eBore™ Universal

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (27)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(27)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(27)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(27)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(27)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(27)
    • M Stainless Steel (27)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(27)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(27)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(27)
    • K Cast Iron (23)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(23)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(23)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(23)
    • N Non-Ferrous Materials (23)
      • N1
        Wrought Aluminum (23)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(23)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(23)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (23)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (23)
      • N6
        Carbon, Graphite Composites, CFRP (23)
      • N7
        MMC's (23)
    • S High-Temp Alloys (27)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(27)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(27)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(27)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(27)
    • H Hardened Materials (23)
      • H1
        Hardened Materials 44-48 HRC(23)
      • H2
        Hardened Materials 48-55 HRC(23)
      • H3
        Hardened Materials 56-60 HRC(23)
      • H4
        Hardened Materials >60 HRC(23)
    • C CFRP Materials (23)
      • C1
        CFRP, CFRP / CFRP (23)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (23)
    Applications
    Applications
    • Blind & Cross Hole FinishingBlind & Cross Hole Finishing (17)
    • Blind Hole FinishingBlind Hole Finishing (17)
    • Through & Cross Hole FinishingThrough & Cross Hole Finishing (17)
    • Through Hole FinishingThrough Hole Finishing (17)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (23)
    • Lightly Interrupted Cut (27)
    • Smooth Cut (27)
    • Varying Depth of Cut (27)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 91.0 (4)
    • 92.0 (23)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • E-BORE Boring Bar (21)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (17)
    • 2.0 (17)
    • 3.0 (4)
    • 4.0 (17)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 0.65 in(2)
    • 0.669 in(3)
    • 1.772 in(1)
    • 1.891 in(1)
    • 2.086 in(1)
    • 2.087 in(1)
    • 2.165 in(1)
    • 2.265 in(1)
    • 2.282 in(2)
    • 2.479 in(1)
    • 2.676 in(1)
    • 2.677 in(1)
    • 2.873 in(1)
    • 3.071 in(1)
    • 3.269 in(1)
    • 3.661 in(2)
    • 3.858 in(2)
    • 4.449 in(2)
    • 4.843 in(1)
    • 5.63 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 16.5 mm(2)
    • 17.0 mm(3)
    • 45.0 mm(1)
    • 48.0 mm(1)
    • 52.975 mm(1)
    • 53.0 mm(1)
    • 55.0 mm(1)
    • 57.5 mm(1)
    • 57.975 mm(2)
    • 62.975 mm(1)
    • 67.976 mm(1)
    • 68.0 mm(1)
    • 72.976 mm(1)
    • 78.0 mm(1)
    • 83.0 mm(1)
    • 93.0 mm(2)
    • 98.0 mm(2)
    • 113.0 mm(2)
    • 123.0 mm(1)
    • 143.0 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.001 in(23)
    • 0.002 in(23)
    • 0.004 in(27)
    • 0.008 in(23)
    • 0.016 in(23)
    • 0.031 in(23)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.025 mm(23)
    • 0.05 mm(23)
    • 0.1 mm(27)
    • 0.2 mm(23)
    • 0.4 mm(23)
    • 0.8 mm(23)
    Corner Radius MintoCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(6)
    Corner Chamfer MintoCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(6)
    Corner Chamfer MintoCorner Chamfer Max
    Application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • HCK10 (23)
    • HK1500 (23)
    • HK35 (23)
    • HT2 (23)
    • HTX (23)
    • HWK15 (23)
    • K10M (23)
    • K10P (23)
    • K10U (23)
    • K15U (23)
    • K20K (23)
    • K25M (23)
    • K313 (23)
    • K68 (23)
    • KB1610 (23)
    • KB1630 (23)
    • KB5610 (23)
    • KB5625 (23)
    • KB5630 (23)
    • KB9610 (23)
    • KBH10 (23)
    • KBH20 (23)
    • KC5010 (23)
    • KC5025 (23)
    • KC5410 (23)
    • KC720 (23)
    • KC730 (23)
    • KC732 (23)
    • KC8050 (23)
    • KC810 (23)
    • KC850 (23)
    • KC9010 (23)
    • KC9025 (23)
    • KC910 (23)
    • KC9105 (23)
    • KC9110 (23)
    • KC9120 (23)
    • KC9125 (23)
    • KC9225 (23)
    • KC9240 (23)
    • KC9240NEW (23)
    • KC9315 (23)
    • KC9320 (23)
    • KC9325 (23)
    • KC935 (23)
    • KC950 (23)
    • KC990 (23)
    • KCD25 (23)
    • KCK05 (23)
    • KCK05B (23)
    • KCK15 (23)
    • KCK15B (23)
    • KCK20 (23)
    • KCK20B (23)
    • KCM15 (23)
    • KCM15B (23)
    • KCM25 (23)
    • KCM25B (23)
    • KCM25S (23)
    • KCM35 (23)
    • KCP05 (23)
    • KCP10 (23)
    • KCP10B (23)
    • KCP20S (23)
    • KCP25 (23)
    • KCP25B (23)
    • KCP25C (23)
    • KCP30 (23)
    • KCS10 (23)
    • KCS10B (23)
    • KCS25S (23)
    • KCU10 (27)
    • KCU10B (23)
    • KCU25 (23)
    • KCU25B (23)
    • KD050 (23)
    • KD081 (23)
    • KD1400 (23)
    • KD1425 (23)
    • KN10S (23)
    • KT175 (23)
    • KT315 (23)
    • KT325 (23)
    • KTP10 (23)
    • KTP25S (23)
    • KU10 (23)
    • KU10T (23)
    • KU30T (23)
    • PB100 (23)
    • PB170 (23)
    • PB250 (23)
    • PB300 (23)
    • PD100 (23)
    • PD50 (23)
    • THM (23)
    • THM-X (23)
    • TN1000 (23)
    • TN10P (23)
    • TN10U (23)
    • TN15M (23)
    • TN15U (23)
    • TN2000 (23)
    • TN20K (23)
    • TN20P (23)
    • TN30M (23)
    • TN4000 (23)
    • TN5015 (23)
    • TN5020 (23)
    • TN5105 (23)
    • TN5120 (23)
    • TN7010 (23)
    • TN7015 (23)
    • TN7025 (23)
    • TN7035 (23)
    • TN7105 (23)
    • TN7110 (23)
    • TN7115 (23)
    • TN7125 (23)
    • TN7135 (23)
    • TN8025 (23)
    • TTI15 (23)
    • TTR (23)
    • TTS (23)
    • WBH10C (23)
    • WBH10P (23)
    • WBH10U (23)
    • WBH25P (23)
    • WDN00U (23)
    • WDN25U (23)
    • WK05CT (23)
    • WK15CT (23)
    • WK20CT (23)
    • WM15CT (23)
    • WM25CT (23)
    • WP15CT (23)
    • WP20TT (23)
    • WP25CT (23)
    • WS10PT (23)
    • WS25PT (23)
    • WU05PT (23)
    • WU10HT (23)
    • WU10PR (4)
    • WU10PT (23)
    • WU20HT (23)
    • WU25PT (23)
    Hand Of Tool
    Hand Of Tool
    • R (21)
    Wiper Insert
    Wiper Insert
    • N (21)
    F Dimension
    F Dimension
    • 0.151 mm(1)
    • 2.825 mm(2)
    • 3.825 mm(1)
    • 4.75 mm(1)
    • 4.775 mm(3)
    • 5.75 mm(2)
    • 5.775 mm(1)
    • 6.75 mm(2)
    • 6.775 mm(2)
    • 7.325 mm(1)
    • 7.75 mm(1)
    • 7.775 mm(2)
    • 9.775 mm(1)
    • 12.275 mm(1)
    F Dimension MintoF Dimension Max
    F Dimension
    F Dimension
    • 0.006 in(1)
    • 0.111 in(2)
    • 0.151 in(1)
    • 0.187 in(1)
    • 0.188 in(3)
    • 0.226 in(2)
    • 0.227 in(1)
    • 0.266 in(2)
    • 0.267 in(2)
    • 0.289 in(1)
    • 0.305 in(1)
    • 0.306 in(2)
    • 0.385 in(1)
    • 0.483 in(1)
    F Dimension MintoF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 2.0 mm(1)
    • 6.0 mm(2)
    • 8.0 mm(2)
    • 10.0 mm(4)
    • 12.0 mm(3)
    • 14.0 mm(4)
    • 15.0 mm(1)
    • 16.0 mm(3)
    • 20.0 mm(1)
    • 25.0 mm(1)
    • 29.0 mm(1)
    • 40.0 mm(1)
    • 52.0 mm(1)
    • 68.0 mm(1)
    • 76.0 mm(1)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.079 in(1)
    • 0.237 in(2)
    • 0.315 in(2)
    • 0.394 in(4)
    • 0.473 in(3)
    • 0.551 in(4)
    • 0.591 in(1)
    • 0.63 in(3)
    • 0.787 in(1)
    • 0.984 in(1)
    • 1.143 in(1)
    • 1.575 in(1)
    • 2.047 in(1)
    • 2.677 in(1)
    • 2.992 in(1)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 0.315 in(2)
    • 0.394 in(2)
    • 0.473 in(4)
    • 0.551 in(3)
    • 0.63 in(4)
    • 0.787 in(4)
    • 0.984 in(1)
    • 1.181 in(1)
    • 1.614 in(1)
    • 2.087 in(1)
    • 2.283 in(1)
    • 3.031 in(1)
    • 4.016 in(1)
    • 5.984 in(1)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 8.0 mm(2)
    • 10.0 mm(2)
    • 12.0 mm(4)
    • 14.0 mm(3)
    • 16.0 mm(4)
    • 20.0 mm(4)
    • 25.0 mm(1)
    • 30.0 mm(1)
    • 41.0 mm(1)
    • 53.0 mm(1)
    • 58.0 mm(1)
    • 77.0 mm(1)
    • 102.0 mm(1)
    • 152.0 mm(1)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • E (21)
    Rake Angle Style
    Rake Angle Style
    • NEGATIVE-ZERO (21)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.787 in(1)
    • 0.906 in(1)
    • 1.102 in(1)
    • 1.104 in(1)
    • 1.181 in(1)
    • 1.298 in(1)
    • 1.338 in(1)
    • 1.574 in(1)
    • 1.693 in(1)
    • 1.695 in(1)
    • 1.907 in(1)
    • 2.165 in(1)
    • 2.277 in(1)
    • 2.757 in(2)
    • 2.953 in(2)
    • 3.543 in(2)
    • 3.938 in(1)
    • 4.724 in(1)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 20.0 mm(1)
    • 23.0 mm(1)
    • 28.0 mm(1)
    • 28.05 mm(1)
    • 30.0 mm(1)
    • 32.975 mm(1)
    • 33.975 mm(1)
    • 39.975 mm(1)
    • 43.0 mm(1)
    • 43.051 mm(1)
    • 48.426 mm(1)
    • 55.0 mm(1)
    • 57.825 mm(1)
    • 70.0 mm(2)
    • 75.0 mm(2)
    • 90.0 mm(2)
    • 100.0 mm(1)
    • 120.0 mm(1)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (21)
    Front-End
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (23)
    • W-TRIGON 80 (4)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.157 in(2)
    • 0.197 in(2)
    • 0.237 in(4)
    • 0.276 in(3)
    • 0.315 in(4)
    • 0.394 in(4)
    • 0.492 in(1)
    • 0.591 in(1)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 4.0 mm(2)
    • 5.0 mm(2)
    • 6.0 mm(4)
    • 7.0 mm(3)
    • 8.0 mm(4)
    • 10.0 mm(4)
    • 12.5 mm(1)
    • 15.0 mm(1)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Gage Length
    Gage Length
    • 0.63 in(3)
    • 1.891 in(1)
    • 2.677 in(1)
    • 3.307 in(1)
    • 3.938 in(1)
    Gage Length
    Gage Length
    • 16 mm(3)
    • 100 mm(1)
    • 48 mm(1)
    • 68 mm(1)
    • 84 mm(1)
    Insert Geometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (23)
    • B L (23)
    • C N (23)
    • D P (23)
    • H T (23)
    • H W (23)
    Back-End
    System Size
    System Size
    • HSK63A (1)
    • KM50TS (1)
    Back-End Diameter
    Back-End Diameter
    • 16.0 mm(28)
    • 50.0 mm(1)
    • 63.0 mm(1)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.63 in(28)
    • 1.969 in(1)
    • 2.48 in(1)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?