C Style Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (5)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(5)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(5)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(5)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(5)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(5)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(5)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(5)
- M Stainless Steel (5)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(5)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(5)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(5)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (3)
- Lightly Interrupted Cut (5)
- Smooth Cut (5)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 4.0 (1)
- 8.0 (4)
to
Corner Radius
Corner Radius
- 0.008 in(1)
- 0.016 in(2)
- 0.031 in(2)
to
Corner Radius
Corner Radius
- 0.2 mm(1)
- 0.4 mm(2)
- 0.8 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Wiper Insert
Wiper Insert
- N (4)
- Y (1)
Insert Geometry
Chip Breaker CBMD
Chip Breaker CBMD
- FPS (3)
- FWS (2)
No filters matching ""
