Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

KSEM Carbide Inserts

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (778)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (778)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (778)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (778)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (778)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (585)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (585)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (585)
  • M Stainless Steel (454)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (454)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (454)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (454)
  • K Cast Iron (473)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (473)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (473)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (473)
  • N Non-Ferrous Materials (341)
    • N1
      Wrought Aluminum
      (341)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (341)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (341)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (341)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (261)
    • N6
      Carbon, Graphite Composites, CFRP
      (261)
    • N7
      MMC's
      (261)
  • S High-Temp Alloys (341)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (341)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (341)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (341)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (341)
Select First Choice
  • BR (60)
  • CN (156)
  • DE (157)
  • GB (124)
  • IN (148)
  • SG (97)
  • US (146)
Cutting Diameter
Cutting Diameter
  • 0.492 in (8)
  • 0.5 in (6)
  • 0.504 in (4)
  • 0.509 in (4)
  • 0.512 in (8)
  • 0.531 in (8)
  • 0.543 in (4)
  • 0.551 in (8)
  • 0.555 in (5)
  • 0.564 in (5)
  • 0.572 in (8)
  • 0.578 in (5)
  • 0.583 in (4)
  • 0.591 in (8)
  • 0.594 in (4)
  • 0.61 in (8)
  • 0.614 in (4)
  • 0.622 in (4)
  • 0.625 in (6)
  • 0.63 in (8)
  • 0.634 in (6)
  • 0.638 in (6)
  • 0.641 in (6)
  • 0.65 in (8)
  • 0.656 in (6)
  • 0.669 in (8)
  • 0.672 in (5)
  • 0.687 in (6)
  • 0.69 in (8)
  • 0.704 in (4)
  • 0.709 in (8)
  • 0.719 in (5)
  • 0.728 in (8)
  • 0.734 in (4)
  • 0.748 in (8)
  • 0.75 in (7)
  • 0.757 in (4)
  • 0.758 in (4)
  • 0.759 in (5)
  • 0.766 in (5)
  • 0.768 in (8)
  • 0.781 in (7)
  • 0.787 in (8)
  • 0.797 in (6)
  • 0.807 in (8)
  • 0.814 in (6)
  • 0.828 in (8)
  • 0.844 in (4)
  • 0.846 in (8)
  • 0.859 in (4)
  • 0.866 in (8)
  • 0.875 in (6)
  • 0.884 in (5)
  • 0.886 in (8)
  • 0.906 in (8)
  • 0.922 in (5)
  • 0.925 in (8)
  • 0.937 in (6)
  • 0.946 in (8)
  • 0.965 in (8)
  • 0.969 in (5)
  • 0.984 in (8)
  • 1.0 in (7)
  • 1.004 in (8)
  • 1.008 in (5)
  • 1.01 in (4)
  • 1.012 in (6)
  • 1.016 in (4)
  • 1.024 in (8)
  • 1.032 in (7)
  • 1.043 in (8)
  • 1.063 in (8)
  • 1.083 in (7)
  • 1.102 in (8)
  • 1.109 in (4)
  • 1.122 in (8)
  • 1.125 in (6)
  • 1.143 in (8)
  • 1.156 in (5)
  • 1.161 in (8)
  • 1.172 in (4)
  • 1.181 in (8)
  • 1.187 in (4)
  • 1.201 in (8)
  • 1.22 in (8)
  • 1.24 in (5)
  • 1.25 in (7)
  • 1.26 in (8)
  • 1.28 in (5)
  • 1.299 in (7)
  • 1.339 in (8)
  • 1.375 in (4)
  • 1.379 in (8)
  • 1.417 in (8)
  • 1.437 in (5)
  • 1.457 in (6)
  • 1.476 in (6)
  • 1.496 in (8)
  • 1.536 in (8)
  • 1.575 in (8)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 12.5 mm (8)
  • 12.701 mm (6)
  • 12.8 mm (4)
  • 12.925 mm (4)
  • 13.0 mm (8)
  • 13.5 mm (8)
  • 13.8 mm (4)
  • 14.0 mm (8)
  • 14.101 mm (5)
  • 14.3 mm (5)
  • 14.5 mm (8)
  • 14.675 mm (5)
  • 14.8 mm (4)
  • 15.0 mm (8)
  • 15.076 mm (4)
  • 15.5 mm (8)
  • 15.601 mm (4)
  • 15.8 mm (4)
  • 15.875 mm (6)
  • 16.0 mm (8)
  • 16.1 mm (6)
  • 16.2 mm (6)
  • 16.276 mm (6)
  • 16.5 mm (8)
  • 16.675 mm (6)
  • 17.0 mm (8)
  • 17.075 mm (5)
  • 17.45 mm (6)
  • 17.5 mm (8)
  • 17.85 mm (4)
  • 18.0 mm (8)
  • 18.25 mm (5)
  • 18.5 mm (8)
  • 18.651 mm (4)
  • 19.0 mm (8)
  • 19.05 mm (7)
  • 19.225 mm (4)
  • 19.25 mm (4)
  • 19.276 mm (5)
  • 19.451 mm (5)
  • 19.5 mm (8)
  • 19.85 mm (7)
  • 20.0 mm (8)
  • 20.25 mm (6)
  • 20.5 mm (8)
  • 20.651 mm (6)
  • 21.0 mm (8)
  • 21.425 mm (4)
  • 21.5 mm (8)
  • 21.826 mm (4)
  • 22.0 mm (8)
  • 22.225 mm (6)
  • 22.451 mm (5)
  • 22.5 mm (8)
  • 23.0 mm (8)
  • 23.425 mm (5)
  • 23.5 mm (8)
  • 23.8 mm (6)
  • 24.0 mm (8)
  • 24.5 mm (8)
  • 24.6 mm (5)
  • 25.0 mm (8)
  • 25.401 mm (7)
  • 25.5 mm (8)
  • 25.6 mm (5)
  • 25.651 mm (4)
  • 25.675 mm (6)
  • 25.8 mm (4)
  • 26.0 mm (8)
  • 26.201 mm (7)
  • 26.5 mm (8)
  • 27.0 mm (8)
  • 27.5 mm (7)
  • 28.0 mm (8)
  • 28.175 mm (4)
  • 28.5 mm (8)
  • 28.576 mm (6)
  • 29.0 mm (8)
  • 29.375 mm (5)
  • 29.5 mm (8)
  • 29.776 mm (4)
  • 30.0 mm (8)
  • 30.151 mm (4)
  • 30.5 mm (8)
  • 31.0 mm (8)
  • 31.5 mm (5)
  • 31.75 mm (7)
  • 32.0 mm (8)
  • 32.5 mm (5)
  • 33.0 mm (7)
  • 34.0 mm (8)
  • 34.926 mm (4)
  • 35.0 mm (8)
  • 36.0 mm (8)
  • 36.5 mm (5)
  • 37.0 mm (6)
  • 37.5 mm (6)
  • 38.0 mm (8)
  • 39.0 mm (8)
  • 40.0 mm (8)
Cutting Diameter Min to Cutting Diameter Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC7135 (52)
  • KC7315 (272)
  • KC7410 (73)
  • KCMS15 (124)
  • KCMS35 (80)
  • KCPM45 (177)
Front-End
Point Angle
Point Angle
  • 140.0 (662)
  • 150.0 (52)
  • 180.0 (63)
Point Angle Min to Point Angle Max
Insert Geometry
Insert Seat Size
Insert Seat Size
  • 1 (94)
  • 10 (58)
  • 2 (77)
  • 3 (69)
  • 4 (65)
  • 5 (70)
  • 6 (49)
  • 7 (54)
  • 8 (45)
  • 9 (63)
  • A (46)
  • B (44)
  • C (44)
Cutting Tool Material
Cutting Tool Material
  • H W (777)
Cutting Diameter Insert
Cutting Diameter Insert
  • 0.492 in (8)
  • 0.5 in (6)
  • 0.504 in (4)
  • 0.509 in (4)
  • 0.512 in (8)
  • 0.531 in (8)
  • 0.543 in (4)
  • 0.551 in (8)
  • 0.555 in (5)
  • 0.564 in (5)
  • 0.572 in (8)
  • 0.578 in (5)
  • 0.583 in (4)
  • 0.591 in (8)
  • 0.594 in (4)
  • 0.61 in (8)
  • 0.614 in (4)
  • 0.622 in (4)
  • 0.625 in (6)
  • 0.63 in (8)
  • 0.634 in (6)
  • 0.638 in (6)
  • 0.641 in (6)
  • 0.65 in (8)
  • 0.656 in (6)
  • 0.669 in (8)
  • 0.672 in (5)
  • 0.687 in (6)
  • 0.69 in (8)
  • 0.704 in (4)
  • 0.709 in (8)
  • 0.719 in (5)
  • 0.728 in (8)
  • 0.734 in (4)
  • 0.748 in (8)
  • 0.75 in (7)
  • 0.757 in (4)
  • 0.758 in (4)
  • 0.759 in (5)
  • 0.766 in (5)
  • 0.768 in (8)
  • 0.781 in (7)
  • 0.787 in (8)
  • 0.797 in (6)
  • 0.807 in (8)
  • 0.814 in (6)
  • 0.828 in (8)
  • 0.844 in (4)
  • 0.846 in (8)
  • 0.859 in (4)
  • 0.866 in (8)
  • 0.875 in (6)
  • 0.884 in (5)
  • 0.886 in (8)
  • 0.906 in (8)
  • 0.922 in (5)
  • 0.925 in (8)
  • 0.937 in (6)
  • 0.946 in (8)
  • 0.965 in (8)
  • 0.969 in (5)
  • 0.984 in (8)
  • 1.0 in (7)
  • 1.004 in (8)
  • 1.008 in (5)
  • 1.01 in (4)
  • 1.012 in (6)
  • 1.016 in (4)
  • 1.024 in (8)
  • 1.032 in (7)
  • 1.043 in (8)
  • 1.063 in (8)
  • 1.083 in (7)
  • 1.102 in (8)
  • 1.109 in (4)
  • 1.122 in (8)
  • 1.125 in (6)
  • 1.143 in (8)
  • 1.156 in (5)
  • 1.161 in (8)
  • 1.172 in (4)
  • 1.181 in (8)
  • 1.187 in (4)
  • 1.201 in (8)
  • 1.22 in (8)
  • 1.24 in (5)
  • 1.25 in (7)
  • 1.26 in (8)
  • 1.28 in (5)
  • 1.299 in (7)
  • 1.339 in (8)
  • 1.375 in (4)
  • 1.379 in (8)
  • 1.417 in (8)
  • 1.437 in (5)
  • 1.457 in (6)
  • 1.476 in (6)
  • 1.496 in (8)
  • 1.536 in (8)
  • 1.575 in (8)
Cutting Diameter Insert Min to Cutting Diameter Insert Max
Cutting Diameter Insert
Cutting Diameter Insert
  • 12.5 mm (8)
  • 12.701 mm (6)
  • 12.8 mm (4)
  • 12.925 mm (4)
  • 13.0 mm (8)
  • 13.5 mm (8)
  • 13.8 mm (4)
  • 14.0 mm (8)
  • 14.101 mm (5)
  • 14.3 mm (5)
  • 14.5 mm (8)
  • 14.675 mm (5)
  • 14.8 mm (4)
  • 15.0 mm (8)
  • 15.076 mm (4)
  • 15.5 mm (8)
  • 15.601 mm (4)
  • 15.8 mm (4)
  • 15.875 mm (6)
  • 16.0 mm (8)
  • 16.1 mm (6)
  • 16.2 mm (6)
  • 16.276 mm (6)
  • 16.5 mm (8)
  • 16.675 mm (6)
  • 17.0 mm (8)
  • 17.075 mm (5)
  • 17.45 mm (6)
  • 17.5 mm (8)
  • 17.85 mm (4)
  • 18.0 mm (8)
  • 18.25 mm (5)
  • 18.5 mm (8)
  • 18.651 mm (4)
  • 19.0 mm (8)
  • 19.05 mm (7)
  • 19.225 mm (4)
  • 19.25 mm (4)
  • 19.276 mm (5)
  • 19.451 mm (5)
  • 19.5 mm (8)
  • 19.85 mm (7)
  • 20.0 mm (8)
  • 20.25 mm (6)
  • 20.5 mm (8)
  • 20.651 mm (6)
  • 21.0 mm (8)
  • 21.425 mm (4)
  • 21.5 mm (8)
  • 21.826 mm (4)
  • 22.0 mm (8)
  • 22.225 mm (6)
  • 22.451 mm (5)
  • 22.5 mm (8)
  • 23.0 mm (8)
  • 23.425 mm (5)
  • 23.5 mm (8)
  • 23.8 mm (6)
  • 24.0 mm (8)
  • 24.5 mm (8)
  • 24.6 mm (5)
  • 25.0 mm (8)
  • 25.401 mm (7)
  • 25.5 mm (8)
  • 25.6 mm (5)
  • 25.651 mm (4)
  • 25.675 mm (6)
  • 25.8 mm (4)
  • 26.0 mm (8)
  • 26.201 mm (7)
  • 26.5 mm (8)
  • 27.0 mm (8)
  • 27.5 mm (7)
  • 28.0 mm (8)
  • 28.175 mm (4)
  • 28.5 mm (8)
  • 28.576 mm (6)
  • 29.0 mm (8)
  • 29.375 mm (5)
  • 29.5 mm (8)
  • 29.776 mm (4)
  • 30.0 mm (8)
  • 30.151 mm (4)
  • 30.5 mm (8)
  • 31.0 mm (8)
  • 31.5 mm (5)
  • 31.75 mm (7)
  • 32.0 mm (8)
  • 32.5 mm (5)
  • 33.0 mm (7)
  • 34.0 mm (8)
  • 34.926 mm (4)
  • 35.0 mm (8)
  • 36.0 mm (8)
  • 36.5 mm (5)
  • 37.0 mm (6)
  • 37.5 mm (6)
  • 38.0 mm (8)
  • 39.0 mm (8)
  • 40.0 mm (8)
Cutting Diameter Insert Min to Cutting Diameter Insert Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Modular Drills

Modular Drilling • Carbide Insert for KSEM™
(273 Products)
  • DrillingDrilling
  • Drilling: Inclined ExitDrilling: Inclined Exit
  • Drilling: Stacked PlatesDrilling: Stacked Plates
  • Tool Dimensions: 2flute/2margin/coolantTool Dimensions: 2flute/2margin/coolant
  • Through Coolant: MQL (Minimum Quantity Lubricant): DrillingThrough Coolant: MQL (Minimum Quantity Lubricant): Drilling
  • Drilling - Through CoolantDrilling - Through Coolant
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Drill Diameter [D1] Drill Diameter [L5] Drill Point Length [L5] Drill Point Length [SSC] Insert Seat Size
2449924 KSEM1250HPGM KSEM1250HPGM KC7315   12.5000 .4921 2.2000 .0860 C
    List price:
    $103,15 /each.
    Your price::
    Qty
    2450909 KSEM2000HPGM KSEM2000HPGM KC7315   20.0000 .7874     3
      List price:
      $140,77 /each.
      Your price::
      Qty
      2465988 KSEM2050HPGM KSEM2050HPGM KC7315   20.5000 .8071     3
        List price:
        $146,94 /each.
        Your price::
        Qty
        2449518 KSEM2300HPGM KSEM2300HPGM KC7315   23.0000 .9055 4.0400 .1590 4
          List price:
          $156,88 /each.
          Your price::
          Qty
          2449473 KSEM2600HPGM KSEM2600HPGM KC7315   26.0000 1.023     5