Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

Reaming Tools

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (288)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (240)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (288)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (288)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (288)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (288)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (288)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (288)
  • M Stainless Steel (287)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (287)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (287)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (287)
  • K Cast Iron (264)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (264)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (264)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (264)
  • N Non-Ferrous Materials (69)
    • N1
      Wrought Aluminum
      (69)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (69)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (69)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (45)
  • S High-Temp Alloys (286)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (286)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (286)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (286)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (286)
Applications
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (178)
  • Blind Hole Finishing Blind Hole Finishing (215)
  • Grooving Grooving (1)
  • ID Thread Turning ID Thread Turning (1)
  • Slot Milling Slot Milling (5)
  • Slot Side Slot Side (5)
  • Slot Square End Slot Square End (5)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (107)
  • Through Hole Finishing Through Hole Finishing (139)
Cutting Diameter
Cutting Diameter
  • 0.197 in (8)
  • 0.217 in (8)
  • 0.237 in (10)
  • 0.25 in (2)
  • 0.256 in (8)
  • 0.276 in (8)
  • 0.313 in (2)
  • 0.315 in (10)
  • 0.354 in (8)
  • 0.375 in (2)
  • 0.394 in (10)
  • 0.433 in (8)
  • 0.438 in (2)
  • 0.473 in (10)
  • 0.5 in (2)
  • 0.512 in (8)
  • 0.551 in (18)
  • 0.564 in (4)
  • 0.591 in (8)
  • 0.625 in (3)
  • 0.63 in (10)
  • 0.669 in (8)
  • 0.689 in (4)
  • 0.709 in (10)
  • 0.743 in (4)
  • 0.748 in (9)
  • 0.75 in (6)
  • 0.787 in (10)
  • 0.828 in (6)
  • 0.866 in (7)
  • 0.875 in (4)
  • 0.876 in (1)
  • 0.906 in (6)
  • 0.939 in (4)
  • 0.946 in (6)
  • 0.984 in (7)
  • 1.0 in (5)
  • 1.024 in (6)
  • 1.063 in (6)
  • 1.102 in (7)
  • 1.125 in (1)
  • 1.143 in (2)
  • 1.181 in (7)
  • 1.22 in (2)
  • 1.25 in (5)
  • 1.26 in (7)
  • 1.299 in (2)
  • 1.339 in (6)
  • 1.379 in (2)
  • 1.417 in (7)
  • 1.438 in (1)
  • 1.457 in (2)
  • 1.496 in (6)
  • 1.536 in (2)
  • 1.563 in (1)
  • 1.575 in (7)
  • 1.614 in (2)
  • 1.653 in (1)
  • 1.655 in (7)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 5.0 mm (8)
  • 5.5 mm (8)
  • 6.0 mm (10)
  • 6.351 mm (2)
  • 6.5 mm (8)
  • 7.0 mm (8)
  • 7.95 mm (2)
  • 8.0 mm (10)
  • 9.0 mm (8)
  • 9.525 mm (2)
  • 10.0 mm (10)
  • 11.0 mm (8)
  • 11.125 mm (2)
  • 12.0 mm (10)
  • 12.701 mm (2)
  • 13.0 mm (8)
  • 14.0 mm (18)
  • 14.3 mm (4)
  • 15.0 mm (8)
  • 15.875 mm (3)
  • 16.0 mm (10)
  • 17.0 mm (8)
  • 17.475 mm (4)
  • 18.0 mm (10)
  • 18.875 mm (4)
  • 19.0 mm (9)
  • 19.05 mm (6)
  • 20.0 mm (10)
  • 21.0 mm (6)
  • 22.0 mm (7)
  • 22.225 mm (4)
  • 22.25 mm (1)
  • 23.0 mm (6)
  • 23.826 mm (4)
  • 24.0 mm (6)
  • 25.0 mm (7)
  • 25.401 mm (5)
  • 26.0 mm (6)
  • 27.0 mm (6)
  • 28.0 mm (7)
  • 28.576 mm (1)
  • 29.0 mm (2)
  • 30.0 mm (7)
  • 31.0 mm (2)
  • 31.75 mm (5)
  • 32.0 mm (7)
  • 33.0 mm (2)
  • 34.0 mm (6)
  • 35.0 mm (2)
  • 36.0 mm (7)
  • 36.525 mm (1)
  • 37.0 mm (2)
  • 38.0 mm (6)
  • 39.0 mm (2)
  • 39.7 mm (1)
  • 40.0 mm (7)
  • 41.0 mm (2)
  • 41.95 mm (1)
  • 42.0 mm (7)
Cutting Diameter Min to Cutting Diameter Max
Reach
Reach
  • 0.968 in (1)
  • 1.01 in (1)
  • 1.045 in (1)
  • 1.969 in (1)
  • 2.045 in (1)
Reach Min to Reach Max
Reach
Reach
  • 24.576 mm (1)
  • 25.625 mm (1)
  • 26.55 mm (1)
  • 50.0 mm (1)
  • 51.95 mm (1)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (5)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Short Taper Reamer Shank (192)
  • Straight-Cylindrical (140)
  • Whistle Notch 2 (3)
Number of Flutes
Number of Flutes
  • 2 (4)
  • 3 (1)
  • 4 (64)
  • 6 (178)
  • 8 (88)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (7)
  • 2.0 (3)
  • 4.0 (66)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.008 in (1)
  • 0.016 in (3)
  • 0.02 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (1)
  • 0.4 mm (3)
  • 0.5 mm (2)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (76)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (76)
Corner Chamfer Min to Corner Chamfer Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K605 (24)
  • KB1610 (2)
  • KBHK10 (5)
  • KBHK15 (5)
  • KC6005 (76)
  • KC6105 (17)
  • KC6305 (97)
  • KCU05 (72)
  • KCU05A (48)
  • KCU45 (7)
  • KD1415 (49)
  • KT6215 (1)
  • KT6225 (1)
  • KT6315 (2)
Hand Of Tool
Hand Of Tool
  • R (335)
Wiper Insert
Wiper Insert
  • N (71)
Helix Hand
Helix Hand
  • L (118)
  • N (187)
  • R (25)
Lead in Length
Lead in Length
  • 0.2 mm (45)
  • 0.301 mm (6)
  • 0.4 mm (26)
  • 0.5 mm (110)
  • 0.601 mm (12)
  • 0.701 mm (5)
  • 0.75 mm (6)
  • 0.8 mm (3)
  • 0.9 mm (4)
  • 0.951 mm (10)
  • 1.1 mm (95)
  • 1.151 mm (8)
Lead in Length Min to Lead in Length Max
Lead In Length
Lead In Length
  • 0.0 in (51)
  • 0.001 in (165)
  • 0.002 in (113)
  • 0.038 in (1)
Lead In Length Min to Lead In Length Max
Front-End
Cutting Width
Cutting Width
  • 0.119 in (1)
  • 0.125 in (1)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 3.0 mm (1)
  • 3.176 mm (1)
Cutting Width Min to Cutting Width Max
Insert Shape
Insert Shape
  • GROOVING/CUTOFF MISC (7)
  • L-RECTANGLE 90 (3)
  • S-SQUARE 90 (66)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.039 in (5)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 1.0 mm (5)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Gage Length
Gage Length
  • 1.969 in (1)
  • 2.362 in (4)
  • 2.402 in (1)
  • 2.48 in (4)
  • 2.598 in (2)
  • 2.677 in (1)
  • 2.757 in (1)
  • 3.543 in (3)
  • 3.583 in (1)
  • 3.898 in (1)
  • 3.938 in (5)
  • 4.094 in (1)
  • 4.173 in (1)
  • 4.469 in (2)
  • 4.529 in (1)
  • 4.843 in (1)
  • 5.021 in (1)
  • 5.138 in (2)
  • 5.315 in (1)
  • 5.748 in (1)
  • 6.005 in (2)
  • 6.083 in (1)
  • 6.24 in (2)
  • 6.851 in (2)
  • 7.303 in (2)
  • 7.48 in (2)
  • 8.563 in (2)
  • 9.803 in (2)
  • 10.787 in (2)
Gage Length
Gage Length
  • 100 mm (5)
  • 60 mm (4)
  • 63 mm (4)
  • 90 mm (3)
  • 174 mm (2)
  • 190 mm (2)
  • 249 mm (2)
  • 274 mm (2)
  • 66 mm (2)
  • 104 mm (1)
  • 106 mm (1)
  • 115 mm (1)
  • 123 mm (1)
  • 135 mm (1)
  • 146 mm (1)
  • 50 mm (1)
  • 61 mm (1)
  • 68 mm (1)
  • 70 mm (1)
  • 91 mm (1)
  • 99 mm (1)
  • 113.5 mm (2)
  • 127.5 mm (1)
  • 130.5 mm (2)
  • 152.5 mm (2)
  • 154.5 mm (1)
  • 158.5 mm (2)
  • 185.5 mm (2)
  • 217.5 mm (2)
Center Cutting
Center Cutting
Insert Geometry
Shape
Shape
  • GROOVING/CUTOFF MISC (2)
  • L-RECTANGLE 90 (3)
  • S-SQUARE 90 (66)
Insert IC Size
Insert IC Size
  • 6.0 mm (31)
  • 6.5 mm (2)
  • 7.0 mm (2)
  • 8.0 mm (2)
  • 9.0 mm (29)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.237 in (31)
  • 0.256 in (2)
  • 0.276 in (2)
  • 0.315 in (2)
  • 0.354 in (29)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 6.0 mm (5)
  • 6.5 mm (2)
  • 7.0 mm (2)
  • 8.0 mm (2)
  • 9.0 mm (4)
  • 9.05 mm (1)
  • 14.476 mm (1)
  • 27.0 mm (1)
  • 45.0 mm (1)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.237 in (5)
  • 0.256 in (2)
  • 0.276 in (2)
  • 0.315 in (2)
  • 0.354 in (4)
  • 0.356 in (1)
  • 0.571 in (1)
  • 1.063 in (1)
  • 1.772 in (1)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • FB (1)
  • FT (2)
  • S (10)
Cutting Tool Material
Cutting Tool Material
  • B H (12)
  • D P (4)
  • H T (3)
  • H W (52)
Back-End
Connection Type
Connection Type
  • CYLINDRICAL (143)
  • SHORT TAPER (192)
System Size
System Size
  • BT40 (1)
  • BT50 (2)
  • CV40 (1)
  • CV50 (2)
  • DV40 (1)
  • DV50 (2)
  • HSK100A (2)
  • HSK63A (2)
  • HSK80A (1)
  • SIF100 (3)
  • SIF70 (6)
  • SIF80 (3)
Back-End Diameter
Back-End Diameter
  • 6.0 mm (26)
  • 6.351 mm (2)
  • 7.95 mm (2)
  • 8.0 mm (26)
  • 9.525 mm (2)
  • 10.0 mm (18)
  • 11.101 mm (2)
  • 11.5 mm (16)
  • 12.0 mm (18)
  • 12.701 mm (2)
  • 13.5 mm (16)
  • 14.0 mm (18)
  • 15.5 mm (17)
  • 15.875 mm (2)
  • 16.0 mm (6)
  • 17.5 mm (26)
  • 18.0 mm (2)
  • 19.05 mm (3)
  • 20.0 mm (54)
  • 25.0 mm (31)
  • 30.0 mm (20)
  • 35.0 mm (26)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.237 in (26)
  • 0.25 in (2)
  • 0.313 in (2)
  • 0.315 in (26)
  • 0.375 in (2)
  • 0.394 in (18)
  • 0.437 in (2)
  • 0.453 in (16)
  • 0.473 in (18)
  • 0.5 in (2)
  • 0.531 in (16)
  • 0.551 in (18)
  • 0.61 in (17)
  • 0.625 in (2)
  • 0.63 in (6)
  • 0.69 in (26)
  • 0.709 in (2)
  • 0.75 in (3)
  • 0.787 in (54)
  • 0.984 in (31)
  • 1.181 in (20)
  • 1.379 in (26)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Modular Reaming Bodies

Straight Shank Bodies 5 x D • Axial Clamping
(8 Products)
  • Shank - Cylindrical  Plain ≤h6Shank - Cylindrical Plain ≤h6
  • Coolant - Through CoolantCoolant - Through Coolant
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [CSWS] System Size Workpiece Side [D1] Adapter / Shank / Bore Diameter [D1] Adapter / Shank / Bore Diameter [D1MAX] Maximum Adaptor/Bore Diameter [D1MAX] Maximum Adaptor/Bore Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Usable Length [L2] Usable Length [LS] Shank Length [LS] Shank Length
4056177 SS16KST115AR5M SS16KST115AR5M KST115 14.0000 .5510 15.9990 .6300 16.0 .63 123.0000 4.843 67.0000 2.640 48.0 1.89
    List price:
    $405,35 /each.
    Your price::
    Qty
    3861190 SS20KST175AR5M SS20KST175AR5M KST175 20.0000 .7870 22.4990 .8858 20.0 .7874 158.5000 6.240 96.5000 3.799 51.0 2.007
      List price:
      $457,81 /each.
      Your price::
      Qty
      3861191 SS20KST200AR5M SS20KST200AR5M KST200 22.5000 .8860 27.4990 1.082 20.0 .7874 185.5000 7.303 120.5000 4.744 51.0 2.007
        List price:
        $476,04 /each.
        Your price::
        Qty
        3861192 SS25KST250AR5M SS25KST250AR5M KST250 27.5000 1.083 32.4990 1.279 25.0 .9843 217.5000 8.563 145.5000 5.728 56.0 2.204
          List price:
          $503,58 /each.
          Your price::
          Qty
          3861193 SS32KST300AR5M SS32KST300AR5M KST300 32.5000 1.280 37.4990 1.476 32.0 1.259 249.0000 9.803 169.0000 6.654 61.0 2.401
            List price:
            $567,59 /each.
            Your price::
            Qty
            3861194 SS32KST350AR5M SS32KST350AR5M KST350 37.5000 1.476 42.0000 1.653 32.0 1.259 274.0000 10.787 192.0000 7.559 61.0 2.401
              List price:
              $686,70 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Modular Reaming Bodies

              Straight Shank Bodies 5 x D • Radial Clamping
              (5 Products)
              • Shank - Cylindrical  Plain ≤h6Shank - Cylindrical Plain ≤h6
              • Coolant - Through CoolantCoolant - Through Coolant
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [CSWS] System Size Workpiece Side [D1] Adapter / Shank / Bore Diameter [D1] Adapter / Shank / Bore Diameter [D1MAX] Maximum Adaptor/Bore Diameter [D1MAX] Maximum Adaptor/Bore Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Usable Length [L2] Usable Length [LS] Shank Length [LS] Shank Length
              3861200 SS20KST175RR5M SS20KST175RR5M KST175 20.0000 .7870 22.4990 .8858 20.0 .787 158.5000 6.240 96.5000 3.799 51.0 2.008
                List price:
                $618,02 /each.
                Your price::
                Qty
                3861201 SS20KST200RR5M SS20KST200RR5M KST200 22.5000 .8860 27.4990 1.082 20.0 .787 185.5000 7.303 120.5000 4.744 51.0 2.008
                  List price:
                  $642,84 /each.
                  Your price::
                  Qty
                  3861202 SS25KST250RR5M SS25KST250RR5M KST250 27.5000 1.083 32.4990 1.279 25.0 .984 217.5000 8.563 145.5000 5.728 56.0 2.205
                    List price:
                    $679,92 /each.
                    Your price::
                    Qty
                    3861203 SS32KST300RR5M SS32KST300RR5M KST300 32.5000 1.280 37.4990 1.476 32.0 1.259 249.0000 9.803 169.0000 6.654 61.0 2.402
                      List price:
                      $766,41 /each.
                      Your price::
                      Qty
                      3861204 SS32KST350RR5M SS32KST350RR5M KST350 37.5000 1.476 42.0000 1.653 32.0 1.259 274.0000 10.787 192.0000 7.559 61.0 2.402
                        List price:
                        $927,04 /each.
                        Your price::
                        Qty
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is no longer available
                        Replacement Product Please contact customer service for assistance
                        Qty

                        Sold in pkg. of

                        ORIGINAL PRODUCT

                        Modular Reaming Bodies

                        Straight Shank Bodies 3 x D • Radial Clamping
                        (5 Products)
                        • Shank - Cylindrical  Plain ≤h6Shank - Cylindrical Plain ≤h6
                        • Coolant - Through CoolantCoolant - Through Coolant
                        View Products
                        SAP Material Number ISO Catalog Number ANSI Catalog Number [CSWS] System Size Workpiece Side [D1] Adapter / Shank / Bore Diameter [D1] Adapter / Shank / Bore Diameter [D1MAX] Maximum Adaptor/Bore Diameter [D1MAX] Maximum Adaptor/Bore Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Usable Length [L2] Usable Length [LS] Shank Length [LS] Shank Length
                        3861195 SS20KST175RR3M SS20KST175RR3M KST175 20.0000 .7870 22.4990 .8858 20.0 .7874 113.5000 4.469 51.5000 2.028 51.0 2.008
                          List price:
                          $572,25 /each.
                          Your price::
                          Qty
                          3861196 SS20KST200RR3M SS20KST200RR3M KST200 22.5000 .8860 27.4990 1.082 20.0 .787 130.5000 5.138 65.5000 2.579 51.0 2.008
                            List price:
                            $595,17 /each.
                            Your price::
                            Qty
                            3861197 SS25KST250RR3M SS25KST250RR3M KST250 27.5000 1.083 32.4990 1.279 25.0 .984 152.5000 6.004 80.5000 3.169 56.0 2.205
                              List price:
                              $629,47 /each.
                              Your price::
                              Qty
                              3861198 SS32KST300RR3M SS32KST300RR3M KST300 32.5000 1.280 37.4990 1.476 32.0 1.259 174.0000 6.850 94.0000 3.701 61.0 2.402
                                List price:
                                $709,60 /each.
                                Your price::
                                Qty
                                3861199 SS32KST350RR3M SS32KST350RR3M KST350 37.5000 1.476 42.0000 1.653 32.0 1.259 190.0000 7.480 108.0000 4.252 61.0 2.402
                                  List price:
                                  $858,40 /each.
                                  Your price::
                                  Qty