KSEM PLUS™ Inserts

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (93)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (93)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (93)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (93)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (93)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (93)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (84)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (84)
  • M Stainless Steel (92)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (92)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (92)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (78)
  • K Cast Iron (74)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (74)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (74)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (74)
  • N Non-Ferrous Materials (69)
    • N1
      Wrought Aluminum (68)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (68)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (68)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (54)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (63)
    • N6
      Carbon, Graphite Composites, CFRP (54)
    • N7
      MMC's (50)
  • S High-Temp Alloys (78)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (78)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (78)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (78)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (78)
  • H Hardened Materials (5)
    • H1
      Hardened Materials 44-48 HRC (5)
Select First Choice
  • BR (4)
  • CN (88)
  • DE (88)
  • GB (44)
  • IN (15)
  • SG (52)
  • US (88)
Cutting Diameter
Cutting Diameter
  • 0.512 in (1)
  • 0.551 in (1)
  • 0.591 in (1)
  • 0.63 in (1)
  • 0.669 in (1)
  • 0.709 in (1)
  • 0.748 in (1)
  • 0.787 in (1)
  • 0.828 in (1)
  • 0.866 in (1)
  • 0.906 in (1)
  • 0.946 in (1)
  • 0.984 in (1)
  • 1.417 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 13.0 mm (1)
  • 14.0 mm (1)
  • 15.0 mm (1)
  • 16.0 mm (1)
  • 17.0 mm (1)
  • 18.0 mm (1)
  • 19.0 mm (1)
  • 20.0 mm (1)
  • 21.0 mm (1)
  • 22.0 mm (1)
  • 23.0 mm (1)
  • 24.0 mm (1)
  • 25.0 mm (1)
  • 36.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Interrupted (74)
  • Stable (79)
  • Unstable (74)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (14)
  • 2.0 (34)
  • 3.0 (45)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Corner configuration
Corner Radius
Corner Radius
  • 0.016 in (4)
  • 0.031 in (45)
  • 0.039 in (6)
  • 0.047 in (12)
  • 0.063 in (6)
  • 0.079 in (6)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (4)
  • 0.8 mm (45)
  • 1.0 mm (6)
  • 1.201 mm (12)
  • 1.6 mm (6)
  • 2.0 mm (6)
Corner Radius Min to Corner Radius Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC7140 (15)
  • KC7225 (1)
  • KC7315 (14)
  • KCU25 (29)
  • KCU40 (34)
Front-End
Insert Shape
Insert Shape
  • B-PARALLELOGRAM 82 (4)
  • D-DIAMOND/RHOMBIC 90 (30)
  • KSEM DRILL (14)
  • X-TRIGON 84 (45)
Point Angle
Point Angle
  • 140.0 (14)
Point Angle Min to Point Angle Max
Insert Geometry
Shape
Shape
  • B-PARALLELOGRAM 82 (4)
  • D-DIAMOND/RHOMBIC 90 (30)
  • KSEM DRILL (14)
  • X-TRIGON 84 (45)
Insert IC Size
Insert IC Size
  • 8.0 mm (14)
  • 10.0 mm (15)
  • 12.0 mm (10)
  • 15.0 mm (10)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.315 in (14)
  • 0.394 in (15)
  • 0.473 in (10)
  • 0.591 in (10)
Insert IC Size Min to Insert IC Size Max
Insert Seat Size
Insert Seat Size
  • 1 (3)
  • 2 (1)
  • 3 (3)
  • 4 (2)
  • 5 (1)
  • 9 (1)
  • A (1)
  • B (1)
  • C (1)
Cutting Edge Length
Cutting Edge Length
  • 5.301 mm (10)
  • 6.625 mm (15)
  • 7.95 mm (10)
  • 9.925 mm (10)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.209 in (10)
  • 0.261 in (15)
  • 0.313 in (10)
  • 0.391 in (10)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • DS (28)
  • GD (2)
  • HP (28)
  • HPF (5)
  • LD (1)
  • MD (15)
Cutting Diameter Insert
Cutting Diameter Insert
  • 0.512 in (1)
  • 0.551 in (1)
  • 0.591 in (1)
  • 0.63 in (1)
  • 0.669 in (1)
  • 0.709 in (1)
  • 0.748 in (1)
  • 0.787 in (1)
  • 0.828 in (1)
  • 0.866 in (1)
  • 0.906 in (1)
  • 0.946 in (1)
  • 0.984 in (1)
  • 1.417 in (1)
Cutting Diameter Insert Min to Cutting Diameter Insert Max
Cutting Diameter Insert
Cutting Diameter Insert
  • 13.0 mm (1)
  • 14.0 mm (1)
  • 15.0 mm (1)
  • 16.0 mm (1)
  • 17.0 mm (1)
  • 18.0 mm (1)
  • 19.0 mm (1)
  • 20.0 mm (1)
  • 21.0 mm (1)
  • 22.0 mm (1)
  • 23.0 mm (1)
  • 24.0 mm (1)
  • 25.0 mm (1)
  • 36.0 mm (1)
Cutting Diameter Insert Min to Cutting Diameter Insert Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Thank you for your successful registration. You now have immediate access to log in and utilize the site.

You are about to leave the Solution building process.

Are you sure you want to leave?