Shoulder Milling

To achieve exact and consistent counters with shoulder milling, you must control vibrations while making a clean edge. At Kennametal Inc., our performance shoulder mills offer aggressive ramping rates for high-speed machining across all applications, including shoulder, ramp, slot, plunge and face milling. Our passion for excellence provides you with quality multi-task tools for general, repeated and flexible milling. 

Not only do Kennametal shoulder mills give you a true angle, but their durable construction and indexable inserts allow you to complete both standard and custom applications. Ultimately, with our high-performance shoulder mills, your applications always come out according to the correct specifications, allowing you to maintain a competitive edge in your fast-paced sector.

 

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (103)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (98)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (98)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (98)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (98)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (98)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (103)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (103)
  • M Stainless Steel (103)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (103)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (103)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (103)
  • K Cast Iron (94)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (94)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (94)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (94)
  • N Non-Ferrous Materials (65)
    • N1
      Wrought Aluminum (65)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (65)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (65)
  • S High-Temp Alloys (102)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (96)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (96)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (96)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (102)
  • H Hardened Materials (74)
    • H1
      Hardened Materials 44-48 HRC (74)
Select First Choice
  • BR (17)
  • CN (74)
  • DE (73)
  • GB (45)
  • IN (11)
  • SG (27)
  • US (65)
Applications
Applications
  • Face Milling Face Milling (63)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (63)
  • Shoulder Milling Shoulder Milling (63)
  • Shoulder Roughing Shoulder Roughing (63)
  • Shoulder Square End Shoulder Square End (63)
  • Slot Milling Slot Milling (10)
  • Slot Side Slot Side (10)
  • Slot Square End Slot Square End (10)
Cutting Diameter
Cutting Diameter
  • 0.625 in (3)
  • 0.63 in (4)
  • 0.75 in (6)
  • 0.787 in (6)
  • 0.984 in (5)
  • 1.0 in (7)
  • 1.25 in (5)
  • 1.26 in (6)
  • 1.5 in (3)
  • 1.575 in (5)
  • 1.969 in (3)
  • 2.0 in (2)
  • 2.48 in (2)
  • 2.5 in (2)
  • 3.0 in (2)
  • 3.15 in (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.875 mm (3)
  • 16.0 mm (4)
  • 19.05 mm (6)
  • 20.0 mm (6)
  • 25.0 mm (5)
  • 25.401 mm (7)
  • 31.75 mm (5)
  • 32.0 mm (6)
  • 38.1 mm (3)
  • 40.0 mm (5)
  • 50.0 mm (3)
  • 50.801 mm (2)
  • 63.0 mm (2)
  • 63.5 mm (2)
  • 76.2 mm (2)
  • 80.0 mm (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 11.0 mm (63)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.433 in (63)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.984 in (4)
  • 1.0 in (3)
  • 1.1 in (6)
  • 1.102 in (6)
  • 1.25 in (1)
  • 1.26 in (1)
  • 1.575 in (17)
  • 1.693 in (3)
  • 1.75 in (9)
  • 1.929 in (6)
  • 1.969 in (2)
  • 2.25 in (5)
Reach Min to Reach Max
Reach
Reach
  • 25.0 mm (4)
  • 25.401 mm (3)
  • 27.951 mm (6)
  • 28.0 mm (6)
  • 31.75 mm (1)
  • 32.0 mm (1)
  • 40.0 mm (17)
  • 43.0 mm (3)
  • 44.45 mm (9)
  • 49.0 mm (6)
  • 50.0 mm (2)
  • 57.151 mm (5)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (63)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (18)
  • Screw-On Connection (8)
  • Straight-Cylindrical (24)
  • Weldon (13)
Number of Flutes
Number of Flutes
  • 10 (1)
  • 2 (11)
  • 3 (13)
  • 4 (12)
  • 5 (12)
  • 6 (4)
  • 7 (5)
  • 8 (3)
  • 9 (2)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.575 in (14)
  • 1.681 in (1)
  • 1.75 in (2)
  • 1.889 in (1)
  • 1.891 in (1)
  • 1.969 in (2)
  • 2.116 in (1)
  • 2.441 in (1)
  • 2.539 in (2)
  • 2.715 in (1)
  • 2.906 in (1)
  • 2.914 in (1)
  • 3.11 in (2)
  • 3.13 in (2)
  • 3.504 in (1)
  • 3.543 in (2)
  • 3.781 in (1)
  • 3.938 in (1)
  • 4.0 in (2)
  • 4.03 in (1)
  • 4.331 in (3)
  • 4.5 in (2)
  • 4.53 in (2)
  • 5.0 in (2)
  • 5.906 in (3)
  • 6.0 in (3)
  • 6.694 in (2)
  • 7.0 in (2)
  • 7.875 in (3)
  • 8.0 in (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (14)
  • 42.7 mm (1)
  • 44.45 mm (2)
  • 47.95 mm (1)
  • 48.0 mm (1)
  • 50.0 mm (2)
  • 53.75 mm (1)
  • 62.0 mm (1)
  • 64.5 mm (2)
  • 68.95 mm (1)
  • 73.8 mm (1)
  • 74.0 mm (1)
  • 79.0 mm (2)
  • 79.5 mm (2)
  • 89.0 mm (1)
  • 90.0 mm (2)
  • 96.0 mm (1)
  • 100.0 mm (1)
  • 101.601 mm (2)
  • 102.351 mm (1)
  • 110.0 mm (3)
  • 114.301 mm (2)
  • 115.051 mm (2)
  • 127.0 mm (2)
  • 150.0 mm (3)
  • 152.4 mm (3)
  • 170.0 mm (2)
  • 177.8 mm (2)
  • 200.0 mm (3)
  • 203.201 mm (1)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.016 in (70)
  • 0.031 in (91)
  • 0.047 in (76)
  • 0.063 in (72)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (70)
  • 0.8 mm (91)
  • 1.201 mm (76)
  • 1.6 mm (72)
Corner Radius Min to Corner Radius Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KC422M (65)
  • KC520M (68)
  • KC522M (72)
  • KC725M (69)
  • KCK15 (69)
  • KCK20B (67)
  • KCPK30 (69)
  • KCPM20 (64)
  • KCPM40 (75)
  • KCSM30 (64)
  • KCSM40 (68)
Hand Of Tool
Hand Of Tool
  • R (63)
Wiper Insert
Wiper Insert
  • N (57)
Front-End
Neck Diameter
Neck Diameter
  • 0.74 in (1)
  • 1.23 in (1)
  • 1.24 in (2)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 18.8 mm (1)
  • 31.25 mm (1)
  • 31.5 mm (2)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
Insert Geometry
Shape
Shape
  • X-RECTANGLE MILL 4 90 (57)
Cutting Edge Length
Cutting Edge Length
  • 12.101 mm (20)
  • 12.175 mm (37)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.477 in (20)
  • 0.48 in (37)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • GE (40)
  • GEM (15)
  • LE (2)
Cutting Tool Material
Cutting Tool Material
  • H W (57)
Tolerance Class
Tolerance Class
  • G (37)
  • P (20)
Back-End
Connection Type
Connection Type
  • CYLINDRICAL (37)
  • SCREW-ON (8)
  • SHELL MILL (18)
Back-End Diameter
Back-End Diameter
  • 12.701 mm (2)
  • 13.0 mm (1)
  • 15.875 mm (3)
  • 16.0 mm (6)
  • 18.0 mm (2)
  • 19.0 mm (1)
  • 19.05 mm (9)
  • 20.0 mm (5)
  • 21.0 mm (2)
  • 22.0 mm (5)
  • 25.0 mm (4)
  • 25.401 mm (7)
  • 27.0 mm (2)
  • 29.0 mm (3)
  • 31.75 mm (5)
  • 32.0 mm (6)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.5 in (2)
  • 0.512 in (1)
  • 0.625 in (3)
  • 0.63 in (6)
  • 0.709 in (2)
  • 0.748 in (1)
  • 0.75 in (9)
  • 0.787 in (5)
  • 0.828 in (2)
  • 0.866 in (5)
  • 0.984 in (4)
  • 1.0 in (7)
  • 1.063 in (2)
  • 1.143 in (3)
  • 1.25 in (5)
  • 1.26 in (6)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Thank you for your successful registration. You now have immediate access to log in and utilize the site.

You are about to leave the Solution building process.

Are you sure you want to leave?