Product Suggestions

Product Family suggestions

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read

KSEM Bodies

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (553)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (553)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (553)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (553)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (553)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (553)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (553)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (553)
  • M Stainless Steel (549)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (549)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (549)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (549)
  • K Cast Iron (553)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (553)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (553)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (553)
  • N Non-Ferrous Materials (549)
    • N1
      Wrought Aluminum
      (549)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (549)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (549)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (549)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (549)
    • N6
      Carbon, Graphite Composites, CFRP
      (549)
    • N7
      MMC's
      (549)
  • S High-Temp Alloys (549)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (549)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (549)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (549)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (549)
Select First Choice
  • BR (51)
  • CN (109)
  • DE (88)
  • GB (75)
  • IN (41)
  • SG (64)
  • US (111)
Applications
Applications
  • Drilling Drilling (553)
  • Inclined Entry Drilling Inclined Entry Drilling (549)
  • Inclined Exit Drilling Inclined Exit Drilling (549)
  • Stacked Plates Drilling Stacked Plates Drilling (549)
Cutting Diameter
Cutting Diameter
  • 0.492 in (20)
  • 0.496 in (20)
  • 0.5 in (20)
  • 0.504 in (20)
  • 0.509 in (20)
  • 0.512 in (29)
  • 0.516 in (24)
  • 0.52 in (24)
  • 0.531 in (21)
  • 0.551 in (22)
  • 0.555 in (17)
  • 0.557 in (17)
  • 0.559 in (17)
  • 0.564 in (17)
  • 0.591 in (28)
  • 0.594 in (23)
  • 0.602 in (18)
  • 0.609 in (18)
  • 0.61 in (22)
  • 0.63 in (21)
  • 0.632 in (21)
  • 0.634 in (21)
  • 0.636 in (21)
  • 0.638 in (21)
  • 0.641 in (21)
  • 0.65 in (22)
  • 0.654 in (18)
  • 0.669 in (24)
  • 0.672 in (20)
  • 0.683 in (16)
  • 0.687 in (16)
  • 0.69 in (23)
  • 0.694 in (16)
  • 0.698 in (16)
  • 0.748 in (34)
  • 0.75 in (30)
  • 0.756 in (27)
  • 0.757 in (27)
  • 0.758 in (27)
  • 0.759 in (27)
  • 0.761 in (27)
  • 0.762 in (27)
  • 0.763 in (27)
  • 0.766 in (27)
  • 0.768 in (36)
  • 0.774 in (18)
  • 0.776 in (18)
  • 0.807 in (20)
  • 0.828 in (20)
  • 0.846 in (18)
  • 0.87 in (22)
  • 0.872 in (22)
  • 0.875 in (22)
  • 0.884 in (22)
  • 0.886 in (26)
  • 0.891 in (23)
  • 0.906 in (17)
  • 0.925 in (24)
  • 0.984 in (40)
  • 0.987 in (35)
  • 0.994 in (29)
  • 0.996 in (29)
  • 1.0 in (29)
  • 1.004 in (29)
  • 1.006 in (29)
  • 1.008 in (23)
  • 1.01 in (23)
  • 1.012 in (23)
  • 1.014 in (23)
  • 1.016 in (23)
  • 1.063 in (19)
  • 1.083 in (18)
  • 1.122 in (18)
  • 1.143 in (21)
  • 1.201 in (20)
  • 1.203 in (17)
  • 1.24 in (22)
  • 1.25 in (18)
  • 1.26 in (22)
  • 1.299 in (20)
  • 1.313 in (17)
  • 1.315 in (17)
  • 1.319 in (19)
  • 1.328 in (17)
  • 1.339 in (22)
  • 1.344 in (20)
  • 1.358 in (20)
  • 1.375 in (18)
  • 1.379 in (22)
  • 1.399 in (21)
  • 1.407 in (21)
  • 1.417 in (23)
  • 1.457 in (18)
  • 1.496 in (22)
  • 1.5 in (20)
  • 1.514 in (19)
  • 1.516 in (17)
  • 1.536 in (21)
  • 1.543 in (17)
  • 1.575 in (17)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 12.5 mm (20)
  • 12.601 mm (20)
  • 12.701 mm (20)
  • 12.8 mm (20)
  • 12.925 mm (20)
  • 13.0 mm (29)
  • 13.101 mm (24)
  • 13.201 mm (24)
  • 13.5 mm (21)
  • 14.0 mm (22)
  • 14.101 mm (17)
  • 14.15 mm (17)
  • 14.201 mm (17)
  • 14.3 mm (17)
  • 15.0 mm (28)
  • 15.076 mm (23)
  • 15.3 mm (18)
  • 15.476 mm (18)
  • 15.5 mm (22)
  • 16.0 mm (21)
  • 16.05 mm (21)
  • 16.1 mm (21)
  • 16.151 mm (21)
  • 16.2 mm (21)
  • 16.276 mm (21)
  • 16.5 mm (22)
  • 16.6 mm (18)
  • 17.0 mm (24)
  • 17.075 mm (20)
  • 17.35 mm (16)
  • 17.45 mm (16)
  • 17.5 mm (23)
  • 17.6 mm (16)
  • 19.0 mm (34)
  • 19.05 mm (30)
  • 19.201 mm (27)
  • 19.225 mm (27)
  • 19.25 mm (27)
  • 19.276 mm (27)
  • 19.326 mm (27)
  • 19.35 mm (27)
  • 19.375 mm (27)
  • 19.451 mm (27)
  • 19.5 mm (36)
  • 19.651 mm (18)
  • 19.701 mm (18)
  • 20.5 mm (20)
  • 21.0 mm (20)
  • 21.5 mm (18)
  • 22.1 mm (22)
  • 22.151 mm (22)
  • 22.225 mm (22)
  • 22.451 mm (22)
  • 22.5 mm (26)
  • 22.625 mm (23)
  • 23.0 mm (17)
  • 23.5 mm (24)
  • 25.0 mm (40)
  • 25.076 mm (35)
  • 25.25 mm (29)
  • 25.3 mm (29)
  • 25.401 mm (29)
  • 25.5 mm (29)
  • 25.55 mm (29)
  • 25.6 mm (23)
  • 25.651 mm (23)
  • 25.675 mm (23)
  • 25.725 mm (23)
  • 25.75 mm (23)
  • 25.8 mm (23)
  • 27.0 mm (19)
  • 27.5 mm (18)
  • 28.5 mm (18)
  • 29.0 mm (21)
  • 30.5 mm (20)
  • 30.55 mm (17)
  • 31.5 mm (22)
  • 31.75 mm (18)
  • 32.0 mm (22)
  • 33.0 mm (20)
  • 33.35 mm (17)
  • 33.4 mm (17)
  • 33.5 mm (19)
  • 33.725 mm (17)
  • 34.0 mm (22)
  • 34.125 mm (20)
  • 34.5 mm (20)
  • 34.926 mm (18)
  • 35.0 mm (22)
  • 35.5 mm (21)
  • 35.725 mm (21)
  • 36.0 mm (23)
  • 37.0 mm (18)
  • 38.0 mm (22)
  • 38.1 mm (20)
  • 38.45 mm (19)
  • 38.5 mm (17)
  • 39.0 mm (21)
  • 39.2 mm (17)
  • 40.0 mm (17)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 13.451 mm (1)
  • 13.5 mm (1)
  • 16.0 mm (2)
  • 38.1 mm (2)
  • 38.776 mm (2)
  • 40.475 mm (2)
  • 41.676 mm (2)
  • 42.0 mm (5)
  • 42.875 mm (2)
  • 44.051 mm (2)
  • 45.25 mm (2)
  • 46.426 mm (2)
  • 48.0 mm (6)
  • 52.075 mm (3)
  • 54.0 mm (5)
  • 57.151 mm (2)
  • 59.95 mm (5)
  • 60.0 mm (6)
  • 63.5 mm (3)
  • 64.65 mm (2)
  • 65.476 mm (3)
  • 66.0 mm (5)
  • 66.675 mm (2)
  • 67.476 mm (2)
  • 69.45 mm (2)
  • 70.0 mm (5)
  • 71.45 mm (2)
  • 71.875 mm (3)
  • 72.0 mm (7)
  • 75.4 mm (2)
  • 77.4 mm (2)
  • 77.976 mm (2)
  • 78.0 mm (7)
  • 80.0 mm (7)
  • 84.0 mm (5)
  • 84.075 mm (3)
  • 88.9 mm (2)
  • 89.926 mm (6)
  • 90.0 mm (12)
  • 90.5 mm (2)
  • 95.25 mm (2)
  • 96.0 mm (9)
  • 98.0 mm (4)
  • 99.0 mm (5)
  • 100.0 mm (11)
  • 100.025 mm (2)
  • 100.075 mm (3)
  • 102.0 mm (4)
  • 105.0 mm (4)
  • 108.0 mm (4)
  • 109.976 mm (2)
  • 110.0 mm (6)
  • 111.0 mm (5)
  • 112.0 mm (6)
  • 114.0 mm (3)
  • 117.0 mm (4)
  • 119.9 mm (2)
  • 120.0 mm (14)
  • 126.0 mm (6)
  • 127.0 mm (2)
  • 130.0 mm (14)
  • 135.0 mm (2)
  • 139.951 mm (2)
  • 140.0 mm (17)
  • 145.0 mm (2)
  • 150.0 mm (9)
  • 150.125 mm (2)
  • 152.4 mm (2)
  • 154.0 mm (6)
  • 160.0 mm (14)
  • 162.701 mm (2)
  • 164.701 mm (2)
  • 165.0 mm (4)
  • 166.701 mm (3)
  • 168.0 mm (8)
  • 168.701 mm (2)
  • 170.0 mm (3)
  • 170.701 mm (2)
  • 174.601 mm (2)
  • 175.0 mm (3)
  • 177.8 mm (2)
  • 180.0 mm (4)
  • 180.601 mm (2)
  • 182.0 mm (8)
  • 182.576 mm (2)
  • 185.0 mm (5)
  • 190.0 mm (3)
  • 190.5 mm (5)
  • 192.3 mm (2)
  • 195.0 mm (3)
  • 196.0 mm (7)
  • 200.0 mm (3)
  • 203.201 mm (2)
  • 210.0 mm (7)
  • 224.0 mm (8)
  • 225.0 mm (2)
  • 245.0 mm (2)
  • 254.0 mm (4)
  • 265.0 mm (2)
  • 285.0 mm (2)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.53 in (1)
  • 0.531 in (1)
  • 0.63 in (2)
  • 1.5 in (2)
  • 1.528 in (2)
  • 1.594 in (2)
  • 1.641 in (2)
  • 1.655 in (5)
  • 1.688 in (2)
  • 1.734 in (2)
  • 1.782 in (2)
  • 1.828 in (2)
  • 1.891 in (6)
  • 2.05 in (3)
  • 2.126 in (5)
  • 2.25 in (2)
  • 2.36 in (5)
  • 2.362 in (6)
  • 2.5 in (3)
  • 2.545 in (2)
  • 2.578 in (3)
  • 2.598 in (5)
  • 2.625 in (2)
  • 2.657 in (2)
  • 2.734 in (2)
  • 2.757 in (5)
  • 2.813 in (2)
  • 2.83 in (3)
  • 2.835 in (7)
  • 2.969 in (2)
  • 3.047 in (2)
  • 3.071 in (9)
  • 3.15 in (7)
  • 3.307 in (5)
  • 3.31 in (3)
  • 3.5 in (2)
  • 3.54 in (6)
  • 3.543 in (12)
  • 3.563 in (2)
  • 3.75 in (2)
  • 3.781 in (9)
  • 3.858 in (4)
  • 3.898 in (5)
  • 3.938 in (13)
  • 3.94 in (3)
  • 4.016 in (4)
  • 4.134 in (4)
  • 4.252 in (4)
  • 4.33 in (2)
  • 4.331 in (6)
  • 4.37 in (5)
  • 4.409 in (6)
  • 4.488 in (3)
  • 4.606 in (4)
  • 4.72 in (2)
  • 4.724 in (14)
  • 4.961 in (6)
  • 5.0 in (2)
  • 5.118 in (14)
  • 5.315 in (2)
  • 5.51 in (2)
  • 5.513 in (17)
  • 5.71 in (2)
  • 5.906 in (9)
  • 5.91 in (2)
  • 6.0 in (2)
  • 6.063 in (6)
  • 6.299 in (14)
  • 6.406 in (2)
  • 6.484 in (2)
  • 6.496 in (4)
  • 6.563 in (3)
  • 6.614 in (8)
  • 6.642 in (2)
  • 6.694 in (3)
  • 6.721 in (2)
  • 6.875 in (3)
  • 6.891 in (3)
  • 7.0 in (2)
  • 7.032 in (2)
  • 7.087 in (4)
  • 7.11 in (2)
  • 7.165 in (8)
  • 7.188 in (2)
  • 7.283 in (5)
  • 7.343 in (2)
  • 7.48 in (3)
  • 7.5 in (5)
  • 7.571 in (2)
  • 7.678 in (3)
  • 7.718 in (7)
  • 7.875 in (4)
  • 8.0 in (2)
  • 8.268 in (7)
  • 8.819 in (8)
  • 8.858 in (2)
  • 9.646 in (2)
  • 10.0 in (4)
  • 10.433 in (2)
  • 11.22 in (2)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 2.092 in (2)
  • 2.126 in (2)
  • 2.217 in (2)
  • 2.323 in (5)
  • 2.342 in (2)
  • 2.467 in (2)
  • 2.592 in (3)
  • 2.677 in (5)
  • 2.717 in (2)
  • 2.842 in (2)
  • 2.953 in (4)
  • 2.967 in (3)
  • 3.011 in (2)
  • 3.092 in (3)
  • 3.13 in (2)
  • 3.217 in (2)
  • 3.269 in (3)
  • 3.426 in (5)
  • 3.467 in (3)
  • 3.511 in (8)
  • 3.592 in (2)
  • 3.622 in (5)
  • 3.717 in (2)
  • 3.842 in (2)
  • 3.938 in (8)
  • 3.96 in (5)
  • 3.967 in (2)
  • 4.01 in (2)
  • 4.093 in (2)
  • 4.13 in (2)
  • 4.29 in (2)
  • 4.291 in (4)
  • 4.311 in (3)
  • 4.34 in (4)
  • 4.343 in (2)
  • 4.37 in (3)
  • 4.38 in (2)
  • 4.468 in (2)
  • 4.529 in (5)
  • 4.606 in (4)
  • 4.61 in (3)
  • 4.718 in (2)
  • 4.843 in (3)
  • 4.882 in (2)
  • 4.92 in (2)
  • 4.921 in (4)
  • 4.968 in (3)
  • 5.09 in (5)
  • 5.093 in (4)
  • 5.197 in (4)
  • 5.218 in (3)
  • 5.255 in (2)
  • 5.315 in (4)
  • 5.34 in (2)
  • 5.343 in (3)
  • 5.354 in (2)
  • 5.394 in (3)
  • 5.67 in (2)
  • 5.787 in (5)
  • 5.827 in (8)
  • 5.843 in (6)
  • 5.851 in (3)
  • 6.024 in (3)
  • 6.142 in (3)
  • 6.339 in (5)
  • 6.343 in (4)
  • 6.36 in (3)
  • 6.417 in (4)
  • 6.496 in (3)
  • 6.718 in (4)
  • 6.811 in (4)
  • 6.843 in (4)
  • 7.047 in (3)
  • 7.087 in (4)
  • 7.283 in (4)
  • 7.718 in (9)
  • 7.835 in (4)
  • 7.843 in (4)
  • 8.169 in (5)
  • 8.189 in (3)
  • 8.342 in (3)
  • 8.387 in (6)
  • 8.425 in (3)
  • 8.467 in (4)
  • 8.594 in (3)
  • 8.673 in (3)
  • 9.016 in (4)
  • 9.09 in (3)
  • 9.092 in (3)
  • 9.169 in (5)
  • 9.291 in (3)
  • 9.409 in (3)
  • 9.59 in (5)
  • 9.646 in (4)
  • 9.717 in (3)
  • 10.157 in (3)
  • 10.342 in (4)
  • 10.355 in (4)
  • 11.063 in (3)
  • 12.795 in (3)
Reach Min to Reach Max