Rodeka™ Series

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (109)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (106)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (106)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (106)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (106)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (106)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (109)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (109)
  • M Stainless Steel (109)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (109)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (109)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (109)
  • K Cast Iron (89)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (89)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (89)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (89)
  • N Non-Ferrous Materials (52)
    • N1
      Wrought Aluminum (52)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (52)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (52)
  • S High-Temp Alloys (106)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (97)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (97)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (97)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (106)
  • H Hardened Materials (78)
    • H1
      Hardened Materials 44-48 HRC (78)
Applications
Applications
  • Face Milling Face Milling (70)
  • Pocket Pocket (70)
  • Pocket Milling Pocket Milling (70)
  • Profile Milling Profile Milling (70)
  • Shoulder Ball Nose Shoulder Ball Nose (70)
  • Shoulder Milling Shoulder Milling (70)
  • Shoulder Roughing Shoulder Roughing (70)
  • Slot Milling Slot Milling (49)
Cutting Diameter
Cutting Diameter
  • 0.591 in (5)
  • 0.606 in (3)
  • 0.778 in (2)
  • 0.787 in (4)
  • 0.866 in (3)
  • 0.87 in (1)
  • 0.906 in (1)
  • 0.984 in (1)
  • 1.028 in (2)
  • 1.102 in (2)
  • 1.106 in (1)
  • 1.181 in (4)
  • 1.339 in (1)
  • 1.37 in (1)
  • 1.417 in (1)
  • 1.496 in (3)
  • 1.528 in (2)
  • 1.575 in (3)
  • 1.606 in (1)
  • 1.655 in (1)
  • 1.85 in (2)
  • 1.969 in (1)
  • 2.008 in (3)
  • 2.028 in (1)
  • 2.087 in (1)
  • 2.126 in (1)
  • 2.205 in (1)
  • 2.37 in (1)
  • 2.52 in (2)
  • 2.528 in (1)
  • 2.677 in (3)
  • 2.757 in (1)
  • 3.307 in (2)
  • 3.37 in (2)
  • 3.465 in (2)
  • 4.291 in (2)
  • 4.37 in (1)
  • 5.67 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.0 mm (5)
  • 15.4 mm (3)
  • 19.75 mm (2)
  • 20.0 mm (4)
  • 22.0 mm (3)
  • 22.1 mm (1)
  • 23.0 mm (1)
  • 25.0 mm (1)
  • 26.1 mm (2)
  • 28.0 mm (2)
  • 28.1 mm (1)
  • 30.0 mm (4)
  • 34.0 mm (1)
  • 34.801 mm (1)
  • 36.0 mm (1)
  • 38.0 mm (3)
  • 38.801 mm (2)
  • 40.0 mm (3)
  • 40.801 mm (1)
  • 42.0 mm (1)
  • 47.0 mm (2)
  • 50.0 mm (1)
  • 51.0 mm (3)
  • 51.5 mm (1)
  • 53.0 mm (1)
  • 54.0 mm (1)
  • 56.0 mm (1)
  • 60.2 mm (1)
  • 64.0 mm (2)
  • 64.2 mm (1)
  • 68.0 mm (3)
  • 70.0 mm (1)
  • 84.0 mm (2)
  • 85.601 mm (2)
  • 88.0 mm (2)
  • 109.0 mm (2)
  • 111.0 mm (1)
  • 144.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 25.0 mm (5)
  • 25.401 mm (3)
  • 31.75 mm (2)
  • 32.0 mm (7)
  • 35.0 mm (2)
  • 38.1 mm (4)
  • 40.0 mm (5)
  • 42.0 mm (1)
  • 50.0 mm (6)
  • 50.801 mm (4)
  • 52.0 mm (3)
  • 63.0 mm (6)
  • 63.5 mm (1)
  • 66.0 mm (3)
  • 76.2 mm (2)
  • 80.0 mm (6)
  • 100.0 mm (4)
  • 101.601 mm (2)
  • 125.0 mm (2)
  • 127.0 mm (1)
  • 160.0 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.984 in (5)
  • 1.0 in (3)
  • 1.25 in (2)
  • 1.26 in (7)
  • 1.379 in (2)
  • 1.5 in (4)
  • 1.575 in (5)
  • 1.655 in (1)
  • 1.969 in (6)
  • 2.0 in (4)
  • 2.047 in (3)
  • 2.48 in (6)
  • 2.5 in (1)
  • 2.598 in (3)
  • 3.0 in (2)
  • 3.15 in (6)
  • 3.938 in (4)
  • 4.0 in (2)
  • 4.921 in (2)
  • 5.0 in (1)
  • 6.299 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 2.975 mm (1)
  • 3.0 mm (24)
  • 3.95 mm (18)
  • 4.95 mm (5)
  • 5.0 mm (18)
  • 6.0 mm (4)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.117 in (1)
  • 0.119 in (24)
  • 0.156 in (18)
  • 0.195 in (5)
  • 0.197 in (18)
  • 0.237 in (4)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 1.25 in (1)
  • 1.26 in (5)
  • 1.5 in (4)
  • 1.57 in (2)
  • 1.575 in (21)
  • 1.969 in (22)
  • 2.0 in (12)
  • 2.48 in (3)
Reach Min to Reach Max
Reach
Reach
  • 31.75 mm (1)
  • 32.0 mm (5)
  • 38.1 mm (4)
  • 39.875 mm (2)
  • 40.0 mm (21)
  • 50.0 mm (22)
  • 50.801 mm (12)
  • 63.0 mm (3)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (70)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (46)
  • SHCS or RetScrw Or BoltCircle (1)
  • Screw-On Connection (10)
  • Straight-Cylindrical (9)
  • Weldon (4)
Number of Flutes
Number of Flutes
  • 10 (1)
  • 12 (1)
  • 2 (3)
  • 3 (14)
  • 4 (14)
  • 5 (11)
  • 6 (9)
  • 7 (9)
  • 8 (7)
  • 9 (1)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.57 in (2)
  • 1.575 in (10)
  • 1.969 in (22)
  • 2.0 in (10)
  • 2.48 in (3)
  • 3.504 in (1)
  • 4.28 in (2)
  • 4.921 in (1)
  • 5.906 in (1)
  • 6.0 in (1)
  • 7.875 in (3)
  • 9.0 in (1)
  • 9.843 in (3)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 39.875 mm (2)
  • 40.0 mm (10)
  • 50.0 mm (22)
  • 50.801 mm (10)
  • 63.0 mm (3)
  • 89.0 mm (1)
  • 108.7 mm (2)
  • 125.0 mm (1)
  • 150.0 mm (1)
  • 152.4 mm (1)
  • 200.0 mm (3)
  • 228.601 mm (1)
  • 250.0 mm (3)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.197 in (35)
  • 0.237 in (50)
  • 0.315 in (31)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 5.0 mm (35)
  • 6.0 mm (50)
  • 8.0 mm (31)
Corner Radius Min to Corner Radius Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC422M (54)
  • KC510M (52)
  • KC520M (71)
  • KC522M (74)
  • KC725M (82)
  • KCK15 (71)
  • KCK20B (19)
  • KCMP30 (73)
  • KCPK30 (79)
  • KCPM20 (73)
  • KCPM40 (76)
  • KCSM30 (71)
  • KCSM40 (73)
Hand Of Tool
Hand Of Tool
  • R (70)
Wiper Insert
Wiper Insert
  • N (46)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.2 (3)
  • 0.21 (2)
  • 0.24 (1)
  • 0.25 (1)
  • 0.26 (4)
  • 0.29 (3)
  • 0.3 (1)
  • 0.31 (1)
  • 0.32 (5)
  • 0.35 (2)
  • 0.37 (1)
  • 0.38 (3)
  • 0.39 (1)
  • 0.4 (5)
  • 0.42 (4)
  • 0.44 (1)
  • 0.45 (1)
  • 0.47 (3)
  • 0.48 (1)
  • 0.49 (5)
  • 0.5 (3)
  • 0.52 (2)
  • 0.53 (1)
  • 0.54 (2)
  • 0.6 (8)
  • 0.66 (1)
  • 0.7 (2)
  • 0.74 (1)
  • 0.88 (2)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
Front-End
Center Cutting
Center Cutting
Insert Geometry
Shape
Shape
  • R-ROUND (46)
Insert IC Size
Insert IC Size
  • 10.0 mm (12)
  • 12.0 mm (21)
  • 16.0 mm (13)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.394 in (12)
  • 0.473 in (21)
  • 0.63 in (13)
Insert IC Size Min to Insert IC Size Max
Chip Breaker CBMD
Chip Breaker CBMD
  • GD (18)
  • GDX (2)
  • HD (17)
  • LD (9)
Cutting Tool Material
Cutting Tool Material
  • H W (46)
Tolerance Class
Tolerance Class
  • G (21)
  • P (25)
Back-End
Connection Type
Connection Type
  • CYLINDRICAL (13)
  • SCREW-ON (10)
  • SHELL MILL (47)
Back-End Diameter
Back-End Diameter
  • 12.701 mm (2)
  • 16.0 mm (4)
  • 19.05 mm (5)
  • 21.0 mm (2)
  • 22.0 mm (15)
  • 25.0 mm (3)
  • 25.401 mm (4)
  • 27.0 mm (9)
  • 29.0 mm (8)
  • 31.75 mm (2)
  • 32.0 mm (10)
  • 38.1 mm (3)
  • 40.0 mm (3)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.5 in (2)
  • 0.63 in (4)
  • 0.75 in (5)
  • 0.828 in (2)
  • 0.866 in (15)
  • 0.984 in (3)
  • 1.0 in (4)
  • 1.063 in (9)
  • 1.143 in (8)
  • 1.25 in (2)
  • 1.26 in (10)
  • 1.5 in (3)
  • 1.575 in (3)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?