TX Drills • Close Tolerance Holes

Designed specifically for challenging drilling operations, the TX solid carbide drill meets the demands for close tolerance holemaking. The TX drills feature an X-shaped free-cutting 130°-point design providing excellent centering ability. The two cutting edges with straight flutes can cut precisions hole shapes even if used as a platform for complex step drills. TX drill provides excellent centering ability, long tool life, and can run into cored holes. Used for holemaking in cast iron, non-ferrous, and aluminum.

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • K Cast Iron (95)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (95)
  • N Non-Ferrous Materials (95)
    • N1
      Wrought Aluminum (95)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (95)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (95)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (95)
Applications
Applications
  • Cross Hole Drilling Cross Hole Drilling (95)
  • Drilling Drilling (95)
  • Inclined Entry Drilling Inclined Entry Drilling (95)
  • Inclined Exit Drilling Inclined Exit Drilling (95)
  • Stacked Plates Drilling Stacked Plates Drilling (95)
Cutting Diameter
Cutting Diameter
  • 0.125 in (1)
  • 0.126 in (1)
  • 0.13 in (1)
  • 0.142 in (1)
  • 0.15 in (1)
  • 0.156 in (1)
  • 0.157 in (1)
  • 0.165 in (1)
  • 0.173 in (1)
  • 0.177 in (1)
  • 0.181 in (1)
  • 0.183 in (1)
  • 0.187 in (1)
  • 0.189 in (1)
  • 0.193 in (1)
  • 0.197 in (1)
  • 0.201 in (1)
  • 0.203 in (1)
  • 0.206 in (1)
  • 0.217 in (1)
  • 0.219 in (2)
  • 0.221 in (1)
  • 0.228 in (1)
  • 0.234 in (1)
  • 0.237 in (1)
  • 0.24 in (1)
  • 0.248 in (1)
  • 0.25 in (1)
  • 0.252 in (1)
  • 0.256 in (1)
  • 0.26 in (1)
  • 0.268 in (1)
  • 0.276 in (1)
  • 0.281 in (1)
  • 0.291 in (1)
  • 0.295 in (1)
  • 0.307 in (1)
  • 0.313 in (1)
  • 0.315 in (1)
  • 0.328 in (1)
  • 0.331 in (1)
  • 0.335 in (1)
  • 0.343 in (1)
  • 0.345 in (1)
  • 0.347 in (1)
  • 0.354 in (1)
  • 0.359 in (1)
  • 0.366 in (1)
  • 0.374 in (1)
  • 0.375 in (1)
  • 0.386 in (1)
  • 0.391 in (1)
  • 0.394 in (1)
  • 0.402 in (1)
  • 0.408 in (1)
  • 0.414 in (1)
  • 0.422 in (1)
  • 0.433 in (1)
  • 0.437 in (1)
  • 0.441 in (1)
  • 0.453 in (2)
  • 0.465 in (1)
  • 0.473 in (1)
  • 0.484 in (1)
  • 0.492 in (1)
  • 0.5 in (1)
  • 0.512 in (1)
  • 0.516 in (1)
  • 0.531 in (2)
  • 0.543 in (1)
  • 0.551 in (1)
  • 0.564 in (1)
  • 0.572 in (1)
  • 0.578 in (1)
  • 0.591 in (1)
  • 0.61 in (1)
  • 0.625 in (1)
  • 0.63 in (1)
  • 0.65 in (1)
  • 0.669 in (1)
  • 0.689 in (1)
  • 0.69 in (1)
  • 0.709 in (1)
  • 0.748 in (1)
  • 0.75 in (1)
  • 0.768 in (1)
  • 0.787 in (1)
  • 0.828 in (1)
  • 0.866 in (1)
  • 0.906 in (1)
  • 0.946 in (1)
  • 0.984 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 3.176 mm (1)
  • 3.2 mm (1)
  • 3.301 mm (1)
  • 3.575 mm (1)
  • 3.801 mm (1)
  • 3.975 mm (1)
  • 4.0 mm (1)
  • 4.2 mm (1)
  • 4.375 mm (1)
  • 4.5 mm (1)
  • 4.601 mm (1)
  • 4.65 mm (1)
  • 4.75 mm (1)
  • 4.801 mm (1)
  • 4.9 mm (1)
  • 5.0 mm (1)
  • 5.101 mm (1)
  • 5.15 mm (1)
  • 5.2 mm (1)
  • 5.5 mm (1)
  • 5.551 mm (2)
  • 5.601 mm (1)
  • 5.801 mm (1)
  • 5.95 mm (1)
  • 6.0 mm (1)
  • 6.101 mm (1)
  • 6.301 mm (1)
  • 6.351 mm (1)
  • 6.4 mm (1)
  • 6.5 mm (1)
  • 6.601 mm (1)
  • 6.801 mm (1)
  • 7.0 mm (1)
  • 7.15 mm (1)
  • 7.4 mm (1)
  • 7.5 mm (1)
  • 7.801 mm (1)
  • 7.95 mm (1)
  • 8.0 mm (1)
  • 8.326 mm (1)
  • 8.4 mm (1)
  • 8.5 mm (1)
  • 8.701 mm (1)
  • 8.725 mm (1)
  • 8.8 mm (1)
  • 9.0 mm (1)
  • 9.125 mm (1)
  • 9.3 mm (1)
  • 9.5 mm (1)
  • 9.525 mm (1)
  • 9.8 mm (1)
  • 9.925 mm (1)
  • 10.0 mm (1)
  • 10.201 mm (1)
  • 10.326 mm (1)
  • 10.5 mm (1)
  • 10.726 mm (1)
  • 11.0 mm (1)
  • 11.101 mm (1)
  • 11.201 mm (1)
  • 11.5 mm (2)
  • 11.8 mm (1)
  • 12.0 mm (1)
  • 12.3 mm (1)
  • 12.5 mm (1)
  • 12.701 mm (1)
  • 13.0 mm (1)
  • 13.101 mm (1)
  • 13.5 mm (2)
  • 13.8 mm (1)
  • 14.0 mm (1)
  • 14.3 mm (1)
  • 14.5 mm (1)
  • 14.675 mm (1)
  • 15.0 mm (1)
  • 15.5 mm (1)
  • 15.875 mm (1)
  • 16.0 mm (1)
  • 16.5 mm (1)
  • 17.0 mm (1)
  • 17.475 mm (1)
  • 17.5 mm (1)
  • 18.0 mm (1)
  • 19.0 mm (1)
  • 19.05 mm (1)
  • 19.5 mm (1)
  • 20.0 mm (1)
  • 21.0 mm (1)
  • 22.0 mm (1)
  • 23.0 mm (1)
  • 24.0 mm (1)
  • 25.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 21.401 mm (3)
  • 23.0 mm (2)
  • 28.6 mm (2)
  • 29.0 mm (6)
  • 34.9 mm (4)
  • 35.0 mm (10)
  • 40.301 mm (1)
  • 43.0 mm (11)
  • 48.7 mm (4)
  • 49.0 mm (9)
  • 53.1 mm (4)
  • 55.6 mm (3)
  • 56.0 mm (7)
  • 60.0 mm (8)
  • 63.0 mm (4)
  • 64.5 mm (2)
  • 71.0 mm (4)
  • 73.0 mm (1)
  • 74.5 mm (1)
  • 77.0 mm (3)
  • 81.2 mm (1)
  • 85.0 mm (2)
  • 98.0 mm (3)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.843 in (3)
  • 0.906 in (2)
  • 1.127 in (2)
  • 1.143 in (6)
  • 1.374 in (4)
  • 1.379 in (10)
  • 1.587 in (1)
  • 1.693 in (11)
  • 1.917 in (4)
  • 1.929 in (9)
  • 2.091 in (4)
  • 2.189 in (3)
  • 2.205 in (7)
  • 2.362 in (8)
  • 2.48 in (4)
  • 2.539 in (2)
  • 2.795 in (4)
  • 2.874 in (1)
  • 2.934 in (1)
  • 3.031 in (3)
  • 3.197 in (1)
  • 3.346 in (2)
  • 3.858 in (3)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 1.083 in (3)
  • 1.102 in (2)
  • 1.399 in (2)
  • 1.417 in (6)
  • 1.713 in (4)
  • 1.732 in (10)
  • 1.988 in (1)
  • 2.087 in (11)
  • 2.382 in (4)
  • 2.402 in (9)
  • 2.618 in (4)
  • 2.777 in (3)
  • 2.795 in (7)
  • 3.012 in (3)
  • 3.031 in (5)
  • 3.248 in (2)
  • 3.269 in (4)
  • 3.642 in (1)
  • 3.661 in (4)
  • 3.761 in (1)
  • 3.976 in (4)
  • 4.488 in (2)
  • 4.961 in (3)
Reach Min to Reach Max
Reach
Reach
  • 27.5 mm (3)
  • 28.0 mm (2)
  • 35.5 mm (2)
  • 36.0 mm (6)
  • 43.5 mm (4)
  • 44.0 mm (10)
  • 50.5 mm (1)
  • 53.0 mm (11)
  • 60.5 mm (4)
  • 61.0 mm (9)
  • 66.5 mm (4)
  • 70.5 mm (3)
  • 71.0 mm (7)
  • 76.5 mm (3)
  • 77.0 mm (5)
  • 82.5 mm (2)
  • 83.0 mm (4)
  • 92.5 mm (1)
  • 93.0 mm (4)
  • 95.5 mm (1)
  • 101.0 mm (4)
  • 114.0 mm (2)
  • 126.0 mm (3)
Reach Min to Reach Max
Over All Length [L]
Over All Length [L]
  • 2.598 in (5)
  • 2.914 in (8)
  • 3.228 in (14)
  • 3.583 in (12)
  • 4.055 in (13)
  • 4.37 in (4)
  • 4.646 in (10)
  • 4.882 in (8)
  • 5.236 in (6)
  • 5.63 in (5)
  • 5.827 in (1)
  • 6.024 in (4)
  • 6.575 in (2)
  • 7.244 in (3)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 66.0 mm (5)
  • 74.0 mm (8)
  • 82.0 mm (14)
  • 91.0 mm (12)
  • 103.0 mm (13)
  • 111.0 mm (4)
  • 118.0 mm (10)
  • 124.0 mm (8)
  • 133.0 mm (6)
  • 143.0 mm (5)
  • 148.0 mm (1)
  • 153.0 mm (4)
  • 167.0 mm (2)
  • 184.0 mm (3)
Over All Length [L] Min to Over All Length [L] Max
Back-End
Back-End Diameter
Back-End Diameter
  • 4.775 mm (5)
  • 6.0 mm (18)
  • 6.351 mm (4)
  • 7.95 mm (2)
  • 8.0 mm (11)
  • 9.525 mm (4)
  • 10.0 mm (9)
  • 11.125 mm (4)
  • 12.0 mm (7)
  • 12.701 mm (3)
  • 14.0 mm (5)
  • 14.3 mm (3)
  • 15.875 mm (2)
  • 16.0 mm (4)
  • 17.475 mm (1)
  • 18.0 mm (4)
  • 19.05 mm (1)
  • 20.0 mm (5)
  • 25.0 mm (3)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.188 in (5)
  • 0.237 in (18)
  • 0.25 in (4)
  • 0.313 in (2)
  • 0.315 in (11)
  • 0.375 in (4)
  • 0.394 in (9)
  • 0.438 in (4)
  • 0.473 in (7)
  • 0.5 in (3)
  • 0.551 in (5)
  • 0.564 in (3)
  • 0.625 in (2)
  • 0.63 in (4)
  • 0.689 in (1)
  • 0.709 in (4)
  • 0.75 in (1)
  • 0.787 in (5)
  • 0.984 in (3)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?