Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

KenTIP™ FS Carbide Inserts

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (483)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (483)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (483)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (483)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (483)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (483)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (483)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (483)
  • M Stainless Steel (364)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (364)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (364)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (303)
  • K Cast Iron (618)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (618)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (618)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (618)
  • N Non-Ferrous Materials (5)
    • N1
      Wrought Aluminum
      (5)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (5)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (5)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (5)
  • S High-Temp Alloys (180)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (175)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (175)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (175)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (180)
  • C CFRP Materials (10)
    • C1
      CFRP, CFRP / CFRP
      (5)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous
      (5)
    • C3
      CFRP / Titanium CFRP / High Temp
      (5)
    • C4
      CFRP / Stainless Steel
      (5)
Select First Choice
  • BR (3)
  • CN (90)
  • DE (150)
  • GB (69)
  • IN (16)
  • SG (37)
  • US (123)
Cutting Diameter
Cutting Diameter
  • 0.237 in (5)
  • 0.25 in (6)
  • 0.256 in (5)
  • 0.266 in (3)
  • 0.268 in (5)
  • 0.276 in (5)
  • 0.295 in (5)
  • 0.307 in (3)
  • 0.313 in (7)
  • 0.315 in (4)
  • 0.319 in (4)
  • 0.323 in (4)
  • 0.328 in (3)
  • 0.335 in (4)
  • 0.339 in (5)
  • 0.343 in (4)
  • 0.345 in (3)
  • 0.347 in (3)
  • 0.351 in (3)
  • 0.354 in (4)
  • 0.358 in (5)
  • 0.37 in (3)
  • 0.374 in (4)
  • 0.375 in (6)
  • 0.378 in (4)
  • 0.382 in (4)
  • 0.386 in (4)
  • 0.394 in (4)
  • 0.402 in (5)
  • 0.406 in (4)
  • 0.408 in (4)
  • 0.414 in (5)
  • 0.417 in (4)
  • 0.421 in (4)
  • 0.425 in (5)
  • 0.433 in (4)
  • 0.437 in (7)
  • 0.438 in (4)
  • 0.453 in (6)
  • 0.465 in (5)
  • 0.47 in (6)
  • 0.473 in (4)
  • 0.484 in (5)
  • 0.492 in (4)
  • 0.5 in (7)
  • 0.512 in (4)
  • 0.516 in (4)
  • 0.52 in (4)
  • 0.531 in (8)
  • 0.543 in (4)
  • 0.547 in (6)
  • 0.551 in (4)
  • 0.555 in (4)
  • 0.564 in (8)
  • 0.572 in (4)
  • 0.578 in (5)
  • 0.583 in (4)
  • 0.591 in (4)
  • 0.595 in (4)
  • 0.598 in (4)
  • 0.602 in (4)
  • 0.61 in (5)
  • 0.625 in (5)
  • 0.63 in (4)
  • 0.634 in (7)
  • 0.65 in (5)
  • 0.656 in (5)
  • 0.669 in (4)
  • 0.687 in (4)
  • 0.69 in (5)
  • 0.698 in (5)
  • 0.709 in (4)
  • 0.719 in (4)
  • 0.728 in (5)
  • 0.748 in (4)
  • 0.75 in (5)
  • 0.756 in (4)
  • 0.759 in (4)
  • 0.766 in (5)
  • 0.768 in (5)
  • 0.781 in (4)
  • 0.787 in (4)
  • 0.807 in (5)
  • 0.814 in (5)
  • 0.828 in (5)
  • 0.846 in (5)
  • 0.866 in (4)
  • 0.875 in (5)
  • 0.886 in (5)
  • 0.906 in (4)
  • 0.925 in (5)
  • 0.937 in (5)
  • 0.946 in (4)
  • 0.965 in (5)
  • 0.984 in (4)
  • 1.0 in (5)
  • 1.004 in (4)
  • 1.012 in (5)
  • 1.016 in (4)
  • 1.024 in (5)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 6.0 mm (5)
  • 6.351 mm (6)
  • 6.5 mm (5)
  • 6.75 mm (3)
  • 6.801 mm (5)
  • 7.0 mm (5)
  • 7.5 mm (5)
  • 7.801 mm (3)
  • 7.95 mm (7)
  • 8.0 mm (4)
  • 8.1 mm (4)
  • 8.201 mm (4)
  • 8.326 mm (3)
  • 8.5 mm (4)
  • 8.6 mm (5)
  • 8.701 mm (4)
  • 8.725 mm (3)
  • 8.8 mm (3)
  • 8.9 mm (3)
  • 9.0 mm (4)
  • 9.1 mm (5)
  • 9.4 mm (3)
  • 9.5 mm (4)
  • 9.525 mm (6)
  • 9.601 mm (4)
  • 9.701 mm (4)
  • 9.8 mm (4)
  • 10.0 mm (4)
  • 10.201 mm (5)
  • 10.3 mm (4)
  • 10.326 mm (4)
  • 10.5 mm (5)
  • 10.601 mm (4)
  • 10.701 mm (4)
  • 10.8 mm (5)
  • 11.0 mm (4)
  • 11.101 mm (7)
  • 11.125 mm (4)
  • 11.5 mm (6)
  • 11.8 mm (5)
  • 11.9 mm (6)
  • 12.0 mm (4)
  • 12.3 mm (5)
  • 12.5 mm (4)
  • 12.701 mm (7)
  • 13.0 mm (4)
  • 13.101 mm (4)
  • 13.201 mm (4)
  • 13.5 mm (8)
  • 13.8 mm (4)
  • 13.9 mm (6)
  • 14.0 mm (4)
  • 14.101 mm (4)
  • 14.3 mm (8)
  • 14.5 mm (4)
  • 14.675 mm (5)
  • 14.8 mm (4)
  • 15.0 mm (4)
  • 15.101 mm (4)
  • 15.201 mm (4)
  • 15.3 mm (4)
  • 15.5 mm (5)
  • 15.875 mm (5)
  • 16.0 mm (4)
  • 16.1 mm (7)
  • 16.5 mm (5)
  • 16.675 mm (5)
  • 17.0 mm (4)
  • 17.45 mm (4)
  • 17.5 mm (5)
  • 17.7 mm (5)
  • 18.0 mm (4)
  • 18.25 mm (4)
  • 18.5 mm (5)
  • 19.0 mm (4)
  • 19.05 mm (5)
  • 19.201 mm (4)
  • 19.276 mm (4)
  • 19.451 mm (5)
  • 19.5 mm (5)
  • 19.85 mm (4)
  • 20.0 mm (4)
  • 20.5 mm (5)
  • 20.651 mm (5)
  • 21.0 mm (5)
  • 21.5 mm (5)
  • 22.0 mm (4)
  • 22.225 mm (5)
  • 22.5 mm (5)
  • 23.0 mm (4)
  • 23.5 mm (5)
  • 23.8 mm (5)
  • 24.0 mm (4)
  • 24.5 mm (5)
  • 25.0 mm (4)
  • 25.401 mm (5)
  • 25.5 mm (4)
  • 25.675 mm (4)
  • 25.8 mm (4)
  • 26.0 mm (5)
Cutting Diameter Min to Cutting Diameter Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC7325 (175)
  • KC7410 (135)
  • KCC10 (5)
  • KCMS15 (128)
  • KCP15A (308)
  • KN15 (5)
Front-End
Point Angle
Point Angle
  • 128.0 (10)
  • 140.0 (303)
  • 143.0 (382)
  • 180.0 (61)
Point Angle Min to Point Angle Max
Insert Geometry
Insert Seat Size
Insert Seat Size
  • A (8)
  • B (15)
  • C (15)
  • D (12)
  • E (20)
  • F (21)
  • G (24)
  • H (19)
  • I (31)
  • J (28)
  • K (23)
  • L (23)
  • M (22)
  • N (18)
  • O (19)
  • P (23)
  • Q (21)
  • R (22)
  • S (18)
  • T (42)
  • U (45)
  • V (46)
  • W (33)
  • X (51)
  • Y (29)
  • Z (23)
  • ZA (24)
  • ZB (24)
  • ZC (20)
  • ZD (37)
Cutting Tool Material
Cutting Tool Material
  • D P (5)
  • H W (750)
Cutting Diameter Insert
Cutting Diameter Insert
  • 0.237 in (5)
  • 0.25 in (6)
  • 0.256 in (5)
  • 0.266 in (3)
  • 0.268 in (5)
  • 0.276 in (5)
  • 0.295 in (5)
  • 0.307 in (3)
  • 0.313 in (7)
  • 0.315 in (4)
  • 0.319 in (4)
  • 0.323 in (4)
  • 0.328 in (3)
  • 0.335 in (4)
  • 0.339 in (5)
  • 0.343 in (4)
  • 0.345 in (3)
  • 0.347 in (3)
  • 0.351 in (3)
  • 0.354 in (4)
  • 0.358 in (5)
  • 0.37 in (3)
  • 0.374 in (4)
  • 0.375 in (6)
  • 0.378 in (4)
  • 0.382 in (4)
  • 0.386 in (4)
  • 0.394 in (4)
  • 0.402 in (5)
  • 0.406 in (4)
  • 0.408 in (4)
  • 0.414 in (5)
  • 0.417 in (4)
  • 0.421 in (4)
  • 0.425 in (5)
  • 0.433 in (4)
  • 0.437 in (7)
  • 0.438 in (4)
  • 0.453 in (6)
  • 0.465 in (5)
  • 0.47 in (6)
  • 0.473 in (4)
  • 0.484 in (5)
  • 0.492 in (4)
  • 0.5 in (7)
  • 0.512 in (4)
  • 0.516 in (4)
  • 0.52 in (4)
  • 0.531 in (8)
  • 0.543 in (4)
  • 0.547 in (6)
  • 0.551 in (4)
  • 0.555 in (4)
  • 0.564 in (8)
  • 0.572 in (4)
  • 0.578 in (5)
  • 0.583 in (4)
  • 0.591 in (4)
  • 0.595 in (4)
  • 0.598 in (4)
  • 0.602 in (4)
  • 0.61 in (5)
  • 0.625 in (5)
  • 0.63 in (4)
  • 0.634 in (7)
  • 0.65 in (5)
  • 0.656 in (5)
  • 0.669 in (4)
  • 0.687 in (4)
  • 0.69 in (5)
  • 0.698 in (5)
  • 0.709 in (4)
  • 0.719 in (4)
  • 0.728 in (5)
  • 0.748 in (4)
  • 0.75 in (5)
  • 0.756 in (4)
  • 0.759 in (4)
  • 0.766 in (5)
  • 0.768 in (5)
  • 0.781 in (4)
  • 0.787 in (4)
  • 0.807 in (5)
  • 0.814 in (5)
  • 0.828 in (5)
  • 0.846 in (5)
  • 0.866 in (4)
  • 0.875 in (5)
  • 0.886 in (5)
  • 0.906 in (4)
  • 0.925 in (5)
  • 0.937 in (5)
  • 0.946 in (4)
  • 0.965 in (5)
  • 0.984 in (4)
  • 1.0 in (5)
  • 1.004 in (4)
  • 1.012 in (5)
  • 1.016 in (4)
  • 1.024 in (5)
Cutting Diameter Insert Min to Cutting Diameter Insert Max
Cutting Diameter Insert
Cutting Diameter Insert
  • 6.0 mm (5)
  • 6.351 mm (6)
  • 6.5 mm (5)
  • 6.75 mm (3)
  • 6.801 mm (5)
  • 7.0 mm (5)
  • 7.5 mm (5)
  • 7.801 mm (3)
  • 7.95 mm (7)
  • 8.0 mm (4)
  • 8.1 mm (4)
  • 8.201 mm (4)
  • 8.326 mm (3)
  • 8.5 mm (4)
  • 8.6 mm (5)
  • 8.701 mm (4)
  • 8.725 mm (3)
  • 8.8 mm (3)
  • 8.9 mm (3)
  • 9.0 mm (4)
  • 9.1 mm (5)
  • 9.4 mm (3)
  • 9.5 mm (4)
  • 9.525 mm (6)
  • 9.601 mm (4)
  • 9.701 mm (4)
  • 9.8 mm (4)
  • 10.0 mm (4)
  • 10.201 mm (5)
  • 10.3 mm (4)
  • 10.326 mm (4)
  • 10.5 mm (5)
  • 10.601 mm (4)
  • 10.701 mm (4)
  • 10.8 mm (5)
  • 11.0 mm (4)
  • 11.101 mm (7)
  • 11.125 mm (4)
  • 11.5 mm (6)
  • 11.8 mm (5)
  • 11.9 mm (6)
  • 12.0 mm (4)
  • 12.3 mm (5)
  • 12.5 mm (4)
  • 12.701 mm (7)
  • 13.0 mm (4)
  • 13.101 mm (4)
  • 13.201 mm (4)
  • 13.5 mm (8)
  • 13.8 mm (4)
  • 13.9 mm (6)
  • 14.0 mm (4)
  • 14.101 mm (4)
  • 14.3 mm (8)
  • 14.5 mm (4)
  • 14.675 mm (5)
  • 14.8 mm (4)
  • 15.0 mm (4)
  • 15.101 mm (4)
  • 15.201 mm (4)
  • 15.3 mm (4)
  • 15.5 mm (5)
  • 15.875 mm (5)
  • 16.0 mm (4)
  • 16.1 mm (7)
  • 16.5 mm (5)
  • 16.675 mm (5)
  • 17.0 mm (4)
  • 17.45 mm (4)
  • 17.5 mm (5)
  • 17.7 mm (5)
  • 18.0 mm (4)
  • 18.25 mm (4)
  • 18.5 mm (5)
  • 19.0 mm (4)
  • 19.05 mm (5)
  • 19.201 mm (4)
  • 19.276 mm (4)
  • 19.451 mm (5)
  • 19.5 mm (5)
  • 19.85 mm (4)
  • 20.0 mm (4)
  • 20.5 mm (5)
  • 20.651 mm (5)
  • 21.0 mm (5)
  • 21.5 mm (5)
  • 22.0 mm (4)
  • 22.225 mm (5)
  • 22.5 mm (5)
  • 23.0 mm (4)
  • 23.5 mm (5)
  • 23.8 mm (5)
  • 24.0 mm (4)
  • 24.5 mm (5)
  • 25.0 mm (4)
  • 25.401 mm (5)
  • 25.5 mm (4)
  • 25.675 mm (4)
  • 25.8 mm (4)
  • 26.0 mm (5)
Cutting Diameter Insert Min to Cutting Diameter Insert Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Modular Drills

Modular Drilling • Carbide Insert for KenTIP™ FS
(128 Products)
  • DrillingDrilling
  • Drilling: Inclined ExitDrilling: Inclined Exit
  • Tool Dimensions: 2flute/2margin/coolantTool Dimensions: 2flute/2margin/coolant
  • Drilling: Stacked PlatesDrilling: Stacked Plates
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Drill Diameter [D1] Drill Diameter [L5] Drill Point Length [L5] Drill Point Length [SSC] Insert Seat Size
6370994 KTFST08100HPLM KTFST08100HPLM KCMS15   8.1000 .3189 1.7400 .0685 F
    List price:
    $88,45 /each.
    Your price::
    Qty
    6371043 KTFST09800HPLM KTFST09800HPLM KCMS15   9.8000 .3858 2.0900 .0823 I
      List price:
      $88,45 /each.
      Your price::
      Qty
      6371076 KTFST13500HPLM KTFST13500HPLM KCMS15   13.5000 .5315 2.8400 .1118 Q