successfully added to cart
View Cart

Notifications

Mark all as read

High-Feed Series

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Select First Choice
  • DE (107)
  • GB (66)
  • IN (17)
  • US (80)
Applications
  • Chamfer Milling Chamfer Milling (14)
  • Face Milling Face Milling (250)
  • ID Thread Turning ID Thread Turning (24)
  • Pocket Pocket (229)
  • Pocket Helical Pocket Helical (229)
  • Pocket Milling Pocket Milling (229)
  • Pocket Plunge Milling Pocket Plunge Milling (209)
  • Profile Milling Profile Milling (244)
  • Ramping Ramping (229)
  • Shoulder Milling Shoulder Milling (78)
  • Shoulder Roughing Shoulder Roughing (78)
  • Slot Milling Slot Milling (158)
  • Slot Side Slot Side (83)
Workpiece Material
  • P Steel (343)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (331)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (331)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (331)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (331)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (334)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (336)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (336)
  • M Stainless Steel (336)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (336)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (336)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (336)
  • K Cast Iron (293)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (293)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (293)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (265)
  • N Non-Ferrous Materials (139)
    • N1
      Wrought Aluminum
      (139)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (139)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (139)
  • S High-Temp Alloys (328)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (315)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (315)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (315)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (328)
  • H Hardened Materials (252)
    • H1
      Hardened Materials 44-48 HRC
      (252)
    • H2
      Hardened Materials 48-55 HRC
      (151)
Maximum Cutting Diameter
  • 0.625 (4)
  • 0.626 (1)
  • 0.63 (4)
  • 0.75 (6)
  • 0.787 (6)
  • 0.984 (10)
  • 0.9843 (3)
  • 0.9848 (1)
  • 0.992 (1)
  • 0.9921 (1)
  • 1.0 (11)
  • 1.102 (1)
  • 1.2421 (3)
  • 1.25 (8)
  • 1.2506 (1)
  • 1.259 (3)
  • 1.2598 (6)
  • 1.26 (7)
  • 1.377 (2)
  • 1.3779 (1)
  • 1.378 (3)
  • 1.4921 (1)
  • 1.5 (10)
  • 1.5743 (1)
  • 1.5748 (2)
  • 1.575 (3)
  • 1.653 (1)
  • 1.6536 (2)
  • 1.9681 (1)
  • 1.9685 (8)
  • 1.969 (2)
  • 1.9921 (2)
  • 1.9995 (1)
  • 2.0 (10)
  • 2.0394 (4)
  • 2.047 (1)
  • 2.0472 (2)
  • 2.0473 (2)
  • 2.0478 (1)
  • 2.4799 (2)
  • 2.48 (2)
  • 2.4803 (7)
  • 2.4921 (1)
  • 2.5 (7)
  • 2.598 (3)
  • 2.5984 (6)
  • 3.0 (8)
  • 3.14 (1)
  • 3.1492 (1)
  • 3.1496 (4)
  • 3.15 (1)
  • 3.937 (5)
  • 4.0 (8)
  • 4.921 (3)
  • 4.9212 (1)
  • 4.9213 (3)
  • 5.0 (5)
  • 6.0 (5)
  • 6.299 (1)
  • 6.2992 (2)
to
Maximum Cutting Diameter
  • 15.875 (3)
  • 15.88 (1)
  • 16.0 (5)
  • 19.05 (6)
  • 20.0 (6)
  • 25.0 (14)
  • 25.015 (1)
  • 25.2 (2)
  • 25.4 (10)
  • 28.0 (1)
  • 31.55 (3)
  • 31.74 (3)
  • 31.75 (5)
  • 31.764 (1)
  • 32.0 (16)
  • 35.0 (6)
  • 37.9 (2)
  • 38.1 (9)
  • 40.0 (6)
  • 42.0 (3)
  • 50.0 (11)
  • 50.6 (2)
  • 50.79 (1)
  • 50.8 (10)
  • 51.8 (4)
  • 52.0 (5)
  • 52.015 (1)
  • 63.0 (11)
  • 63.3 (1)
  • 63.5 (7)
  • 66.0 (9)
  • 76.19 (1)
  • 76.2 (6)
  • 76.201 (1)
  • 79.8 (1)
  • 80.0 (6)
  • 100.0 (5)
  • 101.6 (8)
  • 125.0 (7)
  • 127.0 (5)
  • 152.4 (5)
  • 160.0 (3)
to
Cutting Diameter
  • 6.477 (2)
  • 7.6 (2)
  • 8.36 (1)
  • 8.8 (4)
  • 8.9 (3)
  • 9.652 (2)
  • 9.905 (1)
  • 9.98 (1)
  • 10.0 (1)
  • 10.1 (1)
  • 10.53 (1)
  • 10.6 (2)
  • 10.8 (1)
  • 10.85 (2)
  • 11.6 (1)
  • 11.7 (1)
  • 11.75 (2)
  • 11.98 (3)
  • 12.32 (1)
  • 12.379 (3)
  • 12.5 (2)
  • 13.0 (1)
  • 13.21 (1)
  • 13.616 (2)
  • 13.864 (2)
  • 14.071 (1)
  • 14.24 (1)
  • 15.73 (1)
  • 15.8 (2)
  • 15.979 (1)
  • 16.002 (3)
  • 16.04 (4)
  • 16.239 (1)
  • 16.29 (1)
  • 16.6 (2)
  • 16.843 (1)
  • 17.206 (1)
  • 17.6 (1)
  • 17.8 (1)
  • 18.714 (1)
  • 18.728 (1)
  • 18.75 (1)
  • 18.754 (1)
  • 18.756 (1)
  • 18.8 (2)
  • 18.95 (2)
  • 18.964 (4)
  • 19.05 (1)
  • 19.558 (1)
  • 19.939 (2)
  • 20.0 (3)
  • 21.835 (1)
  • 21.96 (2)
  • 22.06 (4)
  • 22.352 (2)
  • 22.4 (1)
  • 23.6 (2)
  • 23.83 (1)
  • 23.95 (1)
  • 24.892 (1)
  • 25.0 (2)
  • 25.11 (1)
  • 25.4 (3)
  • 25.83 (1)
  • 25.876 (1)
  • 25.93 (1)
  • 26.074 (1)
  • 26.67 (1)
  • 26.75 (3)
  • 26.873 (1)
  • 27.069 (1)
  • 27.101 (1)
  • 28.085 (1)
  • 28.82 (1)
  • 28.954 (1)
  • 30.02 (1)
  • 31.574 (1)
  • 31.75 (2)
  • 31.818 (1)
  • 32.0 (4)
  • 32.41 (3)
  • 32.617 (1)
  • 33.6 (3)
  • 33.617 (1)
  • 33.89 (1)
  • 34.69 (2)
  • 34.695 (1)
  • 34.705 (1)
  • 35.0 (3)
  • 35.558 (1)
  • 35.88 (1)
  • 36.75 (1)
  • 36.95 (1)
  • 36.951 (1)
  • 37.541 (1)
  • 37.75 (2)
  • 38.1 (3)
  • 38.95 (2)
  • 38.965 (1)
  • 39.16 (2)
  • 39.655 (2)
  • 42.0 (3)
  • 42.045 (1)
  • 44.6 (2)
  • 44.809 (1)
  • 45.11 (1)
  • 45.305 (1)
  • 45.308 (1)
  • 46.85 (2)
  • 47.35 (1)
  • 47.6 (1)
  • 47.615 (1)
  • 47.806 (1)
  • 47.807 (1)
  • 48.12 (1)
  • 48.25 (1)
  • 49.85 (2)
  • 49.947 (3)
  • 50.8 (2)
  • 52.0 (2)
  • 52.253 (1)
  • 52.254 (1)
  • 52.947 (3)
  • 56.034 (1)
  • 56.035 (1)
  • 57.81 (2)
  • 58.001 (1)
  • 59.37 (1)
  • 59.99 (1)
  • 60.83 (1)
  • 61.6 (2)
  • 61.801 (1)
  • 63.0 (1)
  • 63.5 (1)
  • 63.83 (1)
  • 64.612 (1)
  • 66.0 (1)
  • 75.968 (1)
  • 75.969 (1)
  • 76.2 (2)
  • 77.365 (2)
  • 77.565 (2)
  • 80.0 (2)
  • 81.6 (2)
  • 81.705 (1)
  • 83.305 (3)
  • 86.32 (1)
  • 100.0 (1)
  • 100.58 (1)
  • 100.928 (2)
  • 101.6 (1)
  • 102.925 (1)
  • 102.97 (1)
  • 106.6 (2)
  • 106.705 (1)
  • 108.458 (1)
  • 108.7 (1)
  • 108.704 (1)
  • 109.559 (1)
  • 128.015 (1)
  • 128.286 (1)
  • 133.858 (1)
  • 134.087 (1)
  • 134.5 (1)
  • 135.883 (1)
  • 136.95 (1)
  • 141.6 (1)
to
Cutting Diameter
  • 0.255 (2)
  • 0.299 (2)
  • 0.329 (1)
  • 0.35 (7)
  • 0.38 (2)
  • 0.39 (1)
  • 0.393 (1)
  • 0.398 (2)
  • 0.414 (1)
  • 0.417 (2)
  • 0.42 (1)
  • 0.427 (2)
  • 0.457 (1)
  • 0.461 (1)
  • 0.463 (2)
  • 0.4717 (3)
  • 0.485 (1)
  • 0.4874 (3)
  • 0.49 (1)
  • 0.492 (1)
  • 0.52 (1)
  • 0.529 (1)
  • 0.5361 (2)
  • 0.5458 (2)
  • 0.554 (1)
  • 0.561 (1)
  • 0.619 (1)
  • 0.622 (2)
  • 0.6291 (1)
  • 0.63 (3)
  • 0.631 (1)
  • 0.632 (3)
  • 0.6393 (1)
  • 0.641 (1)
  • 0.654 (2)
  • 0.6631 (1)
  • 0.6774 (1)
  • 0.692 (1)
  • 0.702 (1)
  • 0.7368 (1)
  • 0.7373 (1)
  • 0.738 (1)
  • 0.7384 (2)
  • 0.74 (2)
  • 0.746 (2)
  • 0.7466 (4)
  • 0.75 (1)
  • 0.77 (1)
  • 0.785 (2)
  • 0.7874 (3)
  • 0.8596 (1)
  • 0.8646 (2)
  • 0.869 (4)
  • 0.88 (2)
  • 0.883 (1)
  • 0.929 (2)
  • 0.938 (1)
  • 0.943 (1)
  • 0.98 (1)
  • 0.9843 (2)
  • 0.989 (1)
  • 1.0 (3)
  • 1.017 (1)
  • 1.0187 (1)
  • 1.021 (1)
  • 1.0265 (1)
  • 1.05 (1)
  • 1.053 (3)
  • 1.058 (1)
  • 1.0657 (1)
  • 1.067 (1)
  • 1.1057 (1)
  • 1.135 (1)
  • 1.1399 (1)
  • 1.182 (1)
  • 1.2431 (1)
  • 1.25 (2)
  • 1.2527 (1)
  • 1.2598 (3)
  • 1.26 (1)
  • 1.276 (3)
  • 1.2842 (1)
  • 1.323 (3)
  • 1.3235 (1)
  • 1.334 (1)
  • 1.3659 (1)
  • 1.366 (2)
  • 1.3663 (1)
  • 1.378 (3)
  • 1.3999 (1)
  • 1.413 (1)
  • 1.447 (1)
  • 1.4547 (1)
  • 1.4548 (1)
  • 1.478 (1)
  • 1.4862 (2)
  • 1.5 (3)
  • 1.5335 (2)
  • 1.5341 (1)
  • 1.5417 (2)
  • 1.5612 (2)
  • 1.6535 (3)
  • 1.6553 (1)
  • 1.756 (2)
  • 1.7641 (1)
  • 1.776 (1)
  • 1.7837 (1)
  • 1.7838 (1)
  • 1.845 (2)
  • 1.864 (1)
  • 1.874 (1)
  • 1.8746 (1)
  • 1.8821 (1)
  • 1.8822 (1)
  • 1.894 (1)
  • 1.899 (1)
  • 1.963 (2)
  • 1.9664 (3)
  • 2.0 (2)
  • 2.0472 (2)
  • 2.0572 (1)
  • 2.0573 (1)
  • 2.0845 (3)
  • 2.2061 (2)
  • 2.276 (2)
  • 2.2835 (1)
  • 2.337 (1)
  • 2.362 (1)
  • 2.395 (1)
  • 2.425 (2)
  • 2.4331 (1)
  • 2.48 (1)
  • 2.5 (1)
  • 2.513 (1)
  • 2.5438 (1)
  • 2.5984 (1)
  • 2.9909 (2)
  • 3.0 (2)
  • 3.0459 (2)
  • 3.0537 (2)
  • 3.1496 (1)
  • 3.15 (1)
  • 3.213 (2)
  • 3.2167 (1)
  • 3.2797 (3)
  • 3.398 (1)
  • 3.937 (1)
  • 3.96 (1)
  • 3.9735 (2)
  • 4.0 (1)
  • 4.0522 (1)
  • 4.054 (1)
  • 4.197 (2)
  • 4.201 (1)
  • 4.27 (1)
  • 4.2797 (1)
  • 4.28 (1)
  • 4.3134 (1)
  • 5.0399 (1)
  • 5.0506 (1)
  • 5.27 (1)
  • 5.279 (1)
  • 5.295 (1)
  • 5.3497 (1)
  • 5.392 (1)
  • 5.575 (1)
to
Cutting Length
  • 0.033 (5)
  • 0.035 (17)
  • 0.0354 (4)
  • 0.0394 (6)
  • 0.04 (14)
  • 0.058 (4)
  • 0.059 (42)
  • 0.0591 (42)
  • 0.06 (8)
  • 0.065 (3)
  • 0.087 (1)
  • 0.098 (39)
  • 0.0984 (34)
  • 0.1378 (25)
  • 0.138 (6)
to
Cutting Length
  • 0.84 (5)
  • 0.9 (21)
  • 1.0 (6)
  • 1.016 (2)
  • 1.02 (12)
  • 1.47 (2)
  • 1.5 (94)
  • 1.65 (3)
  • 2.22 (1)
  • 2.489 (3)
  • 2.5 (70)
  • 3.5 (30)
  • 3.501 (1)
to
Reach
  • 25.0 (4)
  • 25.4 (3)
  • 30.0 (3)
  • 32.0 (2)
  • 34.95 (1)
  • 35.0 (13)
  • 35.01 (1)
  • 35.33 (1)
  • 35.34 (1)
  • 39.8 (1)
  • 39.98 (1)
  • 40.0 (6)
  • 40.01 (1)
  • 42.9 (6)
  • 43.0 (15)
  • 43.002 (1)
  • 44.45 (1)
  • 44.94 (1)
  • 44.95 (2)
  • 44.98 (1)
  • 45.0 (7)
  • 45.02 (2)
  • 45.34 (2)
  • 50.0 (12)
  • 50.8 (4)
  • 55.32 (1)
  • 56.82 (1)
  • 56.94 (2)
  • 57.4 (1)
  • 59.9 (1)
  • 60.8 (1)
  • 69.977 (2)
  • 69.98 (1)
  • 70.0 (7)
  • 76.2 (4)
  • 101.6 (1)
  • 102.0 (4)
  • 120.65 (1)
to