Mill 1-10™ • Two Cutting Edges • Ap1 max 10mm

The Mill 1-10 premium shoulder milling tooling systems are engineered for precision facing, ramping, lettering, plunging, side, and trochoidal milling. Whether it's light, medium, or heavy machining tasks, the Mill 1-10 shoulder mills offer efficiency while at the same time maintaining exceptional quality and cost savings. Mill 1-10 inserts feature an innovative margin that is along the main cutting corner nose radius and wiper facet for great edge stability. Their high axial and radial rakes are ideal for soft cutting action and reduced cutting forces. Available for machining several material groups including aluminum and for use with helical or standard Mill 1-10 cutters.

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (226)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (209)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (209)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (209)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (209)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (211)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (224)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (224)
  • M Stainless Steel (217)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (217)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (217)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (217)
  • K Cast Iron (191)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (191)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (190)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (190)
  • N Non-Ferrous Materials (146)
    • N1
      Wrought Aluminum (146)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (145)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (145)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (118)
  • S High-Temp Alloys (217)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (195)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (195)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (195)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (217)
  • H Hardened Materials (148)
    • H1
      Hardened Materials 44-48 HRC (148)
Select First Choice
  • BR (15)
  • CN (111)
  • DE (113)
  • GB (63)
  • IN (29)
  • SG (46)
  • US (98)
Applications
Applications
  • Face Milling Face Milling (129)
  • Pocket Pocket (129)
  • Pocket Helical Pocket Helical (129)
  • Pocket Milling Pocket Milling (129)
  • Ramping Ramping (129)
  • Shoulder Milling Shoulder Milling (129)
  • Shoulder Roughing Shoulder Roughing (129)
  • Shoulder Square End Shoulder Square End (129)
  • Slot Milling Slot Milling (82)
  • Slot Square End Slot Square End (82)
Cutting Diameter
Cutting Diameter
  • 0.473 in (1)
  • 0.5 in (1)
  • 0.625 in (5)
  • 0.63 in (5)
  • 0.709 in (1)
  • 0.75 in (11)
  • 0.787 in (14)
  • 0.866 in (1)
  • 0.875 in (1)
  • 0.984 in (14)
  • 1.0 in (16)
  • 1.1 in (1)
  • 1.102 in (1)
  • 1.25 in (13)
  • 1.26 in (14)
  • 1.5 in (5)
  • 1.575 in (5)
  • 1.655 in (1)
  • 1.969 in (4)
  • 2.0 in (4)
  • 2.48 in (2)
  • 2.5 in (2)
  • 3.0 in (2)
  • 3.15 in (2)
  • 3.938 in (2)
  • 4.0 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 12.0 mm (1)
  • 12.701 mm (1)
  • 15.875 mm (5)
  • 16.0 mm (5)
  • 18.0 mm (1)
  • 19.05 mm (11)
  • 20.0 mm (14)
  • 22.0 mm (1)
  • 22.225 mm (1)
  • 25.0 mm (14)
  • 25.401 mm (16)
  • 27.951 mm (1)
  • 28.0 mm (1)
  • 31.75 mm (13)
  • 32.0 mm (14)
  • 38.1 mm (5)
  • 40.0 mm (5)
  • 42.0 mm (1)
  • 50.0 mm (4)
  • 50.801 mm (4)
  • 63.0 mm (2)
  • 63.5 mm (2)
  • 76.2 mm (2)
  • 80.0 mm (2)
  • 100.0 mm (2)
  • 101.601 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 9.675 mm (1)
  • 9.701 mm (2)
  • 9.726 mm (1)
  • 9.75 mm (3)
  • 9.775 mm (2)
  • 9.8 mm (1)
  • 9.826 mm (2)
  • 9.875 mm (15)
  • 9.9 mm (1)
  • 9.925 mm (4)
  • 9.951 mm (18)
  • 10.0 mm (2)
  • 10.025 mm (18)
  • 10.05 mm (12)
  • 10.076 mm (7)
  • 10.101 mm (10)
  • 10.25 mm (2)
  • 18.675 mm (3)
  • 18.8 mm (3)
  • 18.925 mm (3)
  • 27.75 mm (2)
  • 27.776 mm (1)
  • 35.926 mm (1)
  • 35.95 mm (1)
  • 36.0 mm (2)
  • 36.375 mm (3)
  • 44.325 mm (4)
  • 44.776 mm (3)
  • 44.801 mm (2)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.381 in (1)
  • 0.382 in (2)
  • 0.383 in (1)
  • 0.384 in (3)
  • 0.385 in (2)
  • 0.386 in (1)
  • 0.387 in (2)
  • 0.389 in (15)
  • 0.39 in (1)
  • 0.391 in (4)
  • 0.392 in (18)
  • 0.394 in (2)
  • 0.395 in (18)
  • 0.396 in (12)
  • 0.397 in (7)
  • 0.398 in (10)
  • 0.404 in (2)
  • 0.735 in (3)
  • 0.74 in (3)
  • 0.745 in (3)
  • 1.093 in (2)
  • 1.094 in (1)
  • 1.414 in (1)
  • 1.415 in (1)
  • 1.417 in (2)
  • 1.432 in (3)
  • 1.745 in (4)
  • 1.764 in (5)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.787 in (1)
  • 0.8 in (1)
  • 0.972 in (1)
  • 0.984 in (4)
  • 0.987 in (1)
  • 0.999 in (1)
  • 1.0 in (3)
  • 1.053 in (2)
  • 1.1 in (6)
  • 1.102 in (9)
  • 1.239 in (1)
  • 1.249 in (2)
  • 1.25 in (13)
  • 1.26 in (11)
  • 1.393 in (1)
  • 1.417 in (2)
  • 1.5 in (3)
  • 1.564 in (2)
  • 1.575 in (24)
  • 1.589 in (2)
  • 1.6 in (7)
  • 1.614 in (2)
  • 1.75 in (2)
  • 1.79 in (1)
  • 1.811 in (2)
  • 1.879 in (2)
  • 1.889 in (1)
  • 1.891 in (2)
  • 1.901 in (2)
  • 1.969 in (6)
  • 2.0 in (3)
  • 2.091 in (2)
  • 2.126 in (3)
  • 2.362 in (2)
  • 2.4 in (2)
Reach Min to Reach Max
Reach
Reach
  • 20.0 mm (1)
  • 20.326 mm (1)
  • 24.701 mm (1)
  • 25.0 mm (4)
  • 25.076 mm (1)
  • 25.375 mm (1)
  • 25.401 mm (3)
  • 26.75 mm (2)
  • 27.951 mm (6)
  • 28.0 mm (9)
  • 31.475 mm (1)
  • 31.725 mm (2)
  • 31.75 mm (13)
  • 32.0 mm (11)
  • 35.35 mm (1)
  • 36.0 mm (2)
  • 38.1 mm (3)
  • 39.725 mm (2)
  • 40.0 mm (24)
  • 40.35 mm (2)
  • 40.651 mm (7)
  • 41.0 mm (2)
  • 44.45 mm (2)
  • 45.475 mm (1)
  • 46.0 mm (2)
  • 47.725 mm (2)
  • 47.975 mm (1)
  • 48.0 mm (2)
  • 48.25 mm (2)
  • 50.0 mm (6)
  • 50.801 mm (3)
  • 53.1 mm (2)
  • 54.0 mm (3)
  • 60.0 mm (2)
  • 60.95 mm (2)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (129)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (25)
  • B-Cutter Retention Screw (2)
  • Screw-On Connection (22)
  • Straight-Cylindrical (56)
  • Weldon (24)
Number of Flutes
Number of Flutes
  • 1 (2)
  • 10 (2)
  • 12 (1)
  • 2 (35)
  • 3 (33)
  • 4 (25)
  • 5 (16)
  • 6 (7)
  • 8 (6)
  • 9 (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (119)
  • 2.0 (253)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.575 in (12)
  • 1.655 in (1)
  • 1.669 in (1)
  • 1.75 in (2)
  • 1.848 in (2)
  • 1.85 in (2)
  • 1.969 in (6)
  • 2.0 in (3)
  • 2.008 in (1)
  • 2.116 in (2)
  • 2.126 in (3)
  • 2.362 in (2)
  • 2.4 in (2)
  • 2.406 in (3)
  • 2.48 in (5)
  • 2.52 in (2)
  • 2.914 in (1)
  • 3.031 in (1)
  • 3.11 in (2)
  • 3.13 in (2)
  • 3.281 in (2)
  • 3.422 in (1)
  • 3.426 in (1)
  • 3.5 in (1)
  • 3.504 in (2)
  • 3.531 in (2)
  • 3.543 in (1)
  • 3.551 in (1)
  • 3.88 in (2)
  • 3.938 in (1)
  • 3.976 in (2)
  • 4.0 in (1)
  • 4.055 in (1)
  • 4.071 in (1)
  • 4.134 in (1)
  • 4.331 in (3)
  • 4.37 in (2)
  • 4.407 in (1)
  • 4.5 in (2)
  • 4.529 in (3)
  • 4.724 in (2)
  • 4.734 in (1)
  • 4.8 in (5)
  • 5.118 in (2)
  • 5.2 in (2)
  • 6.681 in (1)
  • 6.682 in (2)
  • 6.688 in (1)
  • 6.689 in (1)
  • 6.694 in (5)
  • 6.7 in (4)
  • 7.863 in (4)
  • 7.875 in (5)
  • 7.989 in (3)
  • 8.0 in (5)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (12)
  • 42.0 mm (1)
  • 42.401 mm (1)
  • 44.45 mm (2)
  • 46.95 mm (2)
  • 47.0 mm (2)
  • 50.0 mm (6)
  • 50.801 mm (3)
  • 51.0 mm (1)
  • 53.75 mm (2)
  • 54.0 mm (3)
  • 60.0 mm (2)
  • 60.95 mm (2)
  • 61.1 mm (3)
  • 63.0 mm (5)
  • 64.0 mm (2)
  • 74.0 mm (1)
  • 76.95 mm (1)
  • 79.0 mm (2)
  • 79.5 mm (2)
  • 83.325 mm (2)
  • 86.926 mm (1)
  • 87.0 mm (1)
  • 88.9 mm (1)
  • 89.0 mm (2)
  • 89.676 mm (2)
  • 90.0 mm (1)
  • 90.2 mm (1)
  • 98.551 mm (2)
  • 100.0 mm (1)
  • 101.0 mm (2)
  • 101.601 mm (1)
  • 103.0 mm (1)
  • 103.4 mm (1)
  • 105.0 mm (1)
  • 110.0 mm (3)
  • 111.0 mm (2)
  • 111.926 mm (1)
  • 114.301 mm (2)
  • 115.0 mm (3)
  • 120.0 mm (2)
  • 120.25 mm (1)
  • 121.926 mm (5)
  • 130.0 mm (2)
  • 132.076 mm (2)
  • 169.701 mm (1)
  • 169.726 mm (2)
  • 169.875 mm (1)
  • 169.9 mm (1)
  • 170.0 mm (5)
  • 170.175 mm (4)
  • 199.726 mm (4)
  • 200.0 mm (5)
  • 202.925 mm (3)
  • 203.201 mm (5)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.008 in (121)
  • 0.016 in (139)
  • 0.031 in (150)
  • 0.039 in (121)
  • 0.047 in (137)
  • 0.063 in (135)
  • 0.079 in (124)
  • 0.094 in (124)
  • 0.122 in (140)
  • 0.157 in (129)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (121)
  • 0.4 mm (139)
  • 0.8 mm (150)
  • 1.0 mm (121)
  • 1.201 mm (137)
  • 1.6 mm (135)
  • 2.0 mm (124)
  • 2.375 mm (124)
  • 3.1 mm (140)
  • 4.0 mm (129)
Corner Radius Min to Corner Radius Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K313 (130)
  • KC410M (136)
  • KC422M (134)
  • KC510M (118)
  • KC520M (136)
  • KC522M (144)
  • KC725M (154)
  • KCK15 (124)
  • KCK20B (124)
  • KCKP10 (118)
  • KCPK30 (151)
  • KCPM20 (130)
  • KCPM40 (138)
  • KCSM30 (130)
  • KCSM40 (144)
  • KD1410 (119)
Hand Of Tool
Hand Of Tool
  • R (128)
  • R - Right Hand Helix/Flute (1)
Wiper Insert
Wiper Insert
  • N (126)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.5 (3)
  • 0.75 (4)
  • 1.0 (4)
  • 1.5 (8)
  • 1.75 (1)
  • 2.0 (13)
  • 2.5 (12)
  • 2.75 (12)
  • 3.0 (4)
  • 3.25 (2)
  • 4.0 (26)
  • 4.5 (2)
  • 5.0 (2)
  • 5.25 (1)
  • 6.0 (12)
  • 6.5 (10)
  • 7.5 (1)
  • 8.0 (2)
  • 9.5 (8)
  • 11.5 (2)
Maximum Ramp Angle Min