successfully added to cart
View Cart

Notifications

Mark all as read

Modular Drills

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (2760)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2758)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2758)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2758)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2758)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (2562)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2555)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (2526)
  • M Stainless Steel (2127)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2127)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2127)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1850)
  • K Cast Iron (2645)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (2645)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (2645)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (2645)
  • N Non-Ferrous Materials (1595)
    • N1
      Wrought Aluminum
      (1594)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1594)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1594)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1574)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1351)
    • N6
      Carbon, Graphite Composites, CFRP
      (1342)
    • N7
      MMC's
      (1135)
  • S High-Temp Alloys (1403)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1249)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1249)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1249)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1403)
  • H Hardened Materials (220)
    • H1
      Hardened Materials 44-48 HRC
      (220)
    • H2
      Hardened Materials 48-55 HRC
      (110)
    • H3
      Hardened Materials 56-60 HRC
      (110)
    • H4
      Hardened Materials >60 HRC
      (110)
  • C CFRP Materials (162)
    • C1
      CFRP, CFRP / CFRP
      (63)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous
      (157)
    • C3
      CFRP / Titanium CFRP / High Temp
      (157)
    • C4
      CFRP / Stainless Steel
      (157)
Select First Choice
  • BR (142)
  • CN (630)
  • DE (679)
  • GB (426)
  • IN (244)
  • SG (313)
  • US (715)
Applications
Applications
  • Chain Drilling Chain Drilling (6)
  • Convex Drilling Convex Drilling (6)
  • Corner Drilling 45° Corner Drilling 45° (6)
  • Countersinking Countersinking (42)
  • Cross Hole Drilling Cross Hole Drilling (6)
  • Drilling Drilling (1412)
  • Flat Bottom Drilling Flat Bottom Drilling (6)
  • Half Cylindrical Drilling Half Cylindrical Drilling (6)
  • Inclined Entry Drilling Inclined Entry Drilling (820)
  • Inclined Exit Drilling Inclined Exit Drilling (820)
  • Stacked Plates Drilling Stacked Plates Drilling (1210)
  • X-Offset Drilling X-Offset Drilling (6)
Cutting Diameter
Cutting Diameter
  • 0.315 in (32)
  • 0.374 in (33)
  • 0.375 in (36)
  • 0.3937 in (34)
  • 0.4016 in (33)
  • 0.4055 in (32)
  • 0.4063 in (32)
  • 0.4134 in (32)
  • 0.4331 in (33)
  • 0.4375 in (36)
  • 0.4921 in (61)
  • 0.4961 in (51)
  • 0.5 in (63)
  • 0.5039 in (55)
  • 0.5118 in (71)
  • 0.5197 in (58)
  • 0.5315 in (56)
  • 0.5354 in (45)
  • 0.5394 in (43)
  • 0.5433 in (48)
  • 0.5469 in (43)
  • 0.5512 in (64)
  • 0.5551 in (54)
  • 0.5591 in (50)
  • 0.5625 in (33)
  • 0.563 in (51)
  • 0.5669 in (42)
  • 0.5709 in (54)
  • 0.5748 in (45)
  • 0.5827 in (46)
  • 0.5906 in (69)
  • 0.6024 in (51)
  • 0.6094 in (46)
  • 0.6102 in (62)
  • 0.6142 in (44)
  • 0.6181 in (43)
  • 0.622 in (45)
  • 0.625 in (44)
  • 0.6299 in (64)
  • 0.6339 in (55)
  • 0.634 in (43)
  • 0.6358 in (39)
  • 0.6378 in (57)
  • 0.6406 in (55)
  • 0.6496 in (63)
  • 0.6535 in (50)
  • 0.6563 in (48)
  • 0.6693 in (66)
  • 0.6875 in (52)
  • 0.689 in (64)
  • 0.6929 in (48)
  • 0.6969 in (49)
  • 0.7008 in (48)
  • 0.7031 in (46)
  • 0.7047 in (44)
  • 0.7087 in (52)
  • 0.7205 in (35)
  • 0.7283 in (53)
  • 0.7323 in (40)
  • 0.7402 in (36)
  • 0.7441 in (34)
  • 0.748 in (74)
  • 0.75 in (67)
  • 0.7559 in (58)
  • 0.757 in (57)
  • 0.759 in (59)
  • 0.7677 in (74)
  • 0.7756 in (46)
  • 0.7874 in (46)
  • 0.7913 in (34)
  • 0.7969 in (37)
  • 0.8071 in (55)
  • 0.8125 in (44)
  • 0.815 in (38)
  • 0.8268 in (51)
  • 0.8307 in (35)
  • 0.8465 in (43)
  • 0.8661 in (43)
  • 0.8701 in (41)
  • 0.875 in (44)
  • 0.8835 in (35)
  • 0.8858 in (53)
  • 0.9055 in (43)
  • 0.9252 in (48)
  • 0.9375 in (34)
  • 0.9449 in (41)
  • 0.9646 in (37)
  • 0.9843 in (66)
  • 0.987 in (45)
  • 0.9941 in (39)
  • 0.9961 in (39)
  • 1.0 in (53)
  • 1.0039 in (53)
  • 1.0055 in (38)
  • 1.0079 in (34)
  • 1.0098 in (34)
  • 1.011 in (39)
  • 1.016 in (38)
  • 1.0236 in (38)
  • 1.4173 in (33)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 8.0 mm (33)
  • 8.5 mm (31)
  • 9.0 mm (31)
  • 9.5 mm (33)
  • 9.525 mm (36)
  • 10.0 mm (34)
  • 10.2 mm (33)
  • 10.3 mm (32)
  • 10.32 mm (32)
  • 10.5 mm (32)
  • 10.8 mm (32)
  • 11.0 mm (33)
  • 11.113 mm (33)
  • 11.5 mm (32)
  • 12.5 mm (61)
  • 12.6 mm (51)
  • 12.7 mm (63)
  • 12.8 mm (55)
  • 13.0 mm (71)
  • 13.096 mm (32)
  • 13.2 mm (58)
  • 13.5 mm (61)
  • 13.6 mm (45)
  • 13.7 mm (43)
  • 13.8 mm (48)
  • 14.0 mm (64)
  • 14.1 mm (54)
  • 14.2 mm (50)
  • 14.288 mm (33)
  • 14.4 mm (42)
  • 14.5 mm (54)
  • 14.6 mm (45)
  • 14.8 mm (46)
  • 15.0 mm (69)
  • 15.3 mm (51)
  • 15.5 mm (62)
  • 15.6 mm (44)
  • 15.7 mm (43)
  • 15.8 mm (45)
  • 15.875 mm (40)
  • 16.0 mm (64)
  • 16.1 mm (55)
  • 16.15 mm (39)
  • 16.2 mm (57)
  • 16.5 mm (63)
  • 16.6 mm (50)
  • 16.67 mm (52)
  • 17.0 mm (66)
  • 17.5 mm (64)
  • 17.6 mm (48)
  • 17.7 mm (49)
  • 17.8 mm (48)
  • 17.9 mm (44)
  • 18.0 mm (52)
  • 18.3 mm (35)
  • 18.5 mm (53)
  • 18.6 mm (40)
  • 18.8 mm (36)
  • 18.9 mm (34)
  • 19.0 mm (74)
  • 19.05 mm (67)
  • 19.2 mm (58)
  • 19.228 mm (57)
  • 19.27 mm (32)
  • 19.35 mm (40)
  • 19.45 mm (32)
  • 19.5 mm (74)
  • 19.7 mm (46)
  • 20.0 mm (46)
  • 20.1 mm (34)
  • 20.5 mm (55)
  • 20.7 mm (38)
  • 21.0 mm (51)
  • 21.1 mm (35)
  • 21.5 mm (48)
  • 22.0 mm (43)
  • 22.1 mm (41)
  • 22.44 mm (37)
  • 22.5 mm (53)
  • 23.0 mm (43)
  • 23.5 mm (48)
  • 24.0 mm (41)
  • 24.5 mm (37)
  • 25.0 mm (66)
  • 25.07 mm (45)
  • 25.25 mm (39)
  • 25.3 mm (39)
  • 25.4 mm (53)
  • 25.5 mm (53)
  • 25.54 mm (38)
  • 25.6 mm (37)
  • 25.65 mm (34)
  • 25.8 mm (32)
  • 25.806 mm (38)
  • 26.0 mm (38)
  • 32.0 mm (32)
  • 34.0 mm (32)
  • 35.0 mm (32)
  • 36.0 mm (34)
  • 38.0 mm (32)
Cutting Diameter Min to Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Interrupted (72)
  • Stable (79)
  • Unstable (74)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 18.0 mm (4)
  • 19.0 mm (3)
  • 20.0 mm (22)
  • 21.0 mm (4)
  • 22.0 mm (10)
  • 23.0 mm (3)
  • 24.0 mm (6)
  • 25.0 mm (37)
  • 25.5 mm (3)
  • 26.0 mm (7)
  • 27.0 mm (7)
  • 28.5 mm (3)
  • 29.0 mm (5)
  • 30.0 mm (40)
  • 31.5 mm (3)
  • 32.0 mm (9)
  • 33.0 mm (10)
  • 34.5 mm (3)
  • 35.0 mm (24)
  • 36.0 mm (21)
  • 37.5 mm (3)
  • 38.0 mm (7)
  • 39.0 mm (7)
  • 40.0 mm (23)
  • 41.0 mm (4)
  • 42.0 mm (11)
  • 42.5 mm (3)
  • 43.0 mm (4)
  • 43.5 mm (3)
  • 44.0 mm (4)
  • 45.0 mm (23)
  • 48.0 mm (16)
  • 50.0 mm (18)
  • 51.0 mm (6)
  • 52.07 mm (3)
  • 53.0 mm (6)
  • 54.0 mm (11)
  • 55.0 mm (6)
  • 57.0 mm (6)
  • 58.0 mm (4)
  • 59.944 mm (6)
  • 60.0 mm (20)
  • 63.0 mm (8)
  • 63.5 mm (3)
  • 65.0 mm (6)
  • 65.484 mm (3)
  • 66.0 mm (9)
  • 68.0 mm (10)
  • 69.0 mm (3)
  • 70.0 mm (11)
  • 72.0 mm (16)
  • 73.0 mm (4)
  • 75.0 mm (9)
  • 76.0 mm (7)
  • 78.0 mm (10)
  • 80.0 mm (19)
  • 84.0 mm (13)
  • 85.0 mm (6)
  • 88.0 mm (6)
  • 89.916 mm (6)
  • 90.0 mm (19)
  • 92.0 mm (6)
  • 95.0 mm (9)
  • 96.0 mm (15)
  • 98.0 mm (4)
  • 99.0 mm (5)
  • 100.0 mm (24)
  • 102.0 mm (5)
  • 104.0 mm (6)
  • 105.0 mm (8)
  • 108.0 mm (11)
  • 110.0 mm (10)
  • 111.0 mm (5)
  • 112.0 mm (12)
  • 114.0 mm (4)
  • 116.0 mm (6)
  • 117.0 mm (4)
  • 120.0 mm (24)
  • 125.0 mm (4)
  • 126.0 mm (7)
  • 128.0 mm (6)
  • 130.0 mm (17)
  • 136.0 mm (7)
  • 140.0 mm (18)
  • 144.0 mm (7)
  • 150.0 mm (13)
  • 152.0 mm (5)
  • 154.0 mm (6)
  • 160.0 mm (19)
  • 165.0 mm (4)
  • 168.0 mm (13)
  • 180.0 mm (5)
  • 182.0 mm (8)
  • 185.0 mm (5)
  • 190.5 mm (5)
  • 196.0 mm (7)
  • 200.0 mm (5)
  • 210.0 mm (7)
  • 224.0 mm (8)
  • 254.0 mm (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.7087 in (3)
  • 0.748 in (3)
  • 0.787 in (4)
  • 0.7874 in (18)
  • 0.827 in (4)
  • 0.8661 in (9)
  • 0.906 in (3)
  • 0.9449 in (3)
  • 0.945 in (3)
  • 0.984 in (24)
  • 0.9843 in (13)
  • 1.024 in (4)
  • 1.063 in (7)
  • 1.1024 in (3)
  • 1.122 in (3)
  • 1.142 in (4)
  • 1.181 in (19)
  • 1.1811 in (22)
  • 1.24 in (3)
  • 1.26 in (7)
  • 1.299 in (6)
  • 1.2992 in (4)
  • 1.378 in (24)
  • 1.417 in (5)
  • 1.4173 in (16)
  • 1.496 in (6)
  • 1.535 in (4)
  • 1.5354 in (3)
  • 1.575 in (21)
  • 1.614 in (3)
  • 1.6535 in (8)
  • 1.654 in (3)
  • 1.7717 in (6)
  • 1.772 in (17)
  • 1.8898 in (10)
  • 1.89 in (7)
  • 1.968 in (6)
  • 1.969 in (9)
  • 2.087 in (5)
  • 2.126 in (11)
  • 2.244 in (4)
  • 2.36 in (6)
  • 2.362 in (9)
  • 2.3622 in (12)
  • 2.48 in (5)
  • 2.5984 in (7)
  • 2.677 in (6)
  • 2.6772 in (4)
  • 2.7559 in (8)
  • 2.8346 in (11)
  • 2.835 in (5)
  • 2.874 in (4)
  • 2.9528 in (4)
  • 2.953 in (5)
  • 2.992 in (4)
  • 3.0709 in (8)
  • 3.1496 in (11)
  • 3.15 in (9)
  • 3.307 in (4)
  • 3.3071 in (9)
  • 3.54 in (6)
  • 3.543 in (4)
  • 3.5433 in (15)
  • 3.622 in (5)
  • 3.7402 in (6)
  • 3.7795 in (9)
  • 3.78 in (8)
  • 3.8583 in (4)
  • 3.937 in (24)
  • 4.016 in (4)
  • 4.134 in (5)
  • 4.252 in (12)
  • 4.3307 in (8)
  • 4.4094 in (10)
  • 4.5669 in (4)
  • 4.724 in (7)
  • 4.7244 in (17)
  • 4.9606 in (6)
  • 5.039 in (4)
  • 5.1181 in (15)
  • 5.315 in (4)
  • 5.354 in (4)
  • 5.3543 in (4)
  • 5.5118 in (18)
  • 5.669 in (5)
  • 5.9055 in (12)
  • 6.063 in (6)
  • 6.299 in (4)
  • 6.2992 in (14)
  • 6.4961 in (4)
  • 6.6142 in (9)
  • 7.0866 in (4)
  • 7.1654 in (8)
  • 7.2835 in (5)
  • 7.5 in (5)
  • 7.7165 in (7)
  • 7.874 in (5)
  • 8.2677 in (7)
  • 8.8189 in (8)
  • 10.0 in (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.7874 in (17)
  • 0.8661 in (7)
  • 0.917 in (9)
  • 0.935 in (8)
  • 0.943 in (7)
  • 0.9843 in (14)
  • 1.101 in (6)
  • 1.114 in (7)
  • 1.146 in (3)
  • 1.1811 in (18)
  • 1.272 in (9)
  • 1.298 in (8)
  • 1.4173 in (11)
  • 1.465 in (3)
  • 1.469 in (11)
  • 1.491 in (9)
  • 1.517 in (9)
  • 1.6142 in (3)
  • 1.622 in (3)
  • 1.667 in (13)
  • 1.697 in (3)
  • 1.703 in (7)
  • 1.863 in (3)
  • 1.885 in (9)
  • 1.911 in (5)
  • 2.126 in (4)
  • 2.2047 in (3)
  • 2.236 in (4)
  • 2.2835 in (5)
  • 2.3228 in (6)
  • 2.331 in (3)
  • 2.409 in (4)
  • 2.4409 in (3)
  • 2.524 in (4)
  • 2.5919 in (3)
  • 2.5984 in (4)
  • 2.6771 in (4)
  • 2.701 in (3)
  • 2.78 in (3)
  • 2.9527 in (4)
  • 2.9528 in (4)
  • 2.9669 in (3)
  • 3.01 in (3)
  • 3.0919 in (3)
  • 3.13 in (4)
  • 3.2677 in (7)
  • 3.339 in (3)
  • 3.4252 in (7)
  • 3.433 in (3)
  • 3.4669 in (3)
  • 3.51 in (8)
  • 3.5827 in (4)
  • 3.622 in (5)
  • 3.7835 in (3)
  • 3.937 in (11)
  • 3.96 in (5)
  • 4.0335 in (3)
  • 4.2913 in (4)
  • 4.31 in (3)
  • 4.34 in (4)
  • 4.3701 in (4)
  • 4.5276 in (5)
  • 4.6063 in (5)
  • 4.61 in (3)
  • 4.642 in (3)
  • 4.9213 in (6)
  • 4.9669 in (3)
  • 5.09 in (5)
  • 5.0919 in (5)
  • 5.1575 in (3)
  • 5.1969 in (4)
  • 5.2169 in (4)
  • 5.3149 in (4)
  • 5.3419 in (4)
  • 5.3937 in (3)
  • 5.7874 in (4)
  • 5.8268 in (10)
  • 5.8419 in (6)
  • 5.85 in (4)
  • 6.3386 in (5)
  • 6.3419 in (4)
  • 6.4173 in (5)
  • 6.7169 in (4)
  • 6.811 in (4)
  • 6.8419 in (4)
  • 7.0866 in (4)
  • 7.2835 in (4)
  • 7.7165 in (5)
  • 7.7169 in (4)
  • 7.8346 in (4)
  • 7.8419 in (4)
  • 8.1693 in (5)
  • 8.3858 in (6)
  • 8.4669 in (4)
  • 9.0157 in (4)
  • 9.1693 in (5)
  • 9.59 in (5)
  • 9.6457 in (4)
  • 10.3419 in (4)
  • 10.3543 in (4)
Reach Min to Reach Max
Reach
Reach
  • 20.0 mm (17)
  • 22.0 mm (7)
  • 23.29 mm (9)
  • 23.74 mm (8)
  • 23.95 mm (7)
  • 25.0 mm (15)
  • 27.97 mm (6)
  • 28.29 mm (7)
  • 29.1 mm (3)
  • 30.0 mm (18)
  • 31.0 mm (3)
  • 32.3 mm (9)
  • 32.97 mm (8)
  • 36.0 mm (12)
  • 37.2 mm (3)
  • 37.3 mm (11)
  • 37.88 mm (9)
  • 38.53 mm (9)
  • 41.0 mm (3)
  • 41.2 mm (3)
  • 42.33 mm (13)
  • 43.0 mm (3)
  • 43.1 mm (3)
  • 43.26 mm (7)
  • 47.33 mm (3)
  • 47.88 mm (9)
  • 48.53 mm (5)
  • 49.0 mm (4)
  • 52.7 mm (3)
  • 54.0 mm (4)
  • 55.5 mm (3)
  • 56.0 mm (4)
  • 56.8 mm (3)
  • 58.0 mm (4)
  • 59.0 mm (6)
  • 59.2 mm (3)
  • 61.2 mm (5)
  • 62.0 mm (3)
  • 64.1 mm (4)
  • 65.834 mm (3)
  • 66.0 mm (4)
  • 68.0 mm (7)
  • 68.6 mm (3)
  • 75.0 mm (8)
  • 75.359 mm (3)
  • 76.454 mm (3)
  • 78.534 mm (3)
  • 79.502 mm (3)
  • 83.0 mm (7)
  • 84.8 mm (3)
  • 87.0 mm (7)
  • 87.2 mm (3)
  • 88.059 mm (3)
  • 89.154 mm (8)
  • 91.0 mm (4)
  • 92.0 mm (6)
  • 96.101 mm (3)
  • 100.0 mm (11)
  • 100.584 mm (5)
  • <