successfully added to cart
View Cart

Notifications

Mark all as read

Kennametal Solid Carbide End Mills are designed to perform in the most demanding environments.  Whether you're looking for an end mill for aluminum, titanium, stainless steel, or different materials, our end mills will provide you with the ultimate MRR and durability. Kennametal Solid Carbide End Mills run longer, cut faster, and machine with greater precision.

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (3547)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2711)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2711)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2748)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2955)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (3372)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2720)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (2163)
  • M Stainless Steel (3161)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (3161)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (3161)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2444)
  • K Cast Iron (2764)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (2764)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (2764)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (2091)
  • N Non-Ferrous Materials (844)
    • N1
      Wrought Aluminum
      (813)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (813)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (581)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (716)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (292)
    • N6
      Carbon, Graphite Composites, CFRP
      (96)
    • N7
      MMC's
      (78)
  • S High-Temp Alloys (2180)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (2126)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (2078)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (2143)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (2064)
  • H Hardened Materials (2773)
    • H1
      Hardened Materials 44-48 HRC
      (2761)
    • H2
      Hardened Materials 48-55 HRC
      (1331)
    • H3
      Hardened Materials 56-60 HRC
      (256)
    • H4
      Hardened Materials >60 HRC
      (191)
  • C CFRP Materials (31)
    • C1
      CFRP, CFRP / CFRP
      (31)
Select First Choice
  • BR (91)
  • CN (365)
  • DE (598)
  • GB (273)
  • IN (75)
  • SG (183)
  • US (998)
Applications
Applications
  • Chamfer Milling Chamfer Milling (12)
  • Concave Radius Milling Concave Radius Milling (14)
  • Drilling Drilling (247)
  • Face Milling Face Milling (1586)
  • Pocket Pocket (3577)
  • Pocket Helical Pocket Helical (3704)
  • Pocket Milling Pocket Milling (3750)
  • Pocket Plunge Milling Pocket Plunge Milling (1291)
  • Profile Milling Profile Milling (527)
  • Ramping Ramping (3509)
  • Shoulder Ball Nose Shoulder Ball Nose (755)
  • Shoulder Milling Shoulder Milling (3943)
  • Shoulder Roughing Shoulder Roughing (1741)
  • Shoulder Square End Shoulder Square End (3524)
  • Slot Ball Nose Slot Ball Nose (362)
  • Slot Milling Slot Milling (2882)
  • Slot Square End Slot Square End (2642)
  • Trochoidal Milling Trochoidal Milling (897)
Cutting Diameter
Cutting Diameter
  • 0.0118 in (2)
  • 0.0156 in (2)
  • 0.0157 in (2)
  • 0.0197 in (5)
  • 0.0236 in (5)
  • 0.0312 in (2)
  • 0.0313 in (3)
  • 0.0315 in (5)
  • 0.0394 in (11)
  • 0.0469 in (3)
  • 0.0472 in (4)
  • 0.0551 in (2)
  • 0.0591 in (9)
  • 0.0625 in (9)
  • 0.063 in (3)
  • 0.0709 in (4)
  • 0.0781 in (8)
  • 0.0787 in (38)
  • 0.079 in (3)
  • 0.0938 in (14)
  • 0.0984 in (23)
  • 0.1094 in (6)
  • 0.1102 in (3)
  • 0.118 in (3)
  • 0.1181 in (50)
  • 0.125 in (53)
  • 0.1378 in (18)
  • 0.1406 in (4)
  • 0.1496 in (3)
  • 0.1562 in (8)
  • 0.1563 in (6)
  • 0.157 in (5)
  • 0.1575 in (83)
  • 0.1719 in (2)
  • 0.1772 in (8)
  • 0.1875 in (68)
  • 0.188 in (2)
  • 0.189 in (3)
  • 0.1969 in (65)
  • 0.197 in (4)
  • 0.2031 in (3)
  • 0.2165 in (6)
  • 0.2188 in (13)
  • 0.2264 in (3)
  • 0.2344 in (3)
  • 0.236 in (7)
  • 0.2362 in (133)
  • 0.25 in (167)
  • 0.2656 in (2)
  • 0.2756 in (17)
  • 0.2812 in (5)
  • 0.2813 in (5)
  • 0.2969 in (2)
  • 0.3051 in (3)
  • 0.3125 in (82)
  • 0.313 in (2)
  • 0.315 in (150)
  • 0.3281 in (2)
  • 0.3438 in (5)
  • 0.3543 in (11)
  • 0.3594 in (2)
  • 0.375 in (260)
  • 0.3819 in (6)
  • 0.3906 in (2)
  • 0.3937 in (232)
  • 0.394 in (7)
  • 0.4062 in (4)
  • 0.4219 in (2)
  • 0.437 in (2)
  • 0.4375 in (34)
  • 0.438 in (2)
  • 0.4531 in (2)
  • 0.4606 in (4)
  • 0.4688 in (2)
  • 0.472 in (8)
  • 0.4724 in (254)
  • 0.4844 in (2)
  • 0.5 in (414)
  • 0.5394 in (4)
  • 0.551 in (5)
  • 0.5512 in (61)
  • 0.5625 in (17)
  • 0.6181 in (4)
  • 0.625 in (242)
  • 0.6287 in (3)
  • 0.6299 in (217)
  • 0.63 in (42)
  • 0.6875 in (4)
  • 0.6969 in (3)
  • 0.7087 in (41)
  • 0.75 in (368)
  • 0.7756 in (4)
  • 0.787 in (2)
  • 0.7874 in (234)
  • 0.875 in (12)
  • 0.9843 in (153)
  • 1.0 in (327)
  • 1.25 in (89)
  • 1.2598 in (14)
  • 1.5 in (7)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.3 mm (2)
  • 0.397 mm (2)
  • 0.4 mm (2)
  • 0.5 mm (5)
  • 0.6 mm (5)
  • 0.794 mm (5)
  • 0.8 mm (5)
  • 1.0 mm (11)
  • 1.1906 mm (1)
  • 1.191 mm (2)
  • 1.2 mm (4)
  • 1.4 mm (2)
  • 1.5 mm (9)
  • 1.588 mm (9)
  • 1.6 mm (3)
  • 1.8 mm (4)
  • 1.984 mm (8)
  • 2.0 mm (41)
  • 2.381 mm (12)
  • 2.3813 mm (1)
  • 2.383 mm (1)
  • 2.39 mm (1)
  • 2.5 mm (23)
  • 2.778 mm (6)
  • 2.8 mm (3)
  • 3.0 mm (53)
  • 3.175 mm (51)
  • 3.18 mm (2)
  • 3.5 mm (18)
  • 3.572 mm (4)
  • 3.8 mm (3)
  • 3.96 mm (2)
  • 3.9688 mm (1)
  • 3.969 mm (11)
  • 3.97 mm (1)
  • 4.0 mm (88)
  • 4.366 mm (2)
  • 4.5 mm (8)
  • 4.7625 mm (4)
  • 4.763 mm (63)
  • 4.78 mm (2)
  • 4.8 mm (3)
  • 5.0 mm (69)
  • 5.159 mm (3)
  • 5.5 mm (6)
  • 5.556 mm (13)
  • 5.75 mm (3)
  • 5.953 mm (3)
  • 6.0 mm (140)
  • 6.35 mm (167)
  • 6.747 mm (2)
  • 7.0 mm (17)
  • 7.144 mm (9)
  • 7.541 mm (2)
  • 7.75 mm (3)
  • 7.9375 mm (8)
  • 7.938 mm (76)
  • 8.0 mm (150)
  • 8.334 mm (2)
  • 8.731 mm (5)
  • 9.0 mm (11)
  • 9.128 mm (2)
  • 9.52 mm (4)
  • 9.525 mm (254)
  • 9.53 mm (2)
  • 9.7 mm (6)
  • 9.922 mm (2)
  • 10.0 mm (239)
  • 10.319 mm (4)
  • 10.716 mm (2)
  • 11.1 mm (2)
  • 11.112 mm (2)
  • 11.1125 mm (2)
  • 11.113 mm (32)
  • 11.509 mm (2)
  • 11.7 mm (4)
  • 11.906 mm (2)
  • 12.0 mm (263)
  • 12.303 mm (2)
  • 12.7 mm (414)
  • 13.7 mm (4)
  • 14.0 mm (66)
  • 14.288 mm (17)
  • 15.7 mm (4)
  • 15.875 mm (242)
  • 15.968 mm (3)
  • 16.0 mm (259)
  • 17.462 mm (3)
  • 17.7 mm (3)
  • 18.0 mm (41)
  • 19.05 mm (368)
  • 19.7 mm (4)
  • 20.0 mm (236)
  • 22.225 mm (12)
  • 25.0 mm (153)
  • 25.4 mm (327)
  • 31.75 mm (89)
  • 32.0 mm (14)
  • 38.1 mm (7)
  • 40.0 mm (2)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 7.455 mm (1)
  • 7.636 mm (1)
  • 7.9375 mm (1)
  • 8.626 mm (1)
  • 9.026 mm (1)
  • 9.255 mm (1)
  • 9.615 mm (1)
  • 11.096 mm (1)
  • 11.454 mm (1)
  • 11.614 mm (1)
  • 12.098 mm (1)
  • 13.454 mm (1)
  • 14.625 mm (1)
  • 14.795 mm (1)
  • 14.829 mm (1)
  • 14.937 mm (1)
  • 14.942 mm (1)
  • 15.09 mm (1)
  • 15.17 mm (1)
  • 15.255 mm (1)
  • 15.265 mm (1)
  • 15.361 mm (1)
  • 15.454 mm (1)
  • 25.4 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.2935 in (1)
  • 0.3006 in (1)
  • 0.3125 in (1)
  • 0.3396 in (1)
  • 0.3554 in (1)
  • 0.3644 in (1)
  • 0.3785 in (1)
  • 0.4369 in (1)
  • 0.451 in (1)
  • 0.4573 in (1)
  • 0.4763 in (1)
  • 0.5297 in (1)
  • 0.5758 in (1)
  • 0.5825 in (1)
  • 0.5838 in (1)
  • 0.5881 in (1)
  • 0.5883 in (1)
  • 0.5941 in (1)
  • 0.5973 in (1)
  • 0.6006 in (1)
  • 0.601 in (1)
  • 0.6048 in (1)
  • 0.6084 in (1)
  • 1.0 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.4 mm (3)
  • 0.53 mm (3)
  • 0.63 mm (3)
  • 0.84 mm (3)
  • 1.0 mm (4)
  • 1.05 mm (3)
  • 1.2 mm (3)
  • 1.5 mm (10)
  • 1.524 mm (3)
  • 1.6 mm (4)
  • 1.8 mm (3)
  • 1.984 mm (5)
  • 2.0 mm (16)
  • 2.4 mm (3)
  • 2.5 mm (3)
  • 3.0 mm (21)
  • 3.175 mm (7)
  • 4.0 mm (40)
  • 4.762 mm (11)
  • 4.763 mm (6)
  • 5.0 mm (36)
  • 6.0 mm (50)
  • 6.3 mm (6)
  • 6.35 mm (21)
  • 7.0 mm (31)
  • 7.144 mm (5)
  • 7.5 mm (5)
  • 7.541 mm (4)
  • 7.938 mm (14)
  • 8.0 mm (59)
  • 9.0 mm (39)
  • 9.5 mm (4)
  • 9.525 mm (57)
  • 10.0 mm (51)
  • 11.0 mm (40)
  • 11.113 mm (6)
  • 12.0 mm (71)
  • 12.7 mm (100)
  • 13.0 mm (79)
  • 14.0 mm (21)
  • 14.288 mm (47)
  • 15.0 mm (85)
  • 15.875 mm (138)
  • 15.88 mm (7)
  • 16.0 mm (66)
  • 18.0 mm (93)
  • 19.0 mm (53)
  • 19.05 mm (191)
  • 20.0 mm (29)
  • 20.638 mm (12)
  • 22.0 mm (91)
  • 22.225 mm (71)
  • 22.23 mm (5)
  • 23.812 mm (20)
  • 23.813 mm (15)
  • 24.0 mm (107)
  • 25.0 mm (22)
  • 25.4 mm (212)
  • 26.0 mm (124)
  • 28.0 mm (7)
  • 28.575 mm (84)
  • 30.0 mm (104)
  • 31.7 mm (4)
  • 31.75 mm (204)
  • 32.0 mm (134)
  • 34.925 mm (4)
  • 36.0 mm (26)
  • 37.5 mm (53)
  • 38.0 mm (96)
  • 38.1 mm (275)
  • 40.0 mm (17)
  • 41.27 mm (5)
  • 41.275 mm (46)
  • 41.28 mm (12)
  • 44.45 mm (39)
  • 45.0 mm (76)
  • 47.625 mm (36)
  • 48.0 mm (32)
  • 50.0 mm (13)
  • 50.8 mm (89)
  • 56.0 mm (8)
  • 57.15 mm (123)
  • 60.0 mm (28)
  • 63.5 mm (35)
  • 66.675 mm (6)
  • 75.0 mm (30)
  • 76.2 mm (103)
  • 79.375 mm (9)
  • 80.0 mm (10)
  • 82.55 mm (15)
  • 88.9 mm (14)
  • 95.25 mm (9)
  • 100.0 mm (10)
  • 101.6 mm (52)
  • 114.3 mm (10)
  • 125.0 mm (9)
  • 127.0 mm (24)
  • 139.7 mm (6)
  • 152.4 mm (11)
  • 165.1 mm (9)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.0394 in (4)
  • 0.0591 in (10)
  • 0.063 in (4)
  • 0.0781 in (5)
  • 0.0787 in (16)
  • 0.1181 in (21)
  • 0.125 in (7)
  • 0.1563 in (7)
  • 0.157 in (4)
  • 0.1575 in (36)
  • 0.1875 in (17)
  • 0.1969 in (32)
  • 0.197 in (4)
  • 0.2362 in (49)
  • 0.248 in (6)
  • 0.25 in (21)
  • 0.2656 in (4)
  • 0.2756 in (25)
  • 0.276 in (6)
  • 0.2953 in (4)
  • 0.2969 in (4)
  • 0.3125 in (14)
  • 0.315 in (59)
  • 0.3281 in (4)
  • 0.3543 in (38)
  • 0.374 in (4)
  • 0.375 in (56)
  • 0.3937 in (51)
  • 0.433 in (10)
  • 0.4331 in (30)
  • 0.4375 in (11)
  • 0.4724 in (71)
  • 0.4844 in (5)
  • 0.5 in (101)
  • 0.5118 in (72)
  • 0.512 in (6)
  • 0.5512 in (20)
  • 0.5625 in (48)
  • 0.5906 in (79)
  • 0.591 in (5)
  • 0.625 in (146)
  • 0.6299 in (66)
  • 0.7087 in (83)
  • 0.709 in (11)
  • 0.748 in (51)
  • 0.75 in (193)
  • 0.7874 in (29)
  • 0.8125 in (15)
  • 0.8661 in (91)
  • 0.875 in (76)
  • 0.9375 in (35)
  • 0.9449 in (104)
  • 0.9843 in (22)
  • 1.0 in (212)
  • 1.0236 in (118)
  • 1.024 in (6)
  • 1.1024 in (7)
  • 1.125 in (84)
  • 1.181 in (6)
  • 1.1811 in (98)
  • 1.25 in (208)
  • 1.2598 in (134)
  • 1.417 in (11)
  • 1.4173 in (16)
  • 1.4764 in (53)
  • 1.4961 in (96)
  • 1.5 in (275)
  • 1.5748 in (14)
  • 1.625 in (63)
  • 1.75 in (39)
  • 1.7717 in (76)
  • 1.875 in (36)
  • 1.8898 in (27)
  • 1.89 in (5)
  • 1.9685 in (9)
  • 2.0 in (89)
  • 2.2047 in (8)
  • 2.25 in (123)
  • 2.36 in (5)
  • 2.3622 in (19)
  • 2.5 in (35)
  • 2.625 in (7)
  • 2.95 in (5)
  • 2.9528 in (25)
  • 3.0 in (103)
  • 3.125 in (10)
  • 3.1496 in (5)
  • 3.15 in (5)
  • 3.25 in (15)
  • 3.5 in (14)
  • 3.75 in (9)
  • 3.937 in (5)
  • 3.94 in (5)
  • 4.0 in (52)
  • 4.5 in (10)
  • 4.9213 in (5)
  • 5.0 in (24)
  • 5.5 in (6)
  • 6.0 in (11)
  • 6.5 in (9)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.1772 in (5)
  • 0.1969 in (6)
  • 0.2362 in (8)
  • 0.25 in (9)
  • 0.3125 in (7)
  • 0.315 in (11)
  • 0.354 in (5)
  • 0.3543 in (7)
  • 0.375 in (20)
  • 0.3937 in (9)
  • 0.433 in (7)
  • 0.4375 in (6)
  • 0.4724 in (23)
  • 0.5 in (56)
  • 0.5118 in (22)
  • 0.512 in (6)
  • 0.5625 in (7)
  • 0.591 in (8)
  • 0.6102 in (8)
  • 0.625 in (65)
  • 0.6299 in (39)
  • 0.6551 in (5)
  • 0.689 in (11)
  • 0.7087 in (44)
  • 0.709 in (10)
  • 0.748 in (18)
  • 0.75 in (94)
  • 0.7874 in (8)
  • 0.8125 in (5)
  • 0.8268 in (7)
  • 0.8425 in (26)
  • 0.8661 in (29)
  • 0.875 in (63)
  • 0.8858 in (25)
  • 0.9375 in (5)
  • 0.9449 in (38)
  • 0.945 in (5)
  • 0.9843 in (11)
  • 1.0 in (79)
  • 1.0039 in (5)
  • 1.0236 in (35)
  • 1.0433 in (6)
  • 1.063 in (30)
  • 1.0929 in (5)
  • 1.1024 in (5)
  • 1.125 in (21)
  • 1.126 in (35)
  • 1.181 in (8)
  • 1.1811 in (69)
  • 1.25 in (144)
  • 1.2598 in (45)
  • 1.3138 in (5)
  • 1.3386 in (6)
  • 1.375 in (6)
  • 1.378 in (6)
  • 1.4055 in (29)
  • 1.417 in (13)
  • 1.4173 in (120)
  • 1.4961 in (30)
  • 1.5 in (149)
  • 1.5748 in (6)
  • 1.625 in (49)
  • 1.6535 in (13)
  • 1.654 in (6)
  • 1.689 in (31)
  • 1.7077 in (6)
  • 1.7323 in (5)
  • 1.75 in (18)
  • 1.7717 in (54)
  • 1.875 in (13)
  • 1.8898 in (81)
  • 1.89 in (7)
  • 2.0 in (46)
  • 2.0866 in (18)
  • 2.1014 in (7)
  • 2.125 in (12)
  • 2.1654 in (6)
  • 2.2244 in (24)
  • 2.25 in (126)
  • 2.252 in (30)
  • 2.2835 in (13)
  • 2.3323 in (7)
  • 2.36 in (5)
  • 2.362 in (5)
  • 2.3622 in (81)
  • 2.5 in (28)
  • 2.5291 in (6)
  • 2.625 in (5)
  • 2.8031 in (9)
  • 2.8228 in (12)
  • 2.874 in (44)
  • 2.95 in (5)
  • 2.9528 in (79)
  • 3.0 in (44)
  • 3.125 in (6)
  • 3.15 in (5)
  • 3.25 in (38)
  • 3.375 in (23)
  • 3.75 in (6)
  • 4.0 in (16)
Reach Min