 mm (4)
  • 12.557 mm (12)
  • 12.56 mm (2)
  • 12.7 mm (34)
  • 12.896 mm (110)
  • 12.9 mm (2)
  • 13.75 mm (3)
  • 15.73 mm (2)
  • 15.732 mm (18)
  • 16.12 mm (4)
  • 16.5 mm (3)
  • 19.344 mm (4)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.13 in (1)
  • 0.1302 in (6)
  • 0.156 in (26)
  • 0.205 in (1)
  • 0.208 in (24)
  • 0.213 in (8)
  • 0.2223 in (4)
  • 0.244 in (12)
  • 0.25 in (14)
  • 0.2539 in (38)
  • 0.254 in (2)
  • 0.2543 in (6)
  • 0.2548 in (7)
  • 0.257 in (1)
  • 0.26 in (30)
  • 0.307 in (15)
  • 0.309 in (1)
  • 0.3125 in (23)
  • 0.313 in (24)
  • 0.369 in (2)
  • 0.3694 in (18)
  • 0.375 in (21)
  • 0.3791 in (3)
  • 0.3808 in (59)
  • 0.381 in (7)
  • 0.387 in (1)
  • 0.391 in (24)
  • 0.4331 in (3)
  • 0.454 in (1)
  • 0.458 in (4)
  • 0.4582 in (4)
  • 0.494 in (2)
  • 0.4944 in (12)
  • 0.5 in (34)
  • 0.5077 in (110)
  • 0.5079 in (2)
  • 0.5413 in (3)
  • 0.619 in (20)
  • 0.6346 in (4)
  • 0.65 in (3)
  • 0.7616 in (4)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • 11 (5)
  • 20 (33)
  • 21 (34)
  • 22 (4)
  • DS (34)
  • FF (3)
  • FN (29)
  • FP (31)
  • FW (16)
  • GD (49)
  • HD (4)
  • HP (144)
  • HPF (5)
  • LD (13)
  • LF (71)
  • LP (12)
  • MD (79)
  • MP (7)
  • MW (18)
  • RP (9)
  • UF (4)
Cutting Tool Material
Cutting Tool Material
  • D P (6)
  • H T (34)
  • H W (640)
Tolerance Class
Tolerance Class
  • G (152)
  • H (12)
  • M (142)
  • P (62)
No filters matching ""

Support

Chat With an Expert 
Available Now
Mon-Fri 8am - 6pm ET

Global Support

Shop

Shop Kennametal Merchandise

Find Us on Ariba

Return Policy

Careers

Work for Kennametal

✉ Stay In Touch

Join our Mailing List

⤓ NOVO App

Find Replacements for Obsolete Tools

Download Now

Language

© 2022 Terms & Conditions of Use | Conditions of Sale | Data Privacy Policy

Kennametal Inc. 525 William Penn Place Suite 3300, Pittsburgh, PA 15219

product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.
You are about to create a duplicate . Do you want to proceed?
You are about to delete Do you want to proceed?
What would you like to rename your to?
Please enter a valid name
Please enter a name for the duplicate
Please enter a valid name
You are about to add to your My Solutions page. Do you want to proceed?
Please enter a valid name
Send a copy of

Please enter a valid Email
Please enter a valid name

The following CAD files are available

Please select a file to download

Can’t find the file type you’re looking for?
Request Drawings »

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service.
item(s) successfully added to the cart
View Cart