KDM • RD.X07...

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (36)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (30)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (30)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (30)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (30)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (36)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (30)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (30)
  • M Stainless Steel (30)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (30)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (30)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (30)
  • K Cast Iron (32)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (32)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (32)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (32)
  • N Non-Ferrous Materials (26)
    • N1
      Wrought Aluminum (26)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (26)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (26)
  • S High-Temp Alloys (28)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (28)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (28)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (28)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (28)
  • H Hardened Materials (30)
    • H1
      Hardened Materials 44-48 HRC (30)
Applications
Applications
  • Face Milling Face Milling (18)
  • Pocket Pocket (18)
  • Pocket Helical Pocket Helical (18)
  • Pocket Milling Pocket Milling (18)
  • Profile Milling Profile Milling (18)
  • Ramping Ramping (18)
  • Shoulder Ball Nose Shoulder Ball Nose (18)
  • Shoulder Milling Shoulder Milling (18)
Cutting Diameter
Cutting Diameter
  • 0.197 in (2)
  • 0.224 in (2)
  • 0.315 in (6)
  • 0.35 in (1)
  • 0.475 in (2)
  • 0.512 in (1)
  • 0.709 in (1)
  • 0.724 in (1)
  • 0.906 in (1)
  • 1.102 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 5.0 mm (2)
  • 5.7 mm (2)
  • 8.0 mm (6)
  • 8.875 mm (1)
  • 12.05 mm (2)
  • 13.0 mm (1)
  • 18.0 mm (1)
  • 18.401 mm (1)
  • 23.0 mm (1)
  • 28.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 12.0 mm (2)
  • 12.701 mm (2)
  • 15.0 mm (6)
  • 15.875 mm (1)
  • 19.05 mm (2)
  • 20.0 mm (1)
  • 25.0 mm (1)
  • 25.401 mm (1)
  • 30.0 mm (1)
  • 35.0 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.473 in (2)
  • 0.5 in (2)
  • 0.591 in (6)
  • 0.625 in (1)
  • 0.75 in (2)
  • 0.787 in (1)
  • 0.984 in (1)
  • 1.0 in (1)
  • 1.181 in (1)
  • 1.379 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 3.5 mm (18)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.138 in (18)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.709 in (1)
  • 0.75 in (1)
  • 0.787 in (1)
  • 0.906 in (2)
  • 0.984 in (1)
  • 1.181 in (1)
  • 1.379 in (1)
  • 1.575 in (3)
  • 1.693 in (2)
  • 2.0 in (3)
  • 4.0 in (2)
Reach Min to Reach Max
Reach
Reach
  • 18.0 mm (1)
  • 19.05 mm (1)
  • 20.0 mm (1)
  • 23.0 mm (2)
  • 25.0 mm (1)
  • 30.0 mm (1)
  • 35.0 mm (1)
  • 40.0 mm (3)
  • 43.0 mm (2)
  • 50.801 mm (3)
  • 101.601 mm (2)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (18)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Screw-On Connection (9)
  • Weldon (9)
Number of Flutes
Number of Flutes
  • 1 (1)
  • 2 (9)
  • 3 (3)
  • 4 (2)
  • 5 (2)
  • 6 (1)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.287 in (1)
  • 1.602 in (2)
  • 1.799 in (2)
  • 1.969 in (1)
  • 2.244 in (1)
  • 2.657 in (2)
  • 3.543 in (1)
  • 3.971 in (2)
  • 4.05 in (1)
  • 4.331 in (1)
  • 5.984 in (1)
  • 6.28 in (2)
  • 6.969 in (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 32.7 mm (1)
  • 40.7 mm (2)
  • 45.7 mm (2)
  • 50.0 mm (1)
  • 57.0 mm (1)
  • 67.5 mm (2)
  • 90.0 mm (1)
  • 100.851 mm (2)
  • 102.875 mm (1)
  • 110.0 mm (1)
  • 152.0 mm (1)
  • 159.5 mm (2)
  • 177.0 mm (1)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.098 in (1)
  • 0.138 in (28)
  • 0.197 in (4)
  • 0.237 in (3)
  • 0.315 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 2.5 mm (1)
  • 3.5 mm (28)
  • 5.0 mm (4)
  • 6.0 mm (3)
  • 8.0 mm (2)
Corner Radius Min to Corner Radius Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K110M (17)
  • KC510M (22)
  • KC522M (19)
  • KC525M (18)
  • KC715M (18)
  • KC725M (24)
  • KCKP10 (20)
  • KCPM20 (17)
  • KTPK20 (18)
Hand Of Tool
Hand Of Tool
  • R (18)
Wiper Insert
Wiper Insert
  • N (20)
Maximum Ramp Angle
Maximum Ramp Angle
  • 2.5 (1)
  • 3.0 (1)
  • 3.5 (1)
  • 4.0 (1)
  • 4.5 (7)
  • 5.5 (1)
  • 6.0 (1)
  • 7.0 (1)
  • 9.5 (2)
  • 10.0 (2)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
Front-End
Center Cutting
Center Cutting
Insert Geometry
Shape
Shape
  • R-ROUND (20)
Insert IC Size
Insert IC Size
  • 5.0 mm (1)
  • 7.0 mm (10)
  • 10.0 mm (4)
  • 12.0 mm (3)
  • 16.0 mm (2)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.197 in (1)
  • 0.276 in (10)
  • 0.394 in (4)
  • 0.473 in (3)
  • 0.63 in (2)
Insert IC Size Min to Insert IC Size Max
Chip Breaker CBMD
Chip Breaker CBMD
  • LN (10)
  • LP (10)
Cutting Tool Material
Cutting Tool Material
  • H W (20)
Tolerance Class
Tolerance Class
  • H (19)
  • P (1)
Back-End
Connection Type
Connection Type
  • CYLINDRICAL (9)
  • SCREW-ON (9)
Back-End Diameter
Back-End Diameter
  • 9.8 mm (1)
  • 13.0 mm (4)
  • 15.875 mm (2)
  • 16.0 mm (2)
  • 18.0 mm (1)
  • 19.05 mm (1)
  • 20.0 mm (1)
  • 21.0 mm (1)
  • 25.0 mm (1)
  • 25.401 mm (2)
  • 29.0 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.386 in (1)
  • 0.512 in (4)
  • 0.625 in (2)
  • 0.63 in (2)
  • 0.709 in (1)
  • 0.75 in (1)
  • 0.787 in (1)
  • 0.828 in (1)
  • 0.984 in (1)
  • 1.0 in (2)
  • 1.143 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?