90° SN Slotting Cutters

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (35)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (32)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (32)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (32)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (32)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (35)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (32)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (32)
  • M Stainless Steel (32)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (32)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (32)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (32)
  • K Cast Iron (23)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (23)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (23)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (23)
  • N Non-Ferrous Materials (18)
    • N1
      Wrought Aluminum (18)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (18)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (18)
  • S High-Temp Alloys (32)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (27)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (27)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (27)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (32)
  • H Hardened Materials (14)
    • H1
      Hardened Materials 44-48 HRC (14)
Applications
Applications
  • Slot Milling Slot Milling (14)
  • Slot Side Slot Side (14)
Cutting Diameter
Cutting Diameter
  • 3.15 in (1)
  • 3.938 in (3)
  • 4.921 in (4)
  • 6.299 in (3)
  • 7.875 in (1)
  • 9.843 in (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 80.0 mm (1)
  • 100.0 mm (3)
  • 125.0 mm (4)
  • 160.0 mm (3)
  • 200.0 mm (1)
  • 250.0 mm (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 4.0 mm (4)
  • 5.0 mm (3)
  • 6.0 mm (2)
  • 8.0 mm (2)
  • 10.0 mm (2)
  • 12.0 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.157 in (4)
  • 0.197 in (3)
  • 0.237 in (2)
  • 0.315 in (2)
  • 0.394 in (2)
  • 0.473 in (1)
Cutting Length Min to Cutting Length Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (14)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • 2 Key & Cutter Retention Screw (14)
Number of Flutes
Number of Flutes
  • 12 (1)
  • 4 (1)
  • 5 (2)
  • 6 (4)
  • 7 (2)
  • 8 (2)
  • 9 (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 4.0 (39)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Radius
Corner Radius
  • 0.0 in (39)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (39)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (39)
  • 0.151 mm (4)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (39)
  • 0.006 in (4)
Corner Chamfer Min to Corner Chamfer Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K110M (15)
  • K125M (11)
  • KC510M (14)
  • KC520M (8)
  • KC725M (21)
  • KC735M (11)
  • KC792M (8)
  • KC920M (11)
  • KC925M (11)
  • KC930M (11)
  • KC935M (7)
  • KCK15 (4)
  • KCPK30 (13)
  • KCPM40 (17)
  • TN5515 (4)
Hand Of Tool
Hand Of Tool
  • N (14)
Wiper Insert
Wiper Insert
  • N (28)
Front-End
Cutting Width
Cutting Width
  • 0.157 in (4)
  • 0.197 in (3)
  • 0.237 in (2)
  • 0.315 in (2)
  • 0.394 in (2)
  • 0.473 in (1)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 4.0 mm (4)
  • 5.0 mm (3)
  • 6.0 mm (2)
  • 8.0 mm (2)
  • 10.0 mm (2)
  • 12.0 mm (1)
Cutting Width Min to Cutting Width Max
Insert Shape
Insert Shape
  • S-SQUARE 90 (4)
  • S-SQUARE ON EDGE 90 (39)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.591 in (1)
  • 0.984 in (3)
  • 1.181 in (4)
  • 1.732 in (3)
  • 2.441 in (1)
  • 3.386 in (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 15.0 mm (1)
  • 25.0 mm (3)
  • 30.0 mm (4)
  • 44.0 mm (3)
  • 62.0 mm (1)
  • 86.0 mm (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Shape
Shape
  • S-SQUARE ON EDGE 90 (28)
Insert IC Size
Insert IC Size
  • 11.0 mm (12)
  • 12.701 mm (16)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.433 in (12)
  • 0.5 in (16)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 11.0 mm (12)
  • 12.701 mm (16)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.433 in (12)
  • 0.5 in (16)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • GE (4)
  • GP (14)
Cutting Tool Material
Cutting Tool Material
  • H W (28)
Tolerance Class
Tolerance Class
  • H (28)
Back-End
Connection Type
Connection Type
  • ARBOR (14)
Back-End Diameter
Back-End Diameter
  • 27.0 mm (4)
  • 40.0 mm (7)
  • 50.0 mm (3)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 1.063 in (4)
  • 1.575 in (7)
  • 1.969 in (3)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?