DUO-LOCK Modular End Mills • Corner Rounding and Chamfering Solid Carbide Tips

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (25)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(25)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(25)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(25)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(25)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(25)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(25)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(25)
    • M Stainless Steel (25)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(25)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(25)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(25)
    • K Cast Iron (25)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(25)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(25)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(25)
    • N Non-Ferrous Materials (25)
      • N1
        Wrought Aluminum (25)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(25)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(25)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (25)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (25)
      • N6
        Carbon, Graphite Composites, CFRP (25)
      • N7
        MMC's (25)
    • S High-Temp Alloys (25)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(25)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(25)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(25)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(25)
    • H Hardened Materials (25)
      • H1
        Hardened Materials 44-48 HRC(25)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (12)
    • Concave Radius MillingConcave Radius Milling (13)
    • Shoulder MillingShoulder Milling (3)
    Cutting Diameter
    Cutting Diameter
    • 0.02 in(12)
    • 0.135 in(1)
    • 0.157 in(1)
    • 0.237 in(1)
    • 0.255 in(1)
    • 0.26 in(1)
    • 0.276 in(1)
    • 0.315 in(2)
    • 0.38 in(1)
    • 0.394 in(2)
    • 0.44 in(1)
    • 0.473 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 0.5 mm(12)
    • 3.426 mm(1)
    • 4.0 mm(1)
    • 6.0 mm(1)
    • 6.476 mm(1)
    • 6.601 mm(1)
    • 7.0 mm(1)
    • 8.0 mm(2)
    • 9.65 mm(1)
    • 10.0 mm(2)
    • 11.175 mm(1)
    • 12.0 mm(1)
    Cutting Diameter MintoCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 9.525 mm(4)
    • 10.0 mm(4)
    • 12.0 mm(5)
    • 12.701 mm(5)
    • 15.875 mm(2)
    • 16.0 mm(5)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.375 in(4)
    • 0.394 in(4)
    • 0.473 in(5)
    • 0.5 in(5)
    • 0.625 in(2)
    • 0.63 in(5)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 0.75 mm(1)
    • 1.0 mm(1)
    • 1.5 mm(1)
    • 1.526 mm(2)
    • 1.901 mm(1)
    • 2.0 mm(4)
    • 2.551 mm(2)
    • 3.0 mm(5)
    • 3.051 mm(2)
    • 3.176 mm(2)
    • 4.0 mm(3)
    • 4.525 mm(1)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.03 in(1)
    • 0.039 in(1)
    • 0.06 in(3)
    • 0.075 in(1)
    • 0.079 in(4)
    • 0.1 in(2)
    • 0.119 in(5)
    • 0.12 in(2)
    • 0.125 in(2)
    • 0.157 in(3)
    • 0.178 in(1)
    Cutting Length MintoCutting Length Max
    Reach
    Reach
    • 0.846 in(2)
    • 0.847 in(1)
    • 0.852 in(1)
    • 0.886 in(1)
    • 0.89 in(2)
    • 0.894 in(1)
    • 1.071 in(5)
    • 1.131 in(3)
    • 1.133 in(1)
    • 1.137 in(1)
    • 1.403 in(2)
    • 1.415 in(1)
    • 1.417 in(2)
    • 1.421 in(1)
    • 1.427 in(1)
    Reach MintoReach Max
    Reach
    Reach
    • 21.5 mm(2)
    • 21.526 mm(1)
    • 21.651 mm(1)
    • 22.5 mm(1)
    • 22.6 mm(2)
    • 22.701 mm(1)
    • 27.201 mm(5)
    • 28.701 mm(2)
    • 28.725 mm(1)
    • 28.75 mm(1)
    • 28.85 mm(1)
    • 35.6 mm(2)
    • 35.95 mm(1)
    • 36.0 mm(2)
    • 36.1 mm(1)
    • 36.25 mm(1)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (6)
    • 60.0 (6)
    • 90.0 (13)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Number of Flutes
    Number of Flutes
    • 4 (8)
    • 5 (10)
    • 6 (7)
    Over All Length [L]
    Over All Length [L]
    • 1.335 in(1)
    • 1.339 in(2)
    • 1.344 in(1)
    • 1.379 in(2)
    • 1.383 in(2)
    • 1.655 in(1)
    • 1.661 in(4)
    • 1.717 in(1)
    • 1.72 in(2)
    • 1.721 in(1)
    • 1.726 in(1)
    • 2.189 in(2)
    • 2.205 in(3)
    • 2.209 in(1)
    • 2.215 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 33.9 mm(1)
    • 34.0 mm(2)
    • 34.15 mm(1)
    • 35.0 mm(2)
    • 35.1 mm(2)
    • 42.0 mm(1)
    • 42.2 mm(4)
    • 43.6 mm(1)
    • 43.7 mm(2)
    • 43.725 mm(1)
    • 43.85 mm(1)
    • 55.6 mm(2)
    • 56.0 mm(3)
    • 56.1 mm(1)
    • 56.25 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Style
    Corner Style
    • CHAMFER (12)
    • RADIUS (13)
    Corner Radius
    Corner Radius
    • 0.0 in(12)
    • 0.03 in(1)
    • 0.039 in(1)
    • 0.06 in(3)
    • 0.079 in(2)
    • 0.119 in(3)
    • 0.12 in(2)
    • 0.157 in(1)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(12)
    • 0.75 mm(1)
    • 1.0 mm(1)
    • 1.5 mm(1)
    • 1.526 mm(2)
    • 2.0 mm(2)
    • 3.0 mm(3)
    • 3.051 mm(2)
    • 4.0 mm(1)
    Corner Radius MintoCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(19)
    • 1.901 mm(1)
    • 2.0 mm(1)
    • 2.551 mm(1)
    • 3.0 mm(1)
    • 3.176 mm(1)
    • 4.0 mm(1)
    Corner Chamfer MintoCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(19)
    • 0.075 in(1)
    • 0.079 in(1)
    • 0.1 in(1)
    • 0.119 in(1)
    • 0.125 in(1)
    • 0.157 in(1)
    Corner Chamfer MintoCorner Chamfer Max
    Back-End
    Back-End Diameter
    Back-End Diameter
    • 9.525 mm(4)
    • 10.0 mm(4)
    • 12.0 mm(5)
    • 12.201 mm(5)
    • 16.0 mm(5)
    • 19.05 mm(2)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.375 in(4)
    • 0.394 in(4)
    • 0.473 in(5)
    • 0.48 in(5)
    • 0.63 in(5)
    • 0.75 in(2)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO Catalog NumberGrade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?