Product Suggestions

Product Family suggestions

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu
Need Help? Contact an Expert site stretcher close

Face Milling – Indexable Inserts & Mill Bodies

One of the most fundamental operations performed on any machined part is creating a smooth workpiece surface through face milling. Kennametal indexable face milling inserts and bodies are the ideal tooling system for the perpendicular cutting of flat surfaces in a variety of materials. Our face milling platform features different sizes, cutting edges, and precision grades. Regardless of your application, you can trust the quality and designs of Kennametal indexable face mills to get the job done.

Select Filters
Filters
Filters
    • Applied Filters:
    • Clear all filters
  • X First Choice:
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (110)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (100)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (100)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (100)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (100)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (101)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (109)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (109)
  • M Stainless Steel (109)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (109)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (109)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (109)
  • K Cast Iron (95)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (95)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (95)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (95)
  • N Non-Ferrous Materials (74)
    • N1
      Wrought Aluminum
      (74)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (74)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (74)
  • S High-Temp Alloys (109)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (98)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (98)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (98)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (109)
  • H Hardened Materials (73)
    • H1
      Hardened Materials 44-48 HRC
      (73)
Select First Choice
  • BR (32)
  • CN (149)
  • DE (151)
  • GB (100)
  • IN (42)
  • SG (58)
  • US (133)
Applications
Applications
  • Chamfer Milling Chamfer Milling (58)
  • Face Milling Face Milling (73)
  • ID Thread Turning ID Thread Turning (1)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (6)
  • Shoulder Milling Shoulder Milling (6)
  • Shoulder Roughing Shoulder Roughing (6)
  • Shoulder Square End Shoulder Square End (6)
Cutting Diameter
Cutting Diameter
  • 1.0 in (3)
  • 1.25 in (4)
  • 1.5 in (3)
  • 1.575 in (2)
  • 2.0 in (8)
  • 2.48 in (2)
  • 2.5 in (8)
  • 3.0 in (10)
  • 3.15 in (4)
  • 3.938 in (3)
  • 4.0 in (9)
  • 4.921 in (2)
  • 5.0 in (6)
  • 6.0 in (4)
  • 6.299 in (1)
  • 7.875 in (1)
  • 8.0 in (1)
  • 10.0 in (1)
  • 12.0 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 25.401 mm (3)
  • 31.75 mm (4)
  • 38.1 mm (3)
  • 40.0 mm (2)
  • 50.801 mm (8)
  • 63.0 mm (2)
  • 63.5 mm (8)
  • 76.2 mm (10)
  • 80.0 mm (4)
  • 100.0 mm (3)
  • 101.601 mm (9)
  • 125.0 mm (2)
  • 127.0 mm (6)
  • 152.4 mm (4)
  • 160.0 mm (1)
  • 200.0 mm (1)
  • 203.201 mm (1)
  • 254.0 mm (1)
  • 304.8 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 33.575 mm (3)
  • 39.926 mm (3)
  • 44.45 mm (1)
  • 44.901 mm (1)
  • 46.276 mm (2)
  • 48.176 mm (1)
  • 51.0 mm (1)
  • 57.151 mm (1)
  • 58.95 mm (3)
  • 61.801 mm (2)
  • 63.95 mm (1)
  • 69.75 mm (1)
  • 71.65 mm (3)
  • 74.0 mm (1)
  • 74.5 mm (3)
  • 82.45 mm (1)
  • 82.551 mm (1)
  • 84.351 mm (3)
  • 87.2 mm (3)
  • 88.15 mm (1)
  • 89.325 mm (1)
  • 91.0 mm (2)
  • 95.15 mm (1)
  • 107.5 mm (1)
  • 107.926 mm (1)
  • 109.75 mm (3)
  • 110.976 mm (2)
  • 112.575 mm (2)
  • 120.525 mm (1)
  • 133.15 mm (1)
  • 135.15 mm (2)
  • 135.951 mm (1)
  • 137.951 mm (3)
  • 145.951 mm (1)
  • 163.375 mm (3)
  • 170.976 mm (1)
  • 171.4 mm (1)
  • 211.0 mm (1)
  • 214.175 mm (1)
  • 265.0 mm (1)
  • 315.8 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 1.322 in (3)
  • 1.572 in (3)
  • 1.75 in (1)
  • 1.768 in (1)
  • 1.822 in (2)
  • 1.897 in (1)
  • 2.008 in (1)
  • 2.25 in (1)
  • 2.321 in (3)
  • 2.433 in (2)
  • 2.519 in (1)
  • 2.746 in (1)
  • 2.821 in (3)
  • 2.914 in (1)
  • 2.934 in (3)
  • 3.246 in (1)
  • 3.25 in (1)
  • 3.321 in (3)
  • 3.434 in (3)
  • 3.47 in (1)
  • 3.517 in (1)
  • 3.583 in (2)
  • 3.746 in (1)
  • 4.232 in (1)
  • 4.249 in (1)
  • 4.321 in (3)
  • 4.369 in (2)
  • 4.432 in (2)
  • 4.745 in (1)
  • 5.242 in (1)
  • 5.321 in (2)
  • 5.352 in (1)
  • 5.431 in (3)
  • 5.746 in (1)
  • 6.432 in (3)
  • 6.731 in (1)
  • 6.748 in (1)
  • 8.307 in (1)
  • 8.432 in (1)
  • 10.433 in (1)
  • 12.433 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 1.651 mm (3)
  • 2.2 mm (6)
  • 3.2 mm (7)
  • 3.225 mm (18)
  • 4.3 mm (4)
  • 4.476 mm (2)
  • 4.5 mm (27)
  • 4.601 mm (3)
  • 6.351 mm (3)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.065 in (3)
  • 0.088 in (6)
  • 0.126 in (7)
  • 0.127 in (18)
  • 0.169 in (4)
  • 0.176 in (2)
  • 0.177 in (27)
  • 0.181 in (3)
  • 0.25 in (3)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 1.25 in (3)
  • 1.5 in (4)
  • 1.57 in (5)
  • 1.575 in (14)
  • 1.594 in (2)
  • 1.75 in (15)
  • 1.77 in (2)
  • 1.969 in (8)
  • 2.0 in (3)
  • 2.38 in (10)
  • 2.402 in (2)
  • 2.48 in (4)
  • 3.15 in (1)
Reach Min to Reach Max
Reach
Reach
  • 31.75 mm (3)
  • 38.1 mm (4)
  • 39.875 mm (5)
  • 40.0 mm (14)
  • 40.5 mm (2)
  • 44.45 mm (15)
  • 44.95 mm (2)
  • 50.0 mm (8)
  • 50.801 mm (3)
  • 60.45 mm (10)
  • 60.975 mm (2)
  • 63.0 mm (4)
  • 80.0 mm (1)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 15.0 (9)
  • 45.0 (54)
  • 58.0 (4)
  • 90.0 (6)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • 2 Key & Socket Head Cap Screw (6)
  • A-Socket Head Cap Screw (51)
  • B-Cutter Retention Screw (3)
  • C-Bolt Circle (4)
  • SHCS or RetScrw Or BoltCircle (1)
  • Straight-Cylindrical (5)
  • Weldon (3)
Number of Flutes
Number of Flutes
  • 10 (4)
  • 11 (2)
  • 12 (6)
  • 14 (1)
  • 16 (5)
  • 2 (1)
  • 20 (1)
  • 24 (1)
  • 3 (3)
  • 4 (9)
  • 5 (12)
  • 6 (12)
  • 7 (1)
  • 8 (11)
  • 9 (4)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (10)
  • 6.0 (56)
  • 12.0 (121)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.0 in (7)
  • 0.031 in (9)
  • 0.039 in (49)
  • 0.047 in (64)
  • 0.063 in (56)
  • 0.095 in (6)
  • 0.126 in (33)
  • 0.171 in (42)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (7)
  • 0.8 mm (9)
  • 1.0 mm (49)
  • 1.201 mm (64)
  • 1.6 mm (56)
  • 2.401 mm (6)
  • 3.2 mm (33)
  • 4.351 mm (42)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (132)
  • 0.9 mm (7)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (132)
  • 0.035 in (7)
Corner Chamfer Min to Corner Chamfer Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K313 (32)
  • KC410M (63)
  • KC510M (33)
  • KC520M (68)
  • KC522M (72)
  • KC725M (75)
  • KCK15 (76)
  • KCK20B (67)
  • KCKP10 (32)
  • KCMP30 (32)
  • KCPK30 (78)
  • KCPM20 (67)
  • KCPM40 (76)
  • KCSM30 (67)
  • KCSM40 (76)
  • KD1400 (10)
  • KD1415 (6)
  • KD1425 (6)
  • KTPK20 (25)
  • KY3500 (36)
  • KYS30 (35)
  • X00577 (6)
  • X00579 (6)
  • X00602 (6)
  • X00603 (6)
  • X00604 (6)
Hand Of Tool
Hand Of Tool
  • R (73)
Wiper Insert
Wiper Insert
  • N (56)
  • Y (4)
Front-End
Insert Shape
Insert Shape
  • H-HEXAGON 120 (123)
  • X-DOV-LOK 90 (10)
Neck Diameter
Neck Diameter
  • 1.006 in (3)
  • 1.256 in (5)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 25.55 mm (3)
  • 31.901 mm (5)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
Insert Geometry
Shape
Shape
  • H-HEXAGON 120 (56)
  • X-DOV-LOK 90 (4)
Insert IC Size
Insert IC Size
  • 12.0 mm (18)
  • 15.875 mm (38)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.473 in (18)
  • 0.625 in (38)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 6.426 mm (1)
  • 6.45 mm (17)
  • 8.5 mm (7)
  • 8.576 mm (12)
  • 8.6 mm (16)
  • 9.175 mm (1)
  • 9.576 mm (2)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.253 in (1)
  • 0.254 in (17)
  • 0.335 in (7)
  • 0.338 in (12)
  • 0.339 in (16)
  • 0.361 in (1)
  • 0.377 in (2)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • GD (18)
  • HD (23)
  • LD (14)
Cutting Tool Material
Cutting Tool Material
  • C N (1)
  • D P (4)
  • H W (55)
Tolerance Class
Tolerance Class
  • D (2)
  • E (1)
  • G (28)
  • P (25)
Back-End
Connection Type
Connection Type
  • CYLINDRICAL (8)
  • SHELL MILL (65)
Back-End Diameter
Back-End Diameter
  • 12.701 mm (3)
  • 19.05 mm (18)
  • 22.0 mm (3)
  • 25.0 mm (1)
  • 25.401 mm (15)
  • 27.0 mm (4)
  • 31.75 mm (5)
  • 32.0 mm (3)
  • 38.1 mm (10)
  • 40.0 mm (3)
  • 50.801 mm (4)
  • 60.0 mm (1)
  • 63.5 mm (3)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.5 in (3)
  • 0.75 in (18)
  • 0.866 in (3)
  • 0.984 in (1)
  • 1.0 in (15)
  • 1.063 in (4)
  • 1.25 in (5)
  • 1.26 in (3)
  • 1.5 in (10)
  • 1.575 in (3)
  • 2.0 in (4)
  • 2.362 in (1)
  • 2.5 in (3)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
Narrow by category:
    • Applied Filters:
    • Clear all filters
  • X First Choice:
View Products in
Metric
Inch

ORIGINAL PRODUCT

Dodeka™ 45° • Weldon End Mills • Metric Dodeka™ 45° • Weldon End Mills • Metric

End Mills
(1 Products)
  • Face MillingFace Milling
  • Side Milling/Shoulder Milling: Eased ChamferSide Milling/Shoulder Milling: Eased Chamfer
  • Shank - Cylindrical WeldonShank - Cylindrical Weldon
  • Milling - Through CoolantMilling - Through Coolant
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L3] Usable Length [L3] Usable Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Weight Kilograms Max RPM
3324830 KSHR40D04R50B25SHN09 KSHR40D04R50B25SHN09   40.0000 1.574 51.0000 2.008 25.0 .9843 107.0000 4.213 50.0000 1.969 4.5000 .1770 4 0.52 15800
    List price:
    $484.31 /each
    Your price:
    List price:
    Discount: %
    Your price:
    Replacement This item is no longer available
    Replacement Product Please contact customer service for assistance

    ORIGINAL PRODUCT

    Dodeka™ 45° • Shell Mills • Metric Dodeka™ 45° • Shell Mills • Metric

    Shell Mills
    (8 Products)
    • Face MillingFace Milling
    • Side Milling/Shoulder Milling: Eased ChamferSide Milling/Shoulder Milling: Eased Chamfer
    • Milling - Side and FaceMilling - Side and Face
    • Milling - Through CoolantMilling - Through Coolant
    View Products
    SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Weight Kilograms Max RPM
    3325167 KSHR100B08RS45HN09 KSHR100B08RS45HN09   100.0000 3.937 110.9800 4.369 32.0 1.26 80.0000 3.149 50.0000 1.968 4.4700 .1760 8 1.68 6300
      List price:
      $1,115.36 /each
      Your price:
      3325168 KSHR100B11RS45HN09 KSHR100B11RS45HN09   100.0000 3.937 110.9800 4.369 32.0 1.259 80.0000 3.149 50.0000 1.968 4.4700 .1760 11 1.73 6300
        List price:
        $1,313.48 /each
        Your price:
        3325169 KSHR125B10RS45HN09 KSHR125B10RS45HN09   125.0000 4.921 135.9400 5.351 40.0 1.574 90.0000 3.543 63.0000 2.480 4.5000 .1770 10 2.77 5050
          List price:
          $1,394.19 /each
          Your price:
          3325163 KSHR63A06RS45HN09 KSHR63A06RS45HN09   63.0000 2.480 74.0000 2.913 22.0 .8661 50.0000 1.968 40.0000 1.575 4.5000 .1770 6 0.56 10100
            List price:
            $763.15 /each
            Your price:
            3325165 KSHR80A06RS45HN09 KSHR80A06RS45HN09   80.0000 3.149 91.0000 3.582 27.0 1.063 60.0000 2.362 50.0000 1.968 4.5000 .1770 6 1.07 7900
              List price:
              $836.53 /each
              Your price:
              3325166 KSHR80A09RS45HN09 KSHR80A09RS45HN09   80.0000 3.149 91.0000 3.582 27.0 1.063 60.0000 2.362 50.0000 1.968 4.5000 .1770 9 1.11 7900
                List price:
                $1,034.67 /each
                Your price:
                List price:
                Discount: %
                Your price:
                Replacement This item is no longer available
                Replacement Product Please contact customer service for assistance

                ORIGINAL PRODUCT

                Dodeka™ Mini High-Feed 75° • Shell Mills • Inch Dodeka™ Mini High-Feed 75° • Shell Mills • Inch

                Shell Mills
                (2 Products)
                • Face MillingFace Milling
                • Milling - Side and FaceMilling - Side and Face
                • Milling - Through CoolantMilling - Through Coolant
                View Products
                SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Weight Pounds Max RPM
                4136412 KSHRHF200HN43M3 KSHRHF200HN43M3   50.8000 2.000 63.9400 2.517 19.05 .75 44.4500 1.750 40.0000 1.575 1.6500 .0650 5 1.10 12500
                  List price:
                  $680.33 /each
                  Your price:
                  4136414 KSHRHF300HN43M4 KSHRHF300HN43M4   76.2000 3.000 89.3300 3.517 25.4 1.0 55.6000 2.189 44.4500 1.750 1.6500 .0650 8 2.21 8300
                    List price:
                    $958.38 /each
                    Your price:
                    List price:
                    Discount: %
                    Your price:
                    Replacement This item is no longer available
                    Replacement Product Please contact customer service for assistance

                    ORIGINAL PRODUCT

                    Dodeka™ Mini High-Feed 75° • Cylindrical End Mills • Inch Dodeka™ Mini High-Feed 75° • Cylindrical End Mills • Inch

                    End Mills
                    (1 Products)
                    • Face MillingFace Milling
                    • Shank - Cylindrical PlainShank - Cylindrical Plain
                    • Milling - Through CoolantMilling - Through Coolant
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Weight Pounds Max RPM Gage Insert
                    4136410 KSHRHF125D04C100HN43L520 KSHRHF125D04C100HN43L520   31.7500 1.250 44.9000 1.768 25.4 1.0 132.0800 5.200 38.1000 1.500 1.6500 .0650 4 1.28 17600 HNGJ0604ANENLD
                      List price:
                      $520.62 /each
                      Your price:
                      List price:
                      Discount: %
                      Your price:
                      Replacement This item is no longer available
                      Replacement Product Please contact customer service for assistance

                      ORIGINAL PRODUCT

                      Dodeka™ Mini 45° • Weldon End Mills • Inch Dodeka™ Mini 45° • Weldon End Mills • Inch

                      End Mills
                      (2 Products)
                      • Face MillingFace Milling
                      • Side Milling/Shoulder Milling: Eased ChamferSide Milling/Shoulder Milling: Eased Chamfer
                      • Shank - Cylindrical WeldonShank - Cylindrical Weldon
                      • Milling - Through CoolantMilling - Through Coolant
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Weight Pounds Max RPM
                      4130515 KSHR100D03W075HN06 KSHR100D03W075HN06   25.4000 1.000 33.5800 1.322 19.05 .75 83.3000 3.280 31.7500 1.250 3.2000 .1270 3 0.44 19800
                        List price:
                        $437.75 /each
                        Your price:
                        4130517 KSHR125D04W100HN06 KSHR125D04W100HN06   31.7500 1.250 39.9230 1.572 25.4 1.0 96.0000 3.780 38.1000 1.500 3.2000 .1270 4 0.89