Ceramic Mills • RP

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (28)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (28)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (28)
  • M Stainless Steel (23)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (23)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (23)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (23)
  • K Cast Iron (1)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (1)
  • N Non-Ferrous Materials (1)
    • N1
      Wrought Aluminum (1)
  • S High-Temp Alloys (34)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (33)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (34)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (34)
  • H Hardened Materials (24)
    • H1
      Hardened Materials 44-48 HRC (24)
Applications
Applications
  • Face Milling Face Milling (22)
  • Pocket Pocket (23)
  • Pocket Milling Pocket Milling (23)
  • Profile Milling Profile Milling (18)
  • Ramping Ramping (23)
  • Shoulder Ball Nose Shoulder Ball Nose (17)
  • Shoulder Milling Shoulder Milling (23)
  • Shoulder Roughing Shoulder Roughing (6)
  • Slot Ball Nose Slot Ball Nose (19)
  • Slot Milling Slot Milling (23)
Cutting Diameter
Cutting Diameter
  • 0.375 in (1)
  • 0.38 in (1)
  • 0.414 in (2)
  • 0.5 in (1)
  • 0.537 in (2)
  • 0.61 in (2)
  • 0.625 in (1)
  • 0.626 in (1)
  • 0.75 in (1)
  • 0.761 in (2)
  • 0.766 in (1)
  • 0.771 in (1)
  • 1.01 in (1)
  • 1.081 in (1)
  • 1.473 in (1)
  • 1.506 in (1)
  • 2.003 in (1)
  • 2.501 in (1)
  • 2.653 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 9.525 mm (1)
  • 9.65 mm (1)
  • 10.5 mm (2)
  • 12.701 mm (1)
  • 13.65 mm (2)
  • 15.5 mm (2)
  • 15.875 mm (1)
  • 15.9 mm (1)
  • 19.05 mm (1)
  • 19.326 mm (2)
  • 19.451 mm (1)
  • 19.576 mm (1)
  • 25.651 mm (1)
  • 27.451 mm (1)
  • 37.426 mm (1)
  • 38.225 mm (1)
  • 50.875 mm (1)
  • 63.526 mm (1)
  • 67.375 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 15.875 mm (1)
  • 16.0 mm (1)
  • 19.05 mm (1)
  • 20.0 mm (4)
  • 25.0 mm (2)
  • 25.401 mm (2)
  • 31.75 mm (3)
  • 32.0 mm (2)
  • 38.1 mm (1)
  • 40.0 mm (1)
  • 50.0 mm (1)
  • 50.801 mm (1)
  • 63.5 mm (1)
  • 76.2 mm (1)
  • 80.0 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.625 in (1)
  • 0.63 in (1)
  • 0.75 in (1)
  • 0.787 in (4)
  • 0.984 in (2)
  • 1.0 in (2)
  • 1.25 in (3)
  • 1.26 in (2)
  • 1.5 in (1)
  • 1.575 in (1)
  • 1.969 in (1)
  • 2.0 in (1)
  • 2.5 in (1)
  • 3.0 in (1)
  • 3.15 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 3.176 mm (5)
  • 4.75 mm (6)
  • 6.325 mm (11)
  • 6.351 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.125 in (5)
  • 0.187 in (6)
  • 0.249 in (11)
  • 0.25 in (1)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 1.022 in (1)
  • 1.024 in (1)
  • 1.181 in (2)
  • 1.192 in (1)
  • 1.22 in (2)
  • 1.25 in (1)
  • 1.379 in (1)
  • 1.5 in (1)
  • 1.536 in (1)
  • 1.556 in (1)
  • 1.61 in (1)
  • 1.772 in (1)
  • 1.929 in (1)
  • 1.969 in (3)
  • 2.0 in (3)
  • 3.11 in (1)
  • 3.5 in (1)
Reach Min to Reach Max
Reach
Reach
  • 25.925 mm (1)
  • 26.0 mm (1)
  • 30.0 mm (2)
  • 30.276 mm (1)
  • 31.0 mm (2)
  • 31.75 mm (1)
  • 35.0 mm (1)
  • 38.1 mm (1)
  • 39.0 mm (1)
  • 39.526 mm (1)
  • 40.901 mm (1)
  • 45.0 mm (1)
  • 49.0 mm (1)
  • 50.0 mm (3)
  • 50.801 mm (3)
  • 79.0 mm (1)
  • 88.9 mm (1)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (23)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (4)
  • B-Cutter Retention Screw (1)
  • Screw-On Connection (6)
  • Straight-Cylindrical (12)
Number of Flutes
Number of Flutes
  • 2 (4)
  • 3 (13)
  • 4 (4)
  • 5 (2)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.969 in (4)
  • 2.0 in (3)
  • 2.116 in (1)
  • 2.244 in (1)
  • 2.465 in (1)
  • 2.736 in (1)
  • 2.95 in (1)
  • 2.953 in (1)
  • 3.2 in (1)
  • 3.228 in (2)
  • 3.781 in (1)
  • 3.801 in (1)
  • 4.0 in (1)
  • 4.331 in (2)
  • 5.5 in (2)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 50.0 mm (4)
  • 50.801 mm (3)
  • 53.75 mm (1)
  • 57.0 mm (1)
  • 62.6 mm (1)
  • 69.5 mm (1)
  • 74.925 mm (1)
  • 75.0 mm (1)
  • 81.275 mm (1)
  • 82.0 mm (2)
  • 96.0 mm (1)
  • 96.525 mm (1)
  • 101.601 mm (1)
  • 110.0 mm (2)
  • 139.701 mm (2)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.125 in (7)
  • 0.188 in (11)
  • 0.25 in (17)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 3.176 mm (7)
  • 4.775 mm (11)
  • 6.351 mm (17)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K313 (1)
  • KY1525 (12)
  • KY1540 (14)
  • KY2100 (12)
  • KY4300 (1)
  • KYHS10 (23)
  • KYS30 (28)
  • KYSM10 (23)
  • KYSP30 (26)
Hand Of Tool
Hand Of Tool
  • R (23)
Wiper Insert
Wiper Insert
  • N (12)
Maximum Ramp Angle
Maximum Ramp Angle
  • 1.0 (1)
  • 1.95 (1)
  • 2.0 (2)
  • 2.5 (1)
  • 2.87 (1)
  • 3.0 (2)
  • 4.2 (1)
  • 4.233 (1)
  • 4.25 (2)
  • 8.0 (4)
  • 10.0 (3)
  • 12.0 (1)
  • 13.0 (2)
  • 14.0 (1)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
Front-End
Neck Diameter
Neck Diameter
  • 0.551 in (1)
  • 0.669 in (1)
  • 0.709 in (2)
  • 0.906 in (1)
  • 0.921 in (1)
  • 1.196 in (1)
  • 1.22 in (1)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 14.0 mm (1)
  • 17.0 mm (1)
  • 18.0 mm (2)
  • 23.0 mm (1)
  • 23.401 mm (1)
  • 30.375 mm (1)
  • 31.0 mm (1)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
Insert Geometry
Shape
Shape
  • R-ROUND (12)
Insert IC Size
Insert IC Size
  • 6.351 mm (2)
  • 9.525 mm (5)
  • 12.701 mm (5)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.25 in (2)
  • 0.375 in (5)
  • 0.5 in (5)
Insert IC Size Min to Insert IC Size Max
Cutting Tool Material
Cutting Tool Material
  • C A (1)
  • C N (10)
  • H W (1)
Tolerance Class
Tolerance Class
  • G (12)
Back-End
Connection Type
Connection Type
  • CYLINDRICAL (12)
  • SCREW-ON (6)
  • SHELL MILL (5)
Back-End Diameter
Back-End Diameter
  • 15.875 mm (1)
  • 16.0 mm (2)
  • 18.0 mm (2)
  • 19.05 mm (3)
  • 20.0 mm (2)
  • 21.0 mm (2)
  • 25.0 mm (1)
  • 25.401 mm (2)
  • 27.0 mm (1)
  • 29.0 mm (2)
  • 31.75 mm (2)
  • 32.0 mm (2)
  • 38.1 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.625 in (1)
  • 0.63 in (2)
  • 0.709 in (2)
  • 0.75 in (3)
  • 0.787 in (2)
  • 0.828 in (2)
  • 0.984 in (1)
  • 1.0 in (2)
  • 1.063 in (1)
  • 1.143 in (2)
  • 1.25 in (2)
  • 1.26 in (2)
  • 1.5 in (1)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?